Used Colchester Mastiff for sale (56)

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Godpfey Iwydsx Ab Doit MACHINE DETAILS Electrical Data Voltage: 380 V Frequency: 50 Hz Phases: 3 & N Current consumption: 10 / 16 A Motor Power Main motor power: 12.5 HP Pump motor power: 0.05 HP Total power: 12.55 HP The seller cannot guarantee the following technical data and therefore recommends an on-site inspection! Swing over bed: 535 mm Swing over cross slide: 356–370 mm Swing in gap: 815 mm Spindle bore: 90 mm Spindle nose: D1-11 Camlock Tailstock taper: Morse taper MT5 Spindle speed range: 18–1400 rpm Number of spindle speeds: 16 Motor power: approx. 9.3 kW Power supply: 3-phase

Condition: new, Year of construction: 2026, 0554 mm 370 mm 2000 mm 280 mm 104 mm Gjdpfowyd Tnsx Ab Deit 11 kW

Condition: new, Year of construction: 2026, 0554 mm 370 mm 3000 mm 280 mm 104 mm 11 kW Gisdpfxsy Erx Nj Ab Det

Condition: used, spindle bore: 90 mm, turning length: 2,000 mm, turning diameter over bed slide: 554 mm, turning diameter over top slide: 370 mm, center height: 280 mm, rotational speed (min.): 16 rpm, rotational speed (max.): 1,800 rpm, CNC Lathe Colchester Electronic Mastiff – Fanuc 20-T Manufacturer: Colchester Model: Electronic Mastiff Control: Fanuc Series 20-T Year of manufacture: unknown Technical Data (information without guarantee) Swing diameter over bed: approx. 550 mm Swing diameter over cross slide: approx. 370 mm Centre distance: approx. 1000 / 2000 mm Gijdpfsy Nl Hnjx Ab Det Spindle bore: approx. 90 mm Speed range: approx. 16 – 1800 rpm Spindle power: approx. 11 kW Feed rate range: approx. 0.01 – 500 mm/rev Condition & scope of delivery Machine in working condition (according to previous owner) Inspection by appointment Sale as seen

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys Godpfxeq N Ay Aj Ab Deit New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Guideways in good condition without scratches, not worn Gisdpfx Aoxnqzxob Dot Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)

Condition: new, Year of construction: 2026, 0460 mm 270 mm 1500 mm Godpfxswrma Uo Ab Djit 230 mm 76 mm 11 kW

Condition: new, Year of construction: 2026, 0330 mm 1000 mm 167 mm 40 mm 3000 U/min Giedjwp Tqzepfx Ab Det DIN 55029 D1-4

Condition: new, Year of construction: 2026, 0400 mm 246 mm 1250 mm Gedpfsxcyxcex Ab Dsit 195 mm 54 mm 7,5 kW

Condition: new, Year of construction: 2026, 0350 mm 196 mm Gsdpsxxb Azofx Ab Doit 0650 mm 170 mm 42 mm 7,5 kW

Condition: new, Year of construction: 2026, 0400 mm 1250 mm 200 mm 55 mm 315 mm 2700 U/min D1-6 DIN 55029 73 mm 140 mm Gedjy Nd T Tspfx Ab Deit

Condition: new, Year of construction: 2023, 0460 mm 1500 mm 230 mm 78 mm 400 mm 2200 U/min D1-8 DIN 55029 95 mm Gisdswp Th Tepfx Ab Dot 145 mm

Condition: new, Year of construction: 2025, 0330 mm 210 mm Godpewp Tfxsfx Ab Dsit 0635 mm 167 mm 40 mm 2,2 kW

Condition: new, Year of construction: 2025, 0350 mm 196 mm 0650 mm 170 mm 42 mm 7,5 kW Gijdpfx Aswp Tpkob Dot

Condition: new, Year of construction: 2026, 0330 mm 210 mm 1000 mm 167 mm 40 mm 2,2 kW Gedswp Tq Uspfx Ab Dsit

Condition: new, Year of construction: 2026, 0330 mm 210 mm 0635 mm 167 mm 40 mm 2,2 kW spindle turning speed - stepless 30-3000 U/min Godpfoyu U Drsx Ab Djit

Condition: excellent (used), Year of construction: 1997, turning diameter over cross slide: 210 mm, spindle bore: 40 mm, turning diameter: 330 mm, turning diameter over bed slide: 330 mm, turning diameter over top slide: 210 mm, Model: Student 2500 Gap Bed Lathe Swing Over Bed: 330mm Swing Over Topslide: 210mm Swing In Gap: 480mm Distance Between Centres: 1000mm Gjdpfey N Uplsx Ab Deit Spindle Speeds: 40-2500 RPM Spindle Bore: 40mm Motor: 2.2 KW Machine with: 3 Jaw Chuck Collet Chuck and Collets Digital Readout Quick Change Toolpost with Holders Dimensions: 2130 x 1020 x 1450mm High Weight: 800 KGS

Condition: excellent (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter: 350 mm, turning diameter over bed slide: 350 mm, turning diameter over top slide: 196 mm, center height: 175 mm, turning length: 650 mm, Model: Multiturn 1000 Control: Fanuc Oi-TC Year: 2007 S/No.: N91013 Swing Over Bed: 350mm Swing In Gap: 535mm Swing Over Top Slide: 196mm Gsdpjy N Uk Nofx Ab Dsit Distance Between Centres: 650mm Spindle Speeds: 1-3500 RPM (3 Ranges) Spindle Bore: 42mm Motor: 7.5 KW Machine with: 150mm 3 Jaw Chuck Duplumatic 8 Station Turret Turret Tool Holders Tail Stock Coolant Pump

Condition: good (used), Year of construction: 2008, Colchester Harrison Alpha 1400U CNC lathe Footprint: 1.7 x 3.1 m Height: Approx. 1500 mm Weight: 3200 kg Equipment: Electrically interlocked chuck guard, full safety guard, coolant tank and pump 100 l, fully extendable chip tray, machine lighting Machining length: 1250 mm Turning diameter: 400 mm Center distance: 1250 mm Spindle bore: 54 mm Turret, number of tools: 8 Tool size: Standard: 20 x 20 mm Boring bar: 32 mm Gsdpfx Abornkdys Deit No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg Godpfornkhyox Ab Dsit We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), Year of construction: 2006, operating hours: 174 h, turning length: 650 mm, turning diameter: 350 mm, spindle bore: 42 mm, spindle speed (max.): 3,500 rpm, CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Gjdpfx Aoy Nxhfsb Doit CNC FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 42 mm Rotation max: 3500 RPM Turret: 8 tools Year of construction: 2006 Working hours: 174 working hours only MACHINE IN VERY GOOD CONDITION

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 6/0049/35449, MACHINE SPECIFICATION Centre height 190mm Distance between centres 1250mm Swing over bed 387mm Swing over cross slide 241mm Spindle bore (max. Bar dia) 54mm Spindle nose mounting D1-6 Camlock Taper in spindle nose bush & tailstock barrel No. 4 Morse Giodpsy Nkwfsfx Ab Dot Width of bedways 279mm Total travel of cross slide 235mm Total travel of top slide 120mm Total travel of tailstock barrel 155mm Spindle speeds (16) 25-2000rpm Drive vee belt and clutches Spindle motor 5.6kW Whitworth threads (45) 2 -72 tpi Diametral threads (21) 8 – 44 DP Metric pitches (39) 0.2 – 14mm Module pitches (18) 0.3 – 3.5 mod Sliding feeds. Per rev. of spindle 0.0015 – 0.040” Surfacing feeds. Per rev. of spindle 0.00075 – 0.020” Machine in Metric execution Machine Equipped with Newall NMS300 2 axis DRO system 3 & 4 Jaw chucks Quick change toolpost and 3 off toolholders Lighting Coolant system Chuck guard Rear splashguard

Condition: ready for operation (used), Colchester Master 3250 Lead-/Feed-Screw Lathe | Lathe | Turning Machine Swing over bed: 350 mm Swing over cross slide: approx. 196 mm Center height: 170 mm Spindle bore: 42 mm Spindle speed: approx. 20–3250 rpm Distance between centers: 1250 mm Main motor: 7.5 kW (10 HP) Thread cutting: - Metric pitch 0.2 – 14 mm (51) - Inch thread T.P.I. 2–56 (56) - Module threads, pitch 0.2 – 3.5 (20) - Diametral pitch (D.P.) 8–56 (20) You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. Godpfx Asy Nknksb Deit For international customers, we can also provide a net invoice. A valid VAT ID number is required. Subject to prior sale. Visit our shop and check out our other listings. Brand names and trademarks mentioned are property of their respective owners and are used for identification and description purposes only. Deviations in technical data and errors in article description may occur and are subject to change.

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Giedpfey E S D Eex Ab Dst

Condition: good (used), Year of construction: 1995, Used Colchester CNC lathe Type: Tornado 100 Max turning diameter: 420 mm Gisdpfx Aoy Atq Isb Dst Max turning diameter over support: 297 mm Max working diameter: 186 mm Max turning length: 350 mm Drive power: 5.5/7.5 kW Spindle bore: 61 mm 12-position tool changer with VDI 3425/Round 30 Fanuc O-T control Year of manufacture: 1995 Incl. tool holder Excl. tools