Used Compressed Air Unit for sale (48,326)

Condition: used, Filter fitting, filter unit COMPAIR for compressor units Compressed air filter Cgsdpohalvdefx Aa Eep Type: CF 0087B ZP Factory No.: 3363006 / 05 / 005 Operating pressure: max. 16 bar Thread connection: G 1 1/2" Flow rate: approx. 8,5 m³/min Filter element- No: CE 0087B - Filter housing made of aluminum weight: 5 kg dimension L x W x H 125 x 110 x 420 mm good condition

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Codsxf Uukspfx Aa Eegp Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source -Enhanced Air Quality: Csdpfx Ajvg U Dxja Eegp Captures and removes airborne contaminants, creating a cleaner and healthier work environment Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 2,500 kg, cooling capacity: 50 kW (67.98 HP), volume flow: 10 m³/h, The Air Liquide cooling and heating system is a process thermostat designed for optimal and precise temperature control for any application demanding rapid, precise, and powerful thermal control between -80°C and +70°C. The temperature control unit works by thermally conditioning the heat transfer fluid Syltherm XLT within a closed-loop circuit. For cooling, liquid nitrogen (LIN) is used as the cryogenic medium to lower the fluid's temperature. For heating, an integrated electric resistance heater raises the fluid temperature to a maximum of +70°C. The conditioned fluid is then circulated from the unit to the external application to enable precise process temperature control. The system is fully automated, ensuring precise and reliable process control with minimal manual intervention. Original paper documentation is included. • Year of manufacture: 2016 • Manufacturer: ALTEC GmbH • Condition: Fully functional • Cooling Capacity: 50 kW • Operating temperature: -80°C - 70°C • Automation: Fully automated operation • Documentation: Original paper documentation included • Heat transfer fluid: Syltherm XLT • Heat transfer fluid flow rate: 10 m³/h • Material: Stainless steel 304L (1.4541) Dimensions: • Width: 1800 mm • Height: 2000 mm • Length: 3500 mm • Weight (empty): 2500 kg • Insulation: PU foam and aluminium sheet cladding Potential Applications Include: • Pharmaceuticals: API synthesis, reactor cooling, vaccine storage, biotech applications. • Food Processing: Flash-freezing, quality preservation. • Aerospace/Automotive: Component testing, material treatment. • Electronics: Manufacturing and testing. • Materials Science: Cryogenic milling and processing. • Research & Development: Any application requiring precise thermal cycling. We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland. Cgedpfewt A Eiox Aa Eop

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Atlas Copco FX13 compressed air dryer, 10.02 m³/min Csdpoyrdifofx Aa Ejgp

Condition: excellent (used), Trane Model: CGAM046E1C02B4D102A102AXXB1B2E1AXA5AXA1A Trane CGAM 046 – Air-Cooled Scroll Chiller 126 kW – 400V For sale is a compact air-cooled chiller Trane CGAM 046. This unit is suitable for comfort air conditioning as well as commercial and industrial process cooling. What does the unit do? The chiller produces chilled water for supplying: - Air conditioning systems in office and commercial buildings - Production and machinery cooling - Industrial and workshop cooling processes - Server and technical rooms The heat is dissipated directly to the ambient air via integrated axial fans. Equipped with scroll compressors, the unit delivers reliable, robust performance with excellent part-load efficiency. Ideal for outdoor installation. Technical data: Model: Trane CGAM 046 Version: Standard Efficiency Compact Cgsdpfoynf Insx Aa Esp Cooling capacity (net): approx. 126.6 kW Power consumption: approx. 45.2 kW EER: 2.8 ESEER: 3.4 Number of refrigeration circuits: 2 Number of compressors: 4 scroll compressors Electrical data: Power supply: 400 V / 3 Ph / 50 Hz Max. current draw: approx. 105.5 A Starting current: approx. 238 A Noise data Sound power: 92 dB(A) Sound pressure at 10 m: approx. 59 dB(A) Dimensions & weight: Length: approx. 2,905 mm Width: approx. 2,266 mm Height: approx. 2,150 mm Operating weight: approx. 1,526 kg Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) For further questions, please do not hesitate to contact us by phone.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 18.60 m3/min Cgjdpsym Ub Uefx Aa Esp Year of manufacture: 2011

Year of construction: 2008, condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, total length: 2,200 mm, total height: 1,500 mm, overpressure (max.): 10 bar, rotational speed (max.): 4,860 rpm, machine/vehicle number: 28838, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to prompt collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Cgjdpfx Aeym Rwfea Eop The system consists of a screw compressor and a refrigerated dryer. TECHNICAL DETAILS Motor pressure: 22 bar Overpressure: 10 bar Speed: 4,860 rpm Volume flow: 3.02 m³/min MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 860 x 1,500 mm Weight: 400 kg External reference: Pieper - Lot 56

Condition: good (used), Year of construction: 1999, Refrigeration Dryer Manufacturer: KAESER Model: TE 121 Year of manufacture: 1999 Rated motor power: 2.1 kW Maintenance carried out by Kaeser. Codpfxsttwzbe Aa Esgp

Condition: used, functionality: fully functional, W-KRONEN HP10 LT500 Compressed Air Compressor with integrated Aerotec compressed air refrigeration dryer Aerodry PRO 1000 The W-Kronen HP10 LT500 is a powerful and reliable air compressor designed for demanding applications in trade, industry, and workshops. Combined with the integrated refrigeration dryer, this system provides a compact, efficient, and ready-to-use all-in-one solution for generating high-quality compressed air. Technical data: - Tank capacity: 500 l - Max. pressure (bar): 10 - Intake capacity (l/min): 1100 - Effective delivery (l/min): 950 - Speed (rpm): 1200 - Sound pressure level LWA/dB: 97/78 - Motor output (kW/hp): 7.5 / 10 Cgodpfx Aox I D H Rsa Ejp - Voltage/Hz: 400 / 50, 16A plug

Condition: good (used), Year of construction: 2015, MANUFACTURER: KAESER MODEL: TF174 SERIAL NO.: 1216 Cedpfxjyn Egkj Aa Esgp YEAR: 2015/08 POWER (kW): 2.52 CAPACITY (m³/min): 17 PRESSURE (bar): 16

Condition: used, Screw compressor WORTHINGTON - CREYSSENSAC Type Rollair 40 -- RLR 40BM6 Serial no. 6240330200 Year of construction 2003 Volume flow 4.6 m3/min. Pressure capacity 10 bar Cgsdpfofmim Ujx Aa Esp Motor power main motor 30 kW Mains connection 400 Volt, 50 Hz Connection thread 1 1/2 inch - 36004 Switch-on hours read - 19256 Load hours read - Soundproofed Space requirement L x W x H 1850 x 1050 x 1760 mm Weight 910 kg good condition

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" Csdpfx Aajdzqn Us Esgp - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table size: 245 x 200 mm Cjdpeh U Dtuofx Aa Esgp Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Piston Compressor KAESER Type EPC 630-250 Serial No.: 1802334 Year of manufacture: 1992 Free air delivery at 6 bar: 440 liters/min. Maximum intake capacity: 630 liters/min. Output pressure: 10 bar Tank capacity: 250 liters Motor power: 3 kW Connection: 400 Volt, 50 Hz (with 16 Amp plug) - 2-cylinder, oil-lubricated - Pressure switch set to 10 bar - Run time from 0 bar to switch-off pressure of 10 bar = 5 min Space required (L x W x H): 750 x 700 x 1750 mm Weight: approx. 150 kg In good condition Cgodpfx Aswypqrea Eep

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Cgodpfsiyu Ifox Aa Eep Very good condition Was a reserve compressor and has only few operating hours.

Condition: new, with compressed air cleaning and frequency converter Startup with frequency converter, Pressure transmitter for demand-based control Pre-separator integrated, Automatic fire extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. So simple and so effective: OPTI JET cleaning and Csdpfx Aoxpximoa Ejgp filter bags with snap ring closure. Exceptionally economical: energy-efficient drives according to IE3 Safe in case of emergency: maintenance-friendly fire extinguishing system. Extremely quiet operation: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic modes. Countless options from machine recognition to gate actuation to frequency-controlled operation, to name just three examples. Nothing left to chance: collection container with inspection window. Practical in every detail: container fastening with ergonomically shaped clamping lever. Expandable at any time: retrofit for discharge via briquetting press or rotary valve possible. - High extraction performance - Compact footprint - 100% air recirculation without temperature loss - (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free bin changes - (Optional: safety locking system for the containers) - Freely configurable module exchange and expandable ----- Technical Data ----- Extraction nozzle diameter: 350 mm, Nominal air flow rate: 6,927 m³/h, Maximum air flow rate: 8,500 m³/h, Maximum negative pressure: 2,543 Pa, Filter surface: 73 m², Chip collection volume: 3 x 250 liters, Number of bags: 3, Motor 400 V: 11.0 kW, Dimensions (LxWxH): 3,340 x 1,058 x 2,351 mm, Sound pressure level: 71 dB(A), Weight: 999 kg, according to: GS - HO - 07

Condition: new, with compressed air cleaning and frequency inverter Start-up with frequency inverter Pressure transmitter for demand-based control Pre-separator integrated Extinguishing system integrated Efficient and economical: Large-volume compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Extremely efficient: Energy-efficient IE3-class drives. Safe in case of emergency: Service-friendly extinguishing system. Exceptionally quiet: sound-insulated air recirculation from AL-KO. All options available: PLC control for manual and automatic operation. Countless options, such as machine recognition, damper control, and frequency-controlled operation, to name just a few. No mess: Collection container with inspection viewing window. Practical down to the last detail: Container locking with ergonomically shaped clamping lever. Easy retrofitting: Can be converted for discharge via briquette press or rotary valve. - high extraction capacity - minimal space requirement - 100% air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - integrated pre-separator and expandable control system - optimal filter cleaning - minimal noise level - optional: patented fill level monitoring Cgedpfxswzyh Rj Aa Eep - service-friendly, certified fire extinguishing system - dust barrier for dust-free container change - (optional: safety interlock for containers) - modules freely configurable and expandable ----- Technical Data ----- Extraction nozzle Ø: 355 mm Nominal air flow: 7,127 m³/h Max. air flow: 10,000 m³/h Max. negative pressure: 3,347 Pa Filter area: 73 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 15.0 kW Dimensions (LxWxH): 3,320 x 1,058 x 2,361 mm Sound pressure level: 73 dB(A) Weight: 1,064 kg according to: GS - HO - 07

Condition: new, Integrated pre-separator Integrated automatic extinguishing system Efficient and economical: large-volume compressed air tank with with fast-switching diaphragm valves for effective OPTI JET filter cleaning and minimum compressed air consumption. So simple and so effective: OPTI JET cleaning and bag filter with bag filter with snap ring lock. Extremely economical: Energy-efficient drives in accordance with IE3 Safe in the event of an emergency: Maintenance-friendly automatic extinguishing system. Peace and quiet: the soundproofed air recirculation system from AL-KO. All options are open: PLC control for manual and automatic automatic operation. Countless options from machine detection to slide control to frequency-controlled operation operation, to name just three examples. Nothing goes wrong: Collecting container with inspection window. Practical down to the last detail: container lock with ergonomically ergonomically shaped clamping lever. Can be retrofitted: conversion to discharge via briquetting press briquetting press or rotary feeder possible. - High suction capacity - little space requirement - 100 % air recirculation without temperature loss - (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimum filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust bulkhead for dust-free container change - (optional: safety interlocking of the containers) - Freely configurable module replacement and expansion options ----- Technical data ----- Extraction nozzle Ø: 300 mm, Nominal volume flow: 5,089 m³/h, Cedpeu R S A Rsfx Aa Esgp max. volume flow: 6,000 m³/h, max. negative pressure: 2,587 Pa, Filter area: 30 m², Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 7.5 kW, Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm, Sound pressure level: 71 dB(A), Weight: 838 kg, according to: GS - HO - 07 - new exhibition machine -

Condition: used, Year of construction: 2003, Compressed air tank made of steel (galvanized) Technical dimensions / data: Available quantity: 1 Volume: 5000 liters Type of tank: pressure tank Outer diameter: 1400 mm Cylindrical height: 2870 mm Total height: 3710 mm Type of operating pressure: overpressure Operating pressure: 11 bar Operating temperature: -10 / +50 °C Equipment: Top: 2 x crane eyes 1 x ventilation Cgodpfjv Hmd Djx Aa Eop Shell: 1 x manhole 2 x 2" socket 1 x 1 1/2" socket 2 x DN 80 flange socket Bottom: 3 x pipe feet 1 x 3/4" socket on the outlet For further equipment, see photos

Condition: used, Year of construction: 2015, machine/vehicle number: 15-1-272, Technical specifications: - Manufacturer: Weger air solutions - Year of manufacture: 2015 - Model: ZL66 - Motor output: 1.27 kW - Length: 2,900 mm - Width: 705 mm - Height: 890 mm - Duct connection: suction 605x655 mm, discharge 605x560 mm - Heating medium: hot water PWW 70/50 - Airflow: 3,000 m³/h Cjdpfx Ajykuz Aja Ejgp - Heating pipe connection diameter: DN 32 mm - Voltage: 230V - Location: in stock - Voltage fluctuation max. +/- 5%

Condition: used, Year of construction: 2013, Technical data: - Manufacturer: Berliner Luft - Year of manufacture: 2013 - Model: RXL 30 - Duct connection: Suction 875x875 mm, Discharge 875x875 mm - Airflow: 30,000 m³/h - Heating medium: Hot water PWW 90/70°C - Heat output Q: max. 344.29 kW - Medium water: 4.24 m³/h - Connection diameter heating line: 1 inch - Motor power: 15 kW - Location: in stock - Voltage fluctuations: max. +/- 5 % - Without control cabinet Cgsdpfjxgh I Hox Aa Ejp Dimensions: - Length: 5,300 mm - Width: 2,000 mm - Height: 1,755 mm

Condition: excellent (used), Year of construction: 2010, Ingersoll Rand TMS 80 Refrigerant Dryer Cgsdpoymmbtefx Aa Eep Capacity: 8.2 m3/min Year of manufacture: 2010 The dryer is fully operational.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Air conditioning unit for 330 m² workshop area / 18,000 m³/h. 100 litres of cold water are filled into the lower part of the unit, pumped upwards and then slowly flow down through honeycomb pads. The powerful fan distributes the pleasantly cool air. Cools very well even without water. Remote control and description included. Codpfsyl R Unsx Aa Eogp

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Kaeser compressor system Cgjdpovzhgiefx Aa Eop good conditon we moved to another warehouse in 2019 and didn't use the compressor in