Used Coating Line for sale (17,382)

Condition: used, Year of construction: 2000, material width 600 mm coil weight 5,0 t material thickness 0,5 - 5,0 mm coil internal diameter 360 - 660 mm coil external diameter 1500 mm Podpfxsvut S Rj Agwsrc no. of straightening rolls 9 straightening roll diameter 80 mm number of draw-in rolls 2 material cross-cut 1500 mm² material thickness at 600 mm material width 2,5 mm material thickness at 300 mm material width 5,0 mm power requirement 15,0 kW weight of the feeder-straightener 2,5 t weight of the decoiler 1,6 t dimensions of the feeder-straightener 1,7 x 1,7 x 2,6 m dimensions of the decoiler 1,8 x 2,0 x 2,3 m Feeder-straightening machine VCRL 650, yom 1994, General overhaul 2001 with infinitely variable drive, motoric height adjustment, hydraulic alligator opening, pneumatic intermittent lifting Decoiler SM 5000, yom 2000 with auxiliary drive, hydraulic expansion, hydraulic snubber roll. loop control via contact plate as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, all stainless steel dimensions: ± 4,500 x 1,800 x 2,400 mm drum diameter: 900mm net drum length 3.000 mm adjustable inclination angle easy to clean inlet height: ± 2,350 mm (adjustable if necessary) discharge height: ± 850 mm power 3kW 400V, 50Hz 3 spray pipes Provided for extraction Pjdpfx Agexp Hgmswerc

Year of construction: 2015, condition: used, W and C Profile Production Line for Sale Designed for the production of road barriers, posts, and fastening elements. Fully equipped line suitable for continuous industrial manufacturing. The line consists of: - Two decoilers Prodpfjxhf R Isx Agwjc - Post production line - Parapet (guardrail) production line - Two presses for fastener manufacturing Technical specifications: Length: 17 m Width: 1 m Height: 1 m Motor power: 22 kW Weight: 18 t Year of manufacture: 2015 Manufacturer: Chengxing Machinery (China) Purpose and advantages: This W and C profile production line is designed for manufacturing various road safety components: detachable road barriers, support posts, and fastening parts. The equipment ensures a reliable, stable, and consistent production process. The machine is available for inspection. If you have any further questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2019, functionality: fully functional, inner dimension length: 7,400 mm, inner dimension width: 1,600 mm, inner dimension height: 2,200 mm, Powder Coating – Complete System for Large Parts – including Curing Oven 7,400 mm, year 2018–2021 Complete powder coating system for large parts, including: • OVEN (1): Vismont KWP-440/114 – Internal: 7,400 mm length – year 2018 • OVEN (2): Libra SLET40-25-20 – year 2020 • POWDER BOOTH: Vismont KNP-1500/06 – year 2018 • WASHING SYSTEM: Libra MR35-21-17 – year 2021 • MANUAL WASHING UNIT: Libra MR42 – year 2020 • AIR FILTRATION SYSTEM: Kemper 390600 – year 2016 • MANUAL POWDER COATING SYSTEM: Nordson Encore HD MPS – year 2021 • SCREW COMPRESSOR: Kaeser SM 15 – year 2013 • OVERHEAD CONVEYOR SYSTEM • FORKLIFT: Hyundai 30L-7A – year 2012 All equipment is in operation and fully functional. Podpexrd A Dofx Agworc Price: Depending on partial or complete purchase.

Condition: new, mileage: 1,138 km, first registration: 10/2025, fuel type: diesel, number of seats: 63, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, cruise control, = Further options and accessories = - Retarder - Webasto = Further information = Height: 346 cm Damage: none = Company information = Prjdsxrdpwspfx Agwsc We are an international company based in Belgium, in the surroundings of Brussels (+/-20 km,). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses and coaches and has an extensive parking lot that serves as a showroom. We always have numerous buses of all makes, capacities, models and price levels in stock. We can find you the right tourist, school or public service bus to suit your needs or budget. All information without guarantee. Errors, prior sale and typing errors excepted. Opening hours for viewing used buses: Mon.-Fri.: 08:30 - 12:00, 12:30 - 17:00 Mowimy po Polsku Agata) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski and more.

Condition: new, Year of construction: 2025, functionality: fully functional, blade shaft diameter: 160 mm, sheet thickness aluminum (max.): 4 mm, coil weight: 20,000 kg, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness brass (max.): 4 mm, cutting speed: 90 mm/min, product height (max.): 4 mm, working width: 1,600 mm, type of input current: three-phase, total width: 6,000 mm, total length: 28,000 mm, total height: 2,600 mm, feed roller diameter: 126 mm, operating speed: 60 mm/s, inner diameter: 508 mm, input voltage: 380 V, product width (max.): 1,600 mm, number of feed rollers: 2, number of straightening rollers: 17, power: 145 kW (197.14 HP), RAEDY IN STOCK ---> COIL SLITTING LINES Coil Slitting Line is a machine specially manufactured for slitting master coil in to baby coils. Coil Slitting Lines consist of the following equipment and units; Coil Car / Loading Trolley Decoiler / Uncoiler / Coil Unwinder Strip Transfer Unit Straightener / Leveler Strand Extensioner Leveler Slitting Head witg Slitting Knives Spare Slitting Head and Knives for Quick Change Psdpjh Dy Iysfx Agwsrc Scrap Recoilers / Winders First Strip Transfer Unit Strip Tension Control Separator Units and Parts Coil Rewinder System Coil Extraction and Easy Handling System Exit Car Hydraulic and Pneumatic Systems Electronic Control Panels

Condition: used, Year of construction: 1994, material width 650 mm coil weight 3,5 t material thickness 0,8 - 3,0 mm no. of straightening rolls 7 straightening roll diameter 80 mm number of inlet rolls 4 coil internal diameter 460 - 530 mm coil external diameter 1400 mm weight straightener 1,0 t weight decoiler 0,9 t dimensions straightener (WxDxH) 1,5 x 1,9 x 2,0 m Pjdpfsvut Sdsx Agwerc dimensions decoiler (WxDxH) 2,2 x 1,8 x 1,9 m Feeder-straightening machine DREHER 1676 E/RDS Modell 1529/4 with infinitely variable drive Decoiler DREHER 2380 FM-FPS Modell 891/5 motoric driven. with pneumatic lag brake, manual centralized expansion, pneumatic snubber roll coil loop control Ultrasonic

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, feed length X-axis: 13,000 mm, feed length Y-axis: 240 mm, feed length Z-axis: 100 mm, feed rate X-axis: 25 m/min, pressing force: 40 t, input voltage: 400 V, total height: 1,120 mm, working height: 1,120 mm, milling spindle length: 330 mm, control voltage: 400 V, workpiece height (max.): 100 mm, tool diameter: 240 mm, rotational speed (max.): 6,000 rpm, air pressure: 7 bar, total length of planing tables: 13,000 mm, We offer a fully automated production line for the manufacture of KVH structural timber. The line is fully certified with CE marking and by the Wood Technology Institute in Poznań. Compliant with ENPN 14.081 and 14.081 standards 1. Angled discharge conveyor 2. Infeed table for visual wood grading 3. Buffer before defect cutting saw 4. Automatic defect cutting saw with camera for fluorescent chalk 5. Buffer before finger jointing machine 6. Finger jointing machine with glue applicator and cross-cut saw for lengths up to 13 m 7. Chain conveyor storage from finger jointing machine to four-side planer 8. Automatic infeed for four-side planer 9. Four-side planer Winter 6-33 10. Outfeed roller conveyor from four-side planer 11. Automatic packaging machine for planed timber 12. Chain conveyor Pjdpjxfzyyofx Agwjrc 13. Strength tester for laminated timber

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, Pedoxlcp Nopfx Agworc precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Condition: used, *Available from approx. end of 2025* Fully automatic finger jointing line for the following dimensions: Thickness: approx. 24 – 100 mm Width: approx. 80 – 240 mm Finger jointing length: 400 – 1,500 mm Finished length: 2.50 m – 13.50 m continuously variable Consisting of the following system components: - SMB vacuum destacking lengthwise with 2 lifting tables and 2 package roller conveyors, built in 2013 Package dimensions max. 1.20 x 1.20 x 6.00 m 4 suction pads Sicko system Separation and infeed into roller conveyor for scanner feeding, board turner, switch for too moist, too dry, switch for B-quality, marking station or automatic operation - Bidac end-face scanner for cupping detection, built in 2013 - Brookhuis moisture measurement FMI 5 Year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras and new optimization software - Dimter-Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009 and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT finger jointing system with turntable Spezialpack AH 1050, year of manufacture 2005 consisting of: Milling machine · Tipping station · Threading section length 5.0 m · Cyclic press length 6.00 m · Cross-cut saw - SMB stacking machine, year of manufacture 1998, 2.50 - 13.50 m length, divisible into 2 units (e.g. 2 x 5.0 m) 8 stacking arms, 8 stacking tongues, manually adjustable electro/hydraulic stop, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package pusher Podpfxsvvi Tys Agwsrc Storage location: Customer

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 41,000 mm, type of input current: AC, Equipment: documentation/manual, Insulation glass production line for Low-E glass LiSEC – Austria, h=1.60 m with Double Gas Press, Sealing Robot, … Glass dimensions: max. 2500 x 1600 mm, min. 250 x 180 mm Max. thickness of the glass unit 52 mm Types of gases: Argon + Krypton. The line can make shapes. Year: 2008. In very good condition. Inspection during production is possible by appointment. 1. VHW-16-6, washing and drying machine, 6 brushes, 2. RSVN-25/16U, mounting station for spacer frames, 3. FPS-26/16U, gas filling press, Psdsxrc Ewspfx Agworc 4. FPS-26/16U, gas filling press, 5. VFL-1D/16 + DOS-1PSD, automatic sealing system / robot with dosing unit, 6. A complete set of appropriate transport stations (inlet and outlet).

Condition: used, Year of construction: 1997, functionality: fully functional, Production line for packing, blending, filtering and homogenizing of dry products from D.H.T. van den Dikkenberg (NL) The production line is suitable for both food and feed blends and has a capacity of 3mt per hour. All dairy powder and powders of plant origin can be blended, such as milk powder (SMP/WMP), whey powder, buttermilk powder, powder of milk permeate, lactose, dextrose, whey protein/fat concentrates, FFMP, soy protein, pea flour and etc. The number of blended ingredients is unlimited. The line for the production & packing of dry blends: - meets the requirements for materials in contact with food products; - is made of durable materials that don't change the smell and taste of food products, don't absorb moisture and food particles, are corrosion-resistant materials, and are safe to use; - all surfaces are resistant to repeated exposure to cleaning and disinfecting agents; - is designed and manufactured in such a way that there are no cavities inside in which the processed products accumulate, and this would not create conditions for contamination of the manufactured products; - is mounted in two 40'foot sea containers, which ensures easy transportation of equipment. The production line has the following units: 1) two-stage filtering of the poured raw materials through coarse and fine sifting sieves First, the raw materials are sifted through a sieve with eyes of 5 mm in diameter. At this stage, foreign impurities and hardened particles over 5 mm are separated. In the next sifting unit, the raw materials are sifted through a sieve with eyes of 0.2 mm. In this way, all foreign particles over 0.2 mm are completely separated from the raw materials. 2) mixing of components into a homogeneous blends The mixing process in a horizontally located mixer is very gentle. The blended ingredients remain undamaged and retain their structure, which is very important for the products of instant category. 3) dosing of finished products into bags Prodpfjwhf Ddsx Agwec The line is equipped with a dispenser, which is technologically connected to automatic scales. It allows to select and set the desired volume of the packed product. Standard packaging options are 20-25 kg net. 4) suction of excess air An integrated vacuum unit helps to suck out of the filled bags an excess air. The product becomes denser, less airy, and when stacking the bags pallets, the entire structure becomes more stable. The stability of the pallets is very important for the safety of the cargo during transportation. 5) sealing of the inner poly liner The line is equipped with a sealing unit, which helps to seal the inner poly liner. Sealing the liner ensures its tightness, which helps to prevent the moisture penetration into the finished product. Since the powder is very hygroscopic product, its reliable protection from moisture is very important for preserving the quality of the manufactured products. 6) sewing up of paper bags with/without crepe paper The line also has an integrated sewing unit for closing of the paper bags. For more reliable tightness of the packaging, a crepe paper tape in the same colour as the bag may be used additionally. The line is equipped with 3 bunkers with a capacity of 1 mt each: 1) raw material blending bunker; 2) product settling bunker after blending; 3) finished product bunker. The line has a high production efficiency and very easy maintaining and operation.

Condition: used, Year of construction: 2012, functionality: fully functional, The plant comprises the following components:  Platform with a vibrated base for the bin support; this platform is protected by perimeter railings and is accessed via a ship-type ladder; Predpfx Agoxrcc Aowec  Empty bag magazine; the supply of empty bags is performed manually by the operator. The exact position of the bags is secured by adjustable side guides; a sensor located under the stack of bags signals when the pile is depleted;  On the structure of the empty bag magazine, pneumatic cylinders are installed for gripping the bag, opening its mouth, and inserting it onto the product dosing spout. The bags are handled by a series of suction cups. The pneumatic control panel QP1 is also mounted on the supporting structure of the magazine;  The dosing spout is supported by 3 load cells; at the outlet, a bucket-type gate valve driven by two pneumatic cylinders is installed. Next to it, two additional cylinders with hooks at the ends are used for tensioning the bag mouth.  The bag is clamped along its longer side by two jaws that hold it after filling and guide it to the sewing machine. Movement is achieved by geared motor units and wheels sliding on chrome-plated rods. At this stage, the bag rests on a motorized conveyor belt for transfer; this belt is also raised via a pneumatic cylinder so that the bag rests gently upon filling completion; the height of this belt can be adjusted manually using a handwheel acting on four jacks, to adapt the belt height to the bag type.  Once inserted into the sewing machine, the bag is stitched and the thread cut; still resting on the conveyor, the bag reaches the overturning station—there, it is held by two jaws, rotated 90°, and finally released so as to be parallel to the conveyor.  The next belt features, in its initial part, a series of square rollers for bag straightening, followed by a conveyor belt for forward movement;  Lastly, there is the roller conveyor where the bag is picked up by the robot; this conveyor is stopped by a photocell when the bag reaches the end of the roller line;  The robot gripper is of the comb type and is equipped with a translation cylinder to discharge the bag and two cylinders operating a plate to lock the bag during handling prior to discharge.  Two boxes containing the solenoid valves and vacuum units are installed on the plant;  An electrical control panel manages the entire plant; the operator panel and weighing module are installed on it;  The robot is managed by its own control panel with a dedicated operator interface;

Year of construction: 1996, condition: excellent (used), film width: 1,300 mm, Used single-layer blown film extruder for sale in excellent condition, featuring a 150 mm die diameter and a production capacity of up to 100 kg/h. Model: Queens EP-65N Processable materials: LLDPE/LDPE/MDPE/HDPE/other blends. Screw diameter: 65 mm Head: • Blown film die head • Die diameter: 150 mm Die gap: 1.2 mm Output: Up to 100 kg/h, depending on material composition Pjdpexrb Hmofx Agwerc • Maximum speed: 120 m/min • Winding width: 1300 mm - Flying knife roll slitting Accessories included: • Tower • Gravimetric weight control system • Masterbatch dosing unit • Calibration cage The machine can be inspected in operation. Offered with spare parts.

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. Podpfxowd E N Ee Agwjrc The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: used, Year of construction: 2005, *available from around mid 2025* Unimat 23 E: Working width (with a cutting circle of 140 mm): 20 - 230 mm Working height (with a cutting circle of 163 mm): 8 - 120 mm 1st spindle, lower horizontal spindle: 7.5 kW 2nd spindle, right vertical spindle: 11 kW (together with the left vertical spindle) 3rd spindle, left vertical spindle 4th spindle, upper horizontal spindle: 7.5 kW Spindle diameter each: 50 mm Speed each: 8,000 rpm Feed system: 4 kW Mechanical feed, continuously variable: 5-24 m/min. Work table 2.5 m long (including jointing ruler) Uniplan 23: Max. working width: 230 mm Min. working height: 15 mm / max.: 120 mm Feed: 3 kW Horizontal spindles 5.5 kW each Feed speed, continuously variable: 6 – 36 m/min Spindle speed: 6000 rpm Spindle diameter: 50 mm Tool clamping length: 240 mm Max. tool cutting radius: 163 mm Fixed bottom chip removal: 0.5 mm Short parts package for min. wood length: 280 mm Mechanical spindle brakes up to 7.5 kW Braking system for feeds up to 5.5 kW 1st infeed roller with photocell - Spindle speed 7200 rpm, including motor power 7.5 kW - Improved sound insulation of the full safety enclosure. Psdpfx Agovvkciewerc Storage location: Customer

Condition: used, !!! Attention: Only the conveyor system is offered here !!! Available for sale is a floor conveyor system for a wheel rim coating line. The system consists of the following components: - Conveyor chain - Conveyor rails (curved and straight rails) - Carriages with mounts for automotive rims - Rotating rail: the rim rotates on this rail during the coating process to ensure even paint application Total length approximately 150 meters Maximum part size: 550 mm diameter Maximum part height: 400 mm The system is suitable for both wet paint and powder coating processes. No control unit is included with the system. Prodpfx Agoxfzuqowoc The system has been dismantled and packed in crates. Inspection is possible by appointment. The system must be serviced before being put into operation. Two additional systems are also available. These are suitable for baking/curing in an oven.

Condition: good (used), Year of construction: 2003, Fritsch CTR croissant line - used - year of manufacture: 2003 - components: CTR cutting machine, croissant forming machine for filled products, croissant forming machine for unfilled products - electronic control - machine from production Podpfx Aexrbq Segwerc - technically operational - collection from warehouse / shipping option - price on request

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: Prsdpfjxpxhvjx Agwec The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2014, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of Pjdpfx Ajxpxfbegwjrc - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: BUD-MASZ Monterrey tile profile roofing sheet production line Prodpfjxhgl Tox Agwsc Condition: used, but fully operational. The line is currently connected to production – it can be tested on-site. Technical specifications: Manufacturer: BUD-MASZ (Poland) Profile: Monterrey Year of manufacture: 2007 Motor power: 15 kW Designed for forming steel roofing sheet with tile profile Robust frame construction ensures stable and precise operation Line purpose: The equipment is intended for profiling steel sheets into roofing sheets with a tile imitation profile. Suitable for both serial production and custom orders. Manufactured in Poland, ensuring reliable quality and long service life. The machine is connected – inspection and test run are possible. If you have any further questions, we will be happy to assist you.

Condition: used, Year of construction: 2011, Profiling machine in good condition Specification Prjdow E H Daspfx Agwjc Model: Schlebach Quadro LT Made in: Germany Product width: 540 mm Cutting: circular shears Weight: 910 kg If you have any further questions, we will be happy to answer them.

Year of construction: 2022, condition: excellent (used), For sale: Romer powder coating line The powder coating system includes: 1. Oven SW, Romer (5 tracks, doors on both sides) - internal dimensions: 3000 x 1500 x 2200 mm 2. Romer powder coating booth KPO-3ZN 3. Transport system: total dimensions 5900 mm length x 14000 mm width, 2 trolleys x 5 tracks 4. Traverses with rollers (20 pcs.) 5. Painter's outfit: Versaflo Air Filtration Unit 3M TR-300, Versaflo Helmet 3M M-407 Podpelyrb Eofx Agwjrc Equipment manufactured in 2022, lightly used (approx. 6 months). If you have additional questions, we will be happy to assist you.

Condition: excellent (used), ElectroMashStan automatic tube rolling line. For rolling tubes up to 1.5 mm thick. Can be painted or plain. Designed for a production of 11 metres. Automatic cutting. Automatic line with 6 speeds. It has been used for the production of fence posts. Purchased new, one owner. Total length 15 metres. The line is in very good condition, little used. If you have any further questions, we will be happy to answer them. Prsdeufz Rdepfx Agwoc

Condition: used, Swiss manufacturer GEMA injection powder coating equipment for sale, manufactured in 2002. It consists of: Powder coating manipulators (2pcs of 8 nozzles each) for painting parts up to 1800 mm high; Control and programming cabinet for the manipulators; Powder feeding centre; If you have any further questions, we will be happy to answer them. Predpfjqlazdsx Agwsc