Used Cnc Machining Center for sale (66,880)

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Iedpfx Ajt Ac Efeh Neht Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: ready for operation (used), The machine is fully operational. All five axes operate simultaneously. Ijdpfxoxzvn Dj Ah Njht For further information, please contact via WhatsApp, email, or message through Machineseeker.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2011 Type of control: CNC Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Isdpfxsxvw I Ij Ah Nsht Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg Ihedpfx Aewz I Acsh Nst The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Condition: Function tested Equipment and technical data: Milling unit: 4.4 kW Tool holder: HSK 63 F Speed: 1,000 - 18,000 rpm Water-cooled Tool changer: 4-position, lateral Drilling head: 9 vertical drilling spindles on a 32 mm pitch Horizontal drilling spindle: 1+1 Vertical drilling spindle: 1+1 Grooving saw in X-direction Control: Twin CAM 32 Vacuum pump: 40 cbm/h Including vacuum suction cups Travel paths: X-axis: 2,685 mm Y-axis: 1,095 mm Z-axis: 140 mm Weight: approx. 3,500 kg The machine is completely checked for all mechanical, electrical, and electronic components and overhauled where necessary. All guides checked; console guides replaced New PC control system for the TWIN CAM control All axis modules checked and serviced Location: Flörsheim Availability: by arrangement Ihedpfxew I Ug Hs Ah Net

Year of construction: 2025, condition: new, XX100292 New CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock and ready for shipping Ijdjiv Imnepfx Ah Njht Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: good (used), Year of construction: 2010, AWEA 1250, Ihjdpfx Ahsxu Ew Ue Not 15.000 rpm coolant thru spindle, Tool changer 40 places Parts shown by hand not come. Machine vices, plate on table not come with machine.

Condition: repair required (used), For sale is a UVA 725 Plus, year of manufacture 2011, a compact and exceptionally robust vertical CNC machining center from the Hommel-Unverzagt Group – equipped with a Heidenhain TNC 620 control system and SK40 spindle taper. The machine was in production until recently, but currently does not boot fully due to a control error (CC unit). Technical Data Travels: X-axis: 725 mm Y-axis: 460 mm Z-axis: 460 mm Spindle: Speed: 10,000 rpm Tool holder: SK40 Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool magazine: Capacity: 24 slots Tool change time: approx. 2 s Table: Dimensions: 760 × 420 mm Max. table load: 400 kg Machine dimensions (L×W×H): approx. 2200 × 2100 × 2300 mm Weight: approx. 3600 kg Condition & Fault Description: The machine was running flawlessly until recently but now displays various axis configuration and CC/PLC errors at startup: Heidenhain TNC 620 errors include: - “Timeout during processing of CC command” - “The PLC program has been stopped” - “HSCI initialization faulty” Iodpfx Aoxzvnwjh Nsht - “HSCI Ethernet connection interrupted” - “Configuration of axis X/Y/Z/S faulty” The Command/Control unit (CC) has already been replaced, but the error persists. Therefore, the machine is offered as defective / for repair or as a source of spare parts. Accessories & Scope of Delivery: - Several SK40 tool holders (various sizes, collet chucks, end mill holders, etc.) - Chip conveyor (complete unit) - Machine frame / chip drawer / collecting trays - Hydraulic unit / coolant pump - Machine documentation Documentation includes: - UVA 725 Plus Parts Manual - Operating Manual Heidenhain TNC 620 - Delivery / Preparation / Installation Guide (UVA 550–1600) - Heidenhain TNC 620 User Manual (large folder) Machine Data (according to nameplate): Model: UVA 725 Plus Serial number: 71L1261109 Year of manufacture: 2011 Manufacturer: Hommel Unverzagt GmbH Weight: 3800 kg Manufactured for Hommel Unverzagt in Taiwan

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Ihodpfoxvw Izox Ah Nst Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2009, Internal Article No.: 25040 CNC Machining Center Müga A7040 Year: 2009 Control: Mitsubishi + 4th axis + ICS (internal coolant supply) / filtration system / extraction system + NC clamp Röhm RKE-125L Ijdpfx Ahswy U Ebo Noht + SK40 tool holders Spindle: SK40 Spindle speed: 12,000 rpm 24-position tool changer Travel paths: X 700 / Y 400 / Z 550mm Dimensions (approx.): LxWxH 270 x 210 x 270cm Weight: approx. 4t

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data: Nesting system with grid table Processing dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Traverse paths: - X: 5665 mm - Y: 1650 mm - Z: 325 mm with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc tool changer with vacuum pump 250 m³ with handheld control device Ihsdpfxjwka Ipo Ah Not with central lubrication with minimum quantity lubrication system Availability: short-term Location: Röllbach

Year of construction: 2024, condition: new, XX100329 CNC Machining Centre with 3 axes and worktable with pneumatic positioning at 0°/90°/180° FOM INDUSTRIE FMC 120 Machine in stock and ready for shipping Standard configuration: - Servo-ventilated three-phase spindle motor 3 kW, regulation of spindle rpm by numerical control - inverter (1000/17000 rpm) - 6 position tool-holder for manual change with pneumatic locking (ISO 30) - Pneumatic rotation of the work table 0° to 90° to 180° - Mobile control console with PC, 24'' - No.4 pneumatic vices with manual positioning and double pressure with safety valves - Manuallly adjustable profile reference stops on right and left of work table - Minimum quantity lubrication (MQL) with pure oil - Perimeter safety casing on 3 sides and retractable front door - FST CAM 4 program Optional equipment installed on the machine: - PR204851 5-position automatic tool magazine (ISO 30) - PR207680 4-vice Easy-to-Set configuration: • Transformation of standard vices into vices with automatic movement and pneumatic locking • 2 retractable pneumatic side stops • SW for vice positioning - PR-28965 Beam rotation stop for intermediate angles with manual adjustment - PR204833 External stop with tunnel Iodpehlkqpsfx Ah Neht - PR202971 Data import software for data in accordance to FOM protocol with wireless bar-code reader - PR-27602 Tool set for aluminium - QN-28849 ISO 30 cone with milling cutter Ø 75 mm thickness 6 mm for end milling

Condition: ready for operation (used), Year of construction: 2005, Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement. Ihsdpsxyk S Isfx Ah Nst

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Chip conveyor, Bar feeder interface, Tooling, EIA ISO, Rigid tapping Ihedpfxoxykpao Ah Nst

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 Ihjdpfx Aexvw Hqsh Nst - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: new, Year of construction: 2024, machine/vehicle number: MR005606, High-performance CNC panel nesting machine. Applications within interior construction, furniture production, plastic processing or milling of other types of sheet material. Machine equipped with the most modern and user-friendly Easy2Go software.Machine is equipped with the following options: - 12ML drilling unit - Hood main motor adjustable in height - Reference stops on the front side - Automatic tool length control - Automatic lubrication system - Nesting free-form software + label - Milling spindle 9,5 kW (S6) - 2 working areas (X) with reference stops Technical specifications: - Maximum panel thickness : 100 mm - Maximum panel length : 3686 mm - Maximum panel width : 1555 mm - Machine table : Flat nesting table - Safety system : Bumper protection Iedpfxjtvm S Hj Ah Nsht - Number of vertical drilling spindles : 7 pieces - Power milling motor : 9,5 hp - Milling spindle change : HSK63F - Tool changer positions : 10 piece - Milling spindle speed : 24000 /min - Tool length measuring system : Yes - Serial number : AH00006548

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: 0 - 250 - 04 - 0558, Technical data : X working area 2,500 mm Working area Y 800 mm Iedpforwmwfjx Ah Neht Z working area 40 mm Number of milling spindles 2 Vertical drilling spindles 16 Drilling spindles in X axis 2 Drilling spindles in Y axis 1 Vacuum pump Machine table traverse table Weight approx. 3,500 kg CNC drilling and milling center WEEKE BP 10 , built in 1991. Panel area 5,200 x 1,500 mm. Machining area 2,500 x 800 mm, 16 vertical drilling stations, 1 keyway saw, 2 milling units, support plate handwheel and hydraulic unit. In 2016 he switched to Linux CNC 3D - new computer, new monitor, new software.

Condition: good (used), Alzmetall BAZ 15 CNC – Vertical Machining Center • 3 axes • Heidenhain control For sale is an Alzmetall BAZ 15 CNC, a compact and robust vertical machining center equipped with a Heidenhain control system. The machine is still operational and can be inspected under power. It is in well-maintained, technically flawless condition. Technical Data Manufacturer: Alzmetall Model: BAZ 15 CNC Application: Milling Machine type: Vertical machining center Control system: Heidenhain Weight: 3,200 kg Table load: 500 kg Axes: 3 X travel: 600 mm Y travel: 400 mm Z travel: 600 mm Spindle speed: 9,000 rpm Tool magazine: 24 positions If interested, simply write or call. Ihjdpfjxxxu Usx Ah Njt

Condition: ready for operation (used), Year of construction: 2010, Offered is a Röders RXP 300 high-speed machining center, year 2010, machine hours approx. 120648h, spindle hours approx. 71200h, HSK-25 high-frequency spindle 50000rpm, HG sensor, high-accuracy package incl. spindle cooling, Renishaw probe, bar magazine with 18 tool stations. An inspection is possible by appointment. Ihjdpfexyk Tfsx Ah Not

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Options: Steady rest SMW K4 steady rest Iedpsxyf Udofx Ah Njht Chip conveyor High-pressure pump 15 bar Tool Eye Tailstock EIA/ISO Overload detector Synchronized tapping Tooling

Condition: good (used), Year of construction: 1996, Parts shown by hand not come. Machine have 2 spindles. One for 6.300 min-1 SK 40 Second up to 42.000 min-1 HSK E40. Isdjruauqspfx Ah Njht Spindle replaced 2018.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 103, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm A-axis: 110° C-axis: 360° Tool holder: ISO25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 MACHINE DETAILS Control: NUM 1060 Ihodpfx Ahoxtm Nvo Njt Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg EQUIPMENT Various tool holders Operating manual / Electrical schematic

Year of construction: 1997, condition: used, Year of manufacture 1997 Serial number 9937 Working area X 3100mm Working area Y 600mm Working area Z 850mm Ihedpfx Ahemhf E No Njt Main motor 4 x 5Kw 5-axis machine Number of milling spindles 4 Number of revolutions max 1800 1 table 3000mm x 550mm

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 106, travel distance X-axis: 740 mm, travel distance Y-axis: 185 mm, travel distance Z-axis: 220 mm, controller model: NUM 1060, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 740 mm Travel Y: 185 mm Travel Z: 220 mm A-Axis: 110° C-Axis: 360° Tool holder: ISO 25 Spindle speed: 50–12,000 rpm Minimum resolution: 0.001 MACHINE DETAILS Control: NUM 1060 Connected load: 10 kVA Dimensions & Weight Dimensions (L x W x H): 2,215 x 2,500 x 2,650 mm Machine weight: 3,550 kg Ihjdpfx Ajxtm H Ieh Nst EQUIPMENT Renishaw probing system Various tool holders Operating manual Electrical diagram

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: TOR4 044, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 12,000 rpm, number of axes: 4, TECHNICAL DETAILS Travel X: 700 mm Travel Y: 400 mm Travel Z: 550 mm Spindle type: SK40 Iodpsxtm Dyofx Ah Nsht Spindle speed: 12,000 rpm Tool changer: 24 stations MACHINE DETAILS Control: Mitsubishi Dimensions & Weight Dimensions (L x W x H): 2700 x 2100 x 2700 mm Weight: approx. 4,000 kg EQUIPMENT 4th axis Internal coolant supply (IKZ) Filter system Extraction unit NC clamp Rhm RKE-125L SK40 tool holders