Used Coffee Partners Machine for sale (67,035)

Year of construction: 2025, condition: new, Automatic container/capsule filling and sealing machine. - Suitable for the filling of powdery products (coffee, coffee blends, chocolate, milk powder, etc.) in different sized capsule containers (e.g. Nespresso, K-Cup, Lavazza, Tassimo, Bellissimo, without filter, etc.) and subsequent sealing. Automatic dosing, filling by an auger filler. UV sterilization system, anti-static device and vacuum cleaning system for mould formats included. Automatic film feeding and double heat sealing of the capsule. - Specifications: max. speed of the machine in neutral: 90 cups/minute; filling range: 0-20g; filling accuracy: +/- 0.15g; capacity of hopper: 10L (approx. 6kg powder); power supply and consumption: 220V, 7.5kW; required compressed air and flow rate: 6-8 bar, approx. 300L/min; flow rate inert gas: approx. 200L/min; machine dimensions: L3420xW2200xH2688mm; weight: 900 kg. Specifications refer to Nespresso capsules, by use of other brands of capsules specifications may vary. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Isdpfxov Nkz Ej Ahyeih

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Ijdpfx Ahszv S Rwjyoih Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 113L160577, travel distance X-axis: 1,270 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, feed rate X-axis: 11 m/min, feed rate Y-axis: 11 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, controller manufacturer: FANUC, controller model: SERIE 31I-MODEL B, workpiece length (max.): 1,400 mm, workpiece width (max.): 700 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 1,800 kg, total height: 3,050 mm, total length: 3,700 mm, total width: 3,240 mm, table width: 1,400 mm, table length: 700 mm, table load: 1,800 kg, rotational speed (min.): 100 rpm, rotational speed (max.): 9,000 rpm, overall weight: 10,100 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 9,000 rpm, operating hours of spindle: 7,883 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 60, Equipment: documentation/manual, High-speed package, with optical scales on the X and Y axes. Iisdpfjzlpgnjx Ahyjh

Condition: used, Year of construction: 2017, machine/vehicle number: STA00197, XYZ CT52 2 Axis CNC Lathe Box Ways Slides Siemens 828D CNC Control Swing over bed 400mm Max’ machining dia. 200 mm X-axis stroke 115mm Z-axis stroke 290mm Spindle speed 5000 rev /min Spindle Bore 61mm Max’ bar work dia. 52mm 12 Station VD130 Turret Iodpfx Aszkbirshysih Tailstock stroke 90 mm Rapid traverse rate 20 m/min X & Z Axis Cutting Feed rate 10 m/min X & Z Axis Machine Weight 2500Kgs Machine Size 1700 x 1240mm Manufactured 2017 Machine supplied with: 3 Jaw Chuck Power Chuck Tool Setting Probe Parts Catcher Chip Conveyor Auto Lubrication High Intensity Machine Light Toolbox For Sale With Jet Machinery Ltd Jet Machinery Stock Number:79265 Machine Serial Number: STA00197 £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1997, Henkovac H 1000 – Industrial Vacuum Packaging & Sealing Machine (1997) The Henkovac B.V. H 1000, manufactured in 1997, is a robust industrial vacuum packaging and sealing machine designed for high-volume food processing environments. Built for reliability and durability, it is ideal for commercial kitchens, food processors, and manufacturing lines that require hygienic, efficient, and consistent vacuum packaging. Key Features: - Heavy-Duty Vacuum Packaging: Securely evacuates air from packages, extending product shelf life and maintaining quality. - Reliable Sealing: Ensures airtight seals for a variety of food products, including meats, cheeses, and prepared meals. - Industrial-Grade Construction: Designed for continuous operation in demanding food processing environments. - Versatile Application: Suitable for vacuum packaging of different types and sizes of food products. - Long-Term Reliability: Proven design ensures dependable performance even after decades of use. - User-Friendly Operation: Controls and interface designed for efficient workflow in industrial kitchens. Technical Highlights: - Manufacturer: Howden Food Equipment B.V. - Model: H 1000 - Year of Manufacture: 1997 - Machine Type: Industrial vacuum packaging and sealing machine - Applications: Food processing, commercial packaging, shelf-life extension Whether for high-volume production lines or specialized food processing tasks, the H 1000 delivers professional vacuum sealing performance, combining durability, hygiene, and reliability. More photos and full specifications: / * Manufacturer: Henkovac Isdpfx Ahoyudxxsyoih * Model: H 1000

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Iiodpfsy Ni Ivex Ahyoh Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Iiodpeydvzdjfx Ahyjh Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: excellent (used), Year of construction: 2022, 400mm swing, 220mm max diameter, 510mm cutting length, Iijdoz Hatfopfx Ahyjh Siemens 828 Control, 65mm bar capacity, 12 station turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 3 jaw chuck, low volt light, coolant, Tool setter, swarf conveyor

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Iijdjz R Iqujpfx Ahyjh Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Condition: good (used), Hang 114-30/4 Paper Drill Machine The unit is in perfect condition and 100% functional. A top-tier machine in the category of paper drills. This is a currently manufactured model, featuring the most comprehensive equipment configuration available. Equipped with two integrated frequency converters (inverters) for stepless spindle speed adjustment (260 – 1,800 rpm) and smooth table elevation. Rapid drill zeroing/alignment system. The drilling table is adjustable in all planes; the margin (backgauge) setting is controlled via dial indicators. Waste material is directed into an external container. Operated via an electric foot switch. Energy-saving standby mode. Automatic drive belt tensioning. Each drilling head features independent adjustment, allowing for the use of drills of varying lengths. Includes a cooling and lubrication system for the drills. Technical specifications: Number of drilling heads: 4 Iedjz S Un Aepfx Ahyeih Drill diameter: 3–10 mm Stack height: 65 mm Drill spacing: min. 36 mm / max. 260 mm Table dimensions: 600 x 480 mm Power supply: 400 V Weight: 400 kg The machine comes with documentation, maintenance tools, and drill bits.

Condition: good (used), Year of construction: 2013, 480mm swing over bed, 257mm Swing over the Cross-slide, 1250mm between centres, 80mm spindle bore, 25-2500rpm spindle, 7.5kW Spindle Motor, Isdezqr Hnjpfx Ahyjih coolant, Prototrak SLX Control, 3 jaw chuck, QCTP & holders, tailstock.

Condition: new, Year of construction: 2025, workpiece weight (max.): 12,000 kg, turntable diameter: 280 mm, overall weight: 120 kg, The Robotmover 20 is the ultimate solution for moving heavy loads such as industrial machinery, installations, or steel structures – 100% electric, so zero emissions and noise pollution. Work with unparalleled flexibility thanks to the wireless remote control and the ability to effortlessly change direction 360°. This compact electric mover excels at maneuvering through tight spaces, making it an indispensable tool in congested or confined environments. Thanks to the 48V-60Ah battery, the Robotmover ensures long-lasting operation, saving both time and labor. Whether you're moving equipment or heavy loads, this electric Robotmover is your reliable partner that streamlines your work and increases productivity. Flexible Operation: The wireless remote control provides infinitely variable drive with 360° direction changes. Strong Traction: The two powerful 1000W motors equipped with magnetic brakes produce a robust pulling force of 20 tons. High Load Capacity: The triple-bearing turntable effortlessly carries a maximum load of 12 tons. Long Battery Life: The 48V lithium-ion battery with a 60 Ah capacity provides 4-5 hours of use without frequent charging. Isdpfxow I Rt Nj Ahyoih Scope of supply: Robotmover 20, remote control, battery chargers Also available transport crate with garage, battery operated hydraulic jacks, fixed following rollers electric skates power skates machine mover robot mover jung lifting equipment hydraulic jacks

Condition: excellent (used), XYZ SLX 425 x 1.25m CNC Lathe Year 2016 Serial number L769 ProtoTRAK SLX Iodjz N Ambspfx Ahysih Distance between centres 1,250 mm Maximum cutting length 1,080 mm Swing over bed 480 mm Swing over cross slide 257 mm Swing in gap 700 mm Gap in front of faceplate 170 mm Cross slide travel 230 mm Spindle bore 80 mm Spindle nose D1-8 Camlock Spindle motor 7.5 kW / 10 hp Spindle speed range 25–2,500 rpm in 3 ranges Tailstock quill travel 160 mm Tailstock taper No. 5 Morse taper Tailstock quill diameter 75 mm Bed width 370 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, turning diameter over cross slide: 272 mm, turning length: 1,250 mm, turning diameter: 470 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 1,250 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 2,500 rpm, total height: 1,850 mm, total length: 2,700 mm, total width: 1,350 mm, type of input current: three-phase, overall weight: 2,300 kg, XYZ Proturn CNC/Manual Lathe Model: Proturn 410 Control: Proto Trak LX2 Swing Over Bed: 470mm Swing In Gap: 730mm Swing Over Cros Slide: 272mm Distance Between Centres: 1250mm Spindle Speeds: 50-2500 RPM Spindle Bore: 80mm Machine With: 300mm 3 Jaw Chuck Quick Change Toolpost with Holders Ijdpfszux Iyox Ahyoih Dimensions: 2700 x 1350 x 1850mm high Weight: 2300 Kgs

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) Iodpfxjya H Nkj Ahyjih 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 1630 ProtoTRAK CNC Gap Bed Centre Lathe Ex Research machine – Superb Condition ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 760mm Max’ Swing over Cross-slide 218mm Max Swing over Bed 400mm Spindle Bore 52mm Spindle Speeds 150 – 2500 rev/min Spindle Motor 5.75Kw Spindle Camlock D1-6 Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 60mm Tailstock Travel 127mm Manufactured | 2011 Weight 1560Kgs Supplied with: Two-axis CNC, Two-axis DRO. TRAKing, Constant surface speed. Electronic hand-wheels for X & Z Axes. Ijdpfx Aezav D Djhyeih Joystick for feed & rapids. Interlocked chuck guard and main guard. Quick change toolpost with holders. 3 Jaw chuck 5C Collet Chuck Coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78211 Machine Serial Number: 16P99080-063 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots Iisdpfx Ahezuxn Teyoh T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. Isdexghngepfx Ahyoih As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Isdsz Rk Nmjpfx Ahyjih Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Iiedpfxez Rk N To Ahyjh Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Iijdsyzf Naepfx Ahyoh Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, MASTERWOOD CNC Machining Center Type MVD 900 - Edition Partnership - Showroom Machine Through-feed processing, Ball screw drives on all axes, Network card for remote maintenance, Integrated control cabinet, Saw unit for grooving in the X direction, Pick-up tool changer, Automatic central lubrication, Sensor for panel measurement Iisdpoyrhcpefx Ahysh ----- Technical Data ----- Min. workpiece length X: 250 mm Min. workpiece length Y: 80 mm Min. workpiece thickness: 10 mm Max. workpiece length X: unlimited mm Max. workpiece length Y: 990 mm Max. workpiece thickness: 60 mm Main spindle motor power: 4.5 kW Main spindle speed: 1,000 - 18,000 rpm Main spindle taper: ISO 30 Number of vertical drilling spindles: 20 Saw blade diameter of saw unit: 125 mm Number of tools in changer: 6 Extraction connection diameter: 100 + 100 mm Includes: - Complete tool set: Drill bit set for boring head 1 HW grooving saw blade 2 x DP grooving shank cutters 1 HW-WP finish cutter 3 collet chucks with collets - New showroom machine -

Condition: used, Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 700 mm, total height: 1,500 mm, type of input current: three-phase, overall weight: 250 kg, input voltage: 380 V, length stop: 3,000 mm, lifting height: 250 mm, We offer this used OZ MACHINE METEOR - II 420 lightweight aluminum circular saw, manufactured in 2021. Model: METEOR - II 420 Serial number: 018/210023 Year of manufacture: 2021 Total power: 3 kW Frequency: 50–60 Hz Iijdpfx Ahozy Upksyjh Voltage: 400 V AC 3P 1N PE Current: 6.4 A Dimensions (L×W×H): 3760×1080×1325 mm Weight: 264 kg Air pressure: 6–8 bar Air consumption: 38 l/min Idle speed: 3000 r.p.m. Saw blade diameter: 420 mm Includes dust extraction system and compressor. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Iijdjxftqdjpfx Ahyoh Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. Iedpfxjzi Awho Ahysih For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.