Used Cnc Machining Center for sale (66,713)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Hedpfx Ahow Nklhs Nong Weight 4200 kg Good condition

Condition: new, Year of construction: 2026, Gannomat ProTec - CNC through-feed machine for drilling, grooving and routing Short introduction: • Small footprint requirement, less than 3,3 m2 • Large (1000 x 5600 x 60 mm) and small (60 x 250 x 6 mm) workpiece dimensions • Gentle workpiece handling by air jets • Precision through double laser measurement and workpiece straightening • Fast processing through 21/23 drilling spindles • 21/23 drilling spindles for zero setting times • Stable grooving unit till 8,3 mm saw blade width • Strong routing unit 5,5 kW (S1), option • Automatic tool changer for routing unit, option CNC controlled DRILLING, GROOVING, ROUTING below 3,3m2 with high processing precision and zero setup time, this stands for the GANNOMAT ProTec. TECHNOLOGY: The massive processing unit is equipped with 13 vertical drilling spindles, 8 double-horizontal drilling spindles (6Y & 2X), 1 grooving saw in the Y-axis with 1 routing unit. This unit placement allows that all conventional drill / tools are in one seting and only need to be called up. This CNC-controlled machining center operates from the bottom and can work in the through-feed and back-feed mode to the operator. Steel working tables with air jets are the reference for horizontal drilling and in the combination of the massive workpiece clamping system and additional 4th axis at the drilling head, precision drilling is possible. A non-contact laser sensor is used for recognition of the actual workpiece edges (Top and bottom edge), this allows a automatic correction / adjustment of the drilling program. USERS: Hnsdpfxebiplre Ah Neg ProTec offers Hightech in technology and application and was developed as a entry-CNC-level-machine for small and medium companies on the one hand and on the other hand as a second machine to a

Condition: excellent (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: AA2/0001518, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 300 mm, nominal power (apparent): 10 kVA, controller manufacturer: SCM, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,200 mm, number of spindles: 2, number of slots in tool magazine: 12, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, SCM Record RD 110NTTVN CNC Machining Centre, Series: AA2/000518 Year 2008. In very good condition. X=6m, Y=1.2m, Z=300m/m. Currently running software for staircase production. 12 Position Tool Changer with 1 Extra Head. Rail & Pod machine with 8 Rails. Hsdpfxox Ek Rkj Ah Njng Can work in 2 Fields. Front Safety Mats, and Overhead Laser System. Fully tooled up with complete documentation. Overall size: 8m. x 2.4m. x 1850m/m (H) Weight : 5000kg. Can be viewed at: The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Video and Photos available on WhatsApp

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Model: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Operating hours: approx. 3,000 Travel X/Y/Z: 600 x 400 x 500 mm Tool positions: 20 Tool holder: SK40 Hnodpfx Ahowv Tm Ns Nsg Spindle speed range: 10,000 rpm Hexagon wireless probe Chip conveyor Spindle cooler ICS (internal cooling system) 101225ä

Condition: ready for operation (used), A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment. Hjdpfxsx Ecu Eo Ah Nsng

Condition: ready for operation (used), Year of construction: 2011, operating hours: 13,802 h, functionality: fully functional, machine/vehicle number: PRATIX Z2-27, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, overall weight: 2,000 kg, spindle speed (min.): 24,000 rpm, number of slots in tool magazine: 10, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Description TECHNICAL SPECIFICATIONS PRATIX Z2-27 AXES Usable working area X-Y-Z * 2,700-1,300-180 mm Axis travel X-Y-Z 3,060-1,735-250 mm Vectorial speed X-Y 60 m/min WORK TABLE Hnedpfx Ahsxgdc He Nog Type MF Alu grid table 1,225 – 2,750 Vacuum pump Becker 250m3 DRILLING UNIT F12 Vertical drills No.-rpm 12 (7X-5Y) – 4,000 MILLING MOTOR Power kW (HP) 7.5(10) Min - Max spindle speed rpm 1,500 – 24,000 Tool magazine in table No. 10 positions Installed power KVA 23÷28.5 Total machine weight 2,800 kg Price excluding VAT and tools

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door Hsdpfx Ahstrhq Hs Njng - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, workpiece length (max.): 6,175 mm, workpiece width (max.): 1,550 mm, workpiece height (max.): 300 mm, spindle motor power: 18,500 W, Homag CNC Machining Center BAZ 211/60/K Venture 21 XXL with 6 m working length, PowerEdge edge banding unit, renewed vacuum pumps, Windows 10, and WoodWOP 8.1, in very good condition: – Workpiece length 6000 – 6175 mm – Pendulum processing 2375 – 2550 mm – Workpiece width 1400 – 1550 mm – Maximum workpiece thickness 300 mm – Working height 950 mm (underside of workpiece) – Modernization I 2023: – 2 new rotary vane oil-lubricated vacuum pumps – Capacity 2 x 63 m³/h = 126 m³/h – Retrofit kit for separate cooling unit for main spindle – Modernization II 2024: – New machine PC with Windows 10 operating system – Upgrade to WoodWOP 8.1 – 4-axis CNC machining center – K console table – 10 consoles incl. front stops – 6 rear stops – 6 lift rails – 2 side stops each left/right/mirrored – 2 pneumatic connections per machining position – 2 vacuum connections for templates – C-axis with aggregate and electronic interface – Safety device with anti-slip mats – Main spindle 18.5 kW vector controlled – Liquid cooling for main spindle – 10+18-position disc tool changer: – 10-position disc changer moving with main spindle – 18-position disc changer moving with X-support – MPU drilling head 30 spindles V20 / H10 / S360° – MultiProcessingUnit with C-axis +/- 185° – 20 vertical high-speed spindles – 10 horizontal spindles – Grooving and separating saw 200 mm – PowerEdge 360° edge banding unit – Pickup station moving with X-support – Edge thickness 0.4-3 mm – Max. edge height 65 mm – 360° edge banding with butt joint – Pre-trimming station and single roller for PowerEdge – Hot air nozzle for edge banding unit – Combined flush trimming and finishing unit WD 60 mm – Flush trimming of edge overhangs – Finishing pre-milled edges – For use in main spindle – Probing for compensation of workpiece tolerance – 2 WPL radius cutter heads – 2 profile cutters for finishing unit – C-axis extension for Flex-5 unit – 10 LED position display systems for consoles – Optical LED display system – For positioning clamps and consoles – 4-fold configuration with 2 x 2 clamping positions – Separate vacuum systems – Detachable console for adjustable side stop – 2 additional side and longitudinal locating pins – 2 additional clamping consoles 1300 mm – 2 additional side and longitudinal locating pins – 2 additional lift rails for console table – 12 vacuum clamps 160x115x100 mm – 10 vacuum clamps 125x75x100 mm – Saw/drill unit with 2 spindles for tool changer – Saw blade diameter up to 240 mm – Side wall safety fence (left) – Rear safety fence – Side wall safety fence (left) – Year of manufacture 2008, single owner, very well maintained – Machine serviced regularly – No maintenance or repair backlog, no major defects Hjdpfx Ahsx Dzbzo Nsng – For sale ex location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and trial run possible by arrangement

Condition: excellent (used), Year of construction: 2004, functionality: not functional, machine/vehicle number: AA1/013950, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 300 mm, nominal power (apparent): 10 kVA, controller manufacturer: SCM, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,200 mm, number of spindles: 3, number of slots in tool magazine: 10, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, SCM Record 132 TVN CNC Machine Centre in very good condition. Hjdex Ekxzjpfx Ah Nong Fully tooled up and currently running software for staircase production. Rail and Pod Machine with 8 Rails. 10 Position Tool Changer with secondary head and Saw Unit. Can work in 2 fields, Front Safety Mats, Overhead Laser system. Full documentation available. Over all dimensions: 8m. x 2.4m. x 1850m/m (H) Weight About 6000kg. Ready packed for shipment. Can be viewed at The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Photos and Video available on WhatsApp

Condition: good (used), Stock number: 3057 Manufacturer: Deckel MAHO Year of manufacture: 1999 Model: DMU 60 E Machine number: 11080000273 Control: Heidenhain TNC 624 M Operating hours: 34,055 h Spindle hours: 8,787 h Table: 1,000 x 540 mm Table load capacity: 350 kg Travel distances (X/Y/Z): 600 – 525 – 500 mm Spindle taper: SK 40 Tool changer: none Speed range: 20 to 12,000 rpm Hnjdpfxsx Dtqbj Ah Nsg Spindle power: 10 / 15 kW Feed rate: 0 to 10 m/min Rapid traverse: 15 m/min Accessories: coolant system; 3D probe Condition: good Connected load: 26 kW Machine dimensions: 3,000 x 2,100 x 2,300 mm Weight: approx. 4.5 t

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: Well-maintained (ready for demonstration at customer site) Equipment and technical specifications: Console machine Working size X: 3,200 mm Working size Y: 1,470 mm Max. travel height Z: 325 mm Milling unit 7939, 6 kW (S6) Including laser pointer Including traveling disc tool changer 7996 with 18 positions Including stationary tool changer on the right side Including 7893 magazine for manual tool change position 8 consoles including 12 vacuum suction cups for 4-field machining 4 pneumatically raisable and lowerable loading aids Including hand control unit Hnedpfx Ahjxymfks Nog Including 3-field safety tread mats Including saw unit for sawing/grooving in X Including C axis 7997 Horizontal drilling units: 6 Vertical drilling units: 16 Double drilling spindle in X Heat exchanger for control cabinet cooling CAMPUS software for CNC machining centers Vacuum pump 100 m³/h Weight: approx. 4,450 kg The tools shown in the tool changer are not included in the scope of delivery! Availability: by arrangement Location: Rhineland-Palatinate

Condition: good (used), Year of construction: 2002, Machine is in good condition. Hjdpfx Ahotwpamo Nong Parts shown by hand not come.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10558 Manufacturer: YOU JI Type: HMC 1200 BP Year of construction: 2012 Type of control: CNC Control: FANUC Series 18i-MB Storage location: Halberstadt Country of origin: Taiwan X-Travel: 1800 mm Y-Travel: 1500 mm Z-Travel: 1360 + 990 mm B-Axis: 360 ° W-Axis: 700 mm Table Dimensions (Lengthxwidth): 1200 x 1400 mm Table Load: 5.000 kg Max. Tool Weight: 25 kg Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Spindle Speed: 30 - 3.500 RPM Numbers Of Pallets: 2 Hnsdpoxxpbxefx Ah Neg Further information: 4-axis simultaneous machining IKZ (internal spindle cooling) AKZ (external spindle cooling) Synchronized walking (rigid thread cutting) Renishaw RMP60 workpiece probe (radio) Number of pallet changers for automatic pallet change: 2 Size: 1200 x 1400 mm Tool magazine, number of tools: 60 The machine is currently in production and can be viewed by appointment.

Year of construction: 2022, condition: new, Offer on demand Hsdjiw Dgiopfx Ah Njng Machine is immediately available

Condition: as good as new (ex-display), Year of construction: 2023, Control : Sonstige Hurco Max 5 Spindle Speed : 12,000 U/min Power : 11 kW Holder : SK 40 Torque : 61 Nm In general Travel X : 660 mm Travel Y : 406 mm Travel Z : 508 mm Rapid traverse X/Y/Z: 28 m/min Hnodpfx Aelf E Aieh Nsg Table : 762 x 406 mm Table load : 1,500 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14599631, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, The tool measurement system and the touch probe were retrofitted in 2022 for a total of EUR 15,000. The machine is prepared for 4th and 5th axis operation! TECHNICAL DETAILS Travel X: 500 mm Travel Y: 350 mm Hnsdpfxex Agp Ij Ah Nog Travel Z: 610 mm Spindle speed: 18,000 rpm Spindle taper: SK30 Tool changer: 24 positions MACHINE DETAILS Operating hours Program run: 13,613 h Machine on-time: 39,034 h Control on-time: 38,758 h EQUIPMENT Connection and drives for 4th/5th axis 3D touch probe Heidenhain TS642 Tool measurement Heidenhain TT140 Spindle chiller unit Heidenhain HR410 electronic handwheel Approx. 30 tool holders Collets Complete documentation 3D touch probe

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Only 110 operating hours! Equipment and technical data: Travel ranges: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen panels Milling bed made of 19 mm MDF as sacrificial plate with guide rails and T-slot nuts for clamping. Chassis with reinforcements, filled with polymer concrete, designed for transport by pallet truck or forklift. Mechanical set consisting of profile rails including linear guides and ball screws (2010 and 1605) for all axes. Shaft couplings and high-performance grease for lubricating the carriages; also includes energy chains with connection sets. Control set comprised of a Triple Beast controller for controlling 3 axes, with Ethernet interface. Hodpfxsw Nadyo Ah Njng Leadshine drive for the fourth motor. Four stepper motors, 5.0A, 3Nm each with motor cables, as well as a 48V 6.7A switching power supply, LED board for breakout board, ribbon cable and proximity sensors; small parts such as wire leads, ferrules, control cables, heat shrink tubing, and cable lugs. Fully pre-installed in an aluminum enclosure including electrical kit and emergency stop. - 21.5 inch built-in monitor, including mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as mouse and keyboard, all pre-installed in an ergonomic console. Tool length sensor for determining tool length and adjusting the active reference point. Special equipment: - High-frequency spindle with 2.2 kW, including clamping nut, frequency inverter, line filter, brake resistor, and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solids Availability: short-term Location: Flörsheim

Condition: good (used), functionality: fully functional, travel distance X-axis: 2,400 mm, travel distance Y-axis: 3,600 mm, travel distance Z-axis: 420 mm, nominal power (apparent): 50 kVA, total height: 2,900 mm, total length: 12,480 mm, total width: 5,290 mm, table width: 2,200 mm, table length: 3,500 mm, spindle speed (max.): 8,000 rpm, spindle motor power: 10,000 W, Hello, we are selling a Breton CNC machine with 2 tables and automatic tool changer. The machine is still in operation and can be tested. We will dismantle the machine in January 2026. Hsdpfxox Af I Nj Ah Nsng

Condition: good (used), Year of construction: 2010, Ref. -No.: 10530 Manufacturer: DöRRIES - SCHARMANN Type: Alpha 1000 Year of construction: 2010 Type of control: CNC Control: Siemens SINUMERIK 840 D Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 2000 mm A-Axis: 0 - 90 x 0,001 ° B-Axis: 360 x 0,001 ° Number of T-slots: 1 + 8 Max. Workpiece Weight: 5000 kg T - groove width: 22 mm T - slot spacing: 100 mm T-Slots: DIN 650 mm Tool Taper: HSK - A 100 Tool Piece Magazine With: 207 + 10 Pcs./pcs. Max. Torque: 1250 Nm Hnjdpjxxpbfefx Ah Njg Feed Speeds X/Y/Z Axis: 1 - 30000 mm / min Rapid Travel X/Y/Z: 30,00 mm / min Drive Capacity - Spindle Motor: 45 kW Total Power Requirement: 100 kW Dimensions Of The Machine Ca.: 13 x 8 x 4,5 m Size Of Pallet: 2 x 1000 x 1000 mm Spindle speed gear stage 1: 1 - 1096 1 / min Spindle speed gear stage 2: 1096 - 6000 1 / min Further information: - Measuring probe - Chip conveyor - Coolant system - Coolant through the spindle - Pallets with 5-way media connection and clamping hydraulics - Extraction system - Swivel spindle A-axis 0 - 90 - NC rotary table B-axis

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1188877, Specification Table size 1016mm x 356mm X axis traverse 508mm Hnsdpfsx Afpgsx Ah Nsg Y axis traverse 406mm Z axis traverse 356mm Spindle BT40 Spindle speeds 0-10,000rpm Spindle motor 11.2kW Rapid feed rate 30.5m/min Toolchanger capacity 20 Tools Approximate weight 2313Kg   Machine Equipped with Haas CNC Control HRT 160 4th axis 11 off BT40 toolholders High flow coolant system Lighting Enclosed guarding Manual

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,500 mm, Next to new nesting CNC machining center Hedoxz Rfqjpfx Ah Nong 4-axis nesting CNC machining center. Purchased new in 10/2019. Has been used for less than 900 hours. The business for which the machine was acquired ceased due to the Corona pandemic, and usage has therefore been very minimal. The machine has been connected to an AL-KO extraction system, which is also for sale in a separate listing. Table size 3600x1500 mm. The machine can be used as a nesting table machine or, by removing the panel, vacuum pods can be used to raise the workpiece for machining. The machine is in full working order in all respects and is an excellent alternative to a new machine. Automatic 10-position tool changer, 2 x Busch rotary vane vacuum pumps (250 m³/h each). The work area can be divided into two separate zones. Drilling unit for vertical and horizontal drilling. Slot saw. Automatic tool height measurement (enables processing the same job with several tools without noticeable height differences). Supplied with bSolid software in Finnish. Suitable saw aggregate and planer aggregate also available for sale. The machining unit features collision sensors, so safety fencing is not required. The buyer is responsible for all costs related to relocation, including the preparation and transport of the machine (these services can be arranged, for example, through the machine's importer).

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm Hnedpfxst Ac Efo Ah Nsg A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing Hnedowka Upspfx Ah Nog - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: ready for operation (used), The machine is fully operational. All five axes operate simultaneously. Hnsdpfx Ajxzvn Doh Njg For further information, please contact via WhatsApp, email, or message through Machineseeker.

Condition: repair required (used), For sale is a UVA 725 Plus, year of manufacture 2011, a compact and exceptionally robust vertical CNC machining center from the Hommel-Unverzagt Group – equipped with a Heidenhain TNC 620 control system and SK40 spindle taper. The machine was in production until recently, but currently does not boot fully due to a control error (CC unit). Technical Data Travels: X-axis: 725 mm Y-axis: 460 mm Z-axis: 460 mm Spindle: Speed: 10,000 rpm Tool holder: SK40 Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool magazine: Capacity: 24 slots Tool change time: approx. 2 s Table: Dimensions: 760 × 420 mm Max. table load: 400 kg Machine dimensions (L×W×H): approx. 2200 × 2100 × 2300 mm Weight: approx. 3600 kg Condition & Fault Description: The machine was running flawlessly until recently but now displays various axis configuration and CC/PLC errors at startup: Heidenhain TNC 620 errors include: - “Timeout during processing of CC command” - “The PLC program has been stopped” - “HSCI initialization faulty” - “HSCI Ethernet connection interrupted” - “Configuration of axis X/Y/Z/S faulty” The Command/Control unit (CC) has already been replaced, but the error persists. Therefore, the machine is offered as defective / for repair or as a source of spare parts. Accessories & Scope of Delivery: - Several SK40 tool holders (various sizes, collet chucks, end mill holders, etc.) - Chip conveyor (complete unit) - Machine frame / chip drawer / collecting trays - Hydraulic unit / coolant pump - Machine documentation Documentation includes: Hnsdpfxsxzvnwe Ah Neg - UVA 725 Plus Parts Manual - Operating Manual Heidenhain TNC 620 - Delivery / Preparation / Installation Guide (UVA 550–1600) - Heidenhain TNC 620 User Manual (large folder) Machine Data (according to nameplate): Model: UVA 725 Plus Serial number: 71L1261109 Year of manufacture: 2011 Manufacturer: Hommel Unverzagt GmbH Weight: 3800 kg Manufactured for Hommel Unverzagt in Taiwan