Used Cnc Sliding Head Lathe for sale (25,349)

Year of construction: 2014, condition: used, machine/vehicle number: 239319, recorded operating hours: 14,765 (as of 08/25), weight: 6,760 kg, 12-position tool changer, MAZATROL Smart control, lubricant processing system, chip conveyor, spindle stroke: 1,300 mm, max. machining diameter: 380 mm, SMW K3-ZSW steady rest, ATTENTION: Collection of this item only by prior arrangement!!! Pjdpfx Ahsycitde Hsgg

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Pgedpfx Ahjxf Iamo Hjg Marked equipement with red not come.. Some accesories and machine equipement are also available. More specs of the machine, check last two pictures.

Year of construction: 2018, condition: excellent (used), Hardly used at all. Installation dimensions (L,W,H) mm: 7,023 x 3,337 x 2,480 Weight: 16 t Working area Centre distance: 3,000 mm Cross slide diameter: 650 mm Bed diameter: 700 mm X-axis travel: -15 ... +335 mm Machine equipment A11 main spindle, 2,000 rpm, 1,200 Nm (100%) Tailstock MK5, dragged 12 x KM40 tool holders Loading hatch for automatic loading & unloading Podjychzmspfx Ah Hsgg 400V, 50Hz

Condition: excellent (used), Year of construction: 2019, CNC Lathe 2-Axis Doosan Puma GT2600 Year of manufacture: 2019 Control: Fanuc i Series with Manual Guide Max. turning diameter: 460 mm Max. turning length: 658 mm Spindle speed (belt drive): 3,500 rpm Spindle bore: 81 mm SMW Autoblok chuck 250 mm Axis travel: - Z axis: 680 mm - X axis: 265 mm 12-position tool turret Tailstock Renishaw tool probe - chip conveyor with tank and pump - documentation - tool holders Operating hours: 2,700 hours Very good condition Pjdeycgpcspfx Ah Hjgg

Year of construction: 2002, condition: used, The machine has two working axes and two service axes (2+2), Y and X. Steady rest and tailstock are motorized. Pgsdoycguljpfx Ah Heg Further details will follow...

Condition: used, Year of construction: 1995, Traub Type TNC 42/65 DG CNC Lathe with Traub System TX8F Control,Twin Spindle with Collet Chucks, (2) x 10 Station Turrets, Swarf Conveyor. S/No. 251 (1995). Country of Origin: Germany Pjdpoyfgmmofx Ah Hogg Location: These lots are located in Leamington Spa, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2013, condition: used, Mazak Quick Turn Smart 200 CNC Lathe with Mazatrol Smart CNC Control, 2 Axis, 12 Positioning Indexing Turret, Kitagawa BB208 3 Jaw Chuck, Cromar Swarf Conveyor. S/No. 249189 (2013) Machine Weight 4410kg. Country of Origin: United Kingdom Pjdpfx Ahoyfgaas Hjgg Location: These lots are located in York, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: ready for operation (used), Year of construction: 1989, turning diameter over cross slide: 340 mm, turning length: 520 mm, turning diameter: 568 mm, rotational speed (max.): 5,000 rpm, overall weight: 5,500 kg, Fanuc OT 10-position turret capacity 520x568 mm over bed, 340 mm over slide Pgodpeydv Epsfx Ah Hsg spindle speed 5000 rpm weight 5500 kg

Condition: ready for operation (used), Year of construction: 1991, turning diameter over cross slide: 300 mm, turning length: 600 mm, turning diameter: 450 mm, spindle speed (max.): 6,000 rpm, overall weight: 4,000 kg, Fanuc OT 12-position turret Spindle speed: 6000 rpm Capacity: 600 x 450 mm on bed, 300 mm on cross slide Pgodpfxeydv Auj Ah Hjg Chip conveyor Weight: 4000 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127690, turning length: 150 mm, turning diameter: 220 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine regularly serviced, in excellent condition. If interested, we have two more identical machines available. Psdpfx Asxr Tzcsh Hsgg

Condition: excellent (used), The machine is in very good condition and has low operating hours. Pgjdjydvi Iopfx Ah Hjg

Condition: good (used), Year of construction: 2008, Weiler DZ 40, year of manufacture 2008, Siemens 840 D control, travel X/Z 200/350 mm, turning diameter 180 mm, max. swing diameter 560 mm, Y-axis +/- 25 mm, Q-axis / programmable tailstock, Q-axis travel 360 mm, Q-axis measuring system rotary, tailstock MK 4, main spindle max. bar capacity 42 mm, spindle bore 52 mm, rapid traverse X/Z/Q 30/30/20 m/min, turret with 16 stations – all stations driven, shank diameter 25 mm, driven tools up to 4,500 rpm, parts tray, accessories, driven tool holders, fixed holders. Pjdpeydvfpofx Ah Hogg

Year of construction: 2014, operating hours: 8,674 h, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; Psdpfxeq H Tr Tj Ah Hogg SWARF CONVEYOR ; ETHERNET PORT ; RS 232 SERIAL PORT ; PCMCIA SERIAL PORT ; USB PORT

Condition: used, Year of construction: 2007, swing dia. 430 mm Distance between the spindles 1450 mm control MAZATROL 640T x-axis 310 mm z-axis 605 mm spindle tunring speed 4.000 U/min Pgsdpfeyb S Nrox Ah Hjg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Gantry Loader Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2006, turning diameter 320 mm centre distance 1190 mm control MAZATROL 640T spindle tunring speed 5.000 U/min spindle bore 61 mm Pedpfx Ahjyb S Nle Hegg bar passage 51 mm x-axis 240 mm y-axis 100 mm z-axis 495 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2005, turning diameter 290 mm turning length 300 mm control Heidenhain greates pass round over bed 380 mm Pjdoyb S Ihjpfx Ah Hjgg total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: good (used), Year of construction: 2018, operating hours: 33,361 h, functionality: fully functional, bar diameter (max.): 65 mm, Equipment: documentation/manual, Miyano ABX64YY with IEMCA bar feeder Since 2021, the machine has been operating with cutting oil Pgjdsydr H Nepfx Ah Hjg Pictures to follow

Condition: used, Year of construction: 2009, turning diameter over cross slide: 900 mm, turning length: 14,060 mm, turning diameter: 1,320 mm, spindle bore: 125 mm, travel distance X-axis: 690 mm, travel distance Z-axis: 14,060 mm, DAINICHI DLX 132×1400 Year 2009 Control: Fanuc-20iTB X: 690 mm, Z: 14,060 mm Podpfx Ajx Tntfeh Hjgg Swing over bed: 1,320 mm, swing over carriage: 900 mm Spindle bore: 125 mm 4 steady rests

Condition: good (used), Parts shown by hand not come. Pedpfx Ajyb R Erjh Hsgg

Year of construction: 2007, condition: good (used), Year of manufacture: 2007 With double turret and double spindle. Psdpfx Asybcfdjh Hegg Further data will follow....

Condition: excellent (used), Year of construction: 2019, turning length: 700 mm, spindle bore: 76 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 720 mm, Twin spindle construction Twin turret configuration with Y Axis (Y-Axis Cutting complex shaped work piece) Build in Spindle motor High Rigidity BMT Turret Full C-Axis 360.000 Slant bed construction 45 Gr Please note Pictures is example not orginal picture ! Max. turning Ø: 290mm X-Axis: 165/195mm Y-Axis: 100mm Z-Axis: 700/720mm B Axis: 668° Spindle bore: 76mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds: 5000Rpm Subspindle bore: 76mm Subspindle power: 22kW ATC / revolver: 12 Speed live tools: 5000Rpm Positions lower revolver:12 Speed live tools: 5000Rpm Power live tools: 6kW Chip conveyor: Yes Tool eye: Yes Length: 3800mm Pjdpfx Aox I Niksh Hogg Width: 2000mm Height: 2100mm Weight: 8500kg

Condition: new, Year of construction: 2024, operating hours: 40 h, functionality: fully functional, turning diameter over cross slide: 570 mm, turning length: 550 mm, turning diameter: 400 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,900 mm, total length: 3,010 mm, total width: 2,500 mm, turning diameter over bed slide: 570 mm, overall weight: 5,000 kg, bar passage: 87 mm, Equipment: documentation/manual, rotational speed infinitely variable, US wheeler LT300M New machine (stock machine) Further configurations and models from the manufacturer available on request. Equipment: Control: Siemens 828D Siemens drive components Centralized automatic lubrication system External housing Telescopic guideway cover Pjdpsv Eu Arofx Ah Hegg Transformer Control cabinet Operator work area lighting Signal tower LCD monitor Linear guides Servo tailstock Hydraulic chuck Sauter tool turret with 12 driven tools (BMT55) Renishaw tool measurement system Machine operating manual Pneumatic air gun Water gun Oil skimmer Chip conveyor and coolant tank Options: Workpiece measurement system Direct measuring systems Oil mist extraction system By equipping the machines with components from the world's leading manufacturers, we can not only ensure the reliability of our products but also provide high-performance and competent service with short response times. Before being delivered to our customers, all US wheeler machine tools undergo comprehensive quality and functionality testing at our premises.

Year of construction: 1982, condition: ready for operation (used), A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible. Pgsdpjydp Azofx Ah Hog

Condition: good (used), Year of construction: 2006, Doosan Puma 280 CNC Slant Bed Lathe With Fanuc Series 21i-TB Control Psdpfoydmfmex Ah Hogg 3 Jaw Power Chuck. Swing Over Bed Ø630mm. Swing Over Saddle Ø500mm. Recommended Turning Ø420mm. Maximum Turning Ø420mm. Maximum Turning Length 658mm. Maximum Bar Capacity Ø76mm. Axis Travel 'X'=242mm, 'Z'=680mm. Rapid Traverse 'X'=20m/min, 'Z'=24m/min. Maximum Spindle Speed 3,500rpm (23kW Motor). 10 Station Turret. turning Tool Shank 25 x 25mm, Boring Bar Ø50mm. Tailstock Quill Taper MT5, Quill Ø100mm, Quill Travel 100mm. S/No.PM2800047 (2006/10). With Tool Setting Arm, Parts Catcher, Tailstock & Foot Switches. Weight 4,700kg.

Condition: good (used), Year of construction: 2007, Mori Seiki NL1500SY/500 Multitasking CNC Lathe With MSX-850 Control (Mapps) & Gantry Parts Loader. Maximum Swing Over Bed Ø928.8mm. Maximum Swing Over Cross Slide Ø755mm Maximum Turning Ø356mm. Standard Turning Ø260mm. Maximum Turning Length 515mm. Bar Working Capacity Ø52mm. Axis Travel 'X'=260mm, 'Z'=590mm, 'Y'=100mm(±50mm), 'C'=0.001°(Increment), 'B2'=624mm. Rapid Traverse 'X'=30m/min, 'Z'=30m/min, 'Y'=10m/min, 'B'=30m/min, 'C'=400rpm. Main Spindle- Collet Chuck. Maximum Spindle Speed 6,000rpm (11/7.5kW Motor). Spindle Nose A2-5. Through Spindle Bore Ø61mm. Sub Spindle- Collet Chuck. Maximum Spindle Speed 6,000rpm (11/7.5kW Motor). Spindle Nose A2-5. Through Spindle Bore Ø43mm. 12 Position Turret. Maximum Rotary Tool Spindle Speed 6,000rpm (5.5/3.7kW Motor). Turning Tool Shank 20 x 20mm. Boring Bar Shank Ø40mm, Sub Spindle Ø32mm, Maximum Tool Shank For Rotary Tooling Ø26mm, Turret Index Time 0.25s. S/No. NL151GB0681 (2007). With Dual Renishaw Tool Setting Arms, Renishaw Spindle Inspection Probe Interface, Coolant System (Tank 235 Litres), Cleanmist CM1000/2 Mist Extraction Unit, Parts Catcher, Parts Loading/Unloading Conveyor, Daikin Inverter Oil Chiller, Enomoto Bea Chip Conveyor, Oil Skimmer, Foot Switches, Signal Tower, Handwheel, Quantity Of Tool Blocks, Rotary Axial/Radial Toolholders & Manuals. Overall Dimensions L2,695 (Plus Gantry Loader) x D2,000 x H2,120mm. Weight 5,700kg. Psdoydl Hcspfx Ah Hsgg