Used Ctp Thermal for sale (1,372)

Year of construction: 2002, condition: repair required (used), ULMA, year of manufacture 2002 • Extended infeed conveyors. • Centralized lubrication. • Sanitary clean out the tray. • Gravity and motorized exit conveyors: inline, 90º, 180º, ... • Additional 1 meter sealing device. • Automatic image centring device for printed films. • Printed band attachment. • Transparent tray detection. • Sealer Cooler. • Others (Ask). A high-performance wrapping machine, specially developed for the wrapping of trays in central processing facilities (meat, poultry, fish, vegetables, fruits) and high volume supermarkets. A large range of models for customer requirements. Its strength, reliability, ease of operation, and automatic size change, make it the most automatic size change, make it the most productive and versatile machine available, possibility to wrap with several kinds of film: PVC, polyethene and polyolefines. Chedpfxjg H Tquj Afgec TECHNICAL FEATURES (Depend on the model) • 1 or 2 film rolls with automatic roll selection. • Automatic recognition of the tray dimensions or manual. • Automatic or manual selection of film length and width. • Universal elevator. • Self-diagnostic capability. • Film tension control. • Forward and reserve jog capability. • 4-way film stretch with lateral pre-stretch. • Temperature control for the sealing belt. • Oversize package detector. • Mechanical torque limiter. • Guards and safety devices according to international standards. • Heavy duty construction with corrosion-resistant material. Power supply: 380 V, 12 kW Bizerba GV labeller, manufactured in 2002 Bizerba 18A scale with Bizerba AB display. Automatic labelling and weighing system for products packaged in the food area. Electric power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Compressed air supply of the blower label: air pressure: 6 bar, air flow: min. 100 l / min, compressed air. without oil, filtered at 10 µm, Label dimensions: 100x100. The separation between labels: from 2 to 20 mm. Thermal print head - resolution of 8.0 points Weighing from 1gr to 6000gr. Maximum labelling capacity 60 packages/minute. Equipment prepared for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment was reviewed, rebuilt, and guaranteed with the following maintenance: change of conveyor belts, thermal print head, and engine belts. High-quality equipment and great performance in terms of speed and reliability. The label and the scale are mounted on an output conveyor belt. Weighs at least 40 g up to a maximum of 18 kg For the Romanian companies, there is the possibility of selling in instalments. Price upon request, FCA: Oradea/Romania We sell this line refurbished Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2014, condition: good (used), power: 260 kW (353.50 HP), color: yellow, machine/vehicle number: 214034, Painting-drying booth with semi-vertical air flow "ITALO-1-SV", brand Lackro, manufacturer Eco-Air Technology S.R.L. Italia, year of manufacture: 2014 Cabin interior dimensions: length 14.06 m X width 5.04 m X height 4 m, maximum air flow: 40-45000 mc/h, thermal power: 260 Kw, fuel: diesel, installed electric power: 26 Kw three-phase, tank fuel included, the cabin has a special lighting system, 30 superior filter cells for purification with carbon, dimensions: 500x500x50 mm, side service door, two central hinged doors, trolley for parts, burner chimney on diesel, the cabin has the user and maintenance manual Attention customers: this cabin will be delivered disassembled and loaded for transport from our company headquarters in Oradea. Industrial drying painting cabin "ITALO-I-SV" MOD. ECO – L=14,060 mm x w=5,040 mm x H=4,000 mm with semi-vertical air flow Suction group Suction and filtration unit ECO-SM-5 Maximum air flow at 250 Pa m3/h 40,000-45,000 Chedpjp S Tlhofx Afgjc Maximum thermal power kW 260 VATRA 232 Fuel type DIESEL Installed three-phase electric power: kW (2x7.5) +(2x5.5) Filter cells 500 mm x 500 mm x 500 mm 30 pieces Bag filter Ǿ 280 x 1000 mm pieces 10 Ceiling grid 975 x 1855 mm 28 pieces Generator pre filters 1,000 mm x 800 mm x 50 mm pieces 2 Andreae suction wall filter 0.9 m x 5 m pieces 3 The maximum size of the piece in the cabin L=12 m x w=3 m x H= 3.2 m For any details, do not hesitate to contact me by phone. Price 79.900 Euro + VAT, Ex Works Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1991, HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced "Ultra-Clean" hygienic technology, ensuring extended product shelf life and uncompromising safety. Key Performance Capabilities - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity). - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling. - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ideal for puddings with toppings, yogurts, and layered desserts. Chjdpfx Aozqtkzefgsc Advanced Hygiene & Ultra-Clean Standards - Contamination Control: Equipped with integrated sterile air and containment enclosures to safeguard open product zones. - Container Sterilization: Employs specialized sterilization modules (such as steam, UV, or chemical sanitization) to treat cups and lidding foil prior to filling. - CIP/SIP Ready: Designed for seamless integration into Clean-in-Place and Sterilize-in-Place plant loops to minimize changeover downtime. * Station 1: Cup station Station 2: For level control and for double or missing cup Station 3: H2O2 disinfection station for cups * Station 4: Filling station Station 5: Aluminum lid H2O2 disinfection station * Station 6: Thermal sealing station * Station 7: Expiration date print station * Station 8: Integrated gripper

Condition: used, Year of construction: 1996, Manufacturer: Vulcanic Model: Vulcatherm Catalogue number: 829721-01 Type: Temperature controller Date: 1996   Weight: 210 kg Csdox R A A Nspfx Afgjhc Max. pressure: 10 bar G Max. temperature: 90 °C Thermal fluid: water  

Condition: used, mileage: 951,319 km, power: 235 kW (319.51 HP), first registration: 01/2012, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: semi-automatic, emission class: euro5, loading space length: 6,690 mm, loading space width: 2,480 mm, loading space height: 2,810 mm, Year of construction: 2011, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Construction Body/Superstructure: Flatbed/Curtain-sided + Crane, Codpfxszqw E Aj Afgshc * Flatbed dimensions i.e. 6,690mm x 2,480mm x 2,810 mm * Storage compartments, * Lifting roof, * Roller cover at the rear, * Vehicle with low frame height, * Air deflector on the roof including wind deflector, Crane: * Atlas crane 126.3E, * Radio remote control, * 2-point outrigger, Reach/Lifting capacity: * 5.9 m = 3,200 kg, * 8.5 m = 2,120 kg, * 11.2 m = 1,600 kg, * Auxiliary drive MB 2C, Equipment: * Cab: Megaspace, * Telligent transmission, * Climate Plus package, * Additional thermal insulation, * Extendable cool box, * Driver's seat: Air-suspended, air-conditioned seat, * Sunblind for side windows, * Air horn, * Tow hitch + trailer brake 2-line, * Fuel tank: 500 liters, aluminum, Technology: * Audio system: CD radio (Bluetooth), * Circuit breaker, * Exterior mirrors electrically adjustable and heated, * Outside temperature display, Safety/Environment: * Retarder Voith, * Airbag, driver side, * Telligent braking system with ABS+ASR, * Driver assistance system: Brake assist (Active Brake-Assist), * Driver assistance system: Lane keeping assist, * Telligent roll control, * Telligent distance control, * Differential lock, rear axle, * Emission standard EURO 5, Other: * German initial delivery, * 1 previous owner, * Axle configuration: 4x2, * Suspension: Air / Air (Full air), * Engine 12.0 Ltr. - 235 kW V6 Diesel (OM 501 LA), * Wheelbase 5400 mm, * Permissible total weight 18.00 t Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen interchange. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock from the fields of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! Trade-in of your commercial vehicle/construction machine is welcome. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, price tags, and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/guarantee for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: excellent (used), functionality: fully functional, Sauce Mixer / Tilting Process Vessel | Industrial Mixing Vessel Chsdpjzz Am Hsfx Afgjc Type: Sauce Mixer / Tilting Process Vessel Internal drum diameter: 990 mm Drum depth: 1000 mm This industrial sauce mixer (process and mixing vessel) is designed for large-scale thermal processing and dynamic mixing of liquid and semi-liquid food products. The machine is ideal for the production of sauces, marinades, vegetable fillings, ready meals, and soups. The rotating and tilting drum made of acid-resistant steel ensures even mixing of the ingredients without damaging the raw material's structure and allows for quick and hygienic unloading. The process is controlled via a B&R Power Panel touchscreen, ensuring precise control of operating parameters and high reliability of the automation system. The included mobile trolley on wheels is used for the safe installation, storage, and transport of the mixing frame with scrapers. This solution significantly facilitates the cleaning, disinfection, and retooling processes outside the working area.

Condition: new, maximum load weight: 30,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,050 mm, Year of construction: 2026, Equipment: ABS, Schmitz SKI 24 SL 7.2 Thermo steel tipper body 24.6 m³ * Body length: 7,480 mm * Body width: 2,354 mm * Volume: 24.6 m³ * Tyres: 6 x 385/65R22.5 * Satin-finish ALCOA aluminium rims * Fifth wheel height: 1,250 mm Chjdpfxsw U Hv Tj Afgoc * Wheelbase: 4,800 mm * Extra-lightweight chassis frame * Folding underrun protection * Hyva hydraulic cylinder * Schmitz axles with air suspension and disc brakes * Paver brake * Automatic lowering during tipping process * Air bag pressure gauge * LED lighting * 2 LED reversing lights * Full thermal insulation * Prepared for electronic measurement technology * Tailgate with additional tension locks * 5 mm steel floor * 4 mm steel side walls * Roof tarpaulin with quick-release fastener * Chassis hot-dip galvanized * Tarpaulin colour: WHITE RAL 9010 * Body colour: WHITE ALUMINIUM RAL 9006 * ... For further information, please feel free to contact us! Available from October also with electric sliding roof.

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: grey, gearing type: automatic, emission class: euro6, number of seats: 9, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, - To ensure you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Optional equipment: A50 Front axle with increased load capacity, BH1 HOLD function, CK8 Steering wheel heating, CL3 Leather steering wheel, CM0 Painted bumpers, EY2 Digital extra: Live Traffic Information, E1E Digital extra: Hard disk navigation, E43 Trailer socket 13-pin, FF0 Coat hooks in the passenger compartment, FG8 Cupholders front, FJ5 Folding cover for storage compartments left and right, FM3 WET WIPER SYSTEM, FY7 Multi-button remote control, G43 9G-TRONIC, H04 Thermal insulation driver's cabin, H08 Reinforced roof air conditioning, H12 Hot water auxiliary heating, H13 Additional heater for the rear, H15 Seat heating for passenger, H16 Seat heating for driver, H21 Heat-reflecting glass with band filter on the windshield, JA9 Traffic sign assistant, JB7 Parking package with rearview camera, LB9 Exit lights, LG7 LED High Performance headlights, L1D Roof control unit with bus interior light control, L22 Rear lights with partial LED technology, M61 Generator 14 V / 280 A, P3Z Winter package Plus, RH2 Tires 235/65 R16 C, SB2 Comfort passenger seat, T55 Electric actuation for sliding door on the right, U26 Pre-installation for seat configuration 2/2/3, U60 2-seater bench seat in the 1st row in the rear, U61 2-seater bench seat in the 2nd row in the rear, U64 3-seater bench seat in the 3rd row in the rear, U74 Armrests on wall side, U75 Armrests on aisle side, VA5 Full paneling of rear swing doors, V21 Interior paneling luxury, V31 Window pillar paneling, V4A Full paneling of right rear sliding door, W70 Tinted glass in the rear, black glass Standard equipment: AR2 Axle ratio i = 3.923, BA3 Active brake assist, CB1 Suspension for comfort and cargo protection, CB7 Stabilization level I, CL1 Steering wheel adjustable in inclination and height, CN2 Radiator grille frame in vehicle color, CT1 Vibration damper, CW2 Deletion of vehicle lowering, C6L Multifunction steering wheel, D03 High roof, ED4 Fleece battery 12 V 92 Ah, ES0 Jump start assist, ES2 12 V socket in trunk / cargo area, ES5 Charging package dashboard, EW6 Digital extra: Remote Services Plus, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, E07 Hill start assist, E1D Digital radio (DAB), E1U USB socket 5 V, E30 Battery main switch single-pole, E4S Digital extra: Smartphone integration, E7M MBUX multimedia system, FF5 Storage compartment above windshield, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under cockpit, F61 Interior mirror, F64 Exterior mirror electrically foldable, F68 Exterior mirror heated and electrically adjustable, HH2 Electric auxiliary heating with warm air, HH9 Semi-automatic controlled air conditioning TEMPMATIC, H00 Warm air duct to passenger compartment, H1I Wide-angle nozzles in I-panel, H22 Heated rear window, JA7 Blind spot assist, JA8 Crosswind assist, JB4 Active lane keeping assist, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK5 Instrument cluster with color display, JK8 Driver camera, JW8 ATTENTION ASSIST, J10 Speedometer km/h, J55 Seatbelt warning for passenger seat, J58 Seatbelt warning for driver's seat, J65 Outside temperature display, KB7 Main fuel tank 93 liters, LA1 High beam assist, LA2 Headlamp assist, LB1 Lateral marker lights, LB5 3rd brake light, LC4 Comfort roof control unit, LE1 Adaptive brake light, L21 Reversing ligh Chedszwlqaepfx Afgsc

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Applications The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: sanding machines, panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Cedpfx Afsuc U N Uogohc Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 070826, Equipment: CE marking, NEW Equipment for feeding defrosted fish raw materials to the blanching area Equipment for blanching fish raw materials - Provide mechanized or manual delivery of fish raw materials (arranged in one or more layers) to the heat treatment area; · Provide heat treatment (blanching) liquid of fish raw materials (a mixture of water, salt water, water vinegar) or in a steam environment; · The speed of the blanching conveyor is variable; · The blanching temperature is adjustable (50-100 C) and constant maintainable; · Impact insulation provided in the blanching area to prevent heat loss; · Ensure continuous supply of thermally processed fish raw materials and packaging area; Chjdpjv Dftxofx Afgoc · Provide water or steam connections and the possibility of draining overflow liquid or condensate and blanching liquid directly into the sewage system; Blanching power 600 kg per hour (If you need more, you can write, but send us the layout of the manufacture place.) Equipment for dosing fish raw materials in cans and packing cans - Equipment, (can dispenser for Hansa cans type), which provides a can sequential feeding to the raw material dosing area. Speed ​​min. 75 up to 90 cans/min. · Equipment that provides semi-automatic dosing of blanched fish raw materials in cans: manual placement of raw materials in the portioning area, mechanized portioning and mechanized dosing of the fish portion in a box. The operating speed of the line must be matched with the operating speed of the cans dispenser. Permissible deviation +- 4 grams Equipment for the accumulation of filled cans, which allows the accumulation of at least 2 min of packing capacity, min 150 cans; · Equipment that provides continuous weighing of cans with the possibility of diverting cans that are below the permissible deviation of the specified weight to the forgiving conveyor, and ensures the return of cans to the flow after the forgiving; · The equipment is easy to service and sanitary. · Number of employees servicing the equipment: 4 employees Automatic control unit - Provides automated equipment control and the ability to adjust the speed of equipment operation. ​Technical Maintenance & Stability: We provide expert maintenance, diagnostics, and spare parts availability to prevent unplanned downtime and ensure your lines run smoothly. Equipment: You can send separate parts if needed. 1- Fillet conveyor – 1pcs 2- Blanching conveyor line – 1pcs ( Blanching area 10m ) 3- Fillet dosing machine – 1pcs 4- Checkweigher – 2pcs 5- Can dispensing machine – 2pcs 6- Rotary table – 1 pcs 7- Conveyor line – 8pcs All line: 24m long Uses The line is designed for blanched fish fillets. Automatic filling of blanched fish fillets into "Hansa" type cans and weight control with feeding to the capping machine.

Condition: excellent (used), Year of construction: 2019, 3 x Miyano ABX-51SYY2 Years: 2016, 2018, 2019, 2021 Alps ASR RX45/51EV automatic bar feeder Fanuc 31i-B CNC Control Swarf coveyor Codpfxezq Aqdo Afgshc Twin Spindles Twin Independent 12 Station Turrets Full Y-Axis on both Turrets Driven Tooling T Thermal Compensation Tooling package Operating manuals Service history (where available) Barloader Alps Tool ASR RX 51Ev Machines available in October 2026

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: Chodozp Rmqspfx Afgsc - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, FOR SALE — SEMI-AUTOMATIC ANODIZING LINE BY DRABEX Codpfxezkivge Afgehc PRICE: PLN 630 000 Complete semi-automatic aluminium anodizing line for sale. The line is currently switched off and awaiting a buyer. It allows anodizing of aluminium profiles up to 6.20 m in length. Basic information: Tank length: 6.80 m. Tank width: 0.5 m to 1.4 m. Footprint required: 25 m x 10 m. Capacity in 3-shift operation: 2000 m². Line type: semi-automatic anodizing line. Line stations: Nr 1 – Loading and unloading Nr 2 – Hot rinse — 10 m³, gas diaphragm heating, thermally insulated tank Nr 3 – Rinse — 10 m³ Nr 4 – Sealing — 20 m³, tank with bubbler, galvanic filter connected Nr 5 – Rinse — 10 m³ Nr 6 – Rinse — 10 m³ Nr 7 – Rinse or electro-colouring — 20 m³, tank without equipment Nr 8 – Rinse — 10 m³ Nr 9 – Rinse — 10 m³, tank with bubbler, spray Nr 10 – Rinse — 10 m³ Nr 11 – Degreasing — 20 m³, gas diaphragm heating, tank with bubbler Nr 12 – Satin etching — 10 m³, tank with bubbler, diaphragm cooling, electric heating 3 x 5 kW Nr 13 – Satin etching — 10 m³, tank with bubbler, diaphragm cooling, electric heating 3 x 5 kW Nr 14 – Warm rinse — 10 m³, tank with bubbler, electric heating 2 x 5 kW Nr 15 – Warm rinse — 10 m³, tank with bubbler, electric heating 2 x 5 kW Nr 16 – Rinse — 10 m³, tank with bubbler Nr 17 – Rinse — 10 m³, spray Nr 18 – Deoxidising — 10 m³, spray Nr 19 – Rinse — 10 m³, spray Nr 20 – Anodizing — 20 m³, tank with bubbler, galvanic filter connected, 22V / 7000A rectifier and plate heat exchanger with 150 kW cooling capacity, chiller unit 100 kW Nr 21 – Anodizing — 20 m³, tank with bubbler, galvanic filter connected, 25V / 8000A rectifier and plate heat exchanger with 150 kW cooling capacity, chiller unit 100 kW Interested buyers are welcome to get in touch. Referral reward: PLN 20,000. I will pay PLN 20,000 to whoever introduces the buyer who finalises the purchase, payable after full payment is received and the contract is signed.

Condition: used, Consisting of: “Thermopac - WANSON” thermic oil installation Type 200B 10 FT container natural gas burner power: 233 kW 3 x 400 V, 50 Hz 7.5 kW dimensions (L x W x H): ± 3,000 x 2,450 x 2,600 mm + Cedpfx Afjzzwmhogshc Thermal oil pump Bathyscaphe Flue gas exhaust stack + “GEA-CFS” fryer Type BR 6000/600 all stainless steel suitable for thermal oil heating infeed height : ± 900-950 mm outfeed height : ± 1.150 mm max. oil level above the belt : 120 mm suitable for fire protection with top hold down belt Oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with electrical hoists dimensions (l x w x h) : ± 8.700 x 2.200 x 3.800 mm “Saval” fire suppression system + Paper filter Type OMR 120-60 50 Hz - 400 V 4.5 kW 525 kg dimensions (L x W x H): ± 2.800 x 1.700 x 2.200 mm + Cooling conveyor with ambient temperature all stainless steel variable speed 50 Hz, 400 V 2.61 kW net conveyor length ± 6.000 mm net conveyor width ± 900 mm wire mesh belt (3 mm) dimensions (L x W x H): ± 7.600 x 1.700 x 2.000 mm

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 15 h, functionality: fully functional, machine/vehicle number: ET.200.01.2025, overall weight: 134 kg, input voltage: 220 V, input current: 21 A, type of input current: AC, warranty duration: 24 months, Equipment: documentation/manual, METALSELF ET-200 Automatic Orbital Welder + EC-120 Welding Head Ex-Demo (-40%) DESCRIPTION: MACHINE CONDITION: We offer for immediate delivery a Metalself orbital TIG welding system consisting of an ET-200 power source and an EC-120 closed-chamber welding head. The machine (manufactured in 2025) is in LIKE-NEW condition: it has never been used in production and was used exclusively as an internal demonstration unit. Due to its "Ex-Demo" status, the entire system is offered with an exceptional 40% discount on the list price. SYSTEM OVERVIEW: The system automates TIG welding on thin-walled pipes, performing a complete 360° rotation around the joint. It is the ultimate solution for industrial piping, fluid, food, and pharmaceutical systems, ensuring perfect repeatability, impeccable aesthetics, and weld seams free of defects. POWER SOURCE SPECIFICATIONS (ET-200): -Technology: Microprocessor-controlled inverter for millimeter-precise arc control. -Welding current: 5 ~ 200 A. Modes: Direct Current (DC) and Pulsed, ideal for thermal control on stainless steel and titanium. -Interface: Intuitive touch screen with an "Auto Prog" system that automatically generates parameters by simply entering the tube diameter and thickness. -Capacity to store 200 programs. Cooling: Integrated water circulation system. Quality Control: Integrated thermal printer on the machine and USB port for exporting welding reports. -Power supply: 220VAC ±10% - 50/60 Hz (Consumption 4.5 KVA). -Dimensions and Weight: 500 x 380 x 300 mm; 28 kg. WELDING HEAD SPECIFICATIONS (EC-120): -Type: Orbital welding head with closed chamber. -Operating diameter range: from Ø 19 mm to Ø 114.3 mm. -Maximum penetration thickness: ≤ 3 mm. -Shielding gas: Argon. -Cooling: Water-cooled. -Welding head dimensions: 540 x 195 x 54 mm. -Welding head weight: 6.5 kg. THE SUPPLY INCLUDES: -ET-200 power source and EC-120 welding head. -Dedicated trolley for easy and safe movement of the system in the workshop. -Power cables, control connections, ground clamp, and hydraulic/gas tubing. -CE Declaration of Conformity. -Complete user and maintenance manual (including parts list and programming instructions). Chodpfx Ajzw Uh Usfgoc SALE CONDITIONS: -Price: -40% compared to the new list price. -Delivery: Ex Works (EXW) in Settimo Torinese. -Availability: Immediate. The machine can be viewed at our facility and is available for any testing or practical demonstration.

Condition: excellent (used), Year of construction: 2018, 544 USED Wachtel Compact 1.8F rotary trolley oven. Oven for 60x80 or 58x78 baking trays. EQUIPMENT: - gas burner - 2 baking trolleys 58x78 TECHNICAL DATA: - year of production: 2018 - thermal power: 81kW The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Csdpfxez Atygj Afgshc ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2008, 548 USED Wachtel Compact 1.8F rotary trolley oven. Oven for 60x80 or 58x78 baking trays. EQUIPMENT: - gas burner - 2 baking trolleys 58x78 Codpfez Atytjx Afgohc TECHNICAL DATA: - year of production: 2008 - thermal power: 81kW The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), mileage: 13,881 km, power: 125 kW (169.95 HP), first registration: 10/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, CO₂ emissions: 249 g/km, fuel tank capacity: 93 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 9, emission class: euro6, number of seats: 3, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, airbag, cruise control, electric window regulation, fog lights, navigation system, power mirror, seat heater, sliding door, start-stop system, = Other options and accessories = - 2-pedal control - 7 inch touchscreen - Attention assist Cjdpfx Asyngfzsfgehc - Outside temperature display - Heated side mirrors - Passenger airbag - Cargo area lighting - Hill start assist system - Carkit - Stability class 1 - DAB radio - Third brake light - Entry step rear bumper - EURO 6 - Driver airbag - Height-adjustable steering wheel - Front center armrest - Rain sensor - Immobilizer - Steering wheel shift paddles - Thermal glass - Blind spot assist - Two rear doors - Partition wall without window = Further information = General information Number of doors: 5 Cab type: single Technical information Number of cylinders: 4 Engine displacement: 1,950 cc Transmission: 9G-Tronic, 9 gears, automatic Front axle: steered Weights Unladen weight: 2,130 kg Payload: 1,370 kg Gross vehicle weight: 3,500 kg Max. towing capacity: 2,000 kg (unbraked 750 kg) Consumption Average fuel consumption: 9.5 l/100km Urban fuel consumption: 10.9 l/100km Extra-urban fuel consumption: 8.3 l/100km Maintenance, history and condition APK (periodic technical inspection): New inspection at delivery Technical condition: very good Optical condition: very good Warranty Warranty: 12 months Further information Contact Lorenz Schoutteet for more information.

Condition: new, Year of construction: 2026, functionality: fully functional, Automatic carton sealing machine with label printing | 220V | NEW Description For sale is a new automatic carton sealing and labeling machine for professional use in shipping, logistics, e-commerce, fulfillment, and production. The system combines automatic carton sealing with adhesive tape with an integrated real-time label printing system. This allows cartons to be sealed and then labeled with individually generated labels within a single process. According to the manufacturer, the integrated thermal printing system supports barcodes, dates, logos, and other variable label information. Ideal for companies with regular package and carton shipping, as well as for integration into existing packaging and conveyor systems. Technical data according to the manufacturer: Capacity: approx. 800–1,000 cartons/hour Carton length: from 130 mm Carton width: 80–300 mm Carton height: 90–400 mm Adhesive tape width: 30–50 mm Power supply: AC 220 V / 50 Hz Power consumption: 1.83 kW Machine dimensions: approx. 2,400 × 800 × 1,680 mm Machine weight: approx. 180 kg Operating temperature: –10 °C to +50 °C Features / Functions Automatic carton sealing Sealing of top and bottom Cedjzwch Njpfx Afgshc Integrated labeling system Real-time label printing Support for barcodes, date, logos, and other information Touchscreen operation Adjustable parameters Status and error display Roller conveyor technology Suitable for different carton sizes Suitable for integration into automated packaging processes Typical applications Mail-order business, e-commerce, fulfillment centers, warehouses and logistics, production facilities, packaging companies, and industrial end-of-line packaging. The machine is particularly suitable for companies that want to automate carton sealing and labeling in a single process. Condition: New Scope of supply and delivery time: upon request. If you are interested or have technical questions, please send us a message. We will also be happy to assist you with the planning of other packaging machines and automation solutions. Note: Technical specifications are based on the manufacturer's documents. Images may show optional equipment. Subject to technical changes and errors.

Condition: used, mileage: 296,516 km, power: 120 kW (163.15 HP), first registration: 03/2016, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front below the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), 1-pole battery disconnect switch, turn signals in the front on the side, roof control unit with reading light for driver/passenger side, entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps in the front, seats in the cab: passenger seat comfort, seats in the cab: driver seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separation relay with additional battery, rear wall paneling, thermal insulation for the driver's cab, heat protection glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver's side, display for washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assist, braking system with ABS+ASR, roof lining in the cab, lockable glove compartment, body/superstructure: standard flatbed, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 L - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to emission standard Euro 5, safety belt system with warning system (driver's side), seat cover/upholstery: fabric Lima, maintenance interval display Assyst, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle * 1st owner * Air-suspended rear axle * Ambulance and rescue vehicle with box body * Superstructure by Fahrtec Systeme * Adjustable floating table * Stretcher frame * Central locking for the patient compartment * KONVEKTA air conditioning system * 1 attendant seat Chsdpfxjzn Elrj Afgsc * Refrigerator compartment * Warming cabinet * Sink * Medical cabinets * Oxygen and suction system prepared * 12 + 230 Volt sockets * Skylight * Exterior storage compartments * Rear wing doors with step * Side door with sliding window and step * All-around work lights * Partition with sliding window * Ambient lighting on the right, left and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning in the front and rear * Automatic transmission * Telma retarder * Electric windows * Electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti with DOT 2025 and approximately 8.0 mm of tread depth all around. Engine, automatic transmission and rear axle are dry. The engine runs smoothly and the automatic transmission shifts cleanly. The starter battery is new. +++ Subject to errors, changes and prior sale.

Condition: used, mileage: 252,000 km, first registration: 07/2023, fuel type: diesel, fuel: diesel, Year of construction: 2023, Mercedes-Benz Sprinter Pro 317 CDI Chassis *Former refrigerated vehicle!* • Engine: OM 654 DE 20 LA • Power: 125 kW / 170 hp • Emission standard: EURO 6e • HVO compatible • 9-speed automatic transmission (9G-Tronic) • ABS / ASR / ESP • Alternator 14V / 250 A • AGM battery 12V 70 Ah • Single-pole main battery switch • Jump-start contact • Terminal strip for electrical connection • Outside temperature display • Engine oil level display at cold start • 93-liter tank • Fuel filter with water separator • SCR emission control, generation 4 • Crosswind Assist • Traffic Sign Assist • Active Lane Keeping Assist • ATTENTION ASSIST Csdoyut H Sjpfx Afgshc • Communication module (LTE) for digital services • Mercedes-Benz emergency call system • Breakdown management • Thermal insulation glazing with band filter on windscreen • Rain sensor • WET WIPER SYSTEM • Electrically adjustable, heated, folding exterior mirrors • Semi-automatic climate control TEMPMATIC • Multifunction steering wheel • Height- and tilt-adjustable steering wheel • Vibration damper • Driver and passenger airbags • Driver’s seat: suspended comfort seat with lumbar support and armrest • Heated driver’s seat • Low driver’s seat box • Front passenger double seat • Seat belt warning for driver & passenger • Entry grab handles for driver & passenger • Rear bulkhead trim • DAB radio • Navigation system • USB socket 5V • Instrument panel charging package • Smartphone integration package • MBUX multimedia system • 1-DIN slot front, under headliner • Front cup holders • Combined instrument panel with color display • Speedometer in km/h • Central locking • Smoker package • Acoustic package • Electrical system for body builder conversion • LED High-Performance headlights • Fog lights with cornering function • Driving light assistant • Side marker lights • Outline lights • Rear lights, partially LED technology • Adaptive brake light • Extended rear light wiring harness • Trailer socket pre-installation • Pre-installation for 3rd brake light electrics • Pre-installation: programmable special module electrics • Pre-installation: switch panel • Pre-installation: Remote Service Plus • Pre-installation: Live Traffic Information • Pre-installation: bodybuilder’s blind spot assist • Pre-installation: reverse assist electrics • Front mud flaps • Longitudinal beam reinforcement • Rear towing eye • Minimum unladen weight: 2,381 kg • Additional base construction measures • Additional base construction measures 2 • Gross weight: 3,500 kg • Axle ratio: i=3.923 • Reinforced front axle load • HOLD function • Hill start assist • Stability control stage II • Wireless tire pressure monitoring, front and rear axles • Tire size: 235/65 R16C • Tire tread depth: 5/5 / 7/9 mm • Rims: steel 6.5 x 16 • Wheelbase: 3,660 mm • Frame length: 3,350 mm - 1st owner! - German vehicle! Errors and prior sale excepted!

Condition: excellent (used), Year of construction: 2014, 546 USED Wachtel Columbus shelf oven with a baking area of ​​15 m². BAKING CHAMBER DIMENSIONS (in cm): - W: 180 - L: 160 TECHNICAL DATA: - year of production: 2014 - thermal power: 121/90 kW - number of chambers: 5 - baking area: 15 m² EQUIPMENT: - gas burner - 3 manual loaders The price is a net price. Cedjz At Haepfx Afgshc Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, mileage: 366,800 km, power: 375 kW (509.86 HP), first registration: 07/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Tipper hydraulics: dual-circuit system with tipping lever in the cab. Hydraulic tank 200 liters. * Moving floor hydraulics. ----Dual-circuit hydraulic system with 2 connection points in front of and behind the fifth wheel coupling. ----* 12-speed automatic transmission * Electronic braking system (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary water retarder * Wheelbase 3,700 mm * Comfort driver’s air suspension seat * Lower comfort bed * Lower mattress, PremiumComfort * Shaving mirror * Electric sunblind, one-piece * LED ambient lighting for driving and living * Electric parking air conditioning * Automatic climate control * Residual heat utilization * Additional hot water heater, cab * Additional cab thermal insulation * Electric sliding/tilting glass roof * Interface, Fleet Management System (FMS) * Trailer socket 24 V, 15-pin * NATO socket * Illuminated Mercedes star * BigSpace cab, 2.50 m wide, flat floor * Storage compartments above bunk * Aerodynamic deflectors with end-flap guides * Exterior sun visor, transparent * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Heated driver’s seat * Rear axle air suspension * Navigation system * Fuel tank 570 liters * AdBlue tank 60 liters * Hydraulic tank 200 liters * Automatic main/dipped beam and cornering light * OM 471 engine, R6, 12.8 L, 375 kW (510 HP), 2500 Nm Cjdpfey Scqiox Afgohc * Euro 6, D engine configuration * High Performance Engine Brake * NA MB 131-2c, pump * Safety Pack * Chrome Package, interior * Climate Package * Comfort Package * Tipping control in the cab * Electronic Stability Program (ESP) * Lane Keeping Assist * Adaptive Cruise Control * Attention Assist * Traffic Sign Assist * Turning Assist (Blind Spot Assist) * Active Brake Assist 5 * Driver airbag * Cruise control * Actros model generation 5 * Refrigerator drawer under bed * EBS * Single PTO * Without spare wheel ----Sale to business customers only! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We are happy to make you a leasing or financing offer.

Condition: used, Year of construction: 1997, functionality: fully functional, stack height: 1,000 mm, working width: 1,020 mm, For sale is a very well-maintained FK 102 S model from 1997, featuring pneumatic side guides, a dust removal calender, electronic overlap control, a film cutting device, an Achilles separator, and a Gemser stacker. The machine is suitable for both wet and thermal lamination. Minimum format: 250 x 360 mm Maximum format: 1020 x 1240 mm Material weight: 100-450 g/m² Chedez Ai Dnopfx Afgsc

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 47 kW (63.90 HP), type of input current: three-phase, overall weight: 240 kg, noise level: 34 dB, input frequency: 50 Hz, Equipment: freezer, Ciat Dynaciat LGN 120 CIAT DYNACIAT LGN120 liquid chiller without condenser. manufacturer: CIAT DYNACIAT year of manufacture: 2005 Electronic control cooling capacity: 34/47kw Compressor 1pc - Hermetic SCROLL type SZ125S4CC refrigerant R407C Evaporator - Brazed plate heat exchanger heat exchanger capacity: 4.2 liters - Plate patterns optimized for high efficiency - 19 mm armaflex thermal insulation connection: 1.5" machine dimensions: height: 121cm full core: 160cm width:79cm length:88cm weight: 190kg - Electronic expansion valves - Service valves on the liquid line ■ Control and safety devices - Water temperature control sensors - Evaporator frost protection sensor - Factory-installed evaporator water flow regulator - 24V control circuit Cjdpfx Afjvzrxcegohc - Connect the Touch microprocessor-controlled electronic control