Used Two Colors for sale (13,143)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Dcjdpfx Ajz A Ubijilen Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Dcjdpfx Aioz Dvfxsljn Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 15630;15631, color channels: CMYK, number of print heads: 40, counter reading (black): 12,000,000, counter reading (color): 2,000,000, Equipment: auto duplex, documentation/manual, Only 2 (two) million clicks on color meter! Dedpfjz E Uqcsx Ailecn 12 Million on black meter. Excelent condition! 30 kHz printing heads, 40 printing heads, all of them in mint condition, no streaking or any demage on heads. It was under full maintenance of Canon Hungary Canon unwinder andd Hunkeler RW6 rewinder included Acelabs AceformChecker Prit Validating System on machine. Best choice for spareparts or donor.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024126, product width (max.): 650 mm, working width: 650 mm, We are offering this very well-maintained, two-color flexographic printing machine, manufactured in 2024. Machine designation: Flexographic printing machine / 2-color / for a web width of up to 650 mm Manufacturer: China Wenzhou Hongyang Machinery Co. Ltd. Dsdpfx Ajzmul Seiljcn Model: HYR-650-2 Serial number: 2024126 Year of manufacture: 12/2024 Condition: very good (used) Functionality: fully functional Dismantling and transport must be organized by the buyer at their own expense. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Hoza EMU Die-Cutting Machine This machine is ideal for die-cutting small parts from paper, rubber, or textile materials. It has a high pressing force and can be placed on any stable table. The cutting process is initiated via a two-hand safety control. Forged blades or band steel cutting dies can be used in the machine. Blade stroke: 30 mm Max. die-cutting format: 150 x 100 mm Dsdpfxjuzhmts Ailscn Weight: approx. 150 kg Color: hammer-tone blue Dimensions: 450 x 360 x 600 mm You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Dcedpfx Aieyymz Usljn Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. Dcjdpfjvlpctox Ailon The tanks are dismantled and ready for delivery.

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: 20.082, functionality: fully functional, input voltage: 400 V, total height: 1,670 mm, total length: 6,000 mm, total width: 1,410 mm, overall weight: 2,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS UNITS Number of units: 10 1. Unit: Pre-milling unit 2. Unit: Gluing unit 3. Unit: Pressure rollers 4. Unit: Trimming unit 5. Unit: Rough milling unit 6. Unit: Edge rounding unit 7. Unit: Fine milling unit 8. Unit: Edge rounding unit 9. Unit: Radius drawing unit 10. Unit: Brushing unit ELECTRICAL DATA Voltage: 400 V Power: 16.2 kW MACHINE DETAILS Year of manufacture: 2020 Color: Gray CE marking: present Serial number: 20.082 Length: 6,000 mm Width: 1,410 mm Height: 1,670 mm Weight: 2,200 kg Transport length: 6,000 mm Transport width: 1,415 mm Transport height: 1,670 mm Transport weight: 2,200 kg Transport packages: 1 Dsdoz Eawzepfx Ailocn EQUIPMENT Tools for pre-milling unit Tools for pressure rollers Tools for trimming unit Tools for rough milling unit Tools for edge rounding unit Tools for fine milling unit Tools for radius drawing unit Tools for brushing unit

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Mobile shredding plant LINDNER URRACO 4000DS (semitrailer version) Diesel engine: 350 hp Discharge height of discharge conveyor: > 4.50 m Djdpfx Ajz Hw Nqoiljcn

Condition: good (used), CMC Q Cover Two LPA2 50-70 Hard Cover Maker The machine is in very good condition and ready for production. Made in Italy. Manufacturer’s description: The machine is very easy to set up, operate, and service. It can produce over 250 covers per hour. The machine is equipped with the following components: – a hot glue application module (laminator) with a roller steam extraction bar, – an assembly table with a vacuum system, – a module for folding the veneer edges in a single pass on both sides, – pressing rollers, – a module for positioning the cardboard, Veneer types that can be used: smooth and laminated paper, photo paper, canvas, artificial and genuine leather, etc. Technical specifications: Type: Semi-automatic machine for producing hardcovers Dodpfx Aijzw Tzgjljcn Maximum cardboard format: 700 x 500 mm Maximum paper format (cover): 740 x 520 mm. Cardboard weight: 1.5-3.0 mm. Power consumption: 2 kW, Power supply: 380V. Adhesive type: hot or cold External dimensions: 140x210x125cm Weight: 490kg.

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Dcodpfx Aevwbp Asilen

Condition: used, mileage: 32 km, power: 90 kW (122.37 HP), first registration: 10/2026, fuel type: diesel, overall weight: 2,350 kg, color: white, gearing type: automatic, number of seats: 2, total length: 4,853 mm, total width: 1,855 mm, total height: 1,842 mm, loading space length: 2,001 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4514.NW26.X029767 Errors and prior sale reserved! ----SPECIAL EQUIPMENT * Trailer coupling, fixed - incl. ESP trailer stabilization and continuous power supply FURTHER EQUIPMENT * Airbag driver and passenger side * Airbag: Passenger airbag deactivation function * Alcohol interlock (preparation) * ABS with ESP, hill start assist and traction control * Exterior mirrors, electrically adjustable and heated * Exterior mirror housing in plastic * Floor covering, rubberized, front * On-board computer * Roof storage compartment, front * Roof rails, preparation kit * Diesel particulate filter (DPF) with SCR catalytic converter and AdBlue tank * Double-wing tailgate with 180° opening angle (without window) * Third brake light, rear * Deletion of load compartment floor * Power windows, front * Remote control: 2nd remote control key for central locking - instead of conventional key * Tailgate handle, in plastic * Interior lighting, front with delay circuit and two reading lights * Interior lighting, cargo area - 1 light * Air conditioning, front incl. semi-electronic recirculation control * Steering wheel: Multifunction leather steering wheel * Steering column, adjustable in height and reach * Headlamp beam adjustment * Fog lights with static cornering light * Package: Driver Assistance Package 1 Pre-Collision Assist incl. forward collision warning, pedestrian and cyclist and oncoming traffic detection - cruise control with adjustable speed limiter - traffic sign recognition system - driver drowsiness warning - lane keeping assist incl. lane departure warning - parking pilot system f. and r. - hill start assist - 10-inch touchscreen with DAB/DAB+ and navigation - 10.25-inch digital instrument panel - FordPass Connect incl. eCall emergency assistance - Android Auto, Apple CarPlay - 2 USB-C ports, front - voice control * Upholstery: Fabric * Tire pressure monitoring system * Wheels: Tire repair kit * Wheels: Steel wheels 6.5 J x 17 with 215/55 R 17 tires in 10-spoke design * Windshield washer fluid reservoir * Headlight low beam: Halogen headlights with daytime running lights * Headlight assistant with day/night sensor * Sliding door, rear, right * Side paneling, halfway up Dedpfxey R Ibds Ailecn * Power steering, electro-mechanical EPAS * Seat belts, front * Seat Package 1 - Driver's seat, 4-way manually adjustable - Passenger's seat, 2-way manually adjustable (front and back) - Airbag package, consisting of head and shoulder airbags, as well as side airbags for driver and passenger * Sun visor, driver's side - with ticket holder and mirror, illuminated * Start-stop system * Dust and pollen filter - without activated carbon filter * Socket: 12-volt connection - 1x front and 1x in the cargo area * Rear bumper - black (plastic) * Front bumper, painted in vehicle color * Daytime running lights * Partition, full, without window (plastic) * Door handles in plastic * Immobilizer, electronic * Central locking with remote control * Auxiliary heater, electric ... and more ----1st hand. German version. Errors and prior sale reserved. 2 years manufacturer's warranty from registration (can be extended on request). We will gladly accept your vehicle in part exchange. Financing/leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you! Although checks are carried out, a deviation of the vehicle from the above description cannot be ruled out, so we would like to point out that the vehicle description only serve

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION1750-840PM Baujahr: 2008 Schließkraft: 175 Tonnen Holmabstand 510 x 510 mm Einbauhöhe min. /max.: 500 - 800 mm Öffnungsweg: 450 mm Schnecken DN: 55 mm Max. Hubvolumen: 457,6 cm³ Spritzteilgewicht in PS: 455,8 g Ausstattung: Dcedpsz I Dd Dofx Ailsn 2 x Kernzug

Condition: used, Year of construction: 2012, operating hours: 2,815 h, functionality: fully functional, machine/vehicle number: 12SLT146060, overall weight: 21,000 kg, Equipment: steel tracks, Tracked diesel 2 shaft shredder in perfect working condition. Dimensions: Weight: 20 Tonne (22UST) Transport Width: 2.5m (8'3") Transport Length: 10.2m (33'6") Transport Height: 3.1m (10'5") Working Width: 2.5m (8'3") Djdpfx Asya Hmisilecn Working Length: 10.2m (33'6") Working Height: 4.2m (13'10") Applications All types of wood (railway sleepers, pallets) All plastics (including wind turbine blades) Commercial and industrial waste Construction & Demolition (C&D) Domestic and household waste Green waste (including grass, trees, stumps) Mattresses Paper and cardboard (including paper rolls) White household goods

Condition: used, Year of construction: 2006, The equipment detailed here is a Sakurai 566 SD, manufactured in 2006. This model has dimensions of 660 x 508 mm and has produced approximately 85 million impressions. It is currently in production and located in Germany. The Sakurai 566 SD is equipped with several advanced features, including a Streamfeeder and the Sakurai Olivermatic Alcohol Dampening System, which enhance its efficiency and print quality. It also includes a delivery system and supports CIP 3 standards. This machine boasts a maximum speed of 15,000 impressions per hour, making it a high-speed option for large-scale printing tasks. Additional features include the SIS (Sakurai Interactive System), SCC (Sakurai Color Control), QSS (Quick Standby System), and SAS (Sakurai Auto Set), all of which contribute to its advanced capabilities and ease of use. These specifications make the Sakurai 566 SD a robust and efficient choice for high-volume printing operations. Format: 660 x 508 mm Equipment: Streamfeeder Sakurai Olivermatic - Alcohol Dampening System delivery CIP 3 Max Speed: 15,000 iph Dcedpfx Aijzncmmeljn SIS Sakurai Interactive System SCC Sakurai color control QSS quick standby system SAS Sakurai Auto Set

Condition: excellent (used), Year of construction: 2019, 1.0 unit, two-component dispensing system with material feed and mixer. Manufacturer: KOCH - Technik Type: GK-65 / 612D / GK65 / Dedpfxjz Hn Ece Ailscn Year of manufacture: 2019

Condition: good (used), Year of construction: 2012, Colortronic Dry-Flex M400 Granulate Dryer, Plastic Dryer For sale is a used granulate dryer, type Dry-Flex M400, manufactured by Colortronic. Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (Germany) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating power: 33 kW Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granulate dryer / plastic dryer Application area: Plastic processing, injection molding, extrusion Condition: Used, functional Dsdpsxlqztefx Ailocn Buy the Colortronic Dry-Flex M400 granulate dryer and other items at a favorable price – Here you buy goods from professionals for professionals – In our SHOP you will find more attractive offers. You can find more new and used items in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 3,500 kg, type of input current: three-phase, empty load weight: 3,500 kg, working width: 1,400 mm, filling opening length: 1,400 mm, filling opening width: 700 mm, Untha 40 shredder Dcjdpszmzgpjfx Ailsn This slow-speed shredder is ideal for shredding large items such as pallets, consumer electronics, televisions, solar panels, and bumpers. Power: 2 x 18.5 kW Electrical cabinet: Siemens Chamber dimensions: 1400 x 700 mm Loading hopper included. Weight: approx. 3500 kg The machine is in perfect working order. Price available upon request. More photos and a video of the machine in operation can be provided upon request. Testing is possible. More information is available by phone.

Condition: used, Year of construction: 1999, Format: 520 x 375 mm Equipment: Min. sheet size 100 x 150 mm Max. printing area 505 x 350 mm Up to 13,000 (in some cases up to 15,000) sheets per hour Paper thickness 0.04 to 0.4 mm (maximum 0.5 mm) Plate size 510 x 400 mm (or 510 x 430 mm) Machine weight approx. 7,000 kg PCS-H control system Ryobimatic dampening system Dedpfx Aiezi D Inslscn SAPC (Semi-Automatic Plate Change) Automation: Typically equipped with an automatic blanket and roller washing system. Delivery Techtrans New

Condition: used, Year of construction: 2016, Format: 1250 x 2500 mm Dcodpfxjyx Hu Ss Ailen Equipment: Number of ink cartridges: 8 Color channels: 8 Number of printheads: 16 Type of input current: Alternating current (AC) Total weight: 1,410 kg

Year of construction: 1977, condition: good (used), machine/vehicle number: 12200, Cylinder diameter: 400 mm Cylinder length: 1000 mm Dcjdpey Ui Uysfx Ailsn Max. pressure between cylinders: 2 x 450 kN

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3CR00640, Leased Equipment – Return Inventory Model Serial No Lease End Date Line Description Final Meter Reading imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Color A3 4,211,723 imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Color A4 1,483,205 imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Mono A3 1,157 imagePRESS C10010 Bookletfinisher 3CR00640 03/31/2026 Mono A4 1,992,235 Canon imagePRESS C10010 VP 1 x Color Digital Printing System with Plockmatic BLM50 Booklet Finishing System Professional production printing solution for high-quality color and monochrome productions – including PRISMAsync workflow, high-performance paper feeder, high-capacity stacker, and extensive inline booklet finishing. System Overview Quantity 1 System Model Canon imagePRESS C10010 VP Printing Speed up to 100 pages/minute DIN A4 Printing Technology Electrographic Color Digital Printing Controller / Workflow Canon PRISMAsync Paper Feeder POD Deck-D1 Scanner Duplex Color Image Reader Unit-M2 Production Output High Capacity Stacker-H1 Booklet System Plockmatic BLM50 / BLM35 Booklet Maker with Upgrade Finishing Stapling, Folding, Front Trimming, Square Fold, Cover Feed, Rotate/Crease/Trim, Belt Stacker Color Management i1 Process Control v5.3 Printing Languages PCL6, IPDS, PDF for IPDS Equipment per System Canon imagePRESS C10010 VP Printing System • imagePRESS C10010 Series incl. Marking Engine • Fixing Station and Power Supply Unit • Operating Panel-A5 incl. Operating Panel Foot-D1 • Operator Attention Light-D1 • Canon Toner T02 – BK, C, M and Y • CABLE MAINS, C13 EUR Dedsz I El Nspfx Ailjcn PRISMAsync Print Server & Licenses • PRISMAsync for imagePRESS C10010VP-A1 • PRISMAsync Options Bundle C10010VP-A1 • PCL6 TP-J1 • IPDS-J1 and PDF for IPDS-J1 • PRISMAsync Remote Match imagePRESS C10010VP • imagePRESS C10010 License and Resale License Paper Feeder, Scanner & Production Output • POD Deck-D1 – High-performance Paper Feeder • Duplex Color Image Reader Unit-M2 incl. Reader Attachment Kit-B1 • High Capacity Stacker-H1 • DFD Interface Kit-A1 • Canon DFD Paper Path Kit 860-B1 Plockmatic Booklet Finishing System • Plockmatic BLM 35/50 • Plockmatic BLM 50 • BLM35 Booklet Maker • BLM50 Upgrade Kit • PLM Staple for BLM50 • FTR50 Trimmer Module – Front Trimming • SQF50 Square Fold Module – Spine/Square Fold Function • CF50 Cover Feeder Module – Separate Cover Feeder • RCT50 Rotate Crease Trim – Rotate, Crease, and Trim • BST 4000-1 Belt Stacker Module – Belt Stacker for finished booklets Color Management • i1 Process Control v5.3 for professional color calibration and reproducible production quality Key Selling Points Complete production line: 100-page/minute color printing system, PRISMAsync, POD Deck, duplex color scanner, high-capacity stacker, and Plockmatic BLM50 booklet system with front trimming, square fold, cover feeder, rotate/crease/trim, and belt stacker. Suitable for: professional brochure, catalog, manual, and booklet production, as well as demanding in-house and digital printing environments. Scope of Supply 1 × Canon imagePRESS C10010 VP with extensive Plockmatic Booklet Finishing System – corresponding to the configuration listed above.

Condition: good (used), functionality: fully functional, Net price: 1,100.00 EUR Gross price: 1,309.00 EUR Dedpfxez E N Dwj Ailscn You will receive a proper invoice. Internal article number: 26093 Pneumatic press Schmidt Pressing force: 32 kN Stroke: 100 mm Connection: 220 V Ram holder: D20 mm Table: 300 x 220 mm Hole in table: D50 mm Dimensions (L x W x H): 35 x 60 x 130 cm Weight: approx. 100 kg Fully functional. The pneumatic hoses should be replaced as they are partially porous. You are welcome to inspect the press while it is powered on, in our heated warehouse covering an area of over 500 m².

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Dcsdpoy Hki Ajfx Ailjn Injection pressure: 2,750 bar Injection Unit 2 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: new, Year of construction: 2026, Airflow capacity 11,300 m³/h Motor power 11 kW (15 HP), 3000 rpm Air velocity 40 m/s Dedpfx Aijz I Sc Uolecn Filter dimensions Ø160 x 940 mm Number of filters 60 pcs Filtration area 30 m² Chip collection 2x 1250-liter big-bag (total: 2500 liters) Inlet diameter Ø355 mm Dimensions 1200 x 3310 x 3560 mm Weight 820 kg Operating temperature -20°C to 40°C