Used Cycle Lathe for sale (8,438)

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Year: 2017 Some repairs have been carried out, and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are 'slightly' worn. Tool turret checked and adjusted. X-axis belt renewed and machine zero point set. Cgjdpfx Aaow I S Uue Esp Z-guides in the area of the chuck are slightly worn. Automatic band lubrication oil leak – troubleshooting completed, problem resolved, lubrication oil line renewed. 100% operational. Loaded free of charge. Immediately available. Location: 8740 Zeltweg, Austria

Condition: ready for operation (used), Conventional Meuser KM 2 engine lathe with lead screw and feed rod. Center height X/Y approx. 230mm/460mm, spindle bore: 62mm, speed range: 25-1600rpm, thread cutting: Meuser universal gearbox. Inspection by appointment possible. Cgodpfx Aoykutloa Eep

Condition: used, Year of construction: 2009, dist. between centers 4.500 mm greates pass round over bed 820 mm Maximum cutting diameter 530 mm control Heidenhain Manual Plus 4110 workpiece weight max. 2.500 kg spindle bore 128 mm spindle nose DIN 55027 B11 turning speed range - spindle 0 - 1800 U/min phase 1 0 - 450 U/min phase 2 20 - 1.800 U/min Max. torque stage 1 3.000 Nm Max. torque stage 2 540 Nm travel -x axis 360 mm travel -z axis 4.500 mm feed capacity - x 10 kN rapid traverse 10.000 mm/min dia. of quill 115 mm total connected load 55 kVA machine weight ab. 7000 kg dimensions of the machine ca. 6.500 x 1.840 x 1.860 mmxmmxmm Equipment/accessories: -1 x faceplate Cedjyhq Tvopfx Aa Eogp -5 x jaw chucks -1 x closed steady rest -Clamping jaws -Multifix holder -Turning tools -Various tips -Technical documentation

Condition: used, Year of construction: 1998, Technical details: Cedpfx Aajwwlt Re Eegp turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment *

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, turning diameter over cross slide: 300 mm, spindle bore: 80 mm, turning length: 1,500 mm, turning diameter: 300 mm, center height: 180 mm, bed width: 485 mm, total length: 3,700 mm, total width: 1,600 mm, total height: 2,000 mm, workpiece weight (max.): 4,000 kg, For sale: VÖEST-ALPINE lathe in operational condition. An external hydraulic unit is included in the offer. The machine functioned flawlessly until it was removed from service. Loading by arrangement is possible. Year of manufacture: approx. 1980. Codpjykb Iisfx Aa Esgp

Year of construction: 2001, condition: excellent (used), Control SIEMENS Swing over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 rpm Cedpfxslawako Aa Eegp tailstock multifix Accesories

Condition: excellent (used), Year of construction: 1994, Manual Plus control unit Turning diameter 260 mm Swing diameter 475 mm Cgodpfxot T T Urs Aa Ejp Center distance 1000 mm Turning length 880 mm Spindle speed 3,000 min-1 4-fold parat holder Tailstock

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 850 mm turning dia. over face-slide: 580 mm turning length: 4000 mm centre distance: 4000 mm faceplate diameter: 800 mm control: Siemens 810D revolution per minute: 1 - 1600 / 2 step U/min max. torque on the spindle: 6000 Nm feed motor: X= plan + Z= längs: 16000 / 20000 N rapid motion - x-axis: 4 m/min rapid motion - y-axis: 7 m/min spindle passage: 130 (Spindelkopf DIN 55027 Gr. 11) mm operating hours - idle run: werden noch ausgelesen h tailstock taper ISO: MK 6 tailstock quill stroke: 350 mm max. workpiece weight between centers: 5000 kg max. workpiece weight -without tailstock: 1800 kg interface: RS 232 / V24 voltage: 400 V / 50Hz V Cgodeu Ix Izjpfx Aa Esp control voltage: 24 V Gleichstrom V total power requirement: ca. 52 kW Weight approx.: 14,0 t dimension machine xH: 2,6 x 9,1 x 2,5 m Cycle lathe with Siemens cycle control Motor: 37kW, rated speed 1500 rpm; max. speed 6500 rpm; torque 235 Nm Two gear shift stages Stage II: Spindle torque 258.9 to 1364.6 Nm Stage I: Spindle torque 1050.4 - 5536.1 Nm Feed drive Three-phase servo drive 2x chip conveyor Double E-cabinet Quick-change steel holder parat Coolant device incl. various accessories see photo, as well as steady rest and 3-jaw chuck Ø 500mm Rota-S plus *

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 660 mm turning dia. over face-slide: 460 mm turning length: 1650 mm centre distance: ca. 2200 mm swing over bed: 660 mm swing diameter over slide rest: 460 mm swing diameter: in Kröpfung: 960 mm centre height: 320 mm control: Siemens 828 D ShopTurn x-axis: ca. 350 (plan) mm spindle bore: Ø 105 mm range of revolution per miute: 26-224 / 225-670 / 671-2.000 stufenlos U/min feed continuous: X: 0,5 - 3.000 mm/min feed continuous: Z: 1 - 3.000 rapid traverse x + z axis: 6 m/min tailstock taper MT: MK 6 quill stroke: 300 mm total power requirement: ca. 23 kW dimension machine xH: 4,2 x 2,3 x 2,3 m dimension swarf conveyor LxWxH: 2,3 x 1,7 x 1,3 m Chip conveyor includes cooling water tank with pump 3-speed manual gearbox with electronic gear shifting Tool holder according to/with Silent Tool Technology equipped (Capto C6) Manual control unit Foot switch Control panel Hydraulics automatic door closing (pneumatic) Accessories see comparable in the photo. Cjdpfsu Ix Nrsx Aa Eogp *

Year of construction: 1999, condition: ready for operation (used), A cycle-controlled precision lathe Weiler is available. Turning diameter over bed/slide: 570mm/340mm, center height: 280mm, distance between centers: 1000mm, turning length: 1000mm, spindle speed: 2500rpm, feed: 20mm/rev, machine dimensions X/Y/Z: approx. 3000mm/2000mm/1900mm, weight: approx. 3300kg. An on-site inspection is possible. Cedpfeyit Huox Aa Esgp

Year of construction: 2008, condition: ready for operation (used), A barely used cycle-controlled flatbed lathe Wagner with extensive accessories is available. Swing diameter over bed/face slide: 500mm/280mm, distance between centers: 1500mm, bed width: 350mm, speed: 3000rpm, travel X/Z: 295mm/1435mm, rapid traverse: 5m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm, quill diameter: 75mm, quill stroke: 150mm, quill taper: MK5, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1700mm, weight: approx. 3000kg, control: Siemens Sinumerik 802C base line, operating hours: approx. 1702h. Including various tools, coolant system, tool holders, 3-jaw chuck and several Parat tool holders. Documentation available. An on-site inspection is possible. Cjdpfx Aasyit Ifo Esgp

Year of construction: 1996, condition: ready for operation (used), Center height: 165mm, center distamnce: 600mm, turning length: 560mm, max. rotational speed: 3200/min, swing over surface/ bed: 200/ 315mm, weight: 1.8t. Codpfegrn N Rox Aa Esgp

Year of construction: 1986, condition: ready for operation (used), Turning diameter over bed/face slide: 360mm/160mm, center distance: 800mm, travel X/Z: 205mm/810mm, speed: 3150rpm, spindle bore: 60mm, tool positions: 8, rapid traverse X/Z: 10m/min. Machine dimensions X/Y/Z: approx. 3300mm/1800mm/1800mm, weight: approx. 3300kg, control: Traub System TX-8. An on-site inspection is possible. Cedpfx Aajwmqx De Eegp

Year of construction: 2008, condition: ready for operation (used), Turning diameter over bed: 300mm, max. workpiece length: 500mm/600mm, travel X: 319mm, feed X/Z: 3000mm/min/4000mm/min, rapid traverse X/Z: 4000mm/min/5000mm/min, speed: 4000rpm. Collet chuck: 5C 173E, spindle bore: 40mm, tool positions: 4, spindle travel of tailstock: 110mm. Machine dimensions X/Y/Z: approx. 2000mm/1450mm/1500mm, weight: approx. 1200kg, control: Fanuc Series 0i-TC. Including 380V transformer, Fluidtec spraying system, collet set and multifix holder set. Documentation available. On-site inspection is possible. Cgodou T Rifjpfx Aa Eep

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Cedpsxq Eyujfx Aa Ejgp

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Cgedpoua E Txjfx Aa Ejp

Condition: ready for operation (used), Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible. Cgjdpev Amrtsfx Aa Eop

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Cgedpfox Uq Uhex Aa Ejp

Condition: ready for operation (used), A cycle-controlled CNC lathe Microcut of the BNC series is available. Turning length: 2000mm, chuck diameter: 400mm, turning diameter over bed/cross slide: 610mm/330mm, spindle speed: 2500rpm, tool positions: 8. Machine dimensions X/Y/Z: approx. 4000mm/2300mm/1800mm, weight: approx. 4500kg. Documentation available. An on-site inspection is possible. Cedpfx Aasxr Nvij Ejgp

Year of construction: 1992, condition: ready for operation (used), Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible. Cjdpowxfaaefx Aa Esgp

Year of construction: 2006, condition: ready for operation (used), Turning diameter over bed/face slide: 500mm/290mm, face travel: 260mm, turning length: 1000mm, spindle bore: 70mm, speed: 3050rpm, torque: 920Nm, rapid traverse X/Z: 8m/min/10m/min, feed X/Z: 5m/min, quill stroke: 180mm, quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3400mm/2000mm/1850mm, weight: approx. 3100kg. Documentation available. On-site inspection is possible. Codpfx Aajvnd Tlo Eogp

Condition: excellent (used), Year of construction: 2012, Partially overhauled Heidenhain Manual Plus 620 control system Working area: Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Cross slide travel: 260 mm Centre distance: 1000 mm Turning length: 880 mm Main spindle drive Drive power – AC motor – 40% duty cycle: 25 kW Headstock Spindle nose DIN 55026: A6 size Spindle diameter in front bearing: 115 mm Spindle bore: 78 mm Speed range (constant V): 1 – 3000 rpm Cgjdpfx Aeyffigoa Eep Cross slide Feed rate, cross: 0.001 – 1000 mm/min Feed rate, longitudinal and thread cutting: 0.001 – 2000 mm/min Rapid traverse, cross/longitudinal: 5/10 m/min Tailstock Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: 5 MT

Condition: good (used), Year of construction: 1999, functionality: fully functional, very neat Monforts KNC 5 teach-in lathe in good condition year of manufacture 1999 0–2800 rpm max. turning length 1000 mm between centers max. turning diameter over cross slide 290 mm Cgjdpfx Aaoyh I Axo Esp max. turning diameter over bed 500 mm spindle motor 15 kW spindle bore 70 mm includes accessories and documentation machine is connected and ready for inspection.

Condition: good (used), Year of construction: 2000, operating hours: 21,594 h, functionality: fully functional, Gildemeister NEF 320 CNC teach-in lathe Heidenhain Manual Plus Year of manufacture: 2000 Machine operating hours: 21,594 Codpfx Aeyh Hg Noa Esgp Max. turning diameter over bed: 320 mm Max. turning diameter over cross-slide: 150 mm Max. turning length between centers: 750 mm Max. spindle bore: 50 mm Motor: 9 kW Spindle speed: 10–4,000 rpm Chuck: Rota-S Plus Multifix quick-change toolpost with tool holders Documentation and accessories Machine is powered up and available for inspection

Condition: excellent (used), Steadies for lathe VDF BOEHRINGER Type: V 800 1. Fixed steady 1. Travelling steady In very good condition. Csdpfoyfny Uex Aa Esgp