Used Mexpol for sale (12)

Condition: new, Year of construction: 2026, travel distance X-axis: 280 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 280 mm, feed length Y-axis: 280 mm, feed length Z-axis: 400 mm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 2 m/min, nominal power (apparent): 6 kVA, torque: 57 Nm, controller manufacturer: Siemens, controller model: S828 D, workpiece length (max.): 150 mm, workpiece width (max.): 80 mm, workpiece height (max.): 180 mm, workpiece diameter (max.): 80 mm, workpiece weight (max.): 3 kg, Equipment: rotational speed infinitely variable, DANE CHARACTERISTIC table Working surface of the table 750 x 270 mm Number of T-slots in the table 3 Width of the T-slots in the table 14 mm Distance between the T-slots in the table 100 mm Maximum load of the table 100 kg Maximum travel Longitudinal axis "X" 280 mm Transverse axis "Y" 280 mm Vertical axis "Z" 400 mm Rapid traverse Longitudinal "X" 30 m/min Transverse "Y" 30 m/min Vertical "Z" 20 m/min Spindle Tool holder BT40 or SK40* Tool clamping force 8 kN Servo axis motors In longitudinal axis "X" 3.5/6 Nm In transverse axis "Y" 3.5/6 Nm In vertical axis "Z" 3.5/6 Nm Positioning accuracy of the linear axes +/- 0.005 mm Main drive motor Power S1/S6 (Siemens) 4.3/6.4 kW Maximum torque on spindle S1/S6 38/57 Nm Maximum spindle speed 8000 rpm Tool magazine Number of tools/option* 8/16* Maximum tool diameter 80 mm Maximum tool length 150 mm Maximum tool weight 3 kg Overall dimensions Length ~1360 mm Width ~2200 mm Height /maximum travel of the Z-axis/ ~2550 mm Coolant tank volume 130 l Weight ~1500 kg Standard accessories: SIEMENS CNC control system ✓ Interpolation in 3 axes ✓ Predpfx Aou Sklasdnsd Ball screw spindles, lubricated with solid lubricant ✓ Water-cooled tool cooling system ✓ 8-station tool magazine, swivel arm BT40 or SK40 ✓ Electric handwheel ✓ Telescopic guide covers ✓ Cabin to protect the work area ✓ Lighting system with lamp ✓ Graphic programming support - predefined processing cycles ✓ LCD display 8" (S808) - 10.4" (S828) ✓ Thread cutting without compensation holder (fixed) ✓ Air nozzles at the end of the spindle ✓ Spindle cooling system ✓ TRIM MicroSol 515 cooling lubricant concentrate ✓ Safety system to prevent opening: front doors of the machining area / doors of the control cabinet ✓ Air pressure sensor for detecting low pressure ✓ Electrical installation for mains supply 3x400V, 50Hz ✓ USB port on the front panel of the machine ✓ Standard paint color similar to RAL 5000 / machine base; RAL 7035 ✓ Machine status display ✓ Operating and programming instructions ✓ Special equipment and special design..: - Second 8-station tool magazine Swivel arm ISO40/BT40 - Spindle cooling 6-9 bar - RENISHAW TS 27R tool measuring unit - RENISHAW OMP40 workpiece measuring unit with cycles - Separate spindle cooling unit for machining colored materials and plastics - Handwheel on the bar (pilot) - Tool trolley - Precision clamping device - Automatically opening doors - Additional Ethernet output on the control cabinet for transferring programs between the computer and the machine - Siemens - SinuTrain software

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N Pedpju Ix Rpsfx Adnsrd feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Condition: used, bed width 220 mm Psdpfx Ajxn Tw Ajdnsrd daylight 130 mm centre height 240 mm dimensions of the machine ca. 0,5 x 0,3 x 0,15 m weight ca. 20 kg Additional lynette available upon request - Photo 2. Machine dealer with own stock of 2500 m².

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m Prodpfx Adexndahonsd

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Prjdpfsxf Ey Rsx Adned Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1991, machine/vehicle number: 20645, Offer 24309 Technical data: - Table size 710 x 315 mm Psdpfx Ajt Tad Hednord - Working range of the axes - X (longitudinal) mechanical / manual 400 / 420 mm - Z (vertical) 350 / 370 mm - Y 220 / 228 mm - Distance milling spindle - table surface 50 - 465 mm - Tool holder ISO 40 - Spindle speeds horizontal in 16 steps regul. 56 - 1800 rpm - Spindle speeds vertical in 16 steps regul. 56 - 1800 rpm - 16 feed speeds 11 - 355 mm/min - FAGOR digital display - Drive 400 V / 2.2 kW - Space requirement approx. W 1600 x H 1900 x D 1600 mm - Weight approx. 1300 kg

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 5,000 mm, turning diameter: 590 mm, spindle bore: 72 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 25 rpm, spindle motor power: 11 W, rapid traverse X-axis: 8 m/min, CNC lathe TUS 580 C New CNC-controlled machine with flat bed and Siemens Sinumerik 828D BASIC ShopTurn . Delivery date: approx. 4 months after technical and commercial agreement. Center height [mm]: 290 Swing diameter over bed [mm]: 590 Swing diameter over bed slide [mm]: 380 Center width [mm]: 1000/1500/2000/3000/4000/5000 Max. Machining length [mm]: 1250/1750/2750/3750/4750/5750 Spindle bore [mm]: 72 Spindle mount [DIN]: 55027/8 Taper in the main spindle [MK]: 8 Max. Workpiece weight: - Clamping between centers [kg]: 400 - In chuck and live center in tailstock [kg]: 600 - In chuck and steady rest [kg]: 800 - In chuck, steady rest and live center [kg]: 1300 - Flying (Lmax = 250 mm) [kg]: 150 Bed width [mm]: 400 Turning tool cross-section (HxW) [mm]: 32 x 32 Multifix system steel holder [size]: C Speeds: Total speed range [rpm]: 25 to 2000 Number of stages: 3 Gear stage I [rpm]: 25 - 100 Gear stage II [rpm]: 100 - 400 Gear stage III [rpm]: 500 - 2000 Max. Torque (spindle) [Nm]: 1200 - Gear stage I [Nm]: 1200 - Gear stage II [Nm]: 300 - Gear stage III [Nm]: 60 Travel range: Longitudinal adjustment - X axis [mm]: 290 Longitudinal adjustment - Z axis [mm]: 1000/1500/2000/3000/4000/5000 Feed range: Feed range in X/Z-axis [mm/min]: 1 - 3000 Rapid traverse speed X-axis [mm/min]: 8000 Rapid traverse speed Z-axis [mm/min]: 8000 Torque of the axis drives: X-axis [Nm]: 11 Z-axis [Nm]: 16 Feed influence [%]: 0 - 120 Tailstock: Quill diameter [mm]: 90 Quill stroke [mm]: 230 Quill taper [MK]: 5 Drives: Main motor power [kW]: 11 Cooling pump motor output [kW]: 0.09 Total output [kVA]: 15 Space requirement/weight: Length of the machine with 1000 mm center distance [mm]: 3150 Length of the machine with 1500 mm center distance [mm]: 3650 Length of the machine with 2000 mm center distance [mm]: 4150 Length of the machine with 3000 mm center distance [mm]: 4650 Length of the machine with 4000 mm center distance [mm]: 5250 Length of the machine with 5000 mm center distance [mm]: 5750 Width of the machine, depending on the equipment [mm]: 2000 Height of the machine, depending on the equipment [mm]: 2000 Machine weight at 2000 mm center distance [kg]: 3800 Additional weight for a further 1000 mm center distance [kg]: approx. 500 Standard accessories: - Electrical equipment for three-phase current 400 V / 50Hz according to VDE 0113 - Siemens SINUMERIK 828D BASIC ShopTurn - Frequency controller for main drive - SIEMENS - Illumination lamp - Quick-change steel holder head size C - Coolant system with electric pump - Locked chuck protection hood - Rear chip guard - Chip guard at the front of the top support - Operating instructions, test report - CE and declaration of conformity - Machine color (similar to RAL 7035 RAL 7011) Options: - Fixed setting vice - Three- and four-jaw chuck - Face plate - Chuck flange - Hydraulic tailstock quill - Power chuck - Turret head with turret disk - Drill stand with boring bar Podpfx Adeufgg Djnjrd - And much more

Condition: used, Year of construction: 1992, Technical details: spindle diameter: 100 mm Pjdpfx Adju Idqbsnjrd x-travel: 1500 mm y-travel: 1450 mm z-axis: 930 mm w-axis: 506 mm B-axis (table): 360 ° control for program: HdH TNC 407 tool taper: SK50 number of spindle speeds: 5 - 1.600 / stufenlos table load: 4,0 t table-size: 1100 x 1400 mm table rotating: 360 ° feed steps: X/Y/W/Z-Achse: 2 - 2000 mm/min Rapid feed X axis: X/Y/W/Z-Achse 5000 mm/min. total power requirement: 40 kW dimensions electric cabinet: 2000 x 600 x 2000 mm machine dimensions LxWxH: 4,9 x 3,7 x 3,8 m weight of the machine ca.: 14 t CNC drilling-milling machine with hydraulic power unit. Working paths from the table: X-axis table transverse 1500mm W-axis table longitudinal 1000mm 9x T-slots according to DIN 650 Equipment: measuring probe electronic handwheel hydr. weight compensation Y-axis universal milling head And some accessories, ask for them! i.D. *

Condition: good (used), Year of construction: 1989, 1 used universal tool milling machine Manufacturer: Mexpol Avia Model: D 36 Year of manufacture: 1989 Technical specifications: Pjdpewxy Apsfx Adnord Spindle mount: SK 40 X-axis travel: 600 mm Equipped with digital readout.

Condition: new, Year of construction: 2026, turning diameter over cross slide: 690 mm, spindle bore: 155 mm, turning diameter: 1,090 mm, turning diameter over bed slide: 1,000 mm, center height: 500 mm, center width: 700 mm, turning length: 6,000 mm, bed width: 700 mm, rotational speed (max.): 1,000 rpm, Equipment: rotational speed infinitely variable, Heavy-duty lathe with infinitely variable speed control in 4 ranges. Digital position indicator / digital measuring device with constant cutting speed control - High motor power of the main drive 30 kW in standard version Prjdpfsugwrgox Adnsd (applicable in the range from 5 - 1000 rpm) - Rigid main spindle with 132 mm bore - Bed width 700 mm - Prismatic guide, rigid cross slide Accuracy according to DIN 8607 - Rigid main spindle: TUS 800 /100/1250 with 155 mm spindle bore, mounted in precision bearings Manufacture: FAG or SKF Spindle holder according to DIN 55027/15 - Hardened guideways 48 +/-2 HRC - Locked chuck guard (max. TUS 800 = 760 mm, TUS 1000 = 960 mm, TUS 1250 = 960 mm) Rear, continuous chip splash guard - Moving front chip guard - Jogging gear for main spindle - Closed feed box of rigid design with sliding wheel blocks on splined shafts - Central lubrication for bed slide and facing slide - Central lubrication for headstock and feed box - Feed rates, metric and inch threads without wheel change - Rapid traverse lengthwise, crosswise and in top support - Safety shutdown of the handwheel on the bed slide or the hand crank on the cross slide during rapid traverse movement - Feed direction change on the bed slide and also on the headstock - Quick-change tool holder model D1 Scale ring on the bed slide and tailstock handwheel - Scaling on the tailstock quill 2-stage tailstock quill/ with gear ratio 1:1 and 1:4 - Electrically adjustable tailstock Support for lead and feed spindles from 2000 mm SW - CE and declaration of conformity

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 9022, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,450 mm, travel distance Z-axis: 930 mm, spindle diameter: 100 mm, spindle speed (max.): 1,600 rpm, travel distance W-axis: 506 mm, swivel angle B-axis (max.): 360 °, TECHNICAL DETAILS x-axis travel: 1,500 mm y-axis travel: 1,450 mm z-axis: 930 mm w-axis: 506 mm Psdpfx Adew T Sqtjnjrd B-axis (table): 360° Table size: 1,100 x 1,400 mm Table rotary: 360° Tool holder: SK 50 Spindle diameter: 100 mm Spindle speed: 5 - 1,600 rpm / stepless Feed rates (X/Y/W/Z-axis): 2 - 2,000 mm/min Rapid traverse X-axis (X/Y/W/Z-axis): 5,000 mm/min MACHINE DETAILS Table load capacity: 4.0 t Total power requirement: 40 kW Control cabinet dimensions: 2,000 x 600 x 2,000 mm Machine dimensions (LxWxH): 4.9 x 3.7 x 3.8 m Machine weight approx.: 14 t EQUIPMENT - Measuring probe - Electronic handwheel - Hydraulic weight compensation Y-axis - Universal milling head - CNC drilling and milling machine with hydraulic unit

Condition: new, Year of construction: 2026, turning diameter over cross slide: 620 mm, turning diameter: 6,000 mm, spindle bore: 103 mm, turning diameter over bed slide: 860 mm, New CNC-controlled machine with flat bed and Siemens Sinumerik 828D BASIC ShopTurn . Delivery date: approx. 4 months after technical and commercial agreement. Working range: - Center height [mm]: 330, 380, 430 Podpfjufgfyjx Adnord - Rotation diameter over bed [mm]: 660, 760, 860 - Rotation diameter over cross slide [mm]: 420, 520, 620 - Center width [mm]: 1500 to 6000 - Bed width [mm]: 560 - Spindle nose DIN 55027/11 - Spindle bore [mm]: 103 - Max. Torque (spindle) [Nm]: 2000 - Speed control: Stepless - Speed stages: mechanical 3 - Total speed range [rpm]: 9 - 1320 / 12 - 1250 - Power [kW]: TUB660C: 15 / 18.5 - Feed rates X/Z [mm/min]: 1 - 3000 - Rapid traverse X/Z [mm/min]: 8000 - Quill diameter [mm]: 105 - Inner taper of quill [MK]: 6 - Quill stroke [mm]: 225 - Workpiece weights supported with tailstock [kg]: 1500 Options: - Fixed tailstock - Three- and four-jaw chuck - Face plate - Chuck flange - Hydraulic tailstock quill - Power chuck - Turret head with turret disk - Drill rig with boring bar - And much more