Used Combination Folding Machine for sale (68,099)

Condition: new, Year of construction: 2025, CANTED BENCH TECHNOLOGY KRUSE, YOUR competent partner in the matter of ABKANTBÄNKE Up to 150km free delivery. Standard with piano inserts (segment divided upper, lower and bending beam) for a large number of bending possibilities Cassettes and special profiles with opposite bends can be easily produced with this model Swivel bending machine universally applicable for tinsmith's stores, repair stores and roofing companies Segments are individually movable as well as removable. Segmented tools on all cheeks allow large clearances for complex workpieces. Bending machine SGR 1250/1,5 Technical data: - max. working width; 1250mm Other dimensions 1000mm and 1400mm on request - segments 30,40,50,60,70,100mm - max. bending angle 160 degrees - max. sheet thickness (steel) 1,5mm Rodpencc Irefx Adasn - weight 250 kg possibility of mounting a guide rail for roller shears 300 EUR accessory roller shear (up to 0,8mm) 350 EUR All prices are subject to 19% VAT. Certificate CE Warranty: 12 months. Self collection is possible Shipping within Germany 220€

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system - Non-stop standard delivery - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm - Screw compressor Varimatrix 105-CS Rsdex R Tiaepfx Adaen Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Condition: used, The Horizon AFC-502 folding machine, serial number 23027, is a versatile solution for professional folding applications. Currently dismantled and located in Germany, it is designed to handle a wide range of formats with precision and efficiency. This model offers 2 parallel folds and 1 cross fold, supported by a suction head with rotary feeder for smooth and reliable sheet handling. It accommodates sheet widths up to 500 mm (minimum 105 mm) and lengths up to 648 mm (minimum 174 mm). Cross folding is possible from 182 mm to 500 mm, while perforation can be performed on sheets ranging from 105 mm to 500 mm in width. Performance highlights: Folding capacity: 2 parallel folds + 1 cross fold Sheet width: 105 ??? 500 mm Sheet length: 174 ??? 648 mm Redpfxjw U Dtvs Adajn Cross folding: 182 ??? 500 mm Perforation width: 105 ??? 500 mm Speed: up to 180 m/min Compact and efficient, the Horizon AFC-502 is well-suited for printshops requiring reliable folding performance across a variety of formats. Format: 500 mm Equipment: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder

Condition: used, The Horizon AFC-544 AKT is a versatile cross folder currently in operation at a printshop in Germany. Designed for sheet sizes up to 540 x 760 mm (minimum 120 x 172 mm), it combines efficiency with flexibility for a wide range of folding applications. The machine features 4 buckles with knife in the first folding unit and 2 buckles in the second unit, supported by a fully automatic knife for precise folding. Equipped with Zolltouch & work Zoll technology, it offers intuitive operation and includes 17 standard folding types preprogrammed, along with memory capacity for 200 repeat jobs. Capable of handling paper weights from 40 to 250 g/qm2, it delivers a maximum speed of 40,000 cycles per hour. Additional specifications include: Fold length: minimum 58 mm (1st buckle), 35 mm (other buckles) Pile height: 650 mm Power: 400V / 50Hz ??? 2.5 kW Dimensions: 2,700 x 1,050 x 1,650 mm Weight: 1,050 kg (without conveyor) Rjdpfx Asw Upqmedasn This machine offers a compact, high-performance solution for professional folding needs, combining automation, memory functions, and robust engineering. Format: 540 x 760 mm Equipment: 4-buckles cross folder Parallel fold Crossfold Technology: touch & work Memory folding types: 17 standard-typs of fold preprogrammed - Saveable jobs: 200 memories for repeat orders 1.folding unit: 4 buckles + knife 2.folding unit: 2 buckles Knife: full automatic Sheet size:max. 540x760mm; min. 120x172mm - Fold length:1. buckle: min. 58mm all other buckles: min. 35mm Paper weight: 40-250g/sqm Pile height: 650mm Speed: max. 40.000 cycles/h Power: 400V/50Hz - 2,5kW Dimensions: 2.700x1.050x1.650mm Weight: 1.050kg (without conveyor)

Condition: good (used), Lid folding machine, folding machine, folding machine, lid folding machine, can folding machine, can folding machine -Lid seaming machine for sheet metal buckets -The machine creates the fold for the lid -Dimensions: 1000/1200/H1150 mm Redpfx Asb A H R Ejdasn -Weight: approx. 800 kg

Condition: used, Year of construction: 2001, The Mathias Baeuerle CAS 52-B is a sophisticated and efficient folding machine designed for precise and automated folding tasks. Manufactured in 2001, this machine is currently in stock and located in Germany. It features four plates in the first unit and automatic fold plate setting, ensuring accurate and consistent folding. The CAS 52-B is equipped with automatic paper thickness measurement, a control panel with seven pre-programmed standard folds, and electrical double-sheet control to prevent errors. It includes a flat pile feeder for smooth material handling and a MB CAS 52 Multimaster computer-controlled folder, which allows for precise and repeatable folding operations. With a memory capacity for 60 repetitive jobs, the machine can efficiently handle high-volume tasks. The CAS 52-B also features semi-automatic fold roller setting and mobile delivery, enhancing its versatility and ease of use. It can accommodate materials with a size of 520 x 850 mm. Rsdpfx Aswdww Uodaen Format: 520 x 850 mm Equipment: 4 Plates 1st Unit Automatic Fold Plate Setting Automatic Paper Thickness Measurement Control Panel 7 Pre-programmed Standard Folds Electrical double-sheet- control Flat pile feeder MB CAS 52 Multimaster Computer Controlled Folder Memory for 60 Repetitive Jobs Mobile delivery Semi Automatic Fold Roller Setting

Condition: used, Year of construction: 2006, The Heidelberg Stahlfolder Ti 40/4-SAK is a compact and efficient folding machine designed for small to medium-sized print shops. It has 4 pockets and an SAK stream delivery system Format: 400 x 650 mm Equipment: Feeder Feeder Mode: Flat pile feeder Type: FI-40 Control Unit: DCT 500 Folding Units Rsdpfxewcqxve Adaen 1st unit Type: Ti-40 Year: 2004 Pockets: 4 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Noise Protection Hood Serial number: F-00226 Delivery Delivery mode: Shingle delivery Technical Details Sheet size max: 400 x 650 mm Sheet size min: 80 x 100 mm Max. mechanical speed: 180 m/min.

Condition: used, Year of construction: 2010, The Horizon AFC 566 FKT + PST-40 folding machine, manufactured in 2016, is a high-performance solution for efficient and precise folding operations. Currently in production and located in Germany, this machine is designed to handle a wide range of sheet sizes, from a minimum of 60 x 64 mm to a maximum of 558 x 850 mm, with a maximum mechanical speed of 240 m/min (30,000 cycles/h). Equipped with a flat pile feeder capable of handling a maximum pile height of 740 mm, it ensures continuous and efficient paper feeding. The primary folding unit is an AFC-566 FKT with 6 combi folding plates, offering manual pocket and roller configuration. It features a used condition roller and a cross fold unit with 1 knife, providing versatile folding options with a maximum working width of 558 mm and a maximum fold length of 850 mm. The machine also includes a noise protection hood and touch screen control for ease of operation. The delivery mode is a PST-40 press delivery, manufactured in 2010 with the serial number 360003. It has a maximum working width of 440 mm and a pressing force of 20,000 N, ensuring efficient and organized output handling. This machine is well-suited for businesses seeking to enhance their folding capabilities with a reliable and high-performance solution. Format: 440 x 310 mm Equipment: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Redpfjwcqw Sex Adajn Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h

Condition: used, Year of construction: 1988, The Stahl T49/4.KB-F.2, manufactured in 1988, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 490 mm and is currently located in Germany, available in the Printshop. Format: 490 mm Rsdpfov Di Sxsx Adasn Equipment: 4 buckle plates 1 Knife vertical pile feeder

Condition: used, Year of construction: 1994, The Mathias Baeuerle CAS 524 SE, manufactured in 1994, is a machine equipped with four pockets and a flat stack feeder. It features a single cross-cutting unit, enhancing its functionality. This model has a format of 520 x 720 mm and is currently located in Germany, available in storage. Format: 520 x 720 mm Rjdsv Di Sropfx Adaen Equipment: 4 buckle plates vertical pile feeder 1 Knife

Condition: as good as new (ex-display), Various bending tools for a motorized folding machine RAFAMET / OZAMECH KM 4-2000: Bending rails for the upper beam: available immediately, subject to prior sale: - KTS-20° *), Price: €485.00 net - KRN-5 *), R=5 mm, Price: €455.00 net - KRP-22.5, R=22.5 mm, Price: €495.00 net - KHT-175/30° *), H=175 mm, a=30°, Price: €1,495.00 net - Bending rails for the upper beam with delivery time: approx. 6-8 weeks after order receipt - Standard upper bar 45°, R = 1 mm, Price: €1,695.00 net Rails for the bending beam: available immediately, subject to prior sale: Redpfx Adobdf Ipsaen - Narrow bending rail for the bending beam, 20 mm, Price: €480.00 net *) These bending rails operate over 90°. Therefore, use only in conjunction with the narrow bending rail! Other bending tools for other machine sizes KM 6/2000, KM 4/3000, etc.: on request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Redpox Nc Atjfx Adasn Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: good (used), Mobile delivery for folding machine Heidelberg SAK-66 Fully operational, ready for production. Rsdpfxox Ncwks Adajn Manufactured in Heidelberg, Germany. Brand new belts. Can be connected to any Heidelberg folding machine, with smooth delivery speed adjustment. Height and angle adjustment.

Condition: good (used), GUK ZK-500 Mobile Folding Machine Redjx Ncvtjpfx Adaon Manufactured by GUK, Germany. The machine is in perfect, like-new condition. All belts are new. Can be connected to any GUK folding machine. The device also operates independently of the folding machine. Flexible speed control.

Condition: good (used), Year of construction: 2006, functionality: fully functional, A cardboard box folding machine is for sale. Fully functional, fully automatic, adjustable to different sizes Cardboard boxes are not supplied Simens control Currently set box size: 240*230*200 mm On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Redpfx Adetyai Roaen Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Fzho0bc Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: new, Sturdy cast steel construction High-precision sizing slide made of anodized aluminium with a travel of 2250 mm Maximum saw blade diameter of 315 mm possible, saw blade can be tilted 45 Large trimming frame (960 x 600 mm) with telescopic aluminum fence that can be extended up to 2660 mm Heavily ribbed dressing work tables made of gray cast iron, re-annealed and stress-free for decades of stability and flatness Helical toothed steel feed roller for even material feed Three milling speeds, manually adjustable Milling spindle with right/left rotation Three independent industrial motors With lockable main switch, motor protection switch, emergency stop switch Dressing table width 410 mm Dressing table length 1810 mm Chip removal max. 4 mm Thicknessing table length 605 mm Thicknessing table width 410 mm Working height min. 3 mm Working height max. 230 mm Feed speed 7 m/min Chip removal max. 4 mm Suction nozzle diameter 4 x 120 mm Planer cutterblock type TERSA (3 pcs.) Redpfoiiynnsx Adaen Planer shaft diameter 72 mm Speed 5200 min-¹ Circular saw Edging length 2250 mm Cutting width with rip fence 900 mm Max. Cutting width to the left of the saw blade 2310 mm Saw blade inclination 90 - 45 ° Max. Cutting height at 90° 90 mm Max. Cutting height at 45° 63 mm Saw blade diameter 315 mm Saw blade speed 4000 min-¹ Sliding carriage and table Length of sliding table 2600 mm Spindle diameter 30 mm Speeds 3500/7000/ 10000 min-¹ Milling tool diameter max. lowerable/ not lowerable 180/ 210 mm Power drive motor 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx. 560 kg INCLUDING OPTIONS - Handwheel with gravitational-numerical display for thicknessing table positioning - Sliding carriage length 2600 mm - Professional stops - "TERSA" planer cutterhead - Right-left rotation of the cutter

Condition: used, Dough rolling and shaping machine, combination rolling machine, rolling machine -Roll width: approx. 600 mm -Rolling thickness: from 0.3 - 30 mm -with round and long wire type: SR0 -flour container -16 A-CEE plug -Connection: 380 V, 0.75 kW -The rolling machine is mobile -Dimensions: 1900/1250/H1900 mm -Weight: 430 kg Rsdpfeb A Iciex Adaon

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Redpfxoxlt Shj Adaon Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: used, Year of construction: 2020, functionality: fully functional, Equipped with Robatech gluing system Rsdpfxox Rc Ryj Adaen

Condition: ready for operation (used), Year of construction: 2002, sheet width 3220 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 1.0 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm bending speed ca. 120 Grad/sec back stop - adjustable 10.0 - 1.000 mm Rodpfx Adsxr Rbaoaen adjustment speed 300 mm/sec work height max. 869 mm control POS 2000 total power requirement 10.4 kW voltage 400 V weight 3750 kg range L-W-H 4550 x 2550 x 1600 mm current list price ~ 150.000 Euro with excellent features (!!) - in checked conditions - machinevideo - ?v=VNHsE2tbScA Features: - CNC electromotive universal swing bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-resistant welded construction - Rotating upper beam / as an automatic tool changing system * With 2 tool stations (sharp and goosefoot bending rails) * Reduces setup and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model "POS 2000" * Control panel front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control panel, front right - Servo-inverter-controlled drives * For bending/upper jaw & electric backgauge - CNC electro-motorized lower jaw adjustment - CNC electro-motorized backgauge * Travel speed 300 mm/sec. * With rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions Optional accessories included: - 1x 30° upper tool sharpening rail - 1x split set of upper tool gouge rail - 2x bending rails

Condition: good (used), Year of construction: 1991, 4-pocket folding machine with flat pile feeder including knife folding unit. Redpfx Ajx H Sr Ejdasn New folding rollers in the main folding section! Maximum format: 460x650mm Electrical connection: 400V/50Hz Weight: 700kg

Condition: ready for operation (used), Year of construction: 2000, sheet width 2520 mm plate thickness 4.0 mm ST thickness at "Niro-steel" 2.0 mm Rsdpfx Aex H Alcjdaon upper clamping bar adjustment 250 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm work height max. 869 mm control POS 2000 voltage 400 V total power requirement 6.0 kW weight 4100 kg range L-W-H 4120 x 2400 x 2090 mm current list price ~ 90.000 euro from a maintenance workshop with excellent equipment (!!) new touchscreen installed in 2023 - in checked conditoins - machinevideo - ?v=5Y2NheJjdWo Features: - CNC electro-motorized universal bending machine * ??High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-resistant welded construction - SCHRÖDER CNC control model POS 2000 * Control panel front right (operable with PC mouse) * Touchscreen replaced in 2023 * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swiveling control, front right - Servo inverter-controlled drives * For bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electro-motorized Backgauge * Travel speed 300 mm/sec. * with rear sheet metal support surface - 1x freely movable double foot switch - Operating instructions (PDF) * Optional accessories included: - SCHRÖDER split gouge tools - top

Condition: good (used), functionality: fully functional, A cassette set of bending tools for FASTI MAK Rsdpfx Asx Hx S Ssdajn

Condition: excellent (used), Year of construction: 2001, Paper format: min. 10 x 16 cm // max. 35 x 50 cm Brochure format: min. 8 x 5 cm // max. 35 x 25 cm Equipment / Additional information: Page circumference 80 gr./m2 up to 100 pages Work cycles max. 4000 per hour Redpfx Adjr Ti Nboasn 4xHohner 48/5 stitching heads Easy adjustment option for head stitching Break-in sword fold with adjustable folding rollers Front cutting unit via upper and lower knives

Year of construction: 1996, condition: excellent (used), machine/vehicle number: L. 09/31, Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Rjdpfx Ajhpyr Uodasn Equipment / Additional information: With delivery A45/1A-DC Power 400V