Used Cop Glasse Machine for sale (69,134)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Vertical glass drilling machine, 1500 x 3000 Max. glass size: 1500 x 3000 mm Glass thickness: 3 – 20 mm Drilling diameter: 3 – 100 mm Control: NC controlled Drilling heads: 2 opposing drilling spindles (front and rear) Spindle speed: Adjustable via inverter Iedpfxjy Nltno Ah Eetl Total floor dimensions: 7500 x 2200 x 2800 mm Excellent condition Good working order, tested As is Available immediately

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg Iedpfoz Aplxsx Ah Eetl EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: G5-M030-13-2V-R10-15, total length: 7,200 mm, total height: 2,700 mm, input voltage: 400 V, total width: 2,700 mm, Technical Specifications Brand: Schraml Model: TopDRILL M-RX 130 Roto-10 Year: 2015 Direction of rotation: Right to left Condition: As is (Very good condition) Parameter Specification / Capacity - Machining height / Max. 1300 mm - Maximum glass height / Unlimited (Open-top model / open-top design) - Maximum glass length / 3200 mm - Glass size for drilling min. 600 x 210 mm - Glass size for milling min. 750 x 210 mm - Maximum glass weight 150 kg - Glass thickness for drilling 4 - 40 mm - Glass thickness for milling 4 - 20 mm - Tool magazine (Roto) Automatic double revolver magazine 10 + 10 (front and rear), total 20 positions - Tool diameter Up to max. 80 mm - Tool connection 1/2" gas thread with length 75 mm - Spindle speed 0 - 12,000 rpm - Spindle cooling Water-cooled - Control & Software Schraml software with Siemens electrical components - Included accessories Automatic sharpening device for tools - Separate vacuum pump for glass fixing - Additional conveyor (1 meter) - Machine dimensions L 7200 mm x W 2700 mm x H 2700 mm - Machine weight 3800 kg - Electrical connection 3x400V + N + PE, 50/60Hz, total power: 25 kW Itjdpjz A D H Uefx Ah Eel Dismantling, loading and installation can be carried out on request by our service team.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical glass washing machine Maximum working height: 1300 mm Open top Working direction: from left to right 4 brushes (2 pairs) Ijdpfey Uhmujx Ah Eetl Glass thickness: 4 - 12 mm More technical information can be found attached as Tech. data file In very good and clean condition Good working order, tested As is Available immediately See video

Condition: used, Year of construction: 2005, Used straight-line edging machine, BOTTERO Type 108 F, manufactured in 2005. Iedpfx Aheza Amre Eotl

Condition: new, Year of construction: 2025, machine/vehicle number: 1110119739228, functionality: limited functionality, overall weight: 100 kg, We are selling, on behalf of and for the account of the relevant party, the following damaged/untested machine to the highest bidder. Functionality is untested. By submitting a bid, the machine is purchased as is, where is. Key cutting machine Manufacturer: Silca Model: Quattrocode - D700 Weight: approximately 100 kg gross The machine sustained mechanical damage, likely due to a fall or tipping incident. A puncture of the cardboard material is visible on the top of the outer packaging. According to reports, the machine was found loosely placed on a wooden pallet upon delivery. In addition, it was rotated approximately 90° compared to its original packaging arrangement. The angle profiles intended for securing the machine were detached and were no longer in their intended locking position. The rear black plastic cover is partially broken off. Several broken plastic parts were lying loose on the pallet. The transparent, hinged protective cover of the machine has a continuous crack. Furthermore, several cracks can be seen on the housing body in the area of a rear corner. After removing the rear plastic cover, no further damage to the internal components is visibly apparent. A functional test of the machine was not performed. Damage to the internal electronic components cannot be ruled out. Sale basis: Iedoz A R Hzjpfx Ah Eetl loaded onto a truck at the location DE-Velbert.

Condition: used, BAVELLONI GEMY 11 - Year 2005 Straight-line grinding machine, 11 grinding wheels Straight-line edging machine for 11 wheels Minimum workable dimensions: 35 x 35 mm Thickness: from 3 to 40 mm Power: 22 Kw Speed: from 0.5 to 5 m/min Iedjzq Afzjpfx Ah Eetl Total linear meters processed: 459,788

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Ijdpfx Aszkbireh Estl Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 1780021272, functionality: fully functional, 3 spindle copy router elumatec KF 178/00 Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Itedpfx Ahozy Stae Eol Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Cobtjzmn N Reiaf Smorg Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg We can ship the machine to your address.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Iodpfxoxz Skns Ah Ejtl Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Shipping on demand

Condition: used, scoring head, glass cutting table, glass cutting table, glass cutting machine -Number: 21x scoring heads available Itsdpfx Asb Nfcujh Ejl -Manufacturer: Eitzenberger Luftlagertechnik GmbH -Item no.: 093329 -Price per piece -Dimensions: 310/160/H60 mm -Weight: 0.5kg/pcs

Condition: reconditioned (used), Year of construction: 2006, operating hours: 35,435 h, functionality: fully functional, total length: 5,940 mm, total width: 1,800 mm, total height: 2,400 mm, year of last overhaul: 2023, Completely overhauled by the main dealer with genuine parts in 2023. Was hardly used, and looked after throughout. Ijdpfovw At Ajx Ah Estl The machine has been hardly used and it is fully operational and ready to go. Transport is not included, but can be arranged for a fee. Subject to location.

Condition: good (used), Pantograph Milling / Engraving Machine Stock number: 3098 Manufacturer: Scripta Machine number: Type / Model: SR 300 Travel range x-y-z: mm Pattern table / working table: 600 x 400 // 600 x 250 mm Speed range: 700 to 18,000 rpm, stepless Transmission: 1 : 1.33 to 1 : 10 Accessories/equipment: Font sets; others (see pictures) Power requirement: kW Condition: good Isdpsy H Hhbofx Ah Eetl Weight: 0.7 t

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: 202101410, For sale: a brand-new, unused Junya horizontal car wash – Chinese-made, purchased in 2022. It was bought to set up a second lamination line, but this plan was not implemented. The machine is assembled and ready for use in the workshop; all that is needed is to fill it with water. The machines are of very good quality and operate reliably across three shifts. Price: PLN 95,000 net. Terms negotiable. Itsdpfxezqtbye Ah Eol

Condition: used, Copy Milling Machine DECKEL Model: KF 1 Machine No.: 61510 Year of manufacture: 1981 Weight approx.: 1 t Isdpfoz A Hmwsx Ah Eotl

Condition: used, Year of construction: 2024, functionality: fully functional, Compact Vertical Glass Edge Grinding Machine for Rectangular and Shaped Glass Glass height: 2,500 mm Glass thickness: 2.3 - 19 mm (pass-through transport up to 30 mm) Minimum size: 350 x 180 mm Itjdpfeztnn Hox Ah Esl Maximum size: 3,500 x 2,500 mm Transport height: 520 mm Grinding speed (edge): max. 30 m/min at 2.3 - 9.2 mm Surface grinding speed: max. 30 m/min at 2.3 - 3.7 mm Surface grinding speed: max. 20 m/min at 3.7 - 5.6 mm Load: max. 150 kg/m, 250 kg/m with pass-through transport

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system. Ijdpszzzm Eefx Ah Eetl

Condition: excellent (used), Year of construction: 2021, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 220247, total length: 18,000 mm, total width: 4,000 mm, total height: 3,000 mm, input frequency: 50 Hz, input voltage: 400 V, pressure: 7 bar, The HE 500 is a double-edging line – L-shaped – consisting of 2 grinding machines connected at an angle. The first machine is designed for processing wider sheets of glass, while the second is for narrower sheets. At the inlet of the second machine, there is a centering device that corrects the position of the glass. Technical specifications of HE500: Minimum working size – 400x200, Working thickness – 3 – 25, Oscillating spindle – 1+1, Diamond spindles for grinding flat edges – 2+2 Diamond spindles for grinding bottom bevels – 1+1 Polishing spindles for bottom bevels – 1+1 Diamond spindles for grinding top bevels – 1+1 Polishing spindles for top bevels – 1+1 Polishing spindles for flat edges – 3+3 Spindles for rounding corners – 1+1 Engraving spindle – 2+2 Empty positions – 0 Total power of the XE line installation (kW) – 120 Conveyor belts, motorization: Belts driven by 4 brushless motors Mobile bridge movement Ball bearing guides, controlled by two brushless motors Itsdpfx Ahozznuis Eol Summary: Bavelloni HE500L Double Edging Line – 1 set. TT5130 feeding table – 1 piece. Horizontal washing machine 2800 – 1 piece.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 806, overall weight: 4,600 kg, workpiece weight (max.): 2,000 kg, workpiece height (max.): 55 mm, number of spindles: 13, TECHNICAL SPECIFICATIONS Glass thickness: 3–55 mm Minimum glass size: 35 x 150 mm Maximum glass weight: 2,000 kg Speed: 0.3–5 m/min Number of spindles: 13 Itedpfoyk Skzex Ah Eol MACHINE DETAILS Power: 26 kW Operating pressure: 8 bar Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 9,590 x 1,350 x 3,700 mm Machine weight: 4,600 kg

Condition: used, functionality: fully functional, FOREL Insulating Glass Line - Washing Machine (6 brushes, Low-E) FOREL VW2500 (2009) Itjdpoy If Ayjfx Ah Esl Max Height: 2500 mm Min. Dimensions: 310x160 mm Thickness: 3-40 mm - Scanner LISEC (2014) - Gas Press FOREL APG 250 (2009) Max. Dimensions: 2500x4500 mm Min. Dimensions: 190x320 mm Max Manual Opening: 69 mm Working Direction: Right to Left

Condition: good (used), x-travel 300 mm y-travel 160 mm z-travel 360 mm Total power requirement 1 kW Machine weight approx. 0.8 t Itjdpfxew U Shhe Ah Eel various engraving kits

Condition: excellent (used), in very good condition. Drilling height: 60 mm Itedpfeuflycsx Ah Eel 6 drilling units (1.5 kW motors) Rotary heads Table working length: 250 cm Adjustable base Drill spacing on heads: 32 mm Number of drills: 12 x 6 heads

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: Isdpfx Ajq I N H Neh Estl 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 112672, total length: 6,700 mm, working height: 840 mm, workpiece weight (max.): 350 kg, controller model: RS150, workpiece height (max.): 35 mm, TECHNICAL DETAILS Processable glass thickness: 3-35 mm Processable dimensions (with corner bevel 15 mm) min.: 45 mm Processable dimensions (without corner bevel) min.: 35 mm Permissible weight per conveyor meter max.: 200 kg/m Total load: 350 kg Working speed: 0.5-5 m/min Pneumatic feed pressure: 6 bar Water tank capacity: 360 L MACHINE DETAILS Control system: RS150 Total installed power: 16.5 kW Pneumatic feed pressure: 6 bar Water tank capacity: 360 L Dimensions & Weight Dimensions (L x W x H): 6,700 x 1,300 x 2,300 mm Height of working level: 840 mm Total weight (with empty water tank): 2,600 kg EQUIPMENT NC with automatic speed adjustment ABS covers for sound insulation and safety Multi-functional NC Centralized lubrication Adjustable glass removal rate Front adjustment of the rear arrising wheel Stainless steel housing and tanks CN 23 operator interface Itjdsyk Spwopfx Ah Ejl Programmable logic controller (PLC) integrated in NC Liquid crystal display (LCD) Control keypad with sensitive keys

Condition: excellent (used), Milling machine, copy router in very good working condition. Iedpfx Aox Rrtdjh Estl