Used Converting Machine for sale (66,675)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Table dimensions: 500 × 250 mm Max. longitudinal travel: 600 mm Max. cross travel: 280 mm Max. vertical travel: 340 mm Distance spindle center–table: 500 mm Max. grinding area: 250 × 500 mm Table speed (longitudinal): 1–25 m/min Cross feed: 0.1–10 mm/stroke Continuous cross feed: 1000 mm/min Grinding wheel dimensions: Ø355 × 25 × Ø127 mm Grinding spindle speed: 1500/1800 rpm Grinding spindle power: 2.2 kW Hydraulic pump power: 0.75 kW Graduation of vertical handwheel: 0.005 mm Machine weight: approx. 1350 kg Accessories, Equipment - Operationspanel with touchscreen - Magnetic chuck: 500 × 250 mm - Integrated dressing unit - Wet grinding device with paper band filter - External hydraulic unit - Portable electronic handwheel - Machine light Iodoz Szhcopfx Ahyjih - Automatic vertical feed - Machine documentation The machine was barely used and is available for immediate sale.

Condition: good (used), Year of construction: 1985, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 315 mm bore stroke 180 mm turning speeds 130 - 3500 U/min table-size 615 x 470 mm Iedpfjz S N Drox Ahysih column diameter 155 mm feed 0.1 / 0.2 / 0.3 mm/U spindle taper MT 4 MK engine output 2.0 / 2.4 kW weight 450 kg range L-W-H 800 x 650 x 2100 mm Features: - Heavy-duty column drill press - With extended column (200 mm) - Drive: "VARIO" V-belt * Continuously variable speed control - automatic spindle feed (0.1/0.2/0.3 mm/rev) * with electromagnetic engagement - pole-changing motor - clockwise rotation of the drill spindle - adjustable fixed drill depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Machined base plate - Coolant system in the machine base - Machine light - Emergency stop button on the front - Operating instructions (PDF)

Condition: good (used), Year of construction: 2001, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 55.0 mm throat 335 mm bore stroke 200 mm bore spindles - Morse Taper MK 4 turning speeds 60 - 1.530 U/min table: 740 x 620 mm feed 0.15/0.2/0.3/0.36 mm/U total power requirement 2.6 / 3.1 kW weight of the machine ca. 850 kg range L-W-H 800 x 1150 x 2040 mm Machine comes from a vocational training workshop Good condition (!!) Features: - Heavy-duty/robust bench-mounted drill press - Drive: "VARIO" V-belt - Automatic spindle feed (0.15/0.2/0.3/0.36 mm/rev) - Stepless speed adjustment - 2 work tables with T-slots * Height-adjustable via hand crank - Adjustable drilling depth stop - Pole-changing motor - Machine light - Emergency stop button, front - Operatorâ??s manual Iiedpjz S N Dxofx Ahyoh

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 174688 € 3301.6 € 3 kW Manueller Tisch 16 mm 8 mm 8 mm 5 mm 8 mm 3060 x 1530 mm 3060 mm 1530 mm 140 mm 3048 x 1524 mm 160 kg/m² 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software LANTEK for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Multi-chamber suction system Isdsx U Elhepfx Ahyoih Remote maintenance access Aircondition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW Mild steelS235 20 25 Stainless steel(304) 10 15 Aluminium (5083) 12 20 Copper 6 10 Brass(CuZn39 Pb3) 10 12 OPTIONS: Suction unit with filter Shuttle table

Condition: ready for operation (used), grinding length: 2,500 mm, grinding wheel diameter: 750 mm, grinding diameter: 400 mm, distance between centers: 2,500 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 25 rpm, workpiece spindle speed (max.): 360 rpm, Newall Cylindrical Grinder 400 x 2500mm Model: LA 96 Capacity: 400 x 2500mm Wheel Size: 75 x 750mm Work Head Speeds: 25-360 RPM Machine With: 2 Steadies Swivel Table Iisdpfxez S Nmye Ahysh Coolant System

Condition: excellent (used), Year of construction: 2003, operating hours: 23,273 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 1,400 mm, workpiece width (max.): 900 mm, workpiece height (max.): 240 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 13,200 kg, spindle motor power: 32 W, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1.200 Y-axis travel mm: 900 Z-axis travel mm: 500 Rapid traverse m/min: 30 Worktable Table dimensions mm: 1.400 × 900 Max. workpiece weight kg: 1.800 Maximum workpiece size (W x L x H ) mm: 1.400 × 900 x 240 Spindle Spindle speed rpm: 10.000 - 16.000 - 24.000 Spindle drive power kW: 32 Spindle torque Nm: 200 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 Max. Tool Diameter: 125 Max. Tool Length mm: 300 Iijdpfx Aoz S Uddohyeh Max tool weight kg: 4 Chip-to-chip time s: 6,5 Equipment Electronic Handwheel Chip conveyor Workarea light Cooling Tank capacity: 300 L Machine running times Under power: 103.179 Rated power kVA: 31 Operating Time: 23.273 Basic machine dimensions / weight Length mm: 4.000 Width mm: 3.000 Height mm: 2.800 Weight kg: 13.200

Condition: used, machine/vehicle number: 008606, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 5 No of Top Units: 2 Isdpfx Ahszqz Rcjysih Positioning of Units by NC: yes Lateral horizontal groups: yes

Condition: used, machine/vehicle number: 008495, X axis working area: 4175 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Iijdpfx Ahjy Edqqjysh Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: used, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Year of manufacture: 2015 Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety feature: - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information Iisdpezavvgefx Ahyjh VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Mosca RO-M-P5 Fusion 650×500 Strapping Machine The machine is 100% functional and ready for production. Manufacturer: Mosca, Germany. An indispensable piece of equipment for shipping departments, ideal for securing heavy packages such as those containing leaflets or catalogs. Isdpfxsz S Uqdj Ahyoih The 5mm PP (polypropylene) strap reinforces the packaging and creates a handle, making it easy to grip and transport the package. Control panel Adjustable strap feed length and tension force Power supply: 230V Weight: 240 kg

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 269588 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 29,9 (mit Absaugung) kW 6100 x 2070 mm 6100 mm 2070 mm 125 mm 6096 x 2032 mm 240 (für 3 - 12kW) / 400 kg/m² 5800 (für 3 - 12kW) / 960 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 42 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Iisdpfx Ajx U Elnshyoh Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 35 40 Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Automatic nozzle change

Condition: good (used), Renz Mobi 500 semi-automatic spiral binding machine In very good condition; manufactured in 2016. A semi-automatic wire-o (spiral) binding machine from the German company RENZ: • Operated via a touchscreen display. • Features the fastest format-changeover capability in its class, managed through an electronic control panel—an essential advantage for small, frequently changing print runs. • Spiral diameter adjustable from 1/4” to 1 1/4” (6.9–32.0 mm) via a control knob. • Quiet operation; does not require an external air compressor. Iiedpez S Ux Iofx Ahyjh • Working width: 105–500 mm. • Mobile unit, easy to relocate. • Includes a delivery (output) table. • No specialized operator training required. Power supply: 230V Weight: 550 kg

Condition: used, all stainless steel belt width 400 mm mobile mesh width 5 mm adjustable speed with air knives Iiedpsz Sy Hqofx Ahyeh with batter pump outside dimensions (l x w x h) : ± 1.400 x 800 x 1.300 mm

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Iiedpextaxwefx Ahyoh Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2018, Müga H 250-5 horizontal CNC machining center" Horizontal CNC machining center Müga Type/Model: H 250-5 Condition: Used New spindle with currently 0 spindle hours Iodpfx Ajz Syxtjhyeih Year of construction: 2018 Technical data Travel distances X / Y / Z: 380 mm / 250 mm / 350 mm B-axis: Swiveling round table: Ø 250mm Rated voltage: 400 V, 3 phases 50 Hz Circuit 1: 250 V 50 Hz Circuit 2: 24 VDC Installed power: 30 kW Pre-fuse: 50 A Pneumatic connection: 6 bar Weight approx.: 60,000 kg Machine dimensions (L x W x H) approx.: 1.7 m x 4.1 m x 2.5 m Equipment - Siemens Sinumerik S 828 D control system - FMB bar loader - Additional coolant filtration for the internal cooling system - Chip conveyor Inquiry item: Transport costs in a customized offer.

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 12900 € 247.68 € 40 to Isdpfx Ahowiq N Ieyoih 285 mm 200x24 mm 660x1250 mm 250 mm 80 mm 10 mm/s 10 mm/s 4 kW 930 mm 1250 mm 650 mm 1250 mm 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 Iisdpfxez Sw Nis Ahyeh TruBend Center 5030 :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: ready for operation (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 2,066 rpm, spindle speed (min.): 30 rpm, Huron MU6 Universal Milling Machine Model: MU6 Table Size: 2000 x 460mm ‘X’ Longitudinal Travel: 1500mm ‘Y’ Cross Travel: 700mm ‘Z’ Vertical Travel: 550mm Spindle Speeds: 30 – 2066 RPM Spindle Taper: 50 INT Iiodpfxjz S Nkre Ahyoh Machine with: Digital Readout

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Isdez S Egispfx Ahyjih Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 804, overall weight: 24 kg, total height: 3,600 mm, total length: 6,000 mm, total width: 4,700 mm, We offer this used Sumitomo NPG-2×1000 gearwheel grinding machine, year of construction 1996. Manufacturer: Sumitomo Model: NPG-2×1000 Serial number: 804 Manufacture year: 1996 Manufacture month: April Machine type: Gearwheel grinding machine Condition: Used Note that our offered price includes the following things : 1)Free loading onto the cargo truck 2)Tarpaulin cover onto skid packaging If you have any questions or need more information, feel free to send us a message or give us a call. The Sumitomo NPG-2x1000 is a heavy-duty, high-precision form-type CNC gear grinding machine manufactured by Sumitomo Heavy Industries. Primarily engineered for finishing high-speed and large-capacity industrial gears, it delivers extreme manufacturing tolerances typically equivalent to DIN Class 1 or 2 standards. Key Machining Capabilities The capacity specifications for the NPG-2x1000 model dictate its maximum part handling limits: Iedpfxsz Rmivj Ahyoih • Maximum Outside Diameter: φ1,060 mm • Minimum Root Diameter: φ50 mm • Maximum Machining Module: 18 mm • Maximum Gear Face Width: 500 mm • Maximum Workpiece Weight: 3,000 kg Physical & Installation Dimensions This industrial grinder features a massive, rigid frame built to mitigate vibrations during heavy-load operations: • Total Width: 4,700 mm • Total Length: 6,000 mm • Total Height: 3,600 mm • Total Machine Weight: 24,000 kg (24 metric tons) • Standard Logistics Requirements: Typically requires 2 units of 40ft High Cubic Containers for teardown transport.

Condition: ready for operation (used), Year of construction: 2017, - USED - 3-AXIS BRIDGE-TYPE VERTICAL MACHINING CENTRE       X-AXIS TRAVEL: 2500 mm Y-AXIS TRAVEL: 1800 mm Z-AXIS TRAVEL: 800 mm DISTANCE SPINDLE NOSE-TABLE: 250 - 1050 mm RAPID FEEDS X-Y-Z: 20 m/min SPINDLE: 10000 rpm; 24,5 - 63 kW; 117-300 Nm; ISO 50 - DIN TABLE SIZE: 2800 x 1700 mm MAX ADMITTED LOAD: 8000 Kg HIGH PRESSURE COOLANT: INCLUDED TOOL MAGAZINE: CHAIN-TYPE ; 60 POS MAX TOOL DIAMETER: 130 mm MAX TOOL LENGHT: 350 mm MAX TOOL WEIGHT: 15 Kg CONTROL UNIT: HEIDENHAIN TNC 640 WEIGHT: 29500 Kg OVERALL DIMENSIONS: 4200 x 7100 x 4500 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER ; LINEAR SCALES ; Isdpfezlu S Aox Ahyeih EXHAUST SYSTEM ; PORTABLE HANDWHEEL ; TOUCH PROBE NOTE: COMPLETO DI N.54 CONI ISO50

Condition: used, total width: 1,400 mm, total length: 1,000 mm, total height: 2,700 mm, Colour: Green Empty weight: 1.500 kg - Drive system: Conventional - Drive system: Gear drive - Power [kW]: 3 - Table type: Fixed table - Table length [mm]: 650 - Table width [mm]: 540 - Drilling depth [mm]: 280 - Drilling capacity [mm]: 40 - Reach [mm]: 315 Isdpjzwc Sbjfx Ahyjih - Tool holder: MK4 - Main spindle power [kW]: 3.0 - Min. spindle speed [rpm]: 1 - Max. spindle speed [rpm]: 1000 - Options: Drill unit feed, Tapping function - Transport dimensions: 1000mm x 1400mm x 2700mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1993, grinding diameter max. 100 mm Isdpfx Ahoz S Nymeysih max. width of grinding wheel 230 mm

Condition: excellent (used), functionality: fully functional, total length: 2,285 mm, total width: 1,525 mm, total height: 2,135 mm, Butler Slotting Machine Model:8" Precision Ijdpfxjz S Nphs Ahyeih Table Area:508mm (Rotary) Throat:500mm Max Under Ram:400mm Stroke:203mm Dimensions: 2285 x 1525 x 2135mm

Condition: used, Year of construction: 1970, max. wheel diameter 900 mm gear width 500 mm Iedjz S Nytopfx Ahysih max. module 1 min. module 10 total power requirement 16 kW weight of the machine ca. 8.500 kg