Used Cover Feeder for sale (9,952)

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 122, Cover folder feeder, Minimum case size: 140 x 308 mm, Maximum case size: 485 x 1002 mm, Maximum mechanical speed: 1,000 - 6,000 cycles/h, Minimum case weight: 200 g/m², Maximum case weight: 400 g/m² Cjdpfx Abox Apfro Tork

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Technical data: Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Credpjvkt N Ujfx Ab Tjk Equipment: – elements for fixing the cardboard – module for wrapping the cover

Condition: used, The Wahli-Stream Feeder TM 530 is a reliable feeder designed for efficient paper handling. Manufactured by Wahli, this model is located in Germany, with pricing available upon request. The machine supports an A2 format and is designed to enhance productivity in printing and finishing operations. Format: 360 420 mm Equipment: Crodjvphzpepfx Ab Tok AUTOMATIC ENVELOPE FEEDER (with vacuum suction) SUITABLE FOR PRESSES WITH STREAM / SINGLE SHEET FEEDERS ADJUSTABLE VACUUM, HEIGHT & SPEEDDELIVERY CONVEYOR MIN ENVELOPE SIZE: 7.6 x 12.7 CM MAX ENVELOPE SIZE: 36 x 42 CM

Condition: excellent (used), Machine in very good condition. Credpfx Abjvllbre Tjk It has worked to the end, now it is on warehouse not connected to power. Machine in 100% completed Hu3Nhjg Parts conveyor, chips conveyor, bar feeder available. Spindels bore 42 mm IRCO feeder bar All manuals and documentation available

Condition: excellent (used), machine/vehicle number: 41206972, WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Crjdpfx Aboxuhy Ss Tsk Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Cedpfemk S Slsx Ab Tork Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Year of construction: 2003, condition: excellent (used), Feeder Caps 8006 automatic disc feeder, sorting machine Fully automated, variable dosing speed, manual height adjustment. Stainless. Year of production: 2003 Power: 0.55kW max. dosing capacity: approx. 1000 pcs / min Diameter: 1400mm Siemens control. Purchase of industrial equipment and machinery. Cedpfxeg Rkwme Ab Tjrk Wide Range of Used Machinery, Industrial Equipment

Year of construction: 2005, condition: excellent (used), diameter: 1700mm Crodpfx Ajfd E R Aeb Tok Stainless steel

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH vibrating feeder bunkers are high-efficiency equipment designed to ensure continuous and balanced feeding of crushers in stone crushing and screening plants. These bunkers are placed in front of primary impact crushers or jaw crushers to ensure a homogeneous flow of material. This increases the capacity of the crushers, balances the loads on the intermediate crushers, and ensures continuity in the overall production line. The vibrating feeding system prevents sudden loads, eliminating the risk of overloading on conveyor belts and thermal damage to equipment. Thanks to CONSTMACH's special design, the vibrations in the bunkers are smooth and balanced. This ensures both a steady material flow and extended machine life. Otherwise, uneven feeding could cause serious wear on crusher hammers, conveyor belts, and bearings. Using a vibrating feeder bunker helps reduce maintenance costs, increase operational efficiency, and maintain long-term performance throughout the facility. Vibrating Feeder Bunker Technical Specifications Model: CPG - 09 Body Size: 2,500 x 520 mm Grid Size: 820 mm Motor Power: 2 x 3 kW Bunker Volume: 8 - 10 - 15 m³ Capacity: 80 - 100 t/h Weight: 8,000 kg Model: CPG - 10 Body Size: 3,000 x 850 mm Grating Size: 1,160 mm Motor Power: 2 x 4.5 kW Hopper Capacity: 10 - 15 - 20 m³ Capacity: 150 - 200 t/h Weight: 12,000 kg Model: CPG - 11 Body Dimensions: 4,600 x 1,100 mm Grate Dimensions: 1,400 mm Motor Power: 2 x 9.2 kW Bunker Volume: 15 - 20 - 30 m³ Capacity: 200 - 300 t/h Weight: 18,000 kg Model: CPG - 13 Body Size: 4,880 x 1,370 mm Grating Size: 1,840 mm Motor Power: 2 x 11 kW Bunker Volume: 30 - 45 - 50 m³ Capacity: 350 - 500 t/h Weight: 26,000 kg Why Choose CONSTMACH Vibrating Feeder Bunkers? CONSTMACH is a trusted brand in the industry with years of engineering experience and high production standards. Our products stand out with their durable body structure, low maintenance requirements, and energy-efficient motor systems. Each one undergoes high-quality control processes to ensure long-lasting use. CONSTMACH Vibrating Feeders increase the performance of your crushing plant while minimizing your operating costs. If you are looking for quality, durability, and maximum efficiency, CONSTMACH is the right solution. What Do We Do at Constmach? Credpfsxqf Sdjx Ab Tek Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable Cjdpfx Aowd Nthjb Terk VFD on conveyor drive

Condition: new, functionality: fully functional, color: yellow, Year of construction: 2025, • The Fabo Wobbler feeders are designed to feed sticky, wet and large materials comfortably and clean to the crusher with an ellipse-shaped bar and unique motion mechanism. With its self-cleaning structure, it eliminates the problem of obstruction and stone compression. • Work with wet and sticky materials without clogging and jamming. • Adjustable feed rate. • It occupies less space and has smaller height. • It works without dust, vibration and noise. • Low power consumption and maintenance frequency. • Width: 1400 mm • Length: 2500 mm • Motor power: 22 kW • Bar number: 5-9 • Elliptical bar shape • Aperture: 25-150 mm • Feeding size 50-1.500 mm • Chainy drive system • Max. Capacity 200-300 T / s Credsxl R D Uopfx Ab Tsk • Capacities calculated according to the specified material density (1.6 tn/m3)

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Credpfxoh Eibas Ab Tok Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: used, functionality: fully functional, machine/vehicle number: 40996622, type of input current: AC, input voltage: 230 V, Envelope feeder Stenz Feeder in Swiss quality. Crodpfx Abowptgpo Tek Without delivery table. Envelope feeder for printing envelopes at full speed for shingling unit (e.g., on a Ryobi524GX) but also suitable as single feeder (Gto). Suction belt renewed in 2019.

Condition: ready for operation (used), Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages. Crsdstz Dkaopfx Ab Tsk

Condition: new, functionality: fully functional, Year of construction: 2025, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Crjdpsxqcn Ajfx Ab Tjk Gearbox: Heavy-duty type Walking Platforms: Available Steel Feet: Available Why Choose CONSTMACH Wobbler Feeders? CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Diameter: 900 mm Codsh Eyghepfx Ab Tjrk

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide Crodpfx Abew D Ev Ej Tok More pictures and videos available upon request

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Crjdew Rvu Dopfx Ab Tsk Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: good (used), In this offer you acquire a used longbow feeder "Canon BDT VX 370". Csdpel Axtgjfx Ab Terk Item for sale: 1 x Canon BDT VX370 suitable for: Canon imagePRESS C10000VP Canon imagePRESS C8000VP Ricoh Pro C7100 Serie Ricoh Pro C9100 Serie Condition: This is a used unit and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function Packing and shipping: You are welcome to view the unit during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available upon request! Before shipment or collection, a function test will be recorded on video for you. For more information, you can of course also contact us personally.

Year of construction: 2004, condition: reconditioned (used), Walter double saw with TRKS 200 feeder double saw blade cutting height 200 mm, engine power 40 kW, chain feeder with drivers with adjustable prism for different diameters. Gear to regulate the speed of feeding the material. Credpfx Abeh R Tvte Tek

Condition: excellent (used), Manufacturer:REO-USA type: reovib mts 442 Electrical data: 230 V; 60 Hz; dimensions: 610 x 560 x 1180 mm Cjdpfx Abot H Nk No Terk plate diameter: 330-380 mm weight: 223 kg

Condition: reconditioned (used), functionality: fully functional, Rabolini mod. Imperia D, with feeder unload, with Hot Foil System 2 advances Size 80/120 cm, Pneumatich clutch, Lateral register square 3 work mode, 6 sector HOT PLATE Original HOT FOIL SYSTEM WITH 2 advances, Csdpfstp T Hxex Ab Tork Feeder original RABOLINI, Review machine.

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module – delivery table Technical data: Max format: 840x500mm Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Cedeuz T Ipepfx Ab Tork Consumption: 3.7kW Machine weight: 500kg

Year of construction: 1990, condition: good (used), Various collets and holders Approx.300 pieces. For DECKEL milling machines FP1 -FP2-FP3-FP4 Single sale demand inquiries. Cedpfxjhvz Iis Ab Tsrk

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Crodpfx Aex Dkk Ssb Tok Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!