Used Cross Blade for sale (9,543)

Condition: used, Weinig OptiCut C700 under-table cross-cut saw for the safe and precise cutting of solid timber, particularly hard and heavy timbers with large cross-sections. The machine features a pneumatically guided saw unit, two-hand control and a hold-down device, and is ideally suited for sawmills, timber construction and industrial solid timber processing. Technical data: - Saw blade diameter: 550 mm - Cutting width: 750 mm - Cutting depth: 175 mm Fpjdpfxszrywdo Ak Uol - Motor: 5.5 kW

Condition: ready for operation (used), Year of construction: 2012, operating hours: 926 h, functionality: fully functional, machine/vehicle number: 546324, saw blade diameter: 500 mm, cutting width (max.): 300 mm, overall weight: 1,500 kg, saw blade length: 7,209 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. saw blade length: 7,209 mm Max. saw width: 300 mm Max. saw blade diameter: 500 mm Fsdpfjzzbfbox Ak Ujpl Arbor saw blade diameter: 85 mm Infeed table length: 7,850 mm Outfeed table length: 2,400 mm MACHINE DETAILS Voltage: 400 V Current consumption: 22 A Fuse: 25 A Main motor power: 7.5 kW Connected power: 11 kW Dimensions & Weight Dimensions (L x W x H): 11,250 x 900 x 1,800 mm Weight: 1,500 kg Operating hours: 926 h EQUIPMENT CE marking

Condition: new, Year of construction: 2024, Under-table cross-cut saw UTK-600 also with a pneumatic vertical front protective shield Execution according to the new current PLC safety control ltd. Of the new machinery directive Technical specifications: - Motor power 7.5 kW S1 - Max. Saw blade diameter: 600 mm - Saw blade holder: 35 mm - Cutting time per stroke: 4 sec. - Speed ​​on the saw shaft: 2800 rpm - Air consumption per cycle: 20 L - Working table height: 900 mm - Extraction nozzle: 2x120 mm, 1x100 mm - Operating pressure: 7 - 8 bar - Net weight: approx. 520 kg - Necessary air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase Cutting capacity in mm: 30 x 800 50 x 765 140 x 600 180 x 340 200 x 200 Standard basic equipment: - Saw blade feed pneumatic drive - * NEW two-hand safety PLC control - Automatic engine brake - Set of operating keys - Emergency stop button - Speed ​​regulator for saw blade feed - Fixed vertical protection - Upper safety pressure device (pneumatic protective hood) Fpsdpef Sqy Djfx Ak Uel - suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: excellent (used), functionality: fully functional, maximum cutting width 250 mm feed table length 3 m outfeed table length 3 m year of manufacture 2003 motor power approx. 2.2 kW Fpedpfx Akszz N Nzo Uel power supply 400 V weight 600 kg

Condition: good (used), Year of construction: 1997, functionality: fully functional, For sale: 1 used horizontal band saw including infeed, outfeed, and loading magazine Manufacturer: Behringer Type: HBP430/854GA5000 Fpodpfx Aswhcv Rsk Usl Equipment: 2x cross-transport chain conveyors, driven roller conveyor, stop system Saw drive: Dietz 7.5 kW Flat cutting capacity: 90° 880 x 500 mm / 45° mm Round cutting capacity: 90° 500 mm / 45° mm Saw blade speed: continuously adjustable Saw blade: 7200 x 40 mm Coolant system: Cooling water Installation dimensions: 26500 mm / 6000 mm / H2100 mm Weight: 16000 kg

Condition: excellent (used), functionality: fully functional, power: 55 kW (74.78 HP), type of input current: three-phase, For sale: 4 high-performance drum-type grinders/refiners. Price is per unit. Two are blue; two are orange (model RM800.7). All machines are in good working order. Fsdpozz Sh Hofx Ak Uopl

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Fodpfxju R Sype Ak Uopl Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: used, Year of construction: 2011, functionality: fully functional, working width: 1,015 mm, cutting height (max.): 310 mm, cutting width (max.): 1,015 mm, FICEP KATANA K100 + K60 - TWO REFURBISHED STRUCTURAL-STEEL BAND SAWS | BUNDLE OFFER Two automatic Ficep mitre band saws of the Katana series: the K100 (year 2011, profiles up to approx. 1000 mm) and the smaller K60 (profiles up to approx. 600 mm). Both designed for economical cutting of solid material, profiles and tubes in steel and non-ferrous metals. AVAILABLE INDIVIDUALLY OR AS A PACKAGE. CONDITION & REFURBISHMENT Both machines have been overhauled and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies per machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machines reconditioned - no demonstration under power). FUNCTION & APPLICATION Automatic mitre band saws for profile processing in structural steelwork: beam, tube and flat material as well as solid material in steel, aluminium and non-ferrous metals. Motorised feed with infinitely variable cutting speed, hydraulic clamping systems, CNC-controlled mitre cuts and cutting programs. The K60 is additionally prepared for the DSTV data interface (import from CAD/CAM). Applications: steel fabrication shops, steel and semi-finished trading, industrial pre-fabrication. --- MACHINE 1: FICEP KATANA K100 (YEAR 2011) --- Horizontal CNC mitre band saw for large structural-steel cross-sections. Hydraulic blade tensioning, dual automatically pre-settable blade guidance, integrated cooling/lubrication. - Year: 2011 | Serial number: 33111 - Cutting width at 90 deg: 1015 mm | Cutting height at 90 deg: 310 mm - Min. profile size at 90 deg: 60 x 10 mm Fpsdswd Ugtepfx Ak Uol - Cutting width at +/-45 deg: 610 mm | Cutting height at +/-45 deg: 310 mm - Max. mitre angle: +/-60 deg - Saw blade: 7880 x 41 x 1.3 mm | Blade speed: 60-170 m/min - Blade motor: 9 kW | Control: Ficep CNC - Hydraulic blade tensioning, dual blade guidance (fixed/mobile side) - Synchronised cleaning brush, integrated cooling/lubrication system - Hold-downs and workpiece vices: hydraulic, independent --- MACHINE 2: FICEP KATANA K60 --- Horizontal CNC double-mitre band saw for medium cross-sections. Hydraulic horizontal and vertical clamping, minimum-quantity lubrication, Mitrol CNC with Pegaso software. - Year and serial number: on request (to be confirmed on the name plate) - Cutting range at 90 deg: 610 x 310 mm - Cutting range at 45 deg: 400 x 300 mm | at 60 deg: 250 x 250 mm - Mitre angle range: +45 / -60 deg | Min. profile height: 60 mm - Saw blade: 34 x 1.1 x 6350 mm - Blade motor: 7 kW | Control: Mitrol CNC, Pegaso software - Data interface: DSTV | Remote diagnostics via network - Hydraulic horizontal/vertical clamping, minimum-quantity lubrication (MQL) - Operating mode: standalone or as combined line with drill unit Machine weights and dimensions for both machines follow on request. LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further Ficep machines on request. CONTACT / INQUIRY Price on request - individually or as a bundle | Viewing by arrangement. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs Fpodpfx Aow U Eh Iek Ujl * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions ##### Machine is partially overhauled and with electrical acceptance report! ##### !! Various measuring optics (new or used) with measuring cross sled available !!

Condition: refurbished (used), Year of construction: 2010, Laska WW 130 2 Cross feed Mincer 2 speed machine Year 2010 All stainless steel Safety interlocked grill lid Fedpfx Ajzbt N Hek Uopl 130 mince head Up to 3 mince plates and 2 x 4 bladed knives Motor 17 Kw - 35 amp

Condition: ready for operation (used), Year of construction: 2000, number of axes: 4, total height: 2,550 mm, total width: 2,400 mm, overall weight: 13,000 kg, product length (max.): 12,000 mm, This 4-axis HUNDEGGER K2-A was manufactured in 2000. It features a workpiece cross-section capacity ranging from 20 x 50 mm to 300 x 450 mm, with a minimum workpiece length of 300 mm in automatic mode. The machine includes various components such as an under-table swivel cut-off saw and a universal milling unit. If you are looking to get high-quality CNC wood machining capabilities, consider the HUNDEGGER K2-A machine we have for sale. Contact us for further details. Fodpfezugw Aex Ak Ujpl - Machine Type: Fully Automatic Joinery Machine- Workpiece Cross-Section Min.: 20 x 50 mm- Workpiece Cross-Section Max.: 300 x 450 mm- Minimum Workpiece Length (Automatic Mode): 0.3 m (300 mm)- Operating Voltage: 400 / 230 V (3/N/PE)- Electrical Frequency: 50 Hz- Fusing Protection: 3 x 63 A- Peak Power Requirement: 15 kW- Operating Compressed Air Pressure: 8.5 bar (Max: 10 bar)- Compressed Air Flow Requirement: > 600 l/min- Hydraulic Operating Pressure: 100 bar- Noise Emission Level (LpA): 79 dB(A) ± 3 dB(A)- Transport Dimensions (L x W x H): 12.00 m x 2.40 m x 2.55 m- Included / Equipping Components:* Under-table Swivel Cut-Off Saw with HM saw blade (D=735 mm, s=6.0 mm)* Universal Milling Unit with cylindrical cutterhead (D=350 mm, B=120 mm)* Vertical Combo Support* Horizontal Combo Support* Rafter Nail Drilling Unit* Slotting / Mortising Unit* Infeed & Outflow Conveyors / Positioning Trolleys

Condition: ready for operation (used), Year of construction: 1996, Make: KGM Type: SK560 No.: 96-1600-1 Year: 1996 Cross-cut saw with a large cutting capacity; features hydraulic feed for the saw guard and discharge arms, and a pendulum-action saw blade; suitable for heavy, long workpieces such as glulam beams, etc. TECHNICAL DATA Infeed conveyor: 6 meters, 600 mm rollers Cross-cut saw with hydraulic power unit Fodezl Tuvopfx Ak Uopl Cutting capacity approx.: 200 x 600 mm (height x width) Outfeed conveyor: 8 meters, 600 mm rollers + additional 2-meter conveyor section Power: 400 V, 50 Hz, 3-phase

Condition: used, Holtec package cross-cut saw - hydraulic lowering of the saw blade - length measurement - hydraulic package ejection Fsdpfexzr Efsx Ak Uepl

Condition: used, Mechanisation Infeed loading system Consisting of: 1 x conveyor belt with stop and pusher 1 x roller conveyor 1 x cross transfer unit with servomotor Fsdpsr Eh Uhsfx Ak Uopl For example, ideal for: A) in front of a planer with multi-blade saw B) in front of a resaw band saw or other saw C) at the infeed in front of other machines Sold as is and without electrical control OPTION Electrical control available on request and at additional cost

Condition: excellent (used), Year of construction: 2001, I sell the format sliding table saw with scoring SCM SI 300N, year 2001. Sliding table length 3200mm. Max. cutting width on cross fence 1950 / 2850mm. Max. cutting width on parallel fence 1270mm. Motor 5,5 kW. Max. saw blade diameter fi.300x30mm Max. scoring saw blade diameter fi.120x20mm Main blade (scoring blade) 4000 (8000) rpm. Fodoiu Awbopfx Ak Uepl Condition very good. Avialable immediately. Please contact for more photos and details.

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked Fedpfxeymyp Rs Ak Uopl - Pneumatics checked - Immediately ready for operation

Condition: good (used), Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm Fjdpfx Aepcmthsk Ujpl -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Fpedpfow El Nhsx Ak Uol

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Fpedpfjvu Hd Tjx Ak Uol types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: used, Year of construction: 2019, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 400 mm, saw blade diameter: 370 mm, height adjustment type: electric, saw blade bore: 80 mm, actuation type: electric, rotational speed (max.): 3,800 rpm, total length: 2,500 mm, total width: 2,260 mm, total height: 2,000 mm, overall weight: 6,500 kg, table height: 700 mm, Equipment: CE marking, documentation/manual, The Multilama or multi-blade circular saw, model SQUALO 420, is a technologically advanced machine that is easy to use, precise, and extremely reliable. It is an essential tool for a modern sawmill, optimizing the production of sawn timber. Fpodpfxezzad No Ak Uel It is ideal for producing slats, squares, lumber, profiles, edged boards, prisms, boards, and pallet components.

Condition: good (used), Year of construction: 2004, functionality: fully functional, cutting height (max.): 200 mm, cutting width (max.): 250 mm, total height: 1,750 mm, total length: 2,500 mm, total width: 2,300 mm, overall weight: 2,500 kg, For sale is a fully functional KASTO twin AE3 – a robust horizontal bandsaw machine for the reliable and economical cutting of solid and profile materials in general mechanical engineering, as well as in series and single-piece production. With a maximum material width of approximately 250 mm and a clamping height of approximately 200 mm, the machine is suitable for clean cutting of a wide variety of materials and cross-sections. The well-thought-out design, with a feed length of approximately 2200 mm and a material discharge length of approximately 1600 mm, ensures a comfortable and efficient material flow. The machine is complemented by two discharge roller conveyors, each with a length of approximately 1000 mm, resulting in a total material discharge length of approximately 4000 mm – ideal for the safe handling of even longer workpieces. The compact design, with dimensions of 2500 x 2300 x 1750 mm and a weight of approximately 2500 kg, offers high stability and smooth operation, which has a positive effect on cutting quality and service life. The scope of delivery also includes approximately 8 spare saw blades, which enable immediate and uninterrupted use of the machine. Overall, this is a reliable and versatile bandsaw machine that combines precision, performance, and efficiency in industrial production. --- Fpodpfx Aozk Hd Usk Uol Optional accessories A conveyor belt in lengths of 310 cm and 420 cm can be purchased separately to optimize material flow and provide comfortable handling of the cut material. --- You are welcome to inspect the machine in our workshop while it is running. If you are interested, we will gladly send you demonstration videos of the machine. Upon request, we offer delivery and commissioning of the machine as part of a comprehensive, hassle-free package. You are in the best hands with us – professional, reliable, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG

Condition: used, machine/vehicle number: 006006, Max. panel width: 2300 mm Max. panel length: 4300 mm Main saw blade projection: 135 mm No of Rip saw Grippers: 7 No of Cross Cut Grippers: 20 Second flexible pusher: yes Fjdpfx Aju Rv Uqek Uopl Panel Rotation Station: yes

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, For inquiries: Zoltán Utasi +36 30 205 7380 Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood Fpjdpfx Akeq H Sqdo Usl CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Fodezxxmkopfx Ak Uepl Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: new, Year of construction: 2024, machine/vehicle number: Werksüberarbeitungsnummer: WÜAF25T211178, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,410 mm, cutting length (max.): 3,200 mm, main saw diameter: 315 mm, Equipment: scorer, F25 Basic equipment - Manual height and tilt adjustment of saw blade 0 – 46°, with digital display - Drive power 4 kW (5.5 HP), single speed, 4,200 rpm - Double roller carriage, carriage length 3,200 mm - Mitre fence, cross cuts up to 3,450 mm - Max. saw blade diameter 315 mm, max. saw blade projection 104 mm - Cutting height 100 mm, 70 mm at 45° - Machine height 880 mm Fsdowwt Ayjpfx Ak Uspl Equipment package type 2 - 5.5 kW (7.5 HP), 2 speeds - Parallel fence, 1,410 mm - Large extraction hood (PSV) - Basic scorer with LED lighting