Used Ctx Beta 800 Tc for sale (10,128)

Condition: like new (used), Year of construction: 2024, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: CMXV1241149, Fully functional, only 2200 hours. Inspection is available at any time. Feel free to contact, will send you full specification for this machine. Was used at our production, no repairs at all. All paperwork in hands, machine is ready for export. Rsdpfeygdbqex Adajn

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Redpfjxy Tmnsx Adasn

Condition: excellent (used), Year of construction: 2015, Rainbold AZR 800s mill, in excellent condition Redeygdlcepfx Adaon

Condition: good (used), Year of construction: 1992, Machine-Details: Stock-No. 1022-2360 Type of machine Rotary Table Surface Grinding M/C-Horiz. Make ABA Type FRU 800 NC Year of manufacture 1992 Type of control NC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Redpfxeydc Rre Adaon Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Year of construction: 2016, condition: repair required (used), functionality: unexamined, HS 800 basic package Rodjvm Uqrepfx Adajn Spiral shaft screen deck AA209-150 Special paint finish: Green

Year of construction: 2021, condition: ready for operation (used), functionality: unexamined, Basic package Selector 800 Lower belt BB 1350 mm AA 6.4m -profiled belt- SPIRAL SHAFT SCREEN COVER AA254-150 - 16 shafts Rsdpfx Adovm Upneajn

Condition: used, Uncoiler, Sheet Metal Decoiler, Used machine Rjdpfx Asyc Spbedasn Manufacturer: GSW Schwabe AG Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: new, Year of construction: 2024, Special price: €45,000 (instead of €52,500) excl. VAT. Available immediately! Included Premium Features: - Heidenhain ND5023 3-Axis Position Readout - 5-Position Longitudinal Stop for the Saddle - SRW-Amestra Multifix C Quick-Change Toolholder with 4 Inserts - LED Workstation Lighting - Set of Spinelli Leveling Pads Standard Features: - Double Mechanical Clutch - Electromagnetic Brake - Rapid Traverses - Air Device on the Tailstock to Facilitate Movement Along the Bed - Cast Iron Bed, Legs, Headstock, Tailstock, and Slide - Bed Guides are Induction-Hardened and Ground - Headstock with Induction-Hardened and Ground Gears - Spindle Mounted on High-Precision Bearings - Friction-Free Slide Sliding - Electrical System in an Airtight Cabinet with Siemens and/or Schneider Components - Spindle Reduction Sleeve - 2 Dead Centers - Chuck Guard with Microswitch Turret Plexiglas guard, rear guard along the entire length of the machine, lead screw and feed rod guards, emergency stop button Redpfjpq R Rdex Adaon - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Follow and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operation and maintenance manual - Machine built according to EC standards Optional equipment: - 3-/4-jaw chuck Technical specifications - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speeds: 12 - Spindle speeds: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modular threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametrical pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock quill mount: MK5 - Total weight: 3200 kg

Condition: used, Year of construction: 1995, Gildemeister CTX-200 - CNC Lathe - Gildemeister/DMG CNC control system - 3-jaw chuck, Ø 140 mm - 12-position tool turret with driven tools - Work area lighting - Chip conveyor - 10,810 operating hours - Including various tools - Including operating manuals and documentation - Year of manufacture: 1995 Technical specifications Working area: - Swing diameter over bed cover: 440 mm - Swing diameter over cross slide cover: 210 mm - Cross travel: 160 mm - Longitudinal travel: 350 mm Spindle: Redjxy R Uispfx Adajn - Spindle nose diameter: 120 mm h5 - Spindle nose diameter at front bearing: 85 mm - Spindle bore: 56 mm - Chuck diameter: 140 mm Main drive: - Drive power (100/50% duty cycle): 7.5 / 11 kW - Max. torque: 58 / 84 Nm - Speed range: 25 - 5,000 rpm Feed system: - X-axis feed force: 200 daN - Z-axis feed force: 300 daN - X-axis rapid traverse: 12 m/min - Z-axis rapid traverse: 16 m/min - Measuring system: incremental rotary encoder Tool turret: - Universal disc turret, automatic indexing, directional logic - Number of tool stations: 12 - Tool holder shank (DIN 69880): 20 mm - Tool indexing time per station (30°): 0.48 s Universal disc turret with driven tools: - Number of tool stations: 12 - Max. number of driven tools: 12 - Max. clamping diameter for driven tools: 12 mm - Drive power (100/50% duty cycle): 2.5 / 3.0 kW Tailstock: - Quill diameter: 50 mm - Quill stroke: 120 mm - Quill taper: MT 3 - Max. quill pressure: 300 daN Machine dimensions: - Dimensions with chip conveyor (W x H x D): 3930 x 1690 x 1651 mm - Weight without chip conveyor: 2,950 kg Noise emission: - Constant workplace sound pressure level: 77 dBA

Year of construction: 2019, condition: used, functionality: fully functional, COMPLETE RUF 800 BRIQUETTING LINE + PACKAGING + PALLETIZING ABB – COMPLETE SALE ONLY For sale: a complete, industrial, fully automated line for the production of wood briquettes (sawdust briquettes), including packaging system, palletizing, and pallet storage. This line is intended for operation in a woodworking plant or briquette factory and enables complete process handling: briquetting → packaging → palletizing → pallet wrapping → storage. Sale only as a complete unit (individual components are not available separately). SET / LINE COMPONENTS Redpfoygcz Ajx Adasn 1) Briquetting Presses – 4 units • 4 × MALISZ RUF 800 briquetting presses • 2 pcs. manufactured in 2014 • 2 pcs. manufactured in 2016 • Intended for: industrial briquetting of sawdust / wood biomass • Application: briquette production for wholesale and export 2) Packaging line • MALISZ AVA 722/3L – year 2015 • Purpose: automatic packaging of briquettes post production 3) Automatic palletizing + wrapping • EUTO palletizing system • Robot: ABB IRB 460-110 • Dual station system • Integrated scales • Film wrapper: ROBOPACK MASTERPLAT PGS – year 2019 • Purpose: stacking briquette packs on pallets + preparing pallets for transport 4) Pallet storage • RUF roller pallet storage for briquettes – 56 linear meters • Purpose: transport and buffering of finished pallets within the facility €509,200 – price for the complete line (set) Sale only as a complete package – we do not sell individual components separately. ADDITIONAL INFORMATION • Industrial line – fully equipped briquette plant • Inspection possible by prior appointment • Assistance available for dismantling and loading (upon arrangement) Location: Czudec, Poland The offered equipment/machine is sold on EXW terms (PL – 38-120 Czudec) according to Incoterms 2020. Please contact us by phone (preferably via WhatsApp).

Condition: used, Year of construction: 2017, For sale: 2 units MALISZ RUF 800 briquetting presses / briquette machines – year 2017 (10/2017). Machines are in very good condition and ready to work. They were used in a woodworking production environment and are suitable for briquetting sawdust (especially hardwood sawdust). Quantity: 2 identical units available Technical data (from nameplates): • Manufacturer: MALISZ Maschinenbau (Germany) / RUF Briquetting Systems • Type / Model: RUF 800 • Year built: 10/2017 • Voltage: 400 V • Frequency: 50 Hz • Nominal current: 84 A • Protection class: IP54 • Machine numbers: 2666 and 2667 Rsdpfxeygcylo Adasn Included: • 2x briquetting press (machines only) • Full documentation available • Regularly serviced Location: Poland Price: 90,000 EUR per unit (possible to sell separately or as a set – to be discussed) Contact: please contact us by phone (preferably WhatsApp) for more details, photos or to arrange an inspection.

Condition: used, Year of construction: 2018, Overview  This automatic steam generator was manufactured in 2018 by German company Certuss. The Junior TC-300 is a gas-powered instant steam generator designed for reliable and efficient steam production. With fast startup capability and high efficiency, it is well-suited for breweries and beverage production plants. The equipment is available immediately and comes with essential accessories, including a water treatment plant and control components. Technical data  Capacity: 300 kg/h Pressure: up to 10 bar Power: 218 kW Efficiency: 91% Heating: Gas-powered Startup time: max. 5 minutes Control: PLC Rjdpfexcnnfox Adaen

Condition: used, Year of construction: 2017, Overview  The steam generator was built in 2017 by the German manufacturer Certuss. It is fired with gas and can deliver up to 300 kg/h. The unit was used in a German brewery. Was in operation till June 2025. Still assembled but disconnected from the gas pipe. Unit was only used once in a week during brewing, therefor the working hours are low. Technical specifications  Steam production max.: 300 kg/h Powered by gas Operating Pressure: 10bar Accessories  Filter Condensate recuperation Rodpfxewwaxzo Adaen

Condition: used, Used Vehicle * Vehicle No.: - * Mulag Boom Mower MHU 800 Year 2000 * Equipped with mulching head Redpfoup Nw Ijx Adaen * Driven by hydraulic system * Operated via 2 joystick consoles * Includes 4 support stands * Sale is on behalf of the customer ---- -> Please note that viewing is only possible by prior appointment. Thank you for your understanding. -> Sale is only to businesses or export. The above data, photos, and equipment list serve solely for the general identification of the vehicle and do not constitute a guaranteed specification in the legal sense of a purchase. All information/specifications are provided WITHOUT WARRANTY. Subject to change, prior sale and errors excepted! The equipment list does not form part of the contract and must be checked in detail on site at the vehicle by each prospective buyer before purchase. Subsequent claims will not be accepted.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 101402, type of input current: three-phase, input current: 50 A, input frequency: 50 Hz, input voltage: 400 V, power: 20 kW (27.19 HP), CEMB ZB200/TC/TA rotor balancing machine in good working condition. Used for rotors in sizes 160-250. Fully operational. Last test on 17/04/2025. Rodpfjygbfgsx Adaen

Condition: used, mileage: 340,585 km, power: 155 kW (210.74 HP), first registration: 06/2019, fuel type: diesel, empty load weight: 7,560 kg, maximum load weight: 4,430 kg, overall weight: 11,990 kg, axle configuration: 4x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 41 m³, loading space length: 7,325 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, cooling unit, cruise control, electronic stability program (ESP), onboard computer, soot filter, tail-lift, traction control, Yourtrucks Group The Yourtrucks Group maintains business relationships worldwide. Both purchasing and sales activities extend beyond national borders; therefore, our listings generally show the export price, which is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is regularly updated. This information is intended as non-binding general information and does not replace detailed, individual advice when making a purchase decision. Only the terms included in the purchase contract are binding. Subject to changes, errors, typographical mistakes, and prior sale. Our general terms and conditions apply exclusively. Languages Rsdsxxiwaopfx Adaon - We speak English - Nous parlons français - ?? ????? ?? ???? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: good (used), axle configuration: 3 axles, first registration: 05/2020, suspension: air, color: grey, Year of construction: 2020, Axle configuration Make axles: Renders Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle Weights Empty weight: 5.600 kg Carrying capacity: 37.400 kg GVW: 43.000 kg Functional Extendable superstructure: Yes Condition Technical condition: good Visual appearance: good Additional information Rsdpfxsyc E A Us Adaon Please contact Arie or Pedro for more information

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,252 h, spindle speed (max.): 4,000 rpm, spindle motor power: 17,500 W, controller manufacturer: SIEMENS, controller model: 840D SL, number of axes: 2, This DMG CTX 450 V3 horizontal turning machine was manufactured in 2014. It features a Siemens 840D SL CNC control, a 12-position VDI 40 tool turret with driven tools, and a high-torque main spindle. The compact design includes side chip discharge and a heavy-duty hydraulic tailstock. Ideal for high-precision turning, it also has a bar machining capability with a maximum bar diameter of 65 mm. Contact us for more information about this machine. • Control: Siemens Sinumerik 840D SL with ShopTurn; Ergonomic SlimlinePanel; Ethernet and USB data transfer; graphical support; ProgressLine & PlanOnLight; electronic cycle-time and part-count display • Tool system: 12-position servo turret, VDI 40; 12 driven tool stations (DIN 5480 coupling); possibility to mount 6 BT toolholders on turret periphery • Measuring systems: Direct measuring systems on X and Z with air-purge protection • Spindle & workholding: Main spindle 17.5 kW / 370 Nm (40% ED), up to 4000 rpm; bar machining through spindle; max. bar diameter 65 mm; chuck with through-hole clamping mechanism • Tailstock: Heavy-duty hydraulic tailstock, programmable with two selectable feed speeds • Axes/guides: Linear guides on all axes, width 45 mm; rigid machine bed; high positioning accuracy • Footprint/chips: Compact footprint; chip discharge from the side Rodjx E Eaaspfx Adasn • Lighting: Integrated LED work area lighting • Coolant: High-pressure coolant pump 12 bar; manual coolant flushing gun 5 bar Additional equipment • Chip conveyor (included)

Condition: ready for operation (used), A manual clipping machine Tecno Brianza Brevetti Clippatrice H2 is available. Products: sausage products, casing types: natural casings/artificial casings/synthetic casings, clipping capacity: approx. 600pieces/h, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1750mm, weight: approx. 100kg. On-site inspection is possible. Rjdpeyf I Ifsfx Adajn

Condition: ready for operation (used), empty load weight: 7,000 kg, + 3 freeskoppen Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 800 mm Max travel Z-axe: 500 mm Power on spindle: 15 HP / 11 kW Type of millinghead: ISO 50 Spindlespeeds: 31 > 1400 rpm Table size: 2000 x 600 mm Redpfxoycy Ekj Adaen Digital screen: Heidenhain 3 axes

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Rjdpfowxz D Uox Adajn Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Condition: used, Year of construction: 2001, operating hours: 74,900 h, functionality: fully functional, machine/vehicle number: 01180001301, turning length: 1,100 mm, turning diameter over cross slide: 600 mm, turning diameter: 600 mm, spindle motor power: 23,000 W, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 80 mm, travel distance X-axis: 320 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 1,097 mm, rotational speed (max.): 3,600 rpm, bar passage: 72 mm, feed rate X-axis: 24 m/min, feed rate Z-axis: 30 m/min, total height: 2,130 mm, total length: 5,560 mm, total width: 2,400 mm, overall weight: 8,700 kg, controller manufacturer: Heidenhain, controller model: CNC Pilot 3190, nominal power (apparent): 58 kVA, workpiece diameter (max.): 600 mm, Equipment: documentation/manual, Main spindle – tailstock – steady rest Part catcher with conveyor belt Rodpfoxugrmex Adajn Spindle reduction, diameter 12–70 mm 200L coolant tank 20 soft jaws, 1 hard jaw, 2 gripper jaws 12 tool stations – 6 of them powered 3x axially driven tool EWS 3x radially driven tool EWS Operating hours 74,900 – Spindle hours not displayed Travel X 320 mm Y+/- 50 mm Z 1,097 mm Distance between centers 1,285 mm Extraction unit Control: Heidenhain CNC Pilot 3190 – Software V5.3 Max. speed of driven tool: 4,000 rpm 6x revolving centers Tool measuring system – Marposs

Condition: used, functionality: fully functional, saw band length: 5,550 mm, saw band width: 80 mm, type of input current: three-phase, cutting height (max.): 400 mm, table width: 1,060 mm, table length: 800 mm, working height: 400 mm, input voltage: 400 V, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: Rodpfew H Rq Hsx Adasn - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: excellent (used), Year of construction: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of Manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Rjdpfsyctw Tsx Adajn Dosing volume: 392 cc Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping unit: toggle lever Control System: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pull x 2 Controller with 12 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by inverter – energy saving Injection unit driven by a servo motor, controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication system Parallel motions Arburg Multilift Select robot, 6 kg transverse Year of manufacture: 03.2011 4-axis robot: 3 axes driven electrically by servo motors; C-axis pneumatic Travel distance in axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and safety enclosure The purchase of the robot and conveyor belt is available for an additional charge Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2008, Arburg 520S 1300-800 / machine in very good technical condition Rodpsyctt Ujfx Adaon Year of manufacture: 2008 injection unit: screw diameter: 50 mm injection weight: 359 g Injection pressure: 2000 bar Metering volume: 392 ccm Clamping unit: clamping force: 130 t tie bar distance: 520x520 mm size of clamping platens: 695x695 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 injection unit hardened - bimetal The machine was regularly serviced by the authorized service Arburg in Germany Dimensions: Weight: 6450 kg Length/width/height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request