Used Column Drilling Machine Continuous for sale (69,591)

Condition: used, drilling capacity steel/GG: 15 mm Nlodpovxpp Hsfx Af Sjg spindle taper: 1 MK arm length: 300 mm table size: 210 x 300 mm spindle sleeve stroke: 110 mm spindle turning speed range: 200 - 3000 rpm engine: 380 V, 1,1 kW space needed: 850 x 420 x 1860 mm weight: 220 kg

Condition: good (used), functionality: fully functional, rotational speed (max.): 1,400 rpm, rotational speed (min.): 32 rpm, throat depth: 355 mm, overall weight: 1,700 kg, drilling capacity: 50 mm, For sale: 1 used pillar drilling machine Manufacturer: WMW Saalfeld Type: BK50 AI Drilling capacity in steel: 50mm Nljdpfx Afsvytw Do Seg Thrust: 355mm Spindle mount: MK5 Speed: 32 - 1,400 rpm Table size: 770 x 640mm Clamping surface: 630 x 550mm Base plate: 490 x 530mm Machine weight: 1.7t The machine can be viewed in our warehouse in 09599 Freiberg.

Condition: like new (used), The machine is completely overhauled and therefore as good as new! Nodjfgwlbjpfx Af Selg Technical specifications Drilling method : single-lip drilling Number of spindles 1 Drilling range in steel D= 1-6 mm Drilling depth 420 mm Max. workpiece length 420 mm Manufacturer: TBT / SFT New electrics and new controls!

Year of construction: 1970, condition: good (used), machine/vehicle number: Unbekannt, OFFER Technical data: - Drilling capacity in steel ST 60: 28 mm - Drilling capacity in steel ST 60: 32 mm Nledshglvkopfx Af Sjg - Drill spindle mount: MK 3, long spindle - Drill spindle stroke: 180 mm - Drill spindle speeds, stepless: approx. 140 - 1600 rpm - 3 feed rates: 0.1; 0.2; 0.3 mm/rev - Overhang: 290 mm - Max. distance, table to drill spindle: 620 mm - Rotary table with 2 T-slots: 450 mm - Height adjustable via rack and pinion with hand crank - Coolant system - Drive: 380 V / 0.9 / 1.3 kW - Space requirement: approx. W 750 x H 1900 x D 700 mm - Weight: approx. 280 kg

Condition: used, Used pillar drilling machine from Ixion Nledpfxohcr I Eo Af Sjg Speed range: 400-3000 RPM MK2 chuck Drilling capacity up to max. 18mm

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Nsdpfeqa Txqex Af Sslg Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm Nedpfowncaiex Af Selg - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 1997, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 415 x 350 mm turning speeds 160 - 2.250 U/min column diameter 115 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1920 mm Features: Nedpfx Afszl E T Re Selg - Heavy-duty column drill press - Continuously variable speed control (V-belt) - Pole-changing motor - Fixed drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - User manual (PDF)

Condition: excellent (used), Year of construction: 1976, ALZMETALL AB 3ES Pillar Drill Drilling capacity in steel St 60 28 mm Drilling capacity in cast iron GG 20 35 mm Drilling capacity in St 60 35 mm Spindle mount MT 3 Throat 290 mm Quill stroke 160 mm Table stroke 592 mm Column diameter 115 mm Clamping area 510 x 300 mm Nodpfx Ajwg Hdvof Sjlg Spindle speed 130-1750 rpm Machine weight approx. 400 kg Year of manufacture 1976 With coolant system!

Condition: new, Year of construction: 2026, Power: 1.1 kW Drilling capacity in steel / continuous drilling capacity: 30 mm / 25 mm diameter Speed range: continuously variable, 120 - 3000 min⁻¹ Spindle mount: MK-4 Nsdpfx Aezhm D Asf Selg Drilling stroke: 120 mm Spindle overhang: 254 mm Table size: 475 mm x 425 mm Tilting/rotating of the drilling table: 45° to the left / 360° Column diameter: 80 mm Quick-change toolholder: 1 - 16 mm Weight: 132 kg

Condition: new, Year of construction: 2024, ALZMETALL pillar drilling machine AB 34 iTRONIC, drilling capacity in steel 34mm, spindle speeds: 100-1800 rpm, short spindle MK4, spindle stroke: 160mm, overhang: 300mm, column diameter: 145mm, machine table usable support area: 615x430mm, with T-slots 2 x 14mm x 224mm, spindle-table distance min./max. 138/688mm, machine table height adjustment via hand crank, feeds 0.1-0.2-0.3-0.4 mm/rev, machine height without options: 1865mm, net weight: 470 kg. Standard equipment: 7" TFT-LCD display with touch function Threading device Infinitely adjustable speed Spindle guard Three separate buttons for right-hand rotation – left-hand rotation – stop Mushroom button Main switch Right and left rotation Control voltage 24 volts Protection class IP 54 Nljdpfx Ajiqyixjf Sog Motor insulation class "F" (155°) Electromagnetic feed overload protection Initial filling of machine oil Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black including the following options: LED machine lamp, item no. 12 Coolant system A, item no. 24 Foot switch for threading, item no. 20.5 Delivery time: ex stock Waiblingen Beinstein The machine can be inspected by appointment.

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Njdpfxsxwaz Ho Af Sjlg

Condition: new, Year of construction: 2026, Continuous/Normal drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (dependent on pitch) M12 Spindle MK II Spindle speed (stepless): 40-4000 rpm Drilling depth (mm) 100 Overhang (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), spacing (mm), width dimension (mm) Number 2, 125, 13/26 Speed display Digital Drilling depth display Digital Drilling depth stop: quick-adjusting stop ring Feed (mm/revolution) Manual Table height adjustment with rack and pinion Motor, three-phase 400V with frequency inverter (kW) 1.5 Distance spindle/work surface (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drilling head cover with ergonomically angled front LED lighting Quick-adjusting and ergonomic drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP button Thermal overload protection Spindle stop Drill protection with electrical fuse Connection cable with CEE plug Optional accessories Drilling set 3 consisting of: - Machine vice [felix] 2.0 100 mm Nlodpfx Afsir Ir To Sog - Quick-change drill chuck 3-16 mm (accuracy 0.17 mm) - Tapered arbor MK 2 B18 and reducing sleeve MK 2 to Mk 1 €485.00 3-year warranty for single-shift operation Delivery free to your door (only Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 1970, condition: ready for operation (used), Box column drilling machine Make ALZMETALL Type:AB4 HST Year 1970 with coolant device . drilling capacity in steel max : 40 mm Nsdpfx Aemp Tp Hsf Sslg spindle mounting : MK4 spindle speed : 80-710 rpm feeds : 0.09 - 0.16 -0.28 mm/rev table size : 600X460 mm Machine is ready for use .

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Nledozza Nxepfx Af Sjg Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Spindle guard

Condition: excellent (used), Year of construction: 1955, Drilling capacity in steel St 37: Ø 65 mm Drilling capacity in cast iron: Ø 75 mm Spindle mount: MK 5 Overhang: 1250 mm Spindle stroke: 400 mm Spindle speeds: 22.4 – 1800 rpm Feed range: 0.056 – 0.56 mm/rev Column diameter: Ø 300 mm Motor power, 2-stage: 3.6 / 4.8 kW Clamping area, base plate: 1320 x 1000 mm Dimensions L x W x H (with motor!): 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!): 2250 x 1000 x 2800 mm Weight: 5100 kg Accessories / Special features: Nljdpfx Aotwzk Dsf Ssg • Square table L x W x H 650 x 500 x 500 mm • Central clamping device • Feed mechanism • Right-left operation • Motorized vertical movement • High speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC drilling machine. Nodpfx Afoz Evfuj Solg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Well, selling due to no usage. Nsdpfx Asz Ellwsf Selg

Condition: used, Donau DR52 Drilling capacity in steel (diameter) 52 mm Arm length 1140 mm Workpiece height max. 830 mm Drilling capacity in cast iron 60 mm Taper MK 5 Table size 1100 x 620 mm Drilling spindle stroke 225 mm Spindle speed range 28 - 1400 rpm Nljdpez D U Tzofx Af Seg Feed rate 0.1 - 0.5 mm/rev Total power consumption 10.0 kW Machine weight approx. 3.5 t Machine dimensions approx. 2.4 x 1.3 x 2.61 m

Condition: excellent (used), Year of construction: 2014, Axle: 920 mm X-axis: 3000 mm Nlsdpfofmdcqox Af Sog Material thickness: 12 mm - 30 mm Feed rate: 20 m/min A-axis: 360 degrees Minimum dimensions: Plate: x = 300 mm Y = 120 mm z = 12 mm The machine is equipped with a 4-position drill chuck and a saw blade. Maximum and minimum hole diameters that can be drilled: 3 - 35 mm The saw blade runs in the X direction. Max. cutting depth with saw blade: 10 mm Motor: 0.75 HP, 400 volts Required extraction capacity: 2300 m3/h Location: available at warehouse 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 1997, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, CNC Heidenhain TNC 426 30-tool changer SA 50 spindle with automatic tool changer Maximum spindle speed: 3000 RPM Table size: 6000 x 1100 mm Travel: 4500 x 1200 x 1000 mm Chip conveyor Nlsdpfxezh U Hfs Af Ssg 4th axis Tooling

Condition: new, Column drilling machine Manufacturer: MAXION Model: UNIMAX 3 TAP Condition: New machine Spindle speed (continuously variable): Range A: 80 - 1,440 rpm Range B: 180 - 3,200 rpm Normal drilling capacity: 30 mm Standard equipment: - Continuously variable speed control - Digital display for speed Nodpfxjd Hrhvs Af Sslg - Digital display for drilling depth - Thread cutting device - LED machine light - Automatic tool ejector - Operating manual

Condition: new, Bernardo Gear-Driven Bench Drill Press GHD 28 SV with Digital Depth Display Technical Specifications Drilling capacity max. 28 mm Thread cutting max. M12 Quick-change drill chuck 1 – 16 mm / B 16 Morse taper MK 3 Spindle speed (8) 75 – 3010 rpm Feed rate 0.004 / 0.006 / 0.009 / 0.012 / 0.10 / 0.15 / 0.30 mm/rev Arm reach 320 mm Distance spindle / table max. 810 mm Distance spindle / base plate 1230 mm Quill stroke 150 mm Column diameter 105 mm Working area base plate 325 x 360 mm Nledpfjd Err Ujx Af Ssg Table size / T-slot size 500 x 350 mm / 14 mm Motor output S1 100% 0.90 / 1.2 kW (400 V) Motor input S6 40% 1.35 / 1.7 kW (400 V) Machine dimensions (W x D x H) 600 x 700 x 1900 mm Weight approx. 290 kg Features • Digital quill stroke display for comfortable operation • Standard with automatic quill feed (0.04 – 0.3 mm/rev) • Helical gear for optimal power transmission • High efficiency and smooth operation due to helical gears in combination with steel and reinforced fiber material • Automatic quill feed is deactivated when the set drilling depth is reached • Direction switch for clockwise and counterclockwise rotation for thread cutting • Stable and ground steel column, designed for high loads • 8 switchable speeds through powerful 2-stage drive motor Scope of delivery • Quick-change drill chuck 1 – 16 mm / B 16 • Drill chuck arbor MK 3 / B 16 • Reducing sleeve MK 3 / 2, MK 3 / 1 • Digital depth display • Automatic tool ejector • Right/left hand operation • Height-adjustable protective cover

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm Nlodpfx Aferz Nqas Seg spindle taper: 3 MK arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm spindle turning speed range: 100 - 1180 rpm carriages: 0,1/0,6/0,25 mm engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm weight: 280 kg

Condition: new, Year of construction: 2026, Threading device Quick-release threading device Programmable drilling depth stop Drilling depth and speed display - digital Threading device M30 (dependent on pitch) Opt. R1: Spindle speeds with gearbox, continuously variable, speed range 100-2000 rpm Opt. R2: Spindle speeds with gearbox, continuously variable, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Overhang 300 mm Usable table area (swiveling) 590 x 450 mm Feed rate 0-300 mm/min, continuously variable Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor - three-phase 400 V, pole-changing 1.5/3.0 kW Nljdpfxjd H Rh Rs Af Seg Weight 420 kg Option: Drilling kit No. 6: Tapered arbor B18/MK 4, quick-change drill chuck B18/3-16 mm, machine vise No. 2-140 and T-slot screws, EUR 910.00 Option: Automatic spindle stop when drilling spindle is at the top, EUR 432.00 Option: Chip breaker module, EUR 432.00 Delivery: Free to your doorstep including packaging (only Germany) Warranty: 3 years NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FLOTT SUPPORT PARTNER