Used Moving Blades for sale (7,397)

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Dksdpfxsxliguj Aduou Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Dsdoxlfwpspfx Adueku Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2024, functionality: fully functional, This powerful machine to meet the requirements of larger woodworking companies, ensuring exceptional sharpening results. Equipped with an electronic tooth counter and an autonomous cooling system. The ZM150 offers precise sharpening while maintainingoptimal operating conditions. With two electric motors, including a 150mm CBNdisk for sharpening and a motor reduction group for precise blade movement,this sharpener delivers outstanding performance. Dkedexiv Ugspfx Adueu Power supply voltage - 380-400V Frequency - 50Hz Power - 0.20kVa Capacity - 65 teeth per min Blade width - 20 to 100 mm Tooth pitch - 6 -25mm Sharpening disc - Profiled 150mm CBN disc Weight - 115kg

Condition: used, Circular saw blade or grooving saw in very good used or like new condition. D: 250 mm keyway: 20 mm diameter: 250 mm drilling: 70 mm width: 6,0 mm Dsdpfjwrrdrex Adueku knife: 20 + 2 d: 70 mm B: 6,0 mm Z: 20+2

Condition: good (used), Approx. 30 segment circular saw blades up to approx. 1000 mm, bore 100 mm, primarily for LKH 310 and for PMC 12. Djdpfx Adoxlg Nmousku

Condition: excellent (used), Deburring machine for band saw blades IDEAL model SM60 to remove the residual welding bead. Dsdpfxexk Tb Te Adueku

Condition: used, axle configuration: 3 axles, first registration: 03/2019, suspension: air, color: grey, tire size: 385/65, Year of construction: 2019, Axle make: SAF CD Suspension: Air suspension Rear axle 1: Tyre size: 385/65; Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60%; Brakes: disc brakes Rear axle 2: Tyre size: 385/65; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50%; Brakes: no brakes Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 40%; Tyre tread right: 40%; Brakes: disc brakes Unladen weight: 7,300 kg Dodpfxeutvwpj Aduoku For further information, please contact Maarten Bruisten or Bob Beukers.

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Djdpfxeh Anyfj Aduoku

Condition: used, Double drilling mitre saw, with adjustable vertical blades, 2 lower drilling heads, 2 upper drilling heads Dsdpfx Ajv Tnihodusku

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine Dksdpfjv Sfkaox Aduou tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: good (used), Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades. Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces Dksdpfx Aexf Dpkeduou -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg

Condition: new, Year of construction: 2025, functionality: fully functional, The ASM 6-30 is a high-speed tooth setter for band saw blades, making it perfect for companies that use different volumes of bandsaw / sawmill blades per day. The machine is very user-friendly and easy to set up, making it the ideal solution for a wide variety of customers with different experiences in the industry. Voltage - 220V Frequency - 50Hz Power - 220V Dkedpfx Adoxivgcsueu Secondary voltage - 24V Blade width - 15mm-60mm Tooth pitch - 6-30mm Accuracy - +- 0.04mm Blade thickness - 1.2mm Possible types of tooth set - left, right,straight/right,left,straight The machine is very user-friendly and easy toset up, making it the ideal solution for a wide variety of customers withdifferent experiences in the industry. Achieving precise tooth setting isessential for straight cutting and extended blade life, and our advancedclamping system delivers an impressive accuracy of 0.04mm. Capable of setting80-120 teeth per minute, the ASM 6-30 enhances your company's efficiency andensures a smooth workflow.

Condition: used, axle configuration: 3 axles, first registration: 04/2019, suspension: air, color: grey, tire size: 385/65R22.5, Year of construction: 2019, Tyre size: 385/65R22.5 Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Dkjdpfoxl Sqvjx Adusu Unladen weight: 7,300 kg For further information, please contact Mark van der Steen, Maarten Bruisten or Bob Beukers.

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Dksdou R Rtbopfx Adusu Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2016, condition: used, For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing Dkjdpjxfrubefx Adueu More information and pictures can be sent on request.

Condition: like new (used), functionality: fully functional, Blum bottom slotting milling machine like new for Legrabox drawers, 1 new milling cutter Dkjdpoxg Nznjfx Adusu

Condition: excellent (used), rotating bezel (28448) Dkjdpfxeq Habve Adueu SPH 225 mm diameter 115 mm Dimensions, see photos Weight 11 kg

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, The innovative flash butt welding machine for bandsaw and bimetal blades is developed entirely by our engineering department. It guarantees perfect welds and precise repeatability of the process. User friendly touch screen display from Schneider Electric that allows you to operate the machine effortlessly. The welding process is fully automatic, with the capability to adjust the electric current in 6 stages. The machine also allows for stepless regulation of electric current during annealing and pyrometric control throughout the welding process. The FBM10 is extremely easy to set up and cost-effective to maintain. Power supply voltage 400V Rated transformer capacity at 50% duty cycle 5kVA Frequency of electrical current 50HZ Clamping of the band saw blade Manual or Hydraulic clamping /Optional FBM 10.02/ Annealing Manual or Automatic, with pyrometric control /Optional/ Menu language Bg / En / Possibility for welding: - band saw blades for wood mm 6÷60 - Bi-metal band saw blades mm 6÷54 - stainless steel band saw blades mm 6÷40 Dsdpfsxhf Dzjx Adujku - band saw blades without teeth mm 6÷50 Weight: 197kg Dimensions: (length х width х height) mm 910 х 640 х 530

Condition: used, axle configuration: 3 axles, wheelbase: 9,010 mm, first registration: 01/2012, suspension: air, color: grey, tire size: 385/65R22.5, Year of construction: 2012, Axle configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Axle brand: BPW ECO Plus; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Axle brand: BPW ECO Plus; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 3: Lift axle; Max. axle load: 9,000 kg; Axle brand: BPW ECO Plus; Tyre tread left: 60%; Tyre tread right: 60% Dimensions Measurements (L x W x H): 1,404 x 255 x 400 cm Weights Unladen weight: 8,050 kg Payload: 33,950 kg Gross vehicle weight (GVW): 42,000 kg Djdpfx Asvtml Ijdujku Identification Registration: OS-33-GN Further information Please contact Maarten Bruisten or Bob Beukers for further details.

Condition: used, Year of construction: 2016, For the unloading, dosing and pneumatic transportation of different bulk materials like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers Dedpsxfrrmjfx Adujku - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

Condition: used, traveling Luenette Dodpscrcybefx Aduoku Height without foot 300 mm diameter 110 mm Foot width 50 mm

Condition: used, axle configuration: 3 axles, wheelbase: 9,110 mm, first registration: 02/2010, suspension: air, color: grey, tire size: 385/65R22.5, Year of construction: 2010, Axle configuration Tyre size: 385/65R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 60% Dimensions Dimensions (L x W): 1,401 x 255 cm Weights Unladen weight: 7,900 kg Payload: 34,100 kg Gross vehicle weight: 42,000 kg Identification Registration number: OK-07-ZD Further information Please contact Maarten Bruisten or Bob Beukers for more information. Dkedpowhfbvjfx Aduju

Condition: used, axle configuration: 3 axles, first registration: 01/2020, suspension: air, tire size: 385/55R22.5, Year of construction: 2020, Tyre size: 385/55R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Dodpfxjw Rnu Ae Adujku Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 80%; Tyre tread right: 80% Unladen weight: 8,010 kg Please contact Mark van der Steen or Bob Beukers for further information.

Condition: used, axle configuration: 3 axles, wheelbase: 9,100 mm, first registration: 04/2019, Year of construction: 2019, Axle configuration Rear axle 1: Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Rear axle 3: Max. axle load: 9,000 kg Dkjdpfx Aev Ryb Dodusu Dimensions Dimensions (L x W): 1,404 x 255 cm Weights Unladen weight: 7,300 kg Payload: 34,700 kg Gross vehicle weight (GVW): 42,000 kg Maintenance APK (Technical inspection): New TÜV upon delivery Identification Registration number: OV-38-SG Further information Please contact Maarten Bruisten or Bob Beukers for more information.

Condition: used, axle configuration: 3 axles, first registration: 01/2018, suspension: air, color: white, tire size: 445/45R19,5, Year of construction: 2017, Without moving bulkhead = Further information = Tyre size: 445/45R19.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 60%; Tyre tread right: 60% Rear axle 3: Max. axle load: 9,000 kg; Tyre tread left: 70%; Tyre tread right: 70% Unladen weight: 7,260 kg For further information, please contact Bob Beukers. Dkjdpfx Aoxg In Tsduou