Used Cnc Saw for sale (13,828)

Condition: used, Year of construction: 2004, machine/vehicle number: M275603, functionality: fully functional, travel distance X-axis: 6,200 mm, Emmegi, Twin Electra Sun TU/6 CNC twin head mitre saw. Cutting lenght: 6200mm Blade 500mm Pedpsxrg R Rofx Amyogp

Year of construction: 2003, condition: ready for operation (used), A fully automatic metal band saw Kasto with roller conveyors is available. Mitre min./max.: -45°/60°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: approx. 2910mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 1500mm/1850mm/1500mm, weight: approx. 900kg, control: Kasto BasicControl. Certain parts of the machine are defective. An on-site inspection is possible. Psdpfsycwrhox Amyogp

Year of construction: 1999, condition: ready for operation (used), Saw blade diameter: 350mm, cutting range at 90°: round: 110mm, square: 85mm/85mm, flat: 180mm/85mm, cutting range at 45°: round left/right: 105mm/110mm, square left/right: 85mm x 85mm/85mm x 85mm, flat left/right: 130mm x 85mm/130mm x 85mm. Saw blade bore: 40mm, speed: 74rpm, working height: 925mm. Dimensions X/Y/Z: 1150mm/1500mm/2100mm, weight: approx. 500kg. Psdpstufcdefx Amysgp

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: ADS550×5000, Power supply: 380–420 V / 50 Hz Total power: 5.5 kW Saw motors: 2 × 2.2 kW Saw blade: Ø550 mm Max. cutting length: 5000 mm Min. cutting length: 360 mm at 90° Cutting angles: 45° and 90° Repeatability: ±0.1 mm Air consumption: 60 L/min (0.5–0.8 MPa) Fully CNC controlled Two saw heads that can operate independently or synchronously Pgodpex R U Epsfx Amyep Automatic positioning of the moving saw head via servo drive Automatic height measurement system for increased precision at 45° Touchscreen control with clear interface Integrated label printer (traceability & workflow) Infinitely adjustable saw feed Very stable and heavy machine base

Year of construction: 1998, condition: used, SECOND-HAND CNC CONTROL COPYING BAND SAW MZ UNIDUE 013 - NUM control - n. 3 cnc axis - cutting section 1300x800 h 100 mm Pgsdpfx Aoimwtromyep - angle of cut 90°+/- - wheels diameter 900 mm - volt. 380/50 - s/n 06 - CE rules (year 1998)

Year of construction: 2013, condition: ready for operation (used), Saw blade dimensions: 41mm x 5100mm, max. cutting diameter: 350mm, dimensions X/Y/Z: 4400mm/1800mm/2000mm, weight: approx. 2400kg. Psdpfx Ametufcaeyogp

Condition: new, Year of construction: 2026, Width of the band swa blades 50-200 mm Sharpening pitch 60 mm Weight 750 kg WINTER CNC BAND SAW GRINDER BANDSAWMAX PNK-CNC PNK-CNC is designed to grind all types of band saw blades used in metal cutting. PNK-CNC guarantees a flawless, fast and precise grinding of NU, NV, PV, PU, KV, SB tooth forms with its state-of-the-art grinding technology Technical specifications: - Band saw width 50-200mm - Band saw length Max. 12m - Blade thickness Min 0.4mm - Tooth pitch Max. 60mm - Tooth depth Max. 30mm - Tooth forms NU, NV, PV, PU, KV, SB Hook angle (0°) (+40°) - Feed rate (speed controlled) Max. 90 teeth/min. - Grinding wheel dimensions D: Ø250mm d:Ø20mm - Grinding wheel thickness 5-13mm (depending on tooth pitch) - CBN Grinding wheel dimensions D: Ø250mm d:Ø20mm - CBN Grinding wheel thickness 2-3mm (depending on tooth pitch) - Grinding wheel rotation (speed controlled) 1400-5500 r.p.m. - Grinding wheel motor power 1,10kW - Coolant type Water emulsion(bakalite wheel) / Oil (CBN wheel) - Coolant motor capacity 70 lt/min. Coolant pressure 10 bars. - Coolant container capacity 80lt. Motor quantity 6 - Connected load 3,6kW - Voltage 400V, 3Ph, 50-60Hz - Dimensions 1550*2000*1550mm (saw blade unmounted) - Net/gross weight 750/800kg PNK-CNC at a glance: - 2 axes Servo motor controlled. - Operating screen in any language. (please state the required language in order) - Downloading a program through internet if demanded. - LCD screen control panel. - Language selection on the control panel. - Tooth form selection from the control panel. - Grinding all common tooth types. - Possibility of saving grinding programs of the blades ground. - Following the hook angle from the control panel. - Indexing by servo motor. Podpfx Asyk Icasmyogp - Absolute tooth pitch accuracy. - Variable grinding speed. - Variable grinding wheel rotation speed. - Grinding head riding on linear rails. - Optionally wet or dry grinding. - Grinding by CBN wheel or DIA wheel. - Water emulsion/oil coolant [for CBN grinding]. - Central lubrication. - Integrated light unit. - Separation of electronic and grinding areas. - Included band saw carrier legs. - Motor controlled band saw vertical movement. - Steady mechanic blade clamp. - Enclosed cabin for operator safety. - Ergonomic machine construction for ease of loading and unloading. - Simple controls for ease of use. - Rigid machine construction. - Production conformed with CE standards. OPTION: - full cover EUR 2.500,-

Condition: good (used), Year of construction: 2017, Multi-Sheet Machining For Maximum Output Automatic Loading System CNC Bandsawing, Routing & Drilling CNC Control Of The Bandsaw Movement +/- 90 Degrees The MZ Pluris is recognised as the machine of choice for all sofa and chair frame manufactures. The machine can work with OSB, Plywood, MDF, Chipboard (good quality), solid wood and also some composite materials. Pedpfxstqfv Ij Amyegp It has a number of key advantages over standard CNC nesting machines that include the possibility to stack multiple sheets high eg 5 x 12mm thick sheets, thanks to the use of the bandsaw sheet yield is much better, no vacuum is used so the machine is able to cut small shaped parts without difficulty and lastly cut parts are coming off on to the side discharge conveyor as the machine is still working, thus maximising machine output. Increased working capacity of 2550mm 1550mm Sheet size = 1220 x 2,440mm (8' x 4 ') and 1525 x 1525mm Standard equipment / features: CNC bandsaw specification - Maximum depth of curve 800mm - Minimum radius of cut 50mm - Maximum cutting height 100mm - Automatic angling of blade +/- 90 degrees - Blade size 5900 x 13mm - Automatic sawblade tensioning - Cast aluminium saw pulleys 900mm dia - Self braking motor 11kw CNC router specification: - Maximum working height / cutting depth 60mm - Electro spindle power S6 9KW - Variable rotation speed 7000 - 24000 rpm - HSK 63F tool holder Fence / grippers / supports: - Programmable pusher fence with 6 x pneumatic panel grippers - 8 x panel support arms General: - Automatic centralised lubrication system consisting of 3 x oil pumps - Internal conveyor belt for removal of dust / waste cuts - Free standing electrical control cabinet with PC and keyboard - Hand held remote control CNC vertical drilling unit: - Maximum drilling depth 70mm - 5 x independent drilling spindles in line. (Drills not included). - 1.7kw motor Plus package: - 5 position automatic tool changer - Automatic movement of clamps and support arms - set through the program Lifting table: - 4 screw - Capacity 2550 x 1525mm - Max load capacity 3000kg approx - Max panel pack height 700mm - PIT REQUIRED Year - 2017 CE Serial nr - 22/2017

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 330 mm, cutting width (max.): 330 mm, control type: CNC control, actuation type: electric, rotational speed (max.): 85 rpm, rotational speed (min.): 34 rpm, total height: 1,400 mm, total length: 2,150 mm, total width: 2,000 mm, overall weight: 1,499 kg, table height: 650 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, CNC COLUMN TYPE METAL BANDSAW M2-330C The MTP 330×330 Column Type Metal Bandsaw is a professional cutting machine designed for manufacturing facilities, metal workshops, and steel processing companies. Thanks to its rigid column construction, efficient hydraulic system, and large cutting capacity, the machine delivers excellent cutting accuracy, reliability, and operator comfort. The column-guided design ensures stable movement of the saw frame, resulting in precise cuts and extended blade life. The machine is ideal for cutting profiles, pipes, shafts, bars, and solid materials made of structural steel, stainless steel, aluminum, and other non-ferrous metals. MAIN ADVANTAGES • Rigid column-type construction • Maximum cutting capacity: 330 × 330 mm Psdpfxozd T H Ao Amyegp • Hydraulic feed system • 4 blade speed settings • Efficient coolant system • High cutting accuracy and repeatability • Designed for continuous operation • CE certified PRECISE CUTTING The rigid construction and professional blade guidance system ensure high-quality cutting results while reducing material waste. The hydraulic feed allows smooth adjustment of the cutting process according to the type and size of the material being processed. POWERFUL DRIVE SYSTEM The bandsaw is equipped with a 4 kW main motor and a 0.75 kW hydraulic power unit, ensuring reliable performance even when cutting large material sections. COOLING SYSTEM An integrated coolant pump with a power output of 60 W effectively removes heat generated during cutting, extending blade life and improving cutting quality. APPLICATIONS • Steel profiles • Round and rectangular tubes • Solid bars • Steel shafts • Structural components • Stainless steel • Aluminum and non-ferrous metals Thanks to its large cutting capacity, the machine is suitable for both single-piece and serial production. SAFETY The machine is equipped with protective covers, safety switches, and CE-compliant safety features to ensure safe operation in accordance with European standards. TECHNICAL SPECIFICATIONS Maximum cutting capacity: 330 × 330 mm Blade speed: 34 / 51 / 60 / 85 m/min Feed stroke: 500 mm Blade size: 34 × 1.1 × 4115 mm Main motor power: 4 kW Hydraulic motor power: 0.75 kW Coolant pump power: 60 W Material feeder dimensions: 600 × 360 × 630 mm Working table height: 650 mm Weight: 1499 kg Machine dimensions: 2150 × 2000 × 1400 mm DELIVERY AND SUPPORT We organize machine transportation throughout Europe. We provide technical support, assistance with machine selection, and access to spare parts and service. CONTACT US If you require additional information or a personalized quotation, our specialists will be happy to assist you. We also invite you to explore our full range of metalworking machinery available on our website.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm Podpoznwu Sjfx Amyegp - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: excellent (used), 5-axis Year of production: 2018 Pgjdpoun Rqgjfx Amyep Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 2,100 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 400 mm, number of axes: 4, spindle motor power: 9,000 W, This 4-axis QUICK CNC UA 481 was manufactured in 2024. It features a 2100 x 3050 x 400 mm working area, a 9 KW HSD/HSK F 63 spindle, and a double layer vacuum table with 6 zones. Equipped with a Yaskawa servo motor and two Becker pumps at 250 m3/h each, it's ideal for advanced woodworking. Consider the opportunity to buy this QUICK CNC UA 481 CNC Wood Machining Centre. Contact us for more information about this machine. Pgjdjx E Efvepfx Amyep • Condition: New • Power supply: 380 V, 3-phase • Spindle: HSD, 9 kW, HSK F63 • Controller: NC Studio (German language) • Tool changer: Linear, 10 tools • Drives: Yaskawa servo motors • Table: Double-layer vacuum table, 6 zones Additional equipment • Vacuum system: 2 Becker vacuum pumps, 250 m³/h

Condition: like new (used), Year of construction: 2022, functionality: fully functional, operating hours: 4 h, input frequency: 50 Hz, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 1,250 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 180 mm, actuation type: electric, overall weight: 250 kg, Equipment: documentation/manual, We offer this like-new CNC-Technik ALM-1204-002 machining center, manufactured in 2022. Working area: 1,250 x 1,000 x 180 mm Country of origin: Germany Tangential unit preparation for the AL-M series Pedpfx Amozfwavsyegp Electronics upgrade with a 4th motor driver for controlling the tangential module or rotary axis Inductive tool length sensor AMB 1400 FME-P Technical specifications: Input power: 1,400 W Rotation speed: 5,000 ... 25,000 rpm Mounting to the portal: 43 mm mounting flange Collet: ER16 Weight: 1.80 kg Power connection: 4 m power cable Set of 3 ER-16 collets Collet dimensions: Vacuum table milled into the plate Grid spacing 20 mm Includes M6 threaded holes in the grid Vacuum pump TOPAS E101 V 2.2 kW (set) Oil-lubricated rotary vane vacuum pump DS motor, 2.2 kW 230/400 V 50 Hz IE3 Motor version with PTC (standard) Nominal pumping capacity 100 m³/h Ultimate vacuum 0.5 mbar (abs.) without gas ballast 1.5 mbar (abs.) with gas ballast Includes suction filter 1 1/4" and paper filter cartridge Flow rate 84 m³/h The drive operates on 180-watt servo motors and 16 mm ball screws. With this configuration, the maximum speed, depending on the spindle pitch and software, is 500 mm per second. The control system operates with ground and hardened roller guides featuring a gothic profile. If you have any questions or require further information, please write or call us.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: K03903KT601220260601, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cycut, controller model: 6000, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser source model: MFSC-3000, laser hours: 80,000 h, laser power: 3,000 W, laser wavelength: 1,080 nm, pipe diameter (max.): 110 mm, pipe length (max.): 6,500 mm, table length: 7,000 mm, table width: 1,200 mm, table height: 1,800 mm, workpiece weight (max.): 80 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, 1.This is Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine, equipped with MAXPHOTONICS MFSC-3000 3000W fiber laser source and BOCHU CypCut/HypCut professional tube cutting control system. 2.It adopts heavy-duty integrated welded bed with aging stress relief treatment, dual pneumatic self-centering front & rear chucks for stable clamping, short tail cutting design to improve material utilization. 3.The fully enclosed cutting cabin with integrated dust removal system realizes low smoke, low noise and laser radiation protection, meeting industrial safety and environmental standards. 4.Full closed-loop servo drive system ensures positioning accuracy ±0.04mm/m and repeat positioning accuracy ±0.03mm/m, maximum idle moving speed up to 120m/min, matched with water cooling chiller for stable laser output. 5.The machine supports cutting carbon steel, stainless steel, aluminum alloy, brass and copper tubes, compatible with round tube, square tube, rectangular tube, oval tube, angle steel and channel steel. 6.It can complete hole drilling, bevel cutting, intersecting line cutting and blanking in one process, ideal mass production equipment for metal pipe processing factories. Item Parameter Machine Model 6012 Two-Chuck Fiber Laser Tube Cutting Machine Laser Source Brand MAXPHOTONICS Laser Source Model MFSC-3000 Laser Power 3000W Wavelength 1080nm (±10nm) Pjdsza Rm Hepfx Amysgp Control System BOCHU CypCut / HypCut (Tube Special Version) Structure Horizontal Heavy Bed, Dual Pneumatic Chucks Processing Tube Length Max 3000mm Clamping Range Round tube Φ10–Φ120mm; Square tube 10×10–80×80mm Positioning Accuracy ±0.04mm/m Repeat Positioning Accuracy ±0.03mm/m Max Idle Speed 120m/min Cooling Mode Industrial Water Cooling Processable Materials Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper Supported Profiles Round tube, square tube, rectangular tube, oval tube, angle steel, channel steel

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: K03903KLC301520260601, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Shanghai BOCHU Electronic Technology Corporation Limited, controller model: CypCut, laser type: fiber laser, laser source manufacturer: Maxphotonics, laser source model: MFSC-1500、3000、6000、12000, laser hours: 80,000 h, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 10 mm, table length: 5,100 mm, table width: 2,400 mm, table height: 2,300 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 25 mm, travel distance X-axis: 3,020 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 95 mm, cutting speed: 110 mm/min, positioning speed: 140 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 1,000 kg, power: 3,000 kW (4,078.86 HP), input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, overall weight: 4,500 kg, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, 1.This is a fully enclosed single-platform fiber laser cutting machine equipped with 6000W MAXPHOTONICS original fiber laser source and BOCHU control system. 2.Adopting integral welded bed with aging stress relief treatment, the machine features high rigidity and long-term stability. 3.The full-enclosed protective structure realizes smoke removal, noise reduction and laser radiation protection, meeting environmental protection and safety standards. 4.With high-precision servo drive system and intelligent height tracking cutting head, the machine ensures accurate positioning and smooth cutting section. 5. It is widely used for cutting carbon steel, stainless steel, aluminum alloy, brass and copper plates, featuring low failure rate, easy maintenance, high efficiency and stable mass production performance. It is an ideal equipment for sheet metal precision processing. 6.Laser Source Brand: MAXPHOTONICS 7.Laser Source Model: MFSC-6000 8.Laser Power: 6000W 9.Wavelength: 1080nm (±10nm) Pgjdpfsza Rmyjx Amyjp 10.Control System: BOCHU CypCut/HypCut 11.Structure: Fully Enclosed Single Platform 12Positioning Accuracy: ±0.03mm/m 13.Repeat Positioning Accuracy: ±0.02mm/m 14.Max Idle Speed: 120m/min 15.Cooling Mode: Water Cooling 16.Processing Materials: Carbon Steel, Stainless Steel, Aluminum Alloy, Brass, Copper

Condition: new, Year of construction: 2026, machine/vehicle number: K09002KEP142020260601, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 200 mm, operating speed: 40 mm/s, reverse speed: 200 mm/s, table width: 500 mm, table length: 1,200 mm, table height: 1,150 mm, throat depth: 330 mm, ram plate length: 1,200 mm, clearance between the columns: 970 mm, retraction force: 40 t, total length: 1,340 mm, total width: 1,310 mm, total height: 2,170 mm, overall weight: 2,800 kg, control type: CNC control, degree of automation: automatic, actuation type: electric, Equipment: CE marking, safety light barrier, 1. Basic Information - Manufacturer: Jinan KaFe CNC; Model: KF-4012, self-developed proprietary design - Edge over hydraulic brakes: 80% energy saving, oil-free & eco-friendly, higher speed, precision & consistency - Applications: Cabinet, elevator, kitchen, solar, auto parts, home appliances & other sheet metal industries 2. Mechanical Structure 1. Frame: Full steel welded, FEA optimized, 5-face one-time machining for rigidity & long-term accuracy 2. Power Box: Heavy-duty ball screw + imported sealed bearings for stable bending load 3. Auto Compensation Worktable: Built-in deflection strips, dial fine-tune, standard reduction motor & scale 4. 4-axis Back Gauge: AC servo driven, auto collision avoidance during bending 5. Bending Dies: Quenched & ground, high tolerance accuracy, less secondary finishing, longer service life 6. Electrical Cabinet: Closed convection cooling, neat wiring, cantilever operation box; self-diagnosis, emergency stop & text fault alarm 7. Touch Screen: 5-wire type, over 10 million service cycles 3. CNC System (Taiwan SYNTEC) - 15-inch industrial touch screen, EMC & temperature tested industrial motherboard - Direct programming for simple bending tasks - Core intelligent functions: ±5μm repeated positioning (full closed-loop by grating/magnetic scale); auto back gauge calculation; mold library; one-time trial bend angle compensation; auto bending pressure calculation & overload alarm; continuous arc bending; password protection - System pages: Machining, Manual, Mold, Program, Compensation, Alarm, I/O Signals ## 4. Core Technical Parameters - Bending force: 400KN; Table length: 1250mm; C-type frame - Ram stroke:200mm; Max opening:500mm; Throat depth:330mm - Speed: Rapid/Return 200mm/s, Working 40mm/s - 6 controlled axes: Y1/Y2/X/R/Z1/Z2; Dual 11KW Y-axis servo, peak feed power 15KW - Overall size:1340×1310×2170mm; Weight:2.8T 5. Standard Core Component Brands - Control & servo: Taiwan SYNTEC - Switches: OMRON (JP); Grating scale: GIVI (IT); Electric parts: Schneider (DE) - Bearings: INA (DE); Linear guide: Fulei (DE); Timing parts: Shanghai Fulong - Y-axis screw & guide: Nanjing brand - Note: Equal-grade brands replaceable if original stock unavailable 6. General Advantages Pgjdoza Rm Tspfx Amyep - Mechanical: High rigidity, full closed-loop precision, auto deflection compensation, anti-collision back gauge, durable dies - Control: Intelligent process compensation, multi-safety protection, real-time fault diagnosis - Operation: Energy-saving, zero hydraulic oil cost, fewer secondary processes, high mass production efficiency

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic Pgodpfx Amowxmhloyjp 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: new, Year of construction: 2026, NEXT 3121 VECTOR 7 AI – CNC machining center for nesting with integrated artificial intelligence (NEXT.AI). Designed and manufactured in Poland. Robust, welded steel construction, heat-treated at 600°C, provides high vibration resistance and minimal deformation, ensuring exceptional cutting accuracy. WORKING AREA AND DRIVE - Working area: 2130 x 3130 mm (sheet format up to 2100 x 3100 mm) - Z-axis stroke: 250 mm - Max. X/Y travel: 80 m/min; working X/Y travel: 25 m/min; working Z travel: 12 m/min - NEXT ST 1 kW servo drives with absolute encoders and battery backup – no need for reference jogging - SHIMPO planetary gearboxes, precision rack and pinion, and linear guides SPINDLE AND TOOLS - NEXT 9 kW spindle, 24,000 rpm, HSK63 - HEMPOINT frequency inverter, NextS controller - Hybrid tool magazine: 12-position rotary + 12-position linear - Automatic tool length sensor with air blow - EA-32 tool holders, HSK63 collets TABLE AND VACUUM - 2-chamber, 9-section vacuum table with intelligent zone control - NEXT_V450 vacuum system with a capacity of 450 m3/h (7.5 kW), automatic vacuum regulation via frequency inverter - Material positioning using pins and alignment strips - Automatic central lubrication system for linear motion AUTOMATION AND AI - NEXT.AI assistant integrated with the operator panel – process optimization and G-code generation - CleanFlow – automatic cleaning of moving parts - AirJet Sync system – 4 nozzles to assist chip removal - NEXT LED LIGHT – status and machining progress indicator - VisionEdge 3.0 – 24-inch screen, 3 cameras, voice prompts - LIDAR safety sensors in the basic version CONTROL AND CONNECTIVITY - Touchscreen control panel, ABB electrical components - Built-in 5G modem – remote diagnostics and service - Wireless QUICK START remote and NEXT WATCH remote (smartwatch) - Handwheel with project simulation function - NextMonitor app (iOS) – remote monitoring 24/7, lifetime access SOFTWARE - CUT2DPRO nesting software (straight-line and curved optimization) INSTALLATION DATA - Power supply: 3x400 V + N + PE - Compressed air: 6-8 bar, 300 l/min - Dust extraction: 3000-8000 m3/h - Machine weight: approx. 4800 kg - Industrial cabling WARRANTY AND DELIVERY - Warranty: 36 months - Lead time: 8-12 weeks Pjdpozlz Rlefx Amyogp - Training at the customer's site, CE declaration of conformity - Fully modular machine – upgrade options available (infeed/outfeed table, drilling unit, labeling machine, unloading robot) even up to 4 years after installation ADDITIONAL OPTIONS (surcharge) - 5+4W 1.5 kW drilling unit and Hiteco TF.C.12V (12+4+2) drilling unit - Infeed/outfeed table, label printer/labeling machine - NEXT ROBO XT (Yaskawa GP180) robotic manipulator for automated unloading Manufacturer: NEXTCNC Sp. z o.o., Poznań, Poland.

Condition: new, Coolant mixer for Haas CNC machines. Pgodpfx Amezllbhoyjp

Condition: like new (used), Machine is in good condition,not used. Pgedpfxowfglks Amyop Laser head RAY TOOLS BM 110.

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg Pjdpfx Ameb A N Akjysgp

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available -Weight: 0.5 kg Pgsdpsb A N Alofx Amyop

Condition: good (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 300 mm, workpiece height (max.): 300 mm, table length: 2,500 mm, table width: 1,300 mm, We are offering this well-maintained CNC-STEP T-REX N-1325 CNC portal milling machine, manufactured in 2022. Manufacturer: CNC-STEP Model: T-REX N-1325 Year of manufacture: 2022 Condition: good Psdpfx Aezkp A Hjmyogp Travel range: 1300x2500mm Z-axis clearance: 300mm Milling motor: HQD spindle, Model GDF46-18Z/3.5 3.5KW, max. speed 18000 rpm Vacuum pump with 5.5KW power The milling machine operates smoothly and without any errors. A complete set of ER25 collets (3-16mm) is included. Mobile tool length sensor This year, the control PC was replaced because the old one could not be upgraded from Windows 10 to Windows 11. Dust extraction shoe, 3D printed. The original dust extraction shoe unfortunately broke several times, but it can be purchased from CNC-Step. Available from July 27, 2026. Inspection is welcome at any time. Shipping from warehouse, free loading.

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Psdsyh Hc Rjpfx Amyjgp

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Podpfxew R St Ne Amysgp