Used Cross Table Wolfcraft for sale (20,202)

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2025, volume flow: 410 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of Lodpfxjzdnxge Anujac 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, functionality: fully functional, total length: 1,470 mm, table width: 1,140 mm, input voltage: 400 V, working height: 970 mm, Scissor lift table for raising pallets to a comfortable working height. Lasdpfx Ajzf Ehzenusc

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Laedpfx Aoyr Dfaonujc Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: used, table diameter 315 mm workpiece weight 50 kg Lajdpet Dqu Dsfx Anusc centre height mm weight of the machine ca. 60 Kg dimensions of the machine ca. 0,4 x 0,4 x 0,2 m vertical rotary table, Height from assembly space to centre of disk = 500 mm

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m Laodpfx Astv H Uconuoc • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: used, Year of construction: 1988, table length 2000 mm table width 1800 mm table load 12,5 t table adjustment - longitudinal 1.250 mm table rotating 360 Grad Ledpfjtv H Txex Anueac table positioning 4 x 90 ° feeds - longitudinal 0,63 - 2.000 mm/min total power requirement 4 kW weight of the machine ca. 7,6 t

Condition: used, spindle diameter 90 mm Lodpjtv Ibdsfx Anusac x-travel 1000 mm y-travel 1200 mm z-travel 1200 mm feed movement 710 mm spindle taper ISO 40 turning speed range 8 - 1600 U/min table-size 1120 x 1000 mm table rotating 360 ° table load 2,5 t total power requirement 11 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 3,3 x 3 m separate switchboard, rapid traverse some tool holders, without facing plate, without steady rest,

Condition: like new (used), Year of construction: 2014, functionality: fully functional, SCM TF130 CLASS Spindle Moulder Used machine Year: 2014 Features: - Manual adjustment for the lifting of the spindle arbor, equipped with a digital display for accurate working height positioning - Programmable fence with wooden infeed/outfeed tables, dust extraction hood, and wooden table extension; maximum tool diameter Ø250 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 7,000 / 10,000 rpm - Digital display indicating selected spindle speed - Electrical pre-equipment for power feed unit - Spindle rotation reversal with electric interlock for start-up safety - Automatic star-delta motor starting - Motor power [S6 -40%]: 7kW / 9.5 HP / 50Hz - Safety guard for spindle operations (max tool Ø160 mm) - Emergency stop button - Safety micro-switches for spindle lock - Safety micro-switch on the motor access door - Main isolator switch with lock - Thermal-magnetic overload protection - Transformer for auxiliary circuit: 110V - Automatic motor brake on the main motor - CE conformity certificate Technical Data: - Working table dimensions: 1,200 x 730 mm - Useful spindle length CE Ø30/35 (40/50): 140 (180) mm - Spindle arbor projection from the table: 52 mm - Spindle arbor projection from the table with interchangeable arbor: 92 mm - Maximum retractable tool diameter below table, with ring table: 320 x 85 mm (with sector table Fast=300 x 85 mm) - Fence travel with mechanical programming: 125 mm (positioning from spindle axis: -125 to +125 mm with MK5 arbor) - External diameter of dust extraction port on spindle hood: 120 mm - External diameter of extraction ports on the base (for forced air-cooling of the electrospindle): 120 mm - Extraction system air speed: 20 m/s - Extraction system air consumption: 1,700 m³/h Options on machine: - Bar fence - “TL” version for tenoning and profiling (CE compliant) - includes manually operated tenoning carriage Lasdpfx Anjy R Tw Doujc - eccentric clamp - adjustable telescopic fence with 4 reference stops for programming workpiece length - break-out preventer on the fence with reference stop - infeed table extension with adjustable front support bar for large workpieces - tenoning hood with dust extraction: - quick tool change, max tool diameter 300 mm - with 30 to 35 mm arbor, max tool diameter 300 mm - with 40 to 50 mm arbor, max tool diameter 350 mm - emergency stop button - operator protection bar - micro-switches for monitoring and limiting to 3,000/4,500 rpm during tenoning operations. Note: - Available only for machines compliant with CE standards. - Available only with mechanically adjustable spindle fence or, alternatively, the "Flex" fence. - Minimum required main motor power: 7 kW.

Year of construction: 2001, condition: used, machine/vehicle number: 29, Manufacturer FORST Machinenumber: 29 Year of Manufacturing: 2001 Force max.: 63 kN Stroke max.: 1000 mm Ledpfxednk Uko Anuoac Weight: 7 tons (machine + control cabinet + coolant system) Broaching Stations: 1 Cycle Time: 28 sec. Cutting Speed max.: 8 m/sec back hub: 16 m/sec Shank Ø: 32 mm Endfitting Ø: 25 mm

Condition: new, Year of construction: 2026, functionality: fully functional, The basic components of the grinding machine include: base, slides, column with grinding wheel spindle, rotary table, and control cabinet. The table is driven by a mechanical transmission and a gearbox-frequency converter unit, and performs a rotary motion. The rotary speed of the table is adjusted using a potentiometer on the machine's control panel. In manual operation, the machine will have the ability to perform pulsed rotary movement of the table, controlled from the operator's panel. The transverse feed is performed by the column and spindle moving along the rolling guides of the base. This movement is realized using a ball screw with a belt drive and an asynchronous motor controlled by a frequency inverter. The vertical feed is performed by the spindle moving along the sliding guides of the column. A ball screw is used to drive the vertical feed. The continuous feed of the column is stepless. These values are set from the control panel. The machine will be equipped with a direct digital readout on the vertical axis with a resolution of 0.001 mm. An electronic handwheel for vertical axis feed during manual operation and an operator panel (programmable display) will be placed on the operator's panel. The grinding machine will have smooth adjustment of the grinding wheel spindle speed and the table speed. The machine will be able to operate in an automatic cycle with the possibility of programming the number of sparking passes and other parameters necessary for grinding in an automatic cycle. Lasdpfxozfyvye Anusc Safe operation of the grinding machine is ensured by a semi-enclosed cabin and all electrical and mechanical safeguards in accordance with CE standards. 1 Table working surface Ø800 mm 2 Maximum distance between the table surface and the spindle axis during manual spindle feed 350 mm 3 Minimum distance between the table surface and the spindle axis 125 mm 4 Maximum weight of the workpiece 2500 N 5 Range of steplessly adjustable table speed 2-100 m/min 6 Maximum horizontal column feed 450 mm 7 Range of steplessly adjustable column feed speed 0.2 – 3 m/min 8 Grinding wheel feed per: 1 encoder unit 0.001 mm 9 Minimum automatic grinding wheel feed 0.001 mm 10 Maximum automatic grinding wheel feed 0.040 mm 11 Speed of accelerated grinding wheel feed 1 m/min 12 Grinding wheel spindle speed 1000 – 2500 RPM 13 Diameter of new grinding wheel 400 mm 14 Diameter of worn grinding wheel 250 mm 15 Bore for mounting the grinding wheel 127 mm 16 Width of grinding wheel nominal / maximum 50 mm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Laedpfouqw E Nsx Anusc Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Lsdpfxju Su Apo Anuoac Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1978, spindle diameter 105 mm x-travel 1250 mm Lsdpfxjt Hwtxj Anusac y-travel 1000 mm z-travel 600 mm table length 1100 mm table width 900 mm tool adaptor 50 ISO / MK total power requirement kW weight of the machine ca. t CNC Table Borer, Reconditioned 2002, BOSCH CC 300

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Ljdot Hwq Rjpfx Anusac Payment : Net, after conclusion of contract Thank you for your interest.

Condition: excellent (used), Year of construction: 2010, CATALOGUE NUMBER 8020 TECHNICAL DATA - Max. diameter of the main saw blade with scoring blade: 400mm - Main blade adjustable up/down and at an angle - Spindle diameter: 30mm - Spindle locking - With a rip fence carriage - With a crosscut fence carriage - Length of rip fence carriage: 3200mm Lsdpfx Aszdd A Njnusac - Cutting width with fence: 1240mm - With a crosscut fence carriage - With a scoring blade - Max. diameter of scoring blade: 120mm - Scoring blade motor: 0.75kW - Main motor: 5.5kW - 2 speed settings - Table dimensions: 1060x650mm - Table extension: 1660x1550mm - Large blade guard - Diameter of dust extraction port: 100mm - Dimensions (L/W/H): 3600x3220x1300mm - Weight: 700kg ADVANTAGES - Made in Austria - With a scoring blade - DTR documentation - Used machine, very good condition Net price: 9900 PLN Net price: 2357 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 2017, Table dimensions: 2700 x 900 mm HSK 63 F interface 2x spindles for HSK 63 F interface (30 + 40 mm) Spindle tilt: -45° to +45° Usable spindle length: 180 mm Right and left-hand rotation 4-roller feed with motorized height/width adjustment and pneumatic clamping 7.5 kW brake motor with electronic inverter CNC adjustment for: - spindle tilt - spindle height adjustment - complete fence - front part of the fence - table positioning in front of the spindle - electronically variable speed control 1,000 - 10,000 rpm - Aigner milling fence with aluminum jaws - Touchscreen with graphic function - Windows operating system - Camera for importing tool and profile images - Complete fence can be fully swiveled away - automatic star-delta start - central lubrication Weight approx. 1360 kg Location: Nattheim Laedpfx Ajyudidsnusc

Condition: used, functionality: fully functional, total width: 900 mm, total length: 2,400 mm, total height: 750 mm, overall weight: 600 kg, plate height: 200 mm, Optical table (Newport) Ledpfx Anozfxtqeusac - Dimensions 2400 x 900 x 200mm - inkl. threads for clamping - with damped steel frame - working level 750mm

Condition: not inspected (used), YOM 1998, Hidenhein 430 .12000/1000/1450mm. 36000 kg Ljdpszfw A Dsfx Anueac

Condition: excellent (used), Year of construction: 2000, Ref:11105 . 2000 Polar RA-4 Paper Jogger Comprising; Air table and left & right side flaps for smooth pile flow Tilting table with adjustable angle for light or heavy stock Tilt action to the left or right Automatic air removing roller – various functions Including air table blower unit. N.B. In-house, 6 bar compressed air line required. Specification: Useable surface, Max: 90 x 115 cm Pile height, Max: 16.5 cm Power requirements : 3pH, 380-415V, 1.5kW. Lsdpsy Uya Tefx Anuoac Space required (tilted): 124 x 155 cm.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, We are offering this very well-maintained FESTOOL table saw, model PRECISIO CS 70 EB, manufactured in 2016. It has been used very rarely, approximately 20 operating hours. Lsdpfx Aezfv S Dsnuoac Manufacturer: Festool Model: CS 70 EB Year of manufacture: 2016 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Muro 1002 Paper Jogger Description: Ljdpfx Ajzdat Donusac The jogger is designed for aligning collected sets of forms, brochures, and printing sheets. The motor speed is adjustable. The jogging cassette tilt angle is 45°. Technical specifications: Format: 43 x 43 cm Stack height: 10 cm External dimensions: 60 x 60 cm Power supply: 230 V Weight: 40 kg

Year of construction: 2026, condition: like new (used), functionality: fully functional, overall weight: 49 kg, total length: 600 mm, total width: 800 mm, total height: 990 mm, machine/vehicle number: 2026, Table Trolley TW 800 Stainless steel table trolley Worktop on top Shelf below Rugged construction Dimensions: 800 x 600 x 990 mm (W x D x H) Mobile with 2 braked castors Lodpjy Ac Ucefx Anusac As new condition

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, overall weight: 55 kg, total length: 700 mm, total width: 1,880 mm, total height: 850 mm, TOP work table AT 1880 with stainless steel top Work table for gastronomy/bakery Stainless steel worktop Lower storage shelf Reinforced welded construction Approx. dimensions: 1880 x 700 x 850 mm (W x D x H) Used unit, cleaned Option: Delivery service Ledpfsyhy E Sjx Anuoac New castors/wheels We have many more work tables in stock!

Condition: used, Angle table with 5 T-slots 12 mm T-slot width Length 680 mm Width 260 mm Height 265 mm Lodocu Im Dspfx Anueac

Condition: ready for operation (used), Year of construction: 2011, DELTA LC 500 - Rotary table grinding machine -CE marking -Magnetic table - rotary table, 500mm -Max. grinding diameter 500mm -Grinding height (distance table - grinding wheel) approx. 230mm -Grinding wheel dimensions (standard) 200x80x78mm -Speed - grinding spindle approx. 2850 rpm -Fine feed 0.01mm -Distance / column - grinding spindle axis approx. 320mm -Spindle motor 3 kW -Coolant system -Machine enclosure -Documentation Lodpfxszflxas Anujac Dimensions: L x W x H 1.3 x 0.8 x 1.8 meters / (00 kg Errors and omissions excepted.