Used Colchester Magnum 1250 for sale (61)

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 390 mm, spindle bore: 116 mm, turning diameter: 635 mm, turning diameter over bed slide: 390 mm, turning length: 2,000 mm, Used lathe in very good condition, including a 400 mm 3-jaw chuck, 1 x steady rest and a Multifix toolholder. Technical specifications: Turning length: 2000 mm Swing over bed: 630 mm Swing over cross slide: 390 mm Swing in gap: 900 mm Spindle bore diameter: 116 mm Total weight: 4230 kg Chuck mounting: D1 11 in. Camlock Rbodjx Eln Rjpfx Ahzst Morse taper: No. 6

Condition: excellent (used), Year of construction: 2009, - Digital display. - Accessories available. Tips Height 170 mm Tip width 650 mm turning diameter over the bed 350 mm over the cross slide 196 mm in the offset 535 mm Width in front of the front plate 165 mm Spindle Spindle bore 42 mm Spindle nose D1-4" Camlock Morse taper in bushing no. 3 MT Spindle speeds 3 speed ranges 0 - 3250 rpm Main motor 7.5 kW (10 HP) Bed Slide guide width 318 mm Guide type V-shaped and flat Cross slide Width and length 180 - 850 mm Travel 250 mm Top slide Width 90 mm Travel 130 mm Tool holder 20 x 20 mm Quick-action tool lock Dickson No. 2 Redpfxjtr Ud Ss Ahzjbt Tailstock Diameter of quill (nominal value) 63 mm Travel 145 mm Morse taper no. 4 M.T. Offset ±12 mm Lead screw Diameter 32 mm Thread 6 mm pitch or 4 T.P.I. Thread Metric Pitch 0.2 - 14 mm (51) Inch thread T.P.I. 2 -56 (56) Module thread pitches 0.2 - 3.5 (20) Diametrical pitch (D.P.) 8 - 56 (20) Feed rate Metric (R10 series) 0.018 - 1.2 mm/rev Inch (R10 series) 0.0007 - 0.048"/rev Face feed = approx. half of the longitudinal values Machine height Floor to spindle center 1070 mm Total length 1250 mm Machine 2500 mm Total width 1100 mm Height over all 1300 mm Cooling pump Type AQ 3MG Headstock oil pump Type Interlube three-phase 27662-131 Weight 1250 mm between tips approx. 1450 kg

Condition: excellent (used), Year of construction: 1998, travel distance X-axis: 290 mm, travel distance Z-axis: 1,920 mm, spindle motor power: 11,000 W, 3 chuck ca 400 mm Duplomatic 8 position revolver Steady rest big 400 mm Steady rets normal 300 mm Rbjdpfsyfd Hwjx Ahzjt Pinole taper: 6Mk Stroke pinole: 180mm Quill Ø: 95mm Length: 3300mm Width: 1800mm Height: 1700mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,000 h, spindle speed (max.): 2,500 rpm, overall weight: 1,800 kg, This Colchester Triumph VS 2500 was manufactured in 2015. It features a conventional pull and lead screw, infinitely variable speed adjustment, and a digital display. Key specifications include a turning diameter of 400mm, center height of 195mm, and a bed width of 1270mm. It also comes equipped with a MultiFix quick-change tool holder, maximum spindle speed of 2500rpm, and a motor power of 7.5kW. Weight is 1,800kg. Contact us for more information about this machine. • Control: Conventional with lead screw and infinitely variable speed adjustment • Readouts: Digital display for axes and digital spindle speed display • Operating hours: No counter; estimated 5,000–7,000 h • Turning diameter: 400 mm Rodpfxex D Nwdj Ahzjbt • Center height: 195 mm • Bed width: 1270 mm • Toolpost: MultiFix quick-change tool holder Additional equipment • 3x three-jaw chucks • 3 sets of claw jaws • Chuck wrench • Manual/operating instructions • Work area lamp • Digital dial indicator • 4 MultiFix tool holders • Various turning tools • Drill chuck (keyless) for tailstock • Coolant pump

Condition: good (used), turning diameter over cross slide: 267 mm, turning diameter: 432 mm, center width: 1,500 mm, 3-jaw chuck diameter 250mm tool holder device tail stock steady rest coolant device Technische Daten / technical details: Rsdpfx Ahetq Exrezjbt Spitzenweite / center to center 1500 mm Dreh-Ø über Bett / turning diameter over bed 432 mm Dreh-Ø über Schlitten / turning diameter over sledge 267 mm Dreh-Ø über Kröpfung/ turning diameter in the gap 710 mm Spindelbohrung / spindle hole 76 mm Drehzahlbereich / spindle speed 20-1600 UpM /rpm Antriebsleistung / drive capacity 9,3 kW Gewicht der Maschine ca. / weight ca. 2310 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Rbodpfx Ajv I Ddqehzst Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys Rbedsq N Ay Ajpfx Ahzjt New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Rodpfx Asnr Nl Sjhzobt Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: used, Year of construction: 1995, TORNADO 200 year of manufacture 1995 GE FANUC Series O-T control system Maximum machining diameter: 254 mm Maximum turning length: 400 mm Rbsdpfxoua Uyus Ahzet Axis travels X : 215 mm Z : 400 mm Maximum spindle speed: 3500 rpm Spindle motor power: 18.5 kW Konik Tool system : VDI 40 Tool head : 12 positions Dimensions of the machine length : 2455 mm width : 1420 mm weight : 3000 kg

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: LVM50GIRJA/02115, MACHINE SPECIFICATION Height of centres 170mm Swing over bed 350mm Swing over cross slide 196mm Swing in gap 535mm Rsdpfx Ahoycg Thszobt Width front of faceplate 165mm Bed length between centres 1250mm Spindle speeds (infinitely variable) 15-3250rpm Spindle nose mounting (Camlock) D1-4 Spindle Bore 42mm Spindle motor 7.5Kw Width over bedways 318mm Travel cross slide 250mm Travel top slide 100mm Travel tailstock barrel 145mm Taper in tailstock barrel No. 4MT Machine in Imperial execution MACHINE EQUIPPED WITH Newall DP700 2 axis DRO system 3 jaw chuck Quick change toolpost and 3 toolholders Bedstop Lighting Chuck guard Coolant system Rear splashguard

Condition: new, Year of construction: 2025, 0554 mm 370 mm 2000 mm 280 mm 104 mm 11 kW Rbodpfxsx Urtro Ahzjt

Condition: ready for operation (used), Colchester Triumph 2500 Lathe Swing over bed: 400 mm Swing over cross slide: 246 mm Distance between centres: 1270 mm Centre height: 195 mm Max. turning diameter: 585 mm Rbodjxfrgdjpfx Ahzjt Spindle motor power: max. 7.5 kW Spindle speed: max. 2,500 rpm Infinitely variable spindle speed ranges: - low: 14–300 rpm - medium: 36–830 rpm - high: 109–2,500 rpm Overall dimensions: 2,600 mm x 1,300 mm x 1,800 mm (L x W x H) Accessories: 5 Multifix tool holders Steady rest Live and dead centers Drill chuck Jaws Cabinet Coolant pump You are welcome to come and inspect the machine. We are happy to organize affordable shipping for you. You will receive a proper invoice. A net invoice can be issued for international customers with a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may be subject to deviations, and errors in the item description may occur and are reserved.

Condition: used, Year of construction: 2003, machine/vehicle number: 1527, Used lead and feed screw lathe COLCHESTER Triumph VS 2500 Centre height: 195mm Distance between centers: 650mm Spindle bore: 54mm Infinitely variable speed: 14–2500 rpm Tailstock quill: MT5, coolant system, quick thread cutting device Digital readout: FAGOR NUP 300 TS-RS 1 x RÖHM 3-jaw chuck, 5-position stop drum, spindle stop, machine lamp, 1 x PARAT 4-way turret, 4 x PARAT tool holders, live centre and quick-action drill chuck. Rsdpfsx Hrumex Ahzsbt The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Inspection of the machine is possible by appointment.

Condition: good (used), Used COLCHESTER MASTER 3250 center lathe and feed spindle lathe Rbodpfx Aheuqkf Nezet center height 170mm center distance: 650mm spindle bore: 42mm Infinitely variable speed from 15-3250 rpm 1 x SCHUNK wedge bar lathe chuck Ø160mm 1 x MULTIFIX steel holder size B with 4 inserts Machine light, chuck protection electrically fused, machine shoes 1 x rotating center point, 1 x rotating center point with pressure indicator 1 x drill chuck with tapered arbor The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Condition: excellent (used), Year of construction: 2000, Colchester Student 2500 3-axis digital readout Rsdpfx Ahjw R S Awozsbt Collet chuck setup Various accessories

Condition: good (used), COLCHESTER COMBI 4000 is a CNC turning lathe engineered for precision, high accuracy and reliability. Capacities: distance between centres 2000 mm, turning diameter over cross-slide 370 mm, swing over bed 554 mm, max turning length 2000 mm; Z travel 1920 mm, X travel 290 mm, spindle hole 104 mm, spindle nose D1-11, Camlock D1-6, tailstock Morse 6 CM, spindle stroke 178 mm Ø95 mm. Specs: 3-step speeds 16–1800 t/min, rapid traverse 10 m/min, spindle motor 11/7.5 kW, 50 Hz 3×380 V, weight ~4000 kg, overall L3300×W1800×H1700 mm. Equipment: 3‑jaw Ø400 mm and 4‑jaw Ø700 mm chucks, faceplate Ø680 mm, 90 l coolant, MULTIFIX toolholders, toolholder sets and reducing bushes, lamp, tailstock, steady, drill chuck, chuck protection. Delivers tight tolerances; ideal for automotive, aerospace, medical, watchmaking and machine tool sectors. Rjdpfjx S N Hdox Ahzjbt

Condition: excellent (used), Year of construction: 1998, Colchester Master 3250 2-axis digital readout Mitutoyo Swing over bed: 360 x 1250 mm + gap bridge Spindle speeds via 3 gearbox ranges: 20 - 3250 rpm Spindle bore: 42 mm 3-jaw chuck Röhm 200 mm Multifix B quick-change system with 4 holders Tailstock taper: MT 4 Includes live center, keyless drill chuck, coolant system, machine feet. Safety features: electrically monitored chuck guard, start-up protection, spindle brake, splash guard, emergency stop, covered leadscrew, CE compliant. Condition: very good, runs smoothly and quietly, guides in good condition, all functions operational. Viewing under power possible. Rbedpfx Aheyah Nrszet Free loaded on truck ex location: D - 88433 Schemmerhofen.

Condition: used, Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm Redpfx Aherbm T Dszebt -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm -Weight: 1327 kg

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 554 mm turning dia. over face-slide: 370 mm turning length: 1000 mm centre distance: 1100 mm control: Fanuc 210i longitudinal traverse (z-axis): 1000 mm Transversal stroke (x-axis): 290 mm revolution per minute: 16 - 1800 U/min spindle stroke: 178 mm feed:: 10 m/min. spindle passage: 104 mm spindle nose: D1 - 11 tailstock taper ISO: 6 MT spindle drive: 11/7,5 kW connection voltage: 380 V electrics - voltage/frequency: 3 Ph / 400 V / 50 Hz V/Hz total power requirement: 11 kW Weight approx.: 4,0 t dimension machine xH: 3,3 x 1,8 x 1,7 m Rodpfov Azdwjx Ahzjbt

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Rbsdpfjxnqzxex Ahzot Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Spindle speeds 20-3250 rpm Rbjdorx Rwnepfx Ahzet Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2007, Harrison V390 Gap Bed Centre Lathe (2011) Max’ Distance Between Centres 1250mm Max’ Swing Over Bed 390mm Max’ Swing In Gap 585mm Spindle Bore 54mm Spindle Speeds 25-2500 rp9023 Supplied with: Quick Change Tool Post 2 Axis DRO Redsx H Anwopfx Ahzobt 3 Jaw Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79023 Machine Serial Number: 7V0355P Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, 0350 mm Rbsdsxxb Azjpfx Ahzot 196 mm 0650 mm 170 mm 42 mm 7,5 kW

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle speed (max.): 1,800 rpm, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 4,250 kg, distance between centers: 2,032 mm, COLCHESTER COMBI K4 R/600 Cycle Lathe TECHNICAL DATA & EQUIPMENT: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1800 rpm Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle centre height from floor: 1238 mm Nominal distance between centres: 2032 mm Max. working length between centres: 2152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle nose bush: No. 5 Morse taper Spindle bearing diameter: 145 mm Spindle bore through hole: 102 mm Spindle speed range: - Low: 4.5–450 rpm - High: 18–1800 rpm Cross slide (X-axis): - Travel (programmable limit): 290 mm Saddle (Z-axis): - Travel (programmable limit): 2032 mm Tailstock: - Quill diameter x travel: 95 x 145 mm - Morse taper in quill: No. 6 MT For further technical data, see the photographed data sheet Supplied with technical documentation as shown in the photos Supplied with accessories as shown in the photos, incl. tool holder The machine will be loaded onto a truck using an overhead crane. Please ensure suitable vehicle is provided. DIMENSIONS & WEIGHT: Rbsdpfx Ahsxd D Rfezst 6000 x 1800 x 1800 mm 4300 kg COLLECTION NOTES: This item is available from October 2025. A collection appointment on a specific day from 01.10.2025 must be arranged. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: good (used), functionality: fully functional, Machine Name - Colchester Machine Model - Triumph 2000 Description - 3 Jaw Chuck Between centers : 50 inch / 1270mm Spindle speed 2000 RPM Swing over bed 15inch /380mm Spindle bore: 2 125 inch / 54 mm Diameter Quick change tool post Rbodpfeuk H Rbex Ahzet 2 axis Accurite DRO Gap bed Tailstock Coolant pump and tray