Used Cnc Vertical Borer for sale (14,161)

Condition: ready for operation (used), chuck outer diameter: 1,400 mm, total height: 4,100 mm, empty load weight: 20,000 kg, Type: Stanko 1516 Maximale werkstukhoogte: 1000 mm Verticale schuifmaat maximale horizontale slag: 950 mm Itodpfx Afov Sftzjion maximale verticale slag: 700 mm Horizontale schuifmaat maximale horizontale slag: 630 mm maximale verticale slag: 1000 mm Dwarsbalk maximale slag: 660 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long: 3170 mm Wide: 3030 mm

Condition: good (used), Parts on table not come. Marked with red. Iedpewxdyxofx Afiotn

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 130 mm max. module: 3 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm * 2500 mm * 2170mm Accessories : Itodpfx Afewv Uhboion Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor *

Condition: ready for operation (used), Year of construction: 1978, CNC vertical lathe Manufacturer: BERTHIEZ Model: TFM 200 Year: 1978/1995 CNC: NUM 1062T / SOMAB PL+S3 (Teach-in, ISO and Conversational modes) Specifications: Itsdpew Adpbjfx Afijn Table diameter: 2,000 mm Maximum swing: 2,300 mm Usable height: 2,000 mm Table load capacity: 20 t Table rotation speeds: 1.6 – 200 rpm Table motor power: 55 kW Ram section: 200 x 200 mm Standard table height from floor: 731 mm Vertical traverse stroke: 1,300 mm Traverse movement speed: 400 mm/min Vertical ram travel: 1,600 mm Right carriage travel (from table axis): 1,280 mm Left carriage travel (from table axis): 400 mm Continuous feed rate range: 0.05 – 24 mm/rev CNC programmable feed rate: 0.2 – 360 mm/min Rapid traverse: 6,000 mm/min Equipped with: 12-position tool changer Chip conveyor

Year of construction: 1984, condition: used, Used Horizontal borer TITAN AFL 150 CNC CNC Heidenhain - X column - 9000 mm; - Y vertical - 2000 mm; - W spindle - 900 mm - Z column cross - 600 mm Iedpob Hv Twefx Afijtn - spindle speed 900 rpm - spindle dia. 150 mm - Machine weight aprox. 50 tons Floor plates 2 pcs. 2000x6000 Rotary table Skoda E20

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining centre with SIEMENS 840 D, 2-fold pallet changer, IKZ, linear guides and 30-fold WZW table size 2 x 1000 x 450 mm tool holder DIN 69871 ISO 40 travel X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm speed range 50 - 10.000 rpm table load 600 kg Ijdpfx Ajd I R E Nofiotn feed range, X/Y/Z, infinitely variable - 10000 mm/min rapid traverse in all axes 30 m/min Drive power 18,5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm weight approx. 6700 kg Accessories / special features: - CNC-control SIEMENS 840 D - 2-fold pallet changer - 30-fold tool changer - Full protection cabin with safety doors, electrically protected - High speed up to 10.000 rpm and drive power with 18,5 kW - Linear guides with double recirculating roller shoe, allowing high torques to be absorbed uniformly in all directions - Ball screw spindles in all 3-axes - The entire machine bed is made of Meehanit cast iron and ensures precision, rigidity and vibration damping - Tool holder DIN 69871, ISO 40 - Hinged chip conveyor with integrated coolant system - 4th axis already prepared - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), travel distance Z-axis: 510 mm, feed length X-axis: 1,660 mm, feed length Y-axis: 410 mm, controller manufacturer: Mazatrol, total height: 2,700 mm, total length: 3,900 mm, total width: 3,050 mm, empty load weight: 6,000 kg, rotational speed of tool magazine (max.): 7,000 rpm, Mazak VTC-41 L X: 1660 - Y: 410 - Z: 510 mm CNC Table dimensions: 2000 x 410 mm Max weight on the table: 800 kg Depth of throat (uprights-spindlecenter): 460 mm Admission in spindle (ISO): ISO 40 Power on the spindle: 11/7,5/5,5 kW Drilling-capacity: max dia 25 mm Itodpfowwbf Asx Afijn Tapping-capacity: max M24 Number of axes: 3 axes Toolchanger: yes

Condition: good (used), Year of construction: 2007, Machine is in good condition, Itsdpfx Afswk Nm Isien Parts shown by hand not come. SK 40, 24 tool places in tool changer. 10.000 rpm

Condition: used, Year of construction: 1980, turning diameter 7000 mm faceplate diameter 3500 mm Itjdpfouddlzex Afisn workpiece height 3000 mm 160 mm 1998 Control Siemens 840 C max. table load 60000 kg electr. connected load 400 V Serial number 11 33 0051 total power requirement 71 kW weight of the machine ca. / t required space 13 x 6 m The SCHIESS-FRORIEP 40 DV is a vertical lathe built in 1980. The machine was modernized and improved in 1998. Among other things, a driven tool system (C-axis) was installed. In addition, the control system was modernized to SIEMENS 840 C. The large open-sided vertical boring mills with travelling column - type DV - are particularly suited to situations where likely workpieces frequently change in diameter but where maximum workpiece dimensions are rare. Decisions in favour of this type of machine are generally due to minimum floor space requirement, universal adaptability and economical advantages. The modern design of these machines is characterized by rigid all-steel construction optimized by computer - SCHIESS can claim to have done much valuable pioneering work in this area of heavy-duty machine tool building.

Condition: ready for operation (used), Year of construction: 2018, 4-Axis CNC Vertical Lathe Brand: UMARO Model: SC27 Isdpfx Ajw Add Esfietn Year: 2001 / 2018 (retrofitted) CNC: FANUC 0i Specifications: Turning capacities: Max. swing diameter: 2650 mm Max. turning diameter: 2600 mm Max. turning height: 1900 mm Table: Diameter: 2500 mm Max. load: 15 t Rotational speed (2 ranges): 1 to 112 rpm Main motor power: 75 / 60 kW Cross rail carriages: Vertical travel right carriage: 760 mm Vertical travel left carriage: 1200 mm Cross rail: Vertical travel: 1600 mm Dimensions (width x depth x height fully extended): 5 x 4.8 x 4.8 m Equipped with: Grinding spindle on left carriage Set of 4 jaws

Condition: ready for operation (used), VTL MORANDO KL 12 CNC Fagor 8040 Iedpfx Aetvv Sqefijtn Faceplate diameter: 1200 mm Swing diameter: 1400 mm Turning height: 1080 mm Main motor: 40 kW Total power requirement: 50 kW Weight of the machine ca.: 18 t Movie underpower available

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, Vertical Turret Lathe - Double Column with boring and milling unit and grinding device / Brand: CKD-BLANSKO / Type: SKD 50 CNC / Year of construction: 1992 Retrofit/Modernization: 2011 (Electrical and mechanical overhaul/modernisation) The machine can be inspected by appointment. Condition: Functional / ready for immediate use. TECHNICAL SPECIFICATIONS: - CNC Control: SINUMERIK 840D SL Working area: - Faceplate diameter: 4.770 mm - Swing diameter: 5.300 mm - Turning height max.: 4.000 mm / max. height without tools: 4.130 mm - Table load max.: 100 tons - Z-axis (RAM): 1.950 mm Crossbeam: - Travel: 3.600 mm - Adjustment speed: 500 mm/min Pick-up Magazine: - 8 Tool holder positions - Automatic clamping of the tool holder in the ram - 1 straight boring head - 1 Angle head, 90°(not in pick-up) Itedpfx Afev Uzw Usien - Machine weight approx.: 110 tons There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: good (used), turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,400 mm, Manufacturer: VIPER Type: VTL 20/24 M Control: Fanuc Oi-TD Year of construction: 2008 X Stroke 1835mm Z Stroke 1000mm Table load 20 Ton Ram size 230 x 230 mm Stroke cross rail 800 mm Stroke crossrail in 5 steps each 200 mm Live tools 2000 rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360,000 Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Specifications Metric US standard Max. turning diameter 2400mm Table diameter Ø 2000 mm Tool changer 18 Ijdpfx Aov R Di Sofiotn Speed 200 rpm Power 48 kW Max. turning height 1500 mm C-axis 360,000 ° Dimensions (estimate) Length 9,300 mm Width 6,300 mm Height 6,700 mm Weight 48,000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: like new (used), Year of construction: 2001, Parts shown by hand not come. Iedpok Iugzofx Afijtn

Condition: used, Year of construction: 2000, functionality: fully functional, table diameter: 132 mm, wheel diameter: 130 mm, spindle speed (max.): 3,500 rpm, tool diameter: 80 mm, swivel angle A-axis (min.): -40 °, swivel angle A-axis (max.): 40 °, Gear Hobbing Machine - Vertical SAMPUTENSILI S130 CNC Module Well-maintained CNC vertical gear hobbing machine for shafts and gears with tailstock Also suitable for hard milling (good for steering pinions) TECHNICAL DETAILS Control type: CNC Control name: Sinumeric 840C Iodpjwmb Nyofx Afijtn Gear diameter: max. 130 mm Module: max. 3 Total power requirement: 15 kW Machine weight: approx. 6 t Space required: approx. 2.3 m x 2.5 m x 2.17 m Rapid traverse radial, axial: 10,000 mm/min Rapid traverse tangential: 7,500 mm/min Max. gear diameter: 130 mm Max. module: 3 mm Tangential slide travel: 200 mm Radial Sliding travel: 10/100 mm Axial slide travel: 300/200 mm Milling head speed: 250-3500 rpm Milling head: Tiltable up to ± 40° Tool diameter: 80 mm Tool length: max. 240 mm Table speeds: 5-1000 rpm Milling spindle drive: 15 kW Feed range: 0.1-2000 mm/min Table diameter: 132 mm MACHINE DETAILS Control: Sinumerik 840 C Connected load: 40 kVA Motor power: 15 kW Weight: 6 t Dimensions: 2300 x 2500 x 2170 mm EQUIPMENT - Hydraulic workpiece clamping - Automatic loading system - Magnetic Chip conveyor

Condition: used, Year of construction: 1993, turning diameter ca. 500 mm swing diameter ca. 600 mm Itsdjtyp Suopfx Afijn travel -x axis ca. 400 mm travel -z axis ca. 600 mm spindle turning speed range 2000 U/min spindle drive 63 kW control SIEMENS control SINUMERIK System 3 tool turret 1 x 12 Pos total power requirement kW weight of the machine ca. 9,3 t dimensions of the machine ca. m - R-version, turret right hand side of 3-jaw chuck - Accessories: hydr. 3-jaw chuck 400 mmø, various toolholders for turret, chip conveyor, coolant

Condition: good (used), Year of construction: 2009, Modernized in 2009. Brand : Stanko CNC : Siemens. Table Diameter : 2250 mm. Working diameter : 2500 mm. Working height : 1600 mm Itodpewtrvqjfx Afion Main motor : 45 KW. Weight : 45 000 kg.

Condition: used, Webster & Bennett 48″ EV Type Vertical Borer Serial number 6644-4 Year of Manufacture 1974 Power clamping to crossrail Itodpfx Afjwtmiloien 48 inch table 3 off Table Jaws Table Speeds 6.3-140 rpm 42 inch under rail to table 2 axes DRO 37kw / 50hp motor 28″ Ram Travel Coolant Pump & Tray

Condition: used, Year of construction: 2006, spindle passage 65 mm spindle diameter in front bearing 110 mm number of spindle speeds 5.000 U/min Power 20/27 KW Control INDEX C 200-4 travel -x axis 850 mm travel -z axis 260 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC turning and milling center vertical | INDEX - V160C equipped with turret, milling spindle and pallet conveyor system. Itjdpfxjvzcnzj Afijn The machine only has 17.000 hours of Power-On. The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-160C | V-160 C | V 160 C | V 160C

Year of construction: 2008, condition: good (used), Parts shown by hand not included. 12.000 rpm X 610 mm Isdpfx Aepmtzhsfietn Y 420 mm Z 450 mm

Condition: good (used), CNC FAGOR 8070 PLATFORM DIAMETER 400O MM MAXIMUM TURNING HEIGHT 2500 MM MAXIMUM TURNING DIAMETER 4000 MM PERMITTED WEIGHT 100 TON MAXIMUM VERTICAL DISPLACEMENT OF THE CROSSBEAM 1600 MM CARRIAGE DISPLACEMENT ANGLE -15/ + 40 ° Itsdpfx Aevygvtofijn PLATFORM ROTATION 0.46 - 42.5 RPM CROSSBEAM SCREW FEED RANGE 240 CARRIAGE RAPID FEED 3125 RPM MAIN MOTOR POWER 60 KW NR 02 TURNING CARRIAGES OVERALL DIMENSIONS 6100 X 10400 H 8400 MM WEIGHT 134 TON YOM 1980 - RETOFITTED 2010

Condition: used, Year of construction: 2001, workpice diameter max. 90 mm Iodpfx Afovzcnbsijtn forward bearing diameter 140 mm Turning speeds mainspindle 4.200 U/min Power 35,5 KW Control INDEX C 200-4 travel -x axis 1.500 mm travel -z axis 340 mm travel -y axis 180 mm b-axis 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300

Condition: good (used), Year of construction: 2001, Machine is in good condition. Itodpfx Afowqf Rvoisn Technical details shown on picture.

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Itodeufp Svepfx Afion Parts shown by hand not come.

Year of construction: 2007, condition: good (used), Technical data shown i pdf file in attachment. Parts shown by hand not come. Chucks on the table are not included. Machine vices not come. Iedjmnp D Ijpfx Afietn