Used Cnc Flame Cutting Machine Plasma for sale (66,809)

Condition: used, functionality: fully functional, working width: 2,100 mm, working length: 3,100 mm, Ziener oxy-fuel cutting system with Kemper extraction table 2100x3100mm and Kemper extraction unit type 810700090. The system has 3 cutting torches, is fully operational, and can be inspected under power. Pgsdpfx Aheyryrijvsi

Condition: excellent (used), Plasma cutter SAF Nerta Zip 20-40 A Type 0408_2240 380 Volt 10/18 A 220 Volt 16/30 A Cutting current 20/40 A Transport dimension : Length 700 mm width 430 mm Pjdpfxovdqkvo Ahvegi height 970 mm Weight 90 kg

Condition: used, Plasma cutter CLOOS type CPS 40/80 Year of manufacture 1990 Power at 60 % ED 80 Amp. Power at 100 % ED 40 Amp. Adjustment range 40 and 80 Amp (2 steps) cutting capacity with steel max. 25 mm Hose package length 5.5 meters Pgedpfx Ahjdzqccjvoi Mains connection 400 Volt with 32 Amp. Plug - Hand torch CLOOS dimension L x W x H 700 x 600 x 750 mm weight 160 kg good condition

Condition: used, Plasma cutting unit MB - Welding Technology Type Plasmaprof 50 Equivalent to CEBORA Machine no. 244311 Year of manufacture: approx. 1992 Pgodpfx Aedzqa Hshvji Power: 50 A = 35% duty cycle 30 A = 100% duty cycle Adjustment range: 2 steps Torch hose length: approx. 6 meters Compressed air connection: 4.7 bar Power supply: 400 Volt, 50 Hz, 32 Amp plug Installation dimensions (L x W x H): 500 x 350 x 700 mm Weight: approx. 80 kg Good condition

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Machine has very low hours Pgjdsv Iaqyepfx Ahvji

Condition: used, Year of construction: 2012, functionality: fully functional, Messer Cutting Systems Multitherm 4000 - Oxy-fuel Working area: 2500 x 15000 mm 1 Global Control Plus CNC controller 50 m network cable 1 cooling unit for control cabinet 4 laser diodes 6 drives 1 heat shield (without air cooling) 1 heat shield (without air cooling) 20 m track 1 OmniFlow oxy-fuel supply, 100 cbm 1 compressed air supply on the machine 1 distributor block for compressed air purging 1 oxy-fuel take-off point with pressure regulator 1 take-off point for compressed air 4 ALFA machine cutting torches 4 compressed air purges for ALFA 4 torch suspensions OL 200 N 4 Sensomat Alfa 20 m energy supply via energy chain 1 emergency pull cord (front) 1 emergency pull cord (rear) Pgodpfx Ajynzfpehvsi 2 wheel well safety devices Including tables and rails

Condition: used, Year of construction: 2013, table width 6000 mm table length 2000 mm burner heads 1 Pjdpfxoyk Dgzo Ahvegi Equipment: - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Working area 4000 x 2000 mm Pjdpoykulnjfx Ahvegi Cutting power 4000 bar

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. Pgedswinpxepfx Ahvsi MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected under power in Vilnius.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 286.001.911.20, working width: 3,000 mm, working length: 6,000 mm, controller model: Global Control S mit 15 Zoll Farb-Touchscreen, No minimum bid – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 6,000 mm Number of cutting torches: 2 Gas flow regulation: available MACHINE DETAILS Installation footprint: 9,000 x 5,000 x 2,000 mm Control: Global Control S with 15-inch color touchscreen Electrical Data Voltage: 3 x 400 V PE/N Frequency: 50 Hz Power: 9 kVA ATTENTION: The Zinser cutting bed is not included in the offer! Pgedpfx Ajyi Ub Hehvoi EQUIPMENT according to the original invoice – details provided without guarantee Joystick and handwheel for Global Control S panel Cooling system for the control cabinet Laser diode Heat shield plate without air cooling Track for double-sided longitudinal drive HEB 9 m OmniFlow oxy-fuel supply up to 70 m³/h ALFA machine cutting torch with internal ignition SmartLifter 200 SensoMat ARKI Full gas addressability Light barrier systems Safety device: wheel arch foot switch Energy supply via 9 m energy chain for oxy-fuel Drag chain driver Further technical data from the manufacturer – details provided without guarantee: Track gauge: 4,000 mm Chain height: 500 mm Positioning speed: 50 m/min Operating speed: max. 35 m/min Dimensions & Weight Dimensions (L x W x H): 1,940 x 5,070 x 1,980 mm Machine weight: 2,200 kg

Condition: used, Year of construction: 1987, functionality: fully functional, ZINSER Flame Cutting System – CNC 500 – Table 3,000 × 8,000 mm Industrial version | CNC controlled | Immediately available Short description: Pedpfxjyanbbj Ahvegi For sale is a robust Zinser flame cutting system with Zinser CNC 500 control and a large cutting table measuring 3 × 8 m. The machine dates from the 1980s and was operating perfectly up to its professional dismantling. The machine is currently dismantled; therefore, a test run is not possible. Inspection of the system and all components is, of course, possible by appointment. Technical data: - Manufacturer: Zinser - Machine type: Not specified - Year of manufacture: 1980s - Control unit: Zinser CNC 500 - Cutting process: Oxy-fuel / flame cutting - Cutting table: approx. 3,000 × 8,000 mm - Condition: used, dismantled Condition & Classification: - System was in operation and fully functional up to dismantling - Dismantled in an orderly and professional manner - Heavy-duty industrial design - Mechanics, table, and gantry in solid condition - Due to age, not a modern high-speed CNC, but: x very robust x straightforward technology x ideal for refurbishment, modernization, or continued use Scope of delivery: - Cutting table 3 × 8 m - Gantry / carriage - CNC control Zinser CNC 500 - Existing flame cutting components - Sale as inspected Inspection & Collection: - Inspection possible by appointment - No test run possible as the system is dismantled - Loading and transport to be arranged by buyer - Location: Germany

Condition: new, Year of construction: 2024, NEW Plasma Cutting Machine. Dimensions: 3,000 mm x 1,500 mm Max. steel cutting thickness: 22 mm Podpotu E Dusfx Ahvegi Max. stainless steel cutting thickness: 12 mm Supplied with CAD CAM software. DWG and DXF data transfer via USB and network card. CE certification. ISO 9001, GB/T 19001. 120 A generator. The operational cost is extremely low – only 5.5 kW and compressed air!

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 25 mm, overall weight: 800 kg, The plasma cutting machine can cut round, square and rectangular tubes with a plasma jet. Easy programming in the office or at the machine with the help of a CAM system. Import of step files possible. The cam system creates a CNC code which is processed on the machine. Nesting manual or automatic. The machine is supplied with a plasma system from the manufacturer Hypertherm. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Dragon 220 Podpfx Aox S Ux Eohvsgi Round tube - 220 mm Square tube - 150 mm Maximum part weight - 250kg Maximum feed - 250 mm/s Raw length up to - 6000mm Drives - Servo synchronous motor Gear/Rack - hardened and ground 4 jaw chuck - 200 mm 12" touch screen display Can be seen working at our factory in Ireland

Condition: used, Year of construction: 2021, UltraSharp plasma cutting machine. The machine is fitted with the Burny cnc control ,fitted with a Lincoln Podpfsyli Hiox Ahvegi Electric 170 amp high definition plasma cutting system including Inova automatic torch height control and UltraSharp cutting technology. It would be capable of a cutting area of 4,000mm x 2,000mm fitted with a sectional fume extraction table.

Condition: used, Year of construction: 2022, RUR2500P UltraSharp plasma cutting machine, complete with a Burny 10 icd plus CNC control and a Lincoln Electric Fineline 170 amp plasma cutting system including a nova automatic torch height control, 8m x 2m extraction table with a 8m x 2m cut tume extraction system Pgjdoylizyepfx Ahvoi

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Podoibq Itspfx Ahvogi Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: ready for operation (used), For sale is a CNC laser cutting system by Amada Co., Ltd., model PROMECAM / FO-3015 NT, equipped with the ASLUL 300 FO Tower automatic loading and unloading system. This is a highly productive industrial unit for automated sheet metal processing, including an integrated tower storage system with automatic material handling for efficient manufacturing processes with minimal manpower requirements. Technical Data – CNC Laser Cutting System AMADA PROMECAM 3015 NT with ASLUL 300 FO Tower Base Machine – Laser System 3015 NT Machine type: CNC laser cutting machine (CO₂ laser, flying optics) Manufacturer: Amada Co., Ltd. / AMADA PROMECAM Model: FO-3015 NT Control: AMNC-F CNC with touchscreen Laser technology: CO₂ laser, flying optics system Laser Power Laser output: 4,000 W Laser resonator: Fanuc AF 4000 Laser principle: CO₂ silent discharge Continuous power stability: ± 1% Working Area X-axis: approx. 3,070 mm Y-axis: approx. 1,550 mm Z-axis: approx. 100 – 200 mm Max. sheet size: approx. 3,000 × 1,500 mm Max. workpiece weight: up to approx. 920 kg Cutting capacity (typical): Mild steel: up to approx. 20 mm Stainless steel: up to approx. 15 mm Aluminum: up to approx. 10 mm Material thickness in general: 0.5 – 20 mm depending on material and laser power Axes and Dynamics 3 CNC axes: X, Y, Z Positioning accuracy: ± 0.01 mm Repeatability: ± 0.005 mm Positioning speed: up to 120 m/min per axis Simultaneous speed: up to 169 m/min Machine Design Flying optics system Heavy-duty cast frame for high stability Automatic pallet changer (2-table system) Automatic cutting head tracking Capacitive cutting head Connections Power supply: 400 V Total power consumption: approx. 70 kVA Compressed air requirement: approx. 6 bar Machine Dimensions and Weight Machine weight: approx. 11,000 kg Machine dimensions: approx. Length: 6,700 mm / Width: 4,400 mm / Height: approx. 2,100 mm ASLUL 300 FO Tower System – Automatic Sheet Storage System: automatic loading and unloading system with tower storage Max. sheet size: 3,050 × 1,525 mm Max. pallet weight: up to 3,000 kg Number of pallets: multi-level automatic storage system Pallet change time: approx. 55 seconds Pgedpfoyk S Rzox Ahvji Features: automatic loading and unloading automatic material handling automatic pallet changing finished parts handling integration into automated production lines Equipment Flying optics laser system automatic shuttle pallet changer AMNC-F CNC controller ASLUL 300 FO Tower System automatic material handling suitable for industrial series production fully automatic operation possible extremely high productivity reduced setup times minimal personnel requirement Condition Used Technically inspected and fully functional The system can be demonstrated Immediately available Delivery time: upon agreement Freight terms: ex site, loaded free of charge Dismantling / transport / reassembly can be organized

Condition: as good as new (ex-display), The Plasma-Jet AirPro Compact 1530 Maxpro is a state-of-the-art plasma cutting machine designed for the Plasma Cutting Machines category, offering exceptional performance within the compact product group. Built for efficiency and reliability, this system features a one-piece design that ensures easy transport and rapid setup, ideal for custom and small-series manufacturing environments. With a cutting length of 3,050 mm and a width of 1,550 mm, the machine can handle substantial cutting tasks while minimizing operating costs. It comes configured with high-performance features such as a powerful MAXPRO 200 plasma source, an intuitive PULSER 3 CNC unit, and professional ProNest LT nesting software. The machine utilizes EtherCAT technology for optimal CNC performance, while the robust linear guides provide accurate, long-lasting operation. In addition, a built-in collision guard protects against damage, and a magnetic coupling allows for quick maintenance. Invest in your workshop's capabilities today by requesting a quote for the Plasma-Jet AirPro Compact 1530 Maxpro – a precise solution in the Plasma Cutting Machines product group. Pgsdpfxeyg Dg To Ahvji

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Pgsdpfxsu Dw I Ee Ahvoi Full description Is attached as a document. Year of construction: 2019 With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us.

Condition: new, Year of construction: 2026, CNC plasma, oxygen-gas burner is a device designed for cutting out shapes from sheets (any shapes). This machine features simplicity and easy handling. Our CNC cutter ensures high accuracy and repeatability of cutting (0.1 mm), allowing for the burned shapes to be transferred directly to the next stage of manufacturing. Why is it profitable? Possibility of burning using plasma or gases 2 in 1 modest dimensions of the machine allow for placing it anywhere THC voltage height controller precise blowtorch setup a very accurate cut, without further additional machining necessary sheet detection system a handy control panel an intuitive machine handling possibility to cut and gouge steel a library of standard geometrical figures Features and equipment 1500×3000 working area Y-axis 140 mm (clearance) range Usage of rigid and stable construction Pgedpfxji Apn Us Ahvei Gases mixer Gas blowtorch Voltage height controller Blowtorch height regulation system Blowtorch height and stabilisation sensor FastCAM software along with a licence in English USB port as well as internal and external memory User–friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them. NESTING – an automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen * Illustrations are preview only, the device is sold without the table. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 2,200 kg, input voltage: 400 V, total width: 3,000 mm, total height: 1,800 mm, total length: 4,300 mm, workpiece weight (max.): 1,000 kg, power of the servo motor: 750 W, working width: 1,550 mm, positioning speed: 50 m/min, table width: 1,550 mm, cutting current: 100 A, warranty duration: 24 months, working length: 3,050 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 150 mm, Kompakt plasma cutter manufactured in Poland! Pgjdpfx Ahjykpp Ievoi Brand new machine, lead time from 8 to 12 weeks. Key features: - robust mechanics based on a welded and stress-relieved frame, - hardened helical rack gears, - fume extraction flap control system for enhanced extraction efficiency, - drawers for small parts and for easy cleaning of the combustion chamber, - one of the fastest machines on the market – 50 m/min, - ThermaCut EX-TRAFIRE 100SD plasma unit, - intuitive, straightforward controls, - fume extraction fan. Alternative configurations possible: - change of working area - use of a different plasma unit

Year of construction: 2008, condition: ready for operation (used), Working dimensions X/Y: 2000mm/1500mm, max. clearance height: 70mm, max. material width: 1690mm, speed: 2m/min, acceleration: 18m/s², resolution: 0.001mm, accuracy: +/-0.05mm, repeatability: +/-0.05mm, laser source: Rofin ScX series 300W, laser class: 1, laser power: 300W. The laser source is defective. Including shuttle table, cooling unit, hydraulic unit and register mark recognition camera. Documentation available. An on-site inspection is possible. Pgjdpfeyi E Eiex Ahvsi

Condition: like new (used), Year of construction: 2022, Complete refurbished Ficep machine . Pgsdpfx Ahex H T H Rovsi

Condition: used, Year of construction: 2009, machine/vehicle number: 725, ECKERT plasma-gas cutting machine - JANTAR 2 Parameters: Pgedpfjqntkisx Ahvei Working width 2500 mm Working length 6000 mm Positioning accuracy +/- 0,005mm Thickness of plasma cutting - 35 mm Thickness of torch cutting - 120 mm Max thickness of sheet metal/cutting max 120 mm

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, working range: 12,000 mm, sheet thickness (max.): 300 mm, sheet thickness steel (max.): 300 mm, sheet thickness aluminum (max.): 60 mm, cutting current: 300 A, warranty duration: 24 months, travel distance X-axis: 3,000 mm, travel distance Y-axis: 12,000 mm, travel distance Z-axis: 450 mm, type of cooling: water, One of the most advanced and efficient plasma cutting machines on the market! Thunder 3D is a plasma system capable of cutting and beveling steel plates, pipes, and profiles, as well as open sections such as H, L, C, and T beams. 100% MADE IN POLAND! Travel speed up to 60 m/min! Working area: 3000x12000 mm (other options available from 1500 mm to over 30,000 mm) Compatible with Hypertherm and Kjellberg plasma units. Pgodpsxw Ihhefx Ahvei Optional gas torch (propane, acetylene, natural gas). 3D bevel head with a rotation angle of at least: ±93° on the A axis and at least: ±50° on the B axis. Capable of cutting V, A, X, K, Y, and 2Y bevels. Access to Industry 4.0 application. For more detailed information, please contact us.