Used Felins Loop Plus for sale (5,739)

Condition: used, functionality: fully functional, Year of construction: 1995, operating hours: 10,567 h, We are selling a mobile excavator O&K MH PLUS, manufactured in 1995, with various accessories. The operating hour meter reads 10,567. The tires were replaced approximately 4 years ago and show very little wear. Various hydraulic hoses have been replaced. See photos. The excavator is used very rarely and is always stored in a covered hall. Deep digging bucket: approx. 30 cm Hedpfxjz Hb Nns Apdow Deep digging bucket: approx. 80 cm Ditching bucket: approx. 200 cm The excavator must be picked up on site.

Year of construction: 2012, condition: good (used), cutting height (max.): 350 mm, neva orbit plus Hedpfsz R Uvxjx Apdew 350 mm, with numerous frame saws and grinding machines.

Condition: good (used), Polar Mohr 115 XT Plus Paper Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Hsdpfx Ape Af E Huodsw Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: good (used), Polar Mohr 115 X Plus Paper Cutting Guillotine This machine is in very good condition, ready for production, and has been serviced. Low mileage. Year of manufacture: 2011. This is the most valued guillotine brand, a flagship product. Technical specifications: Cutting width: 1150mm Stack height: 165mm Programmer with 18.5″ color touchscreen display Air table Hjdo Af E H Uopfx Apdsw Photocells Chrome table surface Ball screw drive for the rear comb Optical cutting line Enlarged side tables Knife change via the control panel Additional rear table guards Weight: 3200kg 380V power supply Includes documentation, a tool kit, a tapping block, a spare knife, and one knife in the machine.

Condition: excellent (used), Year of construction: 2024, 259 USED Arabic Bread Line, Oven Line: TECHNICAL DATA: - capacity: 3500-9000 pieces/h, - diameter: 15-38 cm, - number of rows: max. 3, - working width: 100 cm. - year of manufacture: 2024. EQUIPMENT: - divider, - pre-proofer, - rolling, - final proofer, - tunnel oven + 2 burners, - cooling conveyor: 80 m, Hodpfjzix Amjx Apdsw - stacker (folding and counting devices). The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Hodpfx Aowi Sulspdjw Type: FXP57S WF Constr. year: 2016 diameter range: 8,5-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Hjdoxv Ayvepfx Apdew Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: reconditioned (used), Year of construction: 1980, functionality: fully functional, For sale: a drilling and milling machine from Alzmetall. Type: Plus 3 DG. Hsdpfxszk U Dps Apdjw Inspection and test run possible at any time. Forklift available for loading.

Condition: like new (used), Year of construction: 2019, operating hours: 10 h, functionality: fully functional, # Complete Screen Printing Equipment Set – 4 Printing Machines, 4 UV Dryers & Screen Preparation Equipment For sale: Complete professional screen printing equipment set manufactured by Grafica Flextronica (India). A complete screen printing setup suitable for industrial printing applications. The equipment is ideal for businesses looking to start or expand their screen printing operations. ### Equipment Included: - 4 Screen Printing Machines – Grafica Flextronica, Nano-Print series. Industrial screen printing machines with adjustable printing settings and foot pedal operation. Hedo Ag S A Ajpfx Apdew - 4 UV Curing Tunnels – Nano-UV conveyor dryers designed for curing UV screen printing inks. - 1 Screen Preparation Cabinet – Includes a drying system and screen stretching/tensioning equipment for screen preparation. ### Technical Information: Manufacturer: Grafica Flextronica, India Models visible in the photos: - GF-2228 NSM – 220 V, 3.5 kW - GF-2228 NPP – 220 V, 1.2 kW - GF-18 UV – 440 V, 4.5 kW ### Features: - Professional industrial-grade equipment - Suitable for various screen printing applications - UV conveyor drying and curing systems - Screen preparation equipment included - Robust construction - Complete setup for screen printing production Condition: Used equipment. Please refer to the photos for details. Location: Lithuania The equipment can be inspected by prior arrangement. For more information, additional photos, technical details or pricing, please contact us. Serious inquiries are welcome.

Condition: like new (used), Year of construction: 2012, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 01645, type of input current: three-phase, filling weight (max.): 50,000 g, filling weight (min.): 5,000 g, input voltage: 380 V, input frequency: 50 Hz, PAYPER PB-12/CG semi-automatic bagging machine for open-mouth bags, equipped with a digital electronic weighing controller EWC PLUS (EWC+). Year of manufacture: 2012. Serial number: 01645. Operating hours: 100 h. Condition: like new and fully functional. Inspection while running is possible. Gross weight weighing system: the product is weighed directly in the bag during filling. CG dispensing by gravity using a pneumatic gate, with rapid feed and fine dispensing. The operator places the bag, and the system performs the dispensing and weight control. Suitable for free-flowing products such as cereals, seeds, plastic granules, and granular fertilizers. Equipment included: EWC PLUS controller, frame, conveyor belts, and bag sewing machine. Electrical power supply: 380 V three-phase, 50 Hz. Compressed air consumption: 8 liters per cycle. Hedpfx Ape Agv Rmodsw

Condition: excellent (used), For sale: Dräger Oxylog 2000 Plus transport ventilator – a professional mechanical ventilation device used in ambulances, medical transport, emergency rooms (ER), intensive care units (ICU), and by rescue services. The device powers on and operates correctly; the display is clear, with visible menus and parameters. Good visual condition with normal signs of use appropriate for its age (see photos). The equipment is sourced from the German market. Data and Equipment: • Model: Oxylog 2000 Plus • Manufacturer: Dräger • Year of manufacture: 2015 • Version: Transport • Module: LDS RD 228 • Gas supply (O₂ / Air) • Includes transport bags • Includes hoses and mounting bracket • CE marking, Made in Germany Features: • Adult and pediatric ventilation • Ventilation modes for emergency care • Adjustable parameters: Vt, frequency, FiO₂, PEEP, etc. Hsdpfoz Slk Aox Apdjw • Clear display with parameter overview • Safety alarms Technical condition: • Used device • Fully functional – turns on and responds to settings • No current calibration certificate (certification to be arranged by buyer if required) Legal notice: Medical equipment – intended for use by qualified personnel only. Perfect for private ambulances, medical transport companies, training purposes, military, offshore operations, or as backup equipment.

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 777, functionality: fully functional, input frequency: 50 Hz, overall weight: 3,500 kg, Machine used for less than one year, in brand new condition. Hjdpe Agww Defx Apdew

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 030 515 428, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Travel range, X-axis: 600 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Main spindle speed: 50–12,000 rpm Spindle mount: BT 40, JIS B 6339 Big+ Tool magazine capacity: 120 tool positions Preparation for tool magazine capacity: 240 tool positions Pallet changer: 2 pallets Pallet storage: 6 pallets Table size: 500 mm x 500 mm MACHINE DETAILS Operating hours: approx. 73,000 h CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Internal cooling: 70 bar Coolant pressure: switchable in 3 stages Coolant pump output: 5.5 kW Coolant flow rate: 17 l/min at 70 bar Coolant pressure: 70 bar External coolant pump: 100 l/min at 1.4 bar Filter capacity: approx. 250 l/min Hodpfx Ae Afhlaspdjw Dimensions of the coolant system (L × W × H): approx. 2,200 × 1,500 × 2,250 mm EQUIPMENT 6-position pallet changer 4th axis Knoll high-pressure system Tool magazine with 120 tool positions, prepared for 240 tool positions Tool changer with 31 tool positions Loading and setup station 2 spiral chip conveyors KNOLL coolant system with scraper conveyor and lift pump Coolant pump KTS25-50 for coolant supply through the spindle External coolant pump Coolant shower Precision NC rotary table instead of the indexing table Direct measuring system and control extension for the B-axis CE marking Tool breakage monitoring Automatic tool length correction Rotating viewing window Note: The machine has already been dismantled.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, Used HSM V-Press 1160 Plus vertical baler, manufactured in 2014. The unit has been regularly serviced by an authorized service provider since new. The baler is fully functional and in very good technical and visual condition. Pressing force: 594 kN Voltage / frequency: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale dimensions (length x width x height): 1200 x 1100 x 1200 mm Machine dimensions (width x depth x height): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Materials to be baled: plastic film, mixed paper, cardboard, die-cutting waste We also have other balers in stock. Transport costs depend on weight, volume, and, most importantly, distance. When inquiring, please provide the delivery address (postal code and town/city). For further details, please contact us by phone to discuss transport costs and other delivery options. Hodpfx Ape Ad Ur Dsdow We sell and export worldwide; thanks to our extensive storage capacity, we can also supply larger quantities quickly and flexibly. We issue intra-Community invoices (VAT-exempt). Opening hours: Mon–Fri: 8:00 AM – 4:00 PM Sat: Closed

Condition: good (used), Year of construction: 2007, machine/vehicle number: 6497, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 7 m/min, actuation type: manual, total height: 1,300 mm, total length: 3,100 mm, total width: 1,320 mm, overall weight: 550 kg, Equipment: CE marking, documentation/manual, Hebrock edge banding machine, model top 2000 plus, edge banding machine with hot-melt adhesive application to the workpiece for edge material up to 3 mm. High-frequency miter saw station (flush miter station), angled table rollers, automatic edge transport, stepless electronically adjustable temperature display with LED actual value display, protective cover, - Pneumatic miter station for edge thickness up to 3 mm (pre-cutting of the edge material) - High-frequency combination flush trimming station with interchangeable blade cutter - Surface scraper blade (without pneumatic extraction device) min. workpiece width 90 mm, workpiece thickness 10 - 45 mm, min. workpiece length 260 mm, max. edge material height 50 mm, Hjdpfxs Agakqe Apdjw extraction nozzle D = 100 mm, compressed air connection min. 7 bar Weight approx. 550 kg as inspected, ex works Seevetal, excluding transport, subject to prior sale

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 1572, functionality: fully functional, operating hours: 5,500 h, power: 55 kW (74.78 HP), cutting height (max.): 1,000 mm, cutting width (max.): 1,200 mm, control type: PLC-controlled, overall weight: 20,000 kg, High-quality and complete Mebor wood processing line in excellent condition. Can be seen in operation in Gemert, the Netherlands. Included are: - Horizontal band saw HTZ 1200 Plus /year of manufacture 2019/, equipped with heavy-duty hydraulics for automatic log processing, maximum cutting length 9m, Optifast 10 control system - Multi-blade saw VR 900 /year of manufacture 2020/ with 3 movable heads - Log loader MLD Logdeck - 2x RCM 800 with left/right sorting - 2x CCP conveyor chains Excellent synchronization with the main band saw for maximum efficiency. The complete line has been professionally maintained and is ready for immediate use. Serious buyers are welcome to visit and see a demonstration on-site /in operation/. Hsdpjz Eadbjfx Apdjw Please include your company details /including VAT number/ if you are interested.

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Hsdezzrmpspfx Apdew Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Control type TNC 620

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bale dimensions: 120 x 110 x 120 cm Hodpfxj Aguyze Apdew Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AB00029039, feed length X-axis: 3,050 mm, feed length Y-axis: 900 mm, feed length Z-axis: 60 mm, input frequency: 50 Hz, input current: 31 A, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, working width: 900 mm, total width: 2,159 mm, total length: 3,459 mm, total height: 1,500 mm, SCM Startech CN Plus R F23L CNC drilling, grooving and routing centre, manufactured in Italy in 2023. The machine is currently installed in Pejë, Kosovo, and can be inspected under power by prior appointment. Machine identification: - Manufacturer: SCM - Model: Startech CN Plus R F23L - Year of manufacture: 2023 - Serial number: AB00029039 - CE version - Machine weight: 1,383 kg Main equipment: - F23L drilling head Hjdpo Afnhhjfx Apdsw - 13 independent vertical drilling spindles: 7 in X and 6 in Y - 10 horizontal drilling spindles: 6 in X and 4 in Y - Drilling motor power: 2.2 kW - Drilling spindle speed: 4,200 rpm - 5.5 kW vertical electrospindle for routing operations - Electrospindle speed: 1,000–18,000 rpm - ER32 collet with manual tool change - Maximum routing tool diameter: 20 mm - Integrated grooving saw in the X direction - Maximum saw blade diameter: 125 mm - Saw blade speed: 5,500 rpm - Automatic workpiece positioning and side alignment - Centralised lubrication system - SCM Maestro CNC software with Hicam machine interface - PC control with 19-inch display - Barcode program support - Uninterruptible power supply unit (UPS) - Additional Maestro CNC hardware key Working capacity: - Maximum panel dimensions: 3,050 × 900 × 60 mm - Minimum panel dimensions: 200 × 80 × 10 mm - Maximum axis speed X/Y/Z: 40/40/10 m/min - Maximum vertical drilling depth: 30 mm Installation data: - Electrical supply: 400 V, 3+N, 50 Hz - Input current: 31 A - Installed power: 20.7 kVA - Compressed-air consumption: 50 Nl/min The machine is used, fully functional and available for demonstration under power. Availability: by arrangement. Sale basis: EXW Pejë, Kosovo. Dismantling, loading and transport can be arranged separately. Further technical information, documentation and an operating video are available on request.

Condition: ready for operation (used), Year of construction: 2017, number of axes: 3, This 3-axis Mitutoyo Crysta-Plus M7106 was manufactured in 2017. It features a measuring range of 700 x 1,000 x 600 mm and is in near-mint condition with very low operating hours. The machine includes a Renishaw probe head and is regularly serviced. If you are looking to get high-quality 3D measurement capabilities, consider the Mitutoyo Crysta-Plus M7106 gantry robot we have for sale. Contact us for further details. Hjdpo Agwwvjfx Apdjw - Measuring Range (X / Y / Z): 700 x 1,000 x 600 mm- Operating Hours: Very low (rarely used)- Technical Condition: Near-mint / Exceptionally good condition- Measuring Range (X / Y / Z): 700 x 1000 x 600 mm- Maximum Spatial Diagonal Tested: Up to 1515 mm- Controller Type: UD1- Software Version: MCOSMOS-1 v4.2R1- Probe Head: Renishaw MH20i- Probe: Renishaw TP20- Probe Module: Standard Force (SF)- Stylus Configuration: Length 20 mm, Stylus ball diameter 3.9924 mm- Maximum Permissible Length Measurement Error (EL, MPE): 4.5 + 4.5 * L/1000 µm (where L is in mm)- Single Stylus Form Error (.1x25:SS:Tact): 3.6 µm (MPE: 4.5 µm)- Last Calibration Date: 04.04.2023

Condition: excellent (used), Year of construction: 2017, operating hours: 37,280 h, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, torque: 2 Nm, controller manufacturer: Fanuc, controller model: 31i- B5, spindle speed (max.): 54,000 rpm, operating hours of spindle: 11,360 h, spindle nose: HSK-E 32, number of slots in tool magazine: 40, tool length: 200 mm, tool weight: 1,200 g, 5-Axis Mill-Turn Center Hodpfxe Agr Nto Apdsw We offer you: Manufacturer: Chiron Model: FZ08 MT Precision+ high speed plus Year of manufacture: 2017 Control system: Fanuc 31i-B5 Technical Specifications: Travel ranges: X-axis: 210 mm Y-axis: 200 mm Z-axis: 360 mm B-axis: -10° to +100° C-axis: 360° Main spindle: Speed range – main spindle: max. 54,000 rpm Drive power – main spindle (100/25%): 3.5 / 5.2 kW Torque: max. 2 Nm Turning spindle: Max. bar capacity: 32 mm Speed range: 15 – 8,000 rpm Drive power (100/15%): 9 / 12 kW Torque: max. 14.3 Nm NC 2-axis swivel unit: Swivel angle: -60° to +180° NC rotary table diameter: 170 mm Tool changer: Tool holder: HSK-E 32 Number of tool positions: 40 pos. Max. tool diameter: 45 / 100 mm Max. tool length: 200 mm Max. tool weight: 1.2 kg Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.5 sec Feed rates: Rapid traverse (x/y/z): 75 m/min Operating hours: approx. 37.280 h Spindle hours: approx. 11.360 h Please refer to the attached PDF for technical specifications and accessories. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. We reserve the right to make changes and correct errors in the technical data and specifications, and to sell items prior to order confirmation!

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 43,209 h, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser hours: 26,141 h, laser power: 2,500 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of cooling: water, Equipment: cooling unit, documentation/manual, emergency stop, safety light barrier, We are offering this used LVD SIRIUS 3015 Plus laser cutting machine, manufactured in 2015. Manufacturer: LVD Model: SIRIUS 3015 Plus Year of manufacture: 2015 Hjdpfx Aez Iha Ajpdew Condition: Used Category ID: 1041 Type ID: 1180 Machine type: Laser cutting machine LVD Sirius 2.5 kW CO₂ laser cutting system with exchange table – large format 3,000 × 1,500 mm – fully functional For sale is an LVD Sirius laser cutting system with a CO₂ laser power of 2.5 kW (2500 W). The machine is fully functional and can be inspected on-site and tested in operation after prior arrangement. Technical data / Equipment * Manufacturer: LVD * Model: Sirius * Laser power: 2.5 kW / 2500 W * Laser type: CO₂ laser * Table format / working area: approx. 3,000 × 1,500 mm * Large format laser cutting system * Exchange table with 2 tables * Suitable for industrial metal processing * Used, fully functional Inspection and functional test An on-site inspection and functional test is explicitly possible. The machine can be inspected and tested in operation after scheduling an appointment. Dismantling and collection The machine will be ready for dismantling from December 15th. The complete dismantling, transport and loading will be carried out by the buyer at their own cost and responsibility. The buyer is responsible for the necessary organization, personnel and suitable equipment and tools for dismantling and loading. If you are interested or have any questions about the machine, please do not hesitate to contact us. An on-site inspection is possible after prior arrangement.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, overall weight: 250 kg, load capacity: 10 kg, arm reach: 1,450 mm, controller manufacturer: ABB, controller model: IRC5 Compact, teach pendant manufacturer: ABB, teach pendant model: DSQC 679, input voltage: 230 V, input current: 5 A, type of input current: AC, Equipment: documentation/manual, Based on the data you provided, the standard description in Hungarian is as follows: ABB IRB 1600-10/1.45 industrial robot with IRC5 Compact controller and ABB FlexPendant. The robot is unused and has 0 operating hours. Robot: Manufacturer: ABB Model: IRB 1600 Robot variant: IRB 1600-10/1.45 Protection: Foundry Plus Payload: 10 kg Reach: 1,450 mm 6-axis industrial robot Year of manufacture: 2020 Manufacturing date: 28.02.2020 Serial No.: 1600-517625 Robot weight: 250 kg Controller: ABB IRC5 Compact Manufacturing date: 27.02.2020 Supply voltage: 1 x 220/230 V Frequency: 50-60 Hz Rated current: 5 A Short-circuit rating: 6.5 kA Net weight: 30 kg Teach Pendant: Hsdpfxsz D Tf Nj Apdjw ABB FlexPendant Model: DSQC 679 Article No.: 3HAC028357-001 Revision: 14 The robot is unused and has 0 operating hours. Located in Hungary. Further technical information, photos and documentation are available on request. If you have any questions or require further information, please send us a message or call us.

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 183 h, control type: CNC control, controller manufacturer: CYBELEC MODEVA BAC 2D Control, controller model: CYBELEC MODEVA BAC 2D Control, bending force (max.): 290 t, working width: 4,000 mm, Equipment: documentation/manual, BOSCHERT G-Bend Plus 4290 Hsdpfxjywfp Ss Apdow

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Hodpfjz Aafpex Apdow Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed