Used Cnc Sliding Head Lathe for sale (28,933)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 150602, turning length: 1,190 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 440 mm, TECHNICAL DETAILS Travel X-axis: 230 mm Travel Z-axis: 440 mm Turning diameter: max. 320 mm Turning length: max. 1,190 mm Bar capacity diameter: max. 51 mm Swing diameter: max. 320 mm Spindle nose: A2-6 Draw tube thread: M60 x 2 Main spindle speed: 35–5,000 rpm Driven tool speed: 4,500 rpm Rapid traverse speed: 30.5/33 m/min Turret stations: 24 Tool holder / Turret type: VDI MACHINE DETAILS Dodpfox Dmm Aex Ab Tola Electrical and Safety Voltage: 400 V Protection class: 1 Connected load: 77.4 kW Footprint & Weight Footprint: 6.5 m² Machine weight: 7,900 kg EQUIPMENT Portal loader GL 100 F

Condition: good (used), Year of construction: 2008, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 52mm bar capacity, Dedpfox Dk Azex Ab Tela 12 station VDI30 turret, 14.7kW Spindle Motor, Spindle Speed 5000rpm, collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor, Barfeed.

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Dlodpfxex Di Rqo Ab Tsa Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, Mazatrol control, 77 mm spindle bore, sub spindle, driven tools, chip conveyor, chuck on both spindles Djdpfx Abjx Dh Axo Tjla

Condition: like new (used), Max. workpiece diameter: approx. 200 mm Number of spindles: 2 Number of tool stations: 12 Control system: SIEMENS Sinumerik ONE Handheld control unit: KUKA Chip conveyor: KNOLL 280 S-1/160, year of manufacture 2022 Cooling unit: DELTATHERM RKV 5.5, year of manufacture 2022, net weight approx. 190 kg, connected load 400/460 V, 50/60 Hz Handling robot: KUKA Industrial Robot Cybertec-2 Series, year of manufacture 2022, net weight approx. 282 kg, payload approx. 22 kg Dedox Ddnkspfx Ab Tsla Robot control unit: KUKA KR C5 Dualcap AC, year of manufacture 2022, connected load 3 × 380–480 V, 50/60 Hz Coolant filtration unit: KNOLL KF 150/950, year of manufacture 2022 Air filtration unit: AFS 1100, year of manufacture 2021, net weight approx. 70 kg

Condition: used, Year of construction: 2000, Technical details: turning diameter: 360 mm turning length: 520 mm total power requirement: 20 kW weight of the machine ca.: 3,8 t dimensions of the machine ca.: 3 x 2 x 2 m Dodpfx Absx Dcgxo Tela

Condition: used, Year of construction: 2008, turning diameter: 380 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 77 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, total height: 1,680 mm, total length: 2,848 mm, total width: 1,860 mm, overall weight: 5,400 kg, CNC Lathe with Y-axis, driven tools, sub spindle and Gantry Loader CNC Control Mazatrol Matrix Nexus Turning diameter 276 / 380 mm Spindle bore diameter 77 mm Spindle speed 4000 R/min Spindle motor 26 Kw Movement X-axis 230 mm Movement Y-axis 100 mm Movement Z-axis 575 mm Movement W-axis 585 mm Dljdjx Dcbpspfx Ab Tja Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper Mazak VDI Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 4.500 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2016, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, 593mm maximum cutting length, Dlsdpex Dk Ahofx Ab Tsa 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle, 12 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: like new (used), Year of construction: 2006, travel distance X-axis: 177 mm, travel distance Y-axis: 41 mm, travel distance Z-axis: 550 mm, spindle motor power: 15 W, rotational speed (min.): 5,000 rpm, total height: 2,065 mm, total length: 4,390 mm, total width: 1,741 mm, overall weight: 5,000 kg, CNC controller: Nakamura-Tome FANUC Capacity X-axis travel mm: 177,5 Y-axis travel mm: ± 41 Z-axis travel mm: 550 B-axis travel mm: 689 C-axis: 360º (0,001º) Turning length mm: 500 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 780 Bar work capacity mm: 51 Upper turret Tool holder: VDI-30 Number of tool slots St .: 12 Speed driven tools RPM: 3.600 Drive power driven tools kW: 5.5 / 3.7 Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 15 / 11 Maximun torque Nm: 47,2 Counter spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11 Equipment Chip conveyor Dljdpjx Dbxgjfx Ab Toa Part catcher Bar Loader RBK 10016 Milling function Working time hours Potencial nominal kVA: 31,43 Basic machine dimensions / weight Length mm: 4.390 Width mm: 1.741 Height mm: 2.065 Weight kg: 5.000

Condition: excellent (used), Year of construction: 2011, FANUC 32i A CNC control Spindle hours: 8,541h Technical details Swing over carriage: 800 mm Dodjwqpn Ejpfx Ab Tjla Turning length: 3,200 mm Swing over bed: 1,030 mm Standard turning diameter: 750 mm Spindle bore: 181 mm Bar capacity: 164 mm X-axis travel: 471 mm Z-axis travel: 3,235 mm Rapid traverse (longitudinal/transverse): 15 / 20 m/min Spindle speed: 3,000 rpm Spindle motor: 45 kW Turret: 12 / 6 BMT 85 Driven tool motor: 7.5 / 5.7 kW Driven tool speed: 3,000 rpm Total power requirement: 62.2 kVA Machine weight: approx. 22 t Dimensions: 7,357 x 2,710 x 2,590 mm Accessories: 12-position turret with driven tools Hydraulic tailstock Sandvik Capto C6 tool holders – 4 pcs Hydraulic chuck Ø630 mm SMW Autoblock Hydraulic steady rest (min. 110 mm, max. 530 mm) Video available

Condition: used, Year of construction: 2007, Doosan Puma 280LM Year 2007 Fanuc OiTC with Manual Guide C-axis with driven tools Dsdsx A Tzdjpfx Ab Tsla Turning length 1030 mm Turning diameter 420 mm Z-axis 1100 mm Spindle bore 76 mm Mounted SMW autoblock 315 mm chuck with 91 mm bore BMT 55 turret Tailstock Tool probe Chip conveyor Documentation Very good condition

Condition: good (used), Year of construction: 2005, Ref. -No.: 10475 Manufacturer: SPINNER Type: TC52-MC Year of construction: 2005 Type of control: CNC Control: Siemes 810 D ShopTurn Storage location: Halberstadt Country of origin: Germany Machine-No.: AN0XXXX Turning Speeds: 280/400 RPM Tool holder type: Stahlhalter 9 pcs. Turning Diameter: 280/400 mm Turning Length: 550 mm Tool Taper: VDI 30 Spindle Speed Max.: 5.000 RPM Turret places: 12 Pcs Further information: Three-jaw chuck: Schunk brand Driven tool stations Oil mist extraction Coolant system Dljdpsx A R U Isfx Ab Tsa Cabin, extraction Donaldson Tirit DCE Machine can be inspected under power by arrangement.

Condition: used, Year of construction: 2008, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 400 mm turning length: 1155 mm max. turning diameter: Ø 350 mm travel -x axis: 205 mm travel -z axis: 620 mm control: Fanuc OI-TC max. tool weight: 235 (with Tailstock) kg spindle passage: Ø 80 mm revolution per minute: steples U/min rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret - number of stations: 12 tailstock taper ISO: MK 4 mm tailstock quill stroke: 150 mm total power requirement: 45 kVA Weight approx.: 4,0 t dimension machine xH: 2,6 x 1,8 x 2,2 + Transformator m Equipment: -3-jaw chuck Ø 260mm with interchangeable jaws inside/outside -center point in tailstock -disk turret Ø 480mm -Hydraulic unit (40 liter capacity) -Coolant tray (80kg) -LOSMA exhaust air filter -Chip tray (30kg) -Chip conveyor (180kg) Dodpfx Aov Iplasb Tola Operation via control panel and foot switch Accessories various bar sleeves Ø 78mm (outside) various clamping rods 1x 4-jaw lathe chuck Ø 200mm TOS various clamping jaws various clamping fixtures *

Condition: good (used), Year of construction: 1999, Machine is in very good working condition. Dlsdpex Awnuofx Ab Toa

Condition: used, Year of construction: 1999, turning diameter 270 mm turning length 630 mm control SIN840D longitudinal slide -travel 745 mm cross slide - travel 200 mm spindle head DIN 55026 - Size 6 spindle bore 62 mm chucking diameter max. 315 mm rapid traverse X-axis 12 m/min rapid traverse Z-axis 20 m/min tailstock travel 112 mm tool turret - number of stations 12 workpiece weight max. 30 kg turning speed range 10 - 4000 U/min weight of the machine ca. 3 t dimensions of the machine ca. 2,75 x 2,75 x 2,10 m With SIEMENS SINUMERIK 840D control system, turret with driven tools, tailstock, chip conveyor, various tool holders. Dljdpex Avp Refx Ab Tea

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 300 mm, feed length Z-axis: 500 mm, FOR SALE CNC LATHE Twin-spindle lathe Brand: CMZ Model: TL20 S Year of manufacture: 2006 Djdpex Au R Hjfx Ab Tola CNC GE Fanuc Series 21i-TB Tool turret capacity: 12 stations Number of axes: 3 axes Working area: X: 280 mm, Z: 500 mm, B Working speed: 4,000 rpm and on sub-spindle: 5,000 rpm Spindles: 2 spindles

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: M60I/9034, Offer Number: M60I/9034 Dodpfx Aow N Dm Ejb Tjla Machinetype: CNC lathe Make: HAAS Type: TL-1 Constr. year: 2015 diameter range: 203 mm working hight: 279 mm cutting length: 762 mm Location: Germany

Condition: used, Year of construction: 2007, Technical details: Dlodpfex Aq Hwjx Ab Toa turning diameter: 220 mm turning length: 310 mm total power requirement: 17 kW weight of the machine ca.: 3,3 t dimensions of the machine ca.: 2,25 x 1,63 x 1940 m greates pass round over bed: 430 mm bore diameter: 45 mm centre distance: 687 mm slide travel radial ( X-axis ): 160 mm slide travel axial ( Z-axis ): 310 mm spindle turning speed range: 0-6.300 U/min

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 401182, Used machine in good condition, all the time maintained by machine producer. Still used for production, could be inspected anytime. Control system: INDEX C 200-4 Additional equipment: Bar Feeder - Schmid LM3200 Dimensions: 3750 x 1400 x 1750 mm (main unit) Technical specification: Dodpfx Ajvrh Unsb Tsla Number of spindles: 2 Spindle motor power: 29 kW Spindle bore: 52 (60) mm Turning length: 280 mm Maximum spindle speed: 5000 rpm Number of tool heads: 2 Tool head #1: o Number of slots: 8 o X axis: 90 mm o Z axis: 280 mm o Rapid traverse X/Z axis: 24/24 m/min o Feed force X/Z axis: 5500/5500 Nm Tool head #2: o Number of slots: 6 o X axis: 81 mm o Z axis: 80 mm o Rapid traverse X/Z axis: 16/24 m/min o Feed force X/Z axis: 8300/5500 Nm SALE IN EU / SWITZERLAND / UK ONLY.

Condition: excellent (used), Year of construction: 2011, XYZ Proturn SLX 355 ProtoTRAK CNC Gap Bed Centre Lathe ProtoTRAK SLX Control (2011) Max’ Distance Between Centres 1000mm Max’ Swing over Cross-slide 225mm Max Swing over Bed 360mm Spindle Bore 52mm Spindle Speeds 50 – 4000 rev/min Spindle Motor 5.75Kw Quick Change Tool Post Tailstock MT4 Tailstock Dia’ 75mm Dledpex D U Arefx Ab Tea Tailstock Travel 160m Manufactured | 2011 Supplied with: 3 Jaw Chuck Interlocking Chuck & Main Guards Machine Manuals 3 Toolholders (More available if required). TRAKing Constant Surface Speed Coolant Worklight Auto Lubrication For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79003 Machine Serial Number: SL281 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance X-axis: 214 mm, travel distance Z-axis: 508 mm, spindle motor power: 20 W, HAAS Servo Bar 300 bar feeder, controlled by a HAAS CNC with color LCD screen, September 2005, fully programmable hydraulic tailstock, tool presetting, collet chuck, automotive parts catcher, bolt-on turret, chip auger, spindle orientation. Dledpfx Ajx D Tmvob Toa Tools: boring bar holder, external clamping jaws, three-jaw chuck.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, GURUTZPE A-1200 CNC Lathe Brand: GURUTZPE Model: A-1200 CNC Year of manufacture: 2007 FAGOR 8055 TC CNC Distance between centers: 3000 mm Height: 565 mm Bore diameter: 150 mm Power: 37/56 kW Voltage: 400 V Frequency: 50 Hz Phases: 3 Main technical specifications: - Axes: 2 axes - X-axis travel: 600 mm - Spindle speed: 5 – 1,200 rpm - Main motor power: 22 to 30 kW - Spindle type: Hydraulic chuck - Tool holder type: European standard for heavy CNC lathes - Rapid traverses: 8 / 10 m/min depending on axis - Guideway type: Hardened prismatic guides - Floor dimensions (approx.): 6,000 × 2,000 × 2,000 mm Dsdpfx Asx Au D Teb Tsla

Condition: ready for operation (used), Year of construction: 1992, Immediately available ex-stock: CNC lathe Gildemeister Type CT 60 Year of manufacture: 1992 CNC control EPL 2 Turning diameter: 360 mm Turning length: 1000 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Travel X: 1100 mm Travel Z: 380 mm Dedjx D Avgjpfx Ab Tola Chuck: 250 mm Spindle bore: 108 mm Spindle speeds: 16 – 3150 rpm Drive: 30 kW Turret: 12-position Driven tools Rapid traverse: 10 m/min Tailstock: MK 5 Quill stroke: 180 mm Accessories: Jaws Chip conveyor Weight: 6.5 t Price: €6,500 plus VAT, ex-works

Condition: used, Year of construction: 2001, Technical details: turning diameter: 220 mm turning length: 700 / 665 mm total power requirement: 17 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2,63 x 1,98 x 1,94 m greates pass round over bed: 430 mm Djdpfx Absx Aq Hke Tjla Part length max.: 510 slide travel radial ( X-axis ): 160 mm bore diameter: 45 mm

Condition: new, Year of construction: 2015, 2-spindle 2-turret machine, max. spindle speed 6000 RPM, with feeder (vibrational bowl), robot handling unit and post-process measurement unit. Control system Fanuc. Dimensions 2400 x 1650 x 1790 mm ( main unit ). SALE IN EU / SWITZERLAND / UK ONLY. Dlodpfx Aelgy U Eob Tea