Used Color Mist for sale (8,507)

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, year of last overhaul: 2026, warranty duration: 12 months, Useful printing format: 70x100 Dsdpfx As Afuxmeiiskw 2 colors 4 printing plates Included sheets: 40x100 Diameter: 3.60 meters

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200912, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) Dedpfx Aioyap Shoijkw MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Year of construction: 2008, condition: used, functionality: fully functional, suction capacity: 4,000 m³/h, Oil mist extraction unit for CNC machines, ScandMist MA 400D filter separator. Fan with a power of 7.5 kW. Inlet diameter: 315 mm. Capacity: 4000 m3/h. The unit is equipped with a frequency converter. Several units of this device are available (the price stated is for 1 unit). The ScandMist filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, which results in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency and can operate continuously without interruptions. The liquid collects at the bottom of the filter and can be reused for operation. Dsdpfx Aijz R Rlveiokw These units use a 3-stage mechanical filtration process. Stock number: 1176 (3/3)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Useful printing format: 70x100. Maximum frame format: 125x102 cm. Horizontal/vertical vacuum table adjustment with millimeter precision. Non-contact adjustment at the rear (known as Sincoprint) with a knob located on the front of the machine, within easy reach of the operator. Dsdpo Ahyzaofx Aiiekw 3-position selector: manual, single, and automatic, with a timer to regulate the dwell time at the end of the printing cycle before the printing head rises. Timer for adjusting automatic operation. Dual-function foot pedal: left pedal to start the machine and right pedal to activate the sheet vacuum during registration. Squeegee and counter-squeegee speed adjustment with a potentiometer.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “HP Color LaserJet Flow E87740”. Dedpfxez Arvys Aiiekw Item for sale: 1x HP Color LaserJet Flow E87740 with the following specifications: Includes duplex ADF / R-ADF Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 2,232 pages Colour: Approx. 558 pages Black: Approx. 1,674 pages Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 400 kg, input voltage: 400 V, suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Oil mist and fume extraction unit for CNC machines, Plymovent brand separator filter. Designed for purifying air from metalworking processes involving high-viscosity, contaminated, or burnt oil, including: CNC machines for cutting, drilling, and sharpening; metal forming machines; oil mist generated by heat and surface treatment. Simple to operate and reliable filter design. Filter housing made of galvanized steel sheet coated with powder paint. The filter is equipped with a pressure gauge indicating the filling level of the filter element. Fan in a sound-absorbing housing, 4 kW (three-phase) POWER: FA-6000 Capacity up to 6000 m3/h Inlet diameter - 250 mm Dimensions: Filtration unit: 0.85m x 0.70m x h-2.41m Dods Ad Dnbepfx Aiiokw Fan: 1.20m x 1.10m x h-1.30m Stock number: 0027

Condition: used, Year of construction: 2006, The equipment detailed here is a Sakurai 566 SD, manufactured in 2006. This model has dimensions of 660 x 508 mm and has produced approximately 85 million impressions. It is currently in production and located in Germany. The Sakurai 566 SD is equipped with several advanced features, including a Streamfeeder and the Sakurai Olivermatic Alcohol Dampening System, which enhance its efficiency and print quality. It also includes a delivery system and supports CIP 3 standards. This machine boasts a maximum speed of 15,000 impressions per hour, making it a high-speed option for large-scale printing tasks. Additional features include the SIS (Sakurai Interactive System), SCC (Sakurai Color Control), QSS (Quick Standby System), and SAS (Sakurai Auto Set), all of which contribute to its advanced capabilities and ease of use. These specifications make the Sakurai 566 SD a robust and efficient choice for high-volume printing operations. Format: 660 x 508 mm Equipment: Dsdezncmmjpfx Aiiskw Streamfeeder Sakurai Olivermatic - Alcohol Dampening System delivery CIP 3 Max Speed: 15,000 iph SIS Sakurai Interactive System SCC Sakurai color control QSS quick standby system SAS Sakurai Auto Set

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 650 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,260 mm, total width: 2,370 mm, table width: 400 mm, table length: 800 mm, table load: 400 kg, overall weight: 3,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, product length (max.): 2,200 mm, number of axes: 3, This 3-axis LAGUN L650 vertical machining centre was manufactured in 2014. It features impressive travels of 650 mm in the X-axis, 510 mm in the Y-axis, and 610 mm in the Z-axis. The machine is equipped with a 16-position automatic tool changer and a powerful 7.5 kW spindle motor. If you are looking to get high-quality machining capabilities, consider the LAGUN L650 machine we have for sale. Contact us for further details. • Automatic cycles: 16-position automatic tool changer • Closure: Fully enclosed protective door with large viewing window • Chip conveyor: Installed on the right-hand side • Condition: Untouched, ready for operation • Control system includes a right-hand mounted operator panel with display, keypad, and control buttons • Screen displays coordinates and machining program data • Rear of the machine features ventilation panels and service access doors with safety and warning labels • Machine enclosure is in good condition, with no visible damage or signs of corrosion • Chip conveyor includes a chip collection bin • Chip conveyor and collection bin are clean and in good condition Dedpfx Aozk Ix Tjiijkw • Filtermist S800 oil mist extraction system mounted on top of the enclosure • Three-color stack light installed on top of the machine • Internal hydraulic and lubrication systems are clean and show minor signs of use • No visible leaks or corrosion were observed

Condition: used, Year of construction: 2016, Format: 1250 x 2500 mm Equipment: Dedeyx Hu Sopfx Aiiokw Number of ink cartridges: 8 Color channels: 8 Number of printheads: 16 Type of input current: Alternating current (AC) Total weight: 1,410 kg

Condition: used, Year of construction: 2007, Format: 450 mm Equipment: Creasing tool: A rotatable creasing bar that provides three different groove widths (1.2 mm / 1.5 mm / 1.8 mm) Perforating tool: A high-quality blade for Zollanvil perforation Zoll (e.g., for vouchers or admission tickets) Dkeds Afn H Djpfx Aiijw

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors Djdpjlthgusfx Aiijkw * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,955 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 203 mm, travel distance Y-axis: 82 mm, travel distance Z-axis: 585 mm, spindle motor power: 15,000 W, total height: 1,852 mm, total width: 1,935 mm, overall weight: 6,000 kg, bar diameter (max.): 65 mm, controller manufacturer: FANUC, controller model: 0i-TF, product length (max.): 2,716 mm, number of slots in tool magazine: 12, number of axes: 4, This 4-axis NAKAMURA-TOME AS-200L was manufactured in 2017. It features a maximum turning diameter of 320 mm and a turning length of 570 mm. The machine includes a 12-station turret and a main spindle speed of up to 4500 rpm. If you are looking to get high-quality turning capabilities, consider the NAKAMURA-TOME AS-200L horizontal turning machine we have for sale. Contact us for further details. Standard Equipment • Turret: 12-station drum turret • CNC control, 4 axes (including C-axis), Fanuc 0i-TF • Anti-collision protection system (mechanical “Airbag”) • Y-axis • 15″ LCD monitor with USB port • Live tooling – 12 positions • Automatic central lubrication system Djdpfoytqpnsx Aiiokw • Machine working area lighting • Coolant pump – 180 W • Initial coolant filling (Blaser coolant)Options included • Transformer • Luck-Beil II (NT Manual Guide – graphical interface for control) • Increased spindle bore to 71 mm (4500 rpm; A2-6) • Upgraded main spindle motor Fanuc 15 / 11 kW (258 Nm) • High-pressure coolant system with Brinkmann pump • Shut-off valve for high-pressure coolant system • Low coolant level sensor • Part ejector cylinder from sub-spindle (cylinder stroke 100 mm) • Signal tower for machine status (3 colors) • Operator shelf under control panel • Type A parts catcher (Ø71 mm / L150 mm / 3 kg) • Preparation for LNS bar feeder • Air blow through main and sub spindle • Manual tool probe (Renishaw, one arm for both spindles) • Spindle cooling system for main and sub spindle • Preparation for oil mist extraction system • There are no tools or tool holders included in the offer Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2003, Format: 750 x 600 mm (29.53 Zoll x 23 Dsdpfx Aijy Agg Aeijkw Equipment: Ryobi PCS-H Printing Control System Ryobi RPC Semiautomatic Plate Changer Ryobimatic AAC Dampening Automatic blanket cleaning device Upon request, we can send a video of all the cylinders.

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Dedpfstyqhqsx Aiiskw

Condition: used, Year of construction: 2003, The Manroland Roland 504-L is a high-performance four-color sheetfed offset press, manufactured in 2003 and currently operational in a printshop in Germany. With a 520 x 740 mm format and 170 million impressions, this press is built for demanding, high-volume production environments. The Roland 504-L is equipped with coating units for added versatility, and features semi-automatic plate change (PPL) for quick job turnarounds. Automatic format adjustment and non-stop devices for feeder and delivery ensure seamless operation and minimal downtime. The press also includes automatic washing devices for ink rollers, blankets, and impression cylinders, simplifying maintenance and improving productivity. Advanced features such as inking unit temperature control (Tempcontrol NT3), a powder device (Hitronic-S Grafix), and a dampening solution cooling unit (Technotrans) guarantee consistent print quality and optimal operating conditions. The integrated Grafix IR dryer further enhances drying efficiency, making this press a comprehensive solution for high-quality, high-speed printing. Format: 530 x 740 mm Min. Size: 260 x 400 mm Max. Size: 530 x 740 mm Min. Paper Thickness: 0.04 mm to 1.0 mm Max. Paper Thickness: 0.04 mm to 1.0 mm Speed: 16,000 sheets per hour Net Weight: 24000 kg Dkedpfxjxnbiao Aiijw Equipment: 4 Colors Offset press with Coater RCI with CCI Color Pilot Press Pilot Roland Matic Delta Dampening with Technotrans Impression Cylinders, Blankets and Rollers Washers PPL Auto. Plate Loading Inking unit temperature control (Tempcontrol NT3) Powder device (Hitronic-S Grafix) Coating Unit with Extended Delivery Air Glide Grafix IR dryer

Condition: used, Year of construction: 1999, Format: 520 x 375 mm Equipment: Min. sheet size 100 x 150 mm Max. printing area 505 x 350 mm Up to 13,000 (in some cases up to 15,000) sheets per hour Paper thickness 0.04 to 0.4 mm (maximum 0.5 mm) Plate size 510 x 400 mm (or 510 x 430 mm) Machine weight approx. 7,000 kg PCS-H control system Ryobimatic dampening system Dsdpfx Aiszi D Insiskw SAPC (Semi-Automatic Plate Change) Automation: Typically equipped with an automatic blanket and roller washing system. Delivery Techtrans New

Condition: used, Year of construction: 2004, Format: 0x0 Dksdpfx Aiox N I Uboiew Equipment: Semi-automatic and automatic foil packaging machines Minipack Sealbag sealing machine For packaging printed materials such as magazines, booklets, and other printed materials Easy to operate and adjus

Condition: good (used), Year of construction: 1989, functionality: fully functional, Machine in good condition to be used, ready to work. We are a printing company, we aren't machine dealers. Video of the machine in operation available. Dkedpfexqfgzox Aiiew THE PRICE IS NOT NEGOTIABLE. THIS IS THE PRICE OF THE MACHINE INSIDE OUR WORKSHOP. THE PRICE MACHINE THE PRICE DOES NOT INCLUDES DISASSEMBLE, TRANSPORTATION, OR TAXES. If you want a specialized mechanic to disassemble the machine and put it inside a container for you, it would incur an EXTRA COST of 3000€. WHEN CONTACTING US, PLEASE PROVIDE US WITH A PHONE NUMBER WITH WHATSAPP, REMEMBER TO INCLUDE THE PREFIX OF YOUR COUNTRY.

Condition: ready for operation (used), functionality: fully functional, That’s a good position. Dkedpfx Asy Siq Aoiijw

Condition: used, 1 Color Sheet-Fed Offset Press HAMADA 500 CDA 1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press HAMADA 500 CDA Serial-No. HR-6462 Dsdpj Agp A Eefx Aiiokw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2000, Format: 0x0 Equipment: Automated Plate Change (S-APC) Olivermatic dampening system Washing systems: Automatic blanket and ink roller washing systems Stop action: Electronic stop action Djdpfs Adtmtsx Aiiskw perfecting 2/0 - 1/1

Condition: used, Year of construction: 2006, Format: 375 x 520 mm Printing Area: 365 x 505 mm (14.37 x 19. Min. Size: 375 x 520 mm (14.76 x 20. Max. Size: 100 x 150 mm (3.94 x 5.91 Min. Paper Thickness: 0.04 to 0.6 mm (0.00 Max. Paper Thickness: 0.04 to 0.6 mm (0.00 Speed: Up to 15,000 sheets per Power: 16 kw Net Weight: Approx. 7,000 to 8,400 kg Measurements: L 4,545 mm W: 2,240 mm H Equipment: RYOBI PCS-H Printing control system RYOBI PDS-E Printing Density Control System High pile delivery RYOBI-matic continuous dampening system Technotrans cooling and circulation device Automatic ink rollers, blanket, impression washing Semi-RPC: Semiautomatic plate changer Powder spray device: Grafix Digital 3000 Dkjdpfozwf Ulex Aiiew Double sheet detectors (mechanical/electronic) Electronic missing sheet detector Suction tape feeder board Plate register remote control device (vertical, la Preset functionality Stream feeder Plate punch

Condition: used, GTI Oil Mist Collector GT 10L, 1000 m³/h, Used machine Manufacturer: Glob Tec Industriemaschinen GmbH (GTI) Type / Model: GT 10L Year of manufacture: 2020 Serial Number: 20200046 Condition: Used, good condition Dimensions and capacity: * Overall dimensions: 1300 x 930 x 830 mm * Flow rate: 1000 m³/h Technical and operating parameters: * Connected load: 0.5 kW * Voltage: 200 - 277 V * Frequency: 50 / 60 Hz * Max. operating current: 2.5 A * Max. back-up fuse: 16 A Dksdpfx Aij Adrtxoijw

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. Dkedox Syghopfx Aiijw It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Condition: used, Year of construction: 2005, Mitsubishi Diamond 3000 S -5 is a printing machine manufactured by Mitsubishi in 2005, with a format of 720 x 1020 mm and a print count of 300 million. Currently in production in Turkey, it features IPC II Intelligent Press Control, high-speed separators, a refrigeration and recirculation system, Grafix Digitronic powder device, SAPC semi-automatic plate changers, non-stop feeders, cylinder washing device, automatic plate cylinder cocking, automatic blanket washing device, and Mitsubishi Delta dampening system. The delivery terms are FCA. Format: 720 x 1020 mm Equipment: Plate Cylinder Cocking blanket wash up device: autom. SAPC semi automatic plate changer Grafix Digitronic powder device wash device for impression cylinders Dsdpfsvfxnxex Aiiskw Mitsubishi Delta Dampening Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator