Used Cnc Flame Cutting Machine Plasma for sale (65,877)

Condition: good (used), Year of construction: 2016, FICEP 1201 FRC Minimum Profile mm 80 x 42 Maximum Profile mm 1220 x 60 Rsdpfx Adjva Hfneaen 1 x OXY FUEL Cutting Head 1 x HYPERTHERM HPR 260XD Plasma Torch. Dust extraction system.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 30490, Offered for sale: Ficep DFRC 1202 drilling and sawing machine for profiles, the machine is fully operational. The indicated sale price includes disassembly and loading onto trucks. Rodsx Dkh Depfx Adaen

Condition: good (used), Year of construction: 2008, functionality: fully functional, Fully operational plasma cutting machine in very good condition. MicroStep PLS 7501.25PG Equipped with two torches: plasma and gas. Power source: Hypertherm, HyPerformance Plasma HPR260. Rodpjwinpxefx Adasn Cuts mild steel and stainless steel. Table dimensions: 7.5 m x 2.5 m. The machine can be inspected under power in Vilnius.

Condition: ready for operation (used), A CNC gantry plasma and flame cutting machine is available. Working dimensions X/Y: 6500mm/2500mm, power source: Kjellberg, max. number of torches: 3, control: Heidenhain TNC 355. An on-site inspection is possible. Redpfx Aox A Hhdsdaon

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 230 V, total width: 2,450 mm, total height: 1,550 mm, total length: 10,000 mm, table height: 800 mm, positioning speed: 20,000 m/min, space requirement length: 10,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, height adjustment type: pneumatic, ESAB E-Vent Plasma Cutting System + Hypertherm Powermax 1000 – Year of Manufacture 2006 – Defective / For Hobbyists For sale is an ESAB MXL-P 2000, E-Vent plasma cutting system (year 2006) including a Hypertherm Powermax 1000 plasma source. The machine is defective and is being sold as a non-working unit/parts donor. The Powermax 1000 is present; operational status has not been tested. Key technical data (ESAB E-Vent): * Machine length: approx. 7000 mm Redpfex Ap Tpex Adasn * Cutting length: approx. 6000 mm * Machine width: approx. 2450 mm * Cutting width: approx. 1500 mm * Machine height: approx. 1550 mm * Weight: approx. 1500 kg * Voltage: 230 V / 50 Hz, Power consumption 2 kVA Ideal for: * Refurbishment * Conversion to new control system * Parts procurement (gantry, guides, table, plasma source) No warranty, no returns.

Condition: good (used), functionality: fully functional, overall weight: 5,000 kg, total width: 4,000 mm, total height: 3,000 mm, total length: 4,000 mm, including KAPPA extraction system Type: MYKRON M 16 Serial number: 00M16.0055 Motor power: 15 kW Speed: 3000 rpm Year of manufacture: 2000 Control type: NBS 300 Production number: 1513 Voltage: 230 V Frequency: 50 Hz Connection rating: 330 VA FCA D-04895 Falkenberg, loaded onto truck Rodpjxwnd Asfx Adaon

Condition: new, Plasma cutter Erfi PS990 Manufacturer: Erfi Type: PS990 Plasma cutting machine ERFI PS990 - powerful, single-stage plasma cutter. Up to 20mm clean cut in steel, up to 25mm separating cut. Contact-free ignition by HF-ignition also on paint and rust by pilot arc. Includes 6m torch, standard filter and integrated pressure reducer with pressure gauge. Redpfxoxwmb Ts Adaon The ERFI devices are produced with the utmost care in Germany - that is why ERFI always gives a guarantee of 3 years - without restriction. Technical data: Mains voltage 3x400V Frequency 50Hz Fuse protection 32A slow-blow Cutting current 60A level 1/ 90A level 2 Air pressure 6-10bar Weight 105kg Available immediately. For collection by the customer. Forklift available. Shipping also possible Subject to errors and prior sale

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: sn. 816, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, total width: 4,000 mm, total length: 3,600 mm, total height: 3,500 mm, warranty duration: 12 months, cutting height (max.): 1,300 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, space requirement height: 3,600 mm, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. Rodpfx Aswq Dvdedaen The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Condition: new, Titan DrillCut – Flexible Cutting and Drilling Center for Maximum Efficiency The Titan DrillCut is a powerful CNC machining center that combines thermal cutting (plasma or oxy-fuel) with precise drilling and thread cutting in one machine. The robust gantry design ensures vibration-free processing even with heavy material thicknesses up to 200 mm. Equipped with the integrated VarioDrill system, it allows for efficient, non-hardening machining of holes from Ø 6 to 40 mm as well as thread cutting from M4 to M20. An automatic tool changer enables rapid switching between drilling, countersinking, and threading – ideal for automated production processes. This machine is the perfect solution for steel construction, mechanical engineering, and industrial metalworking, where utmost precision, flexibility, and production speed are essential. Rsdpfx Adjfz A I Eeaon

Condition: as good as new (ex-display), Year of construction: 2024, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. Redpfx Ajxyyxdjdaen - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. - Gantry height Z = 100 mm.

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. Rodpfjxywupox Adaen The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,300 mm, total length: 4,215 mm, table height: 1,000 mm, working width: 1,500 mm, Equipment: documentation/manual, MetalMaster 2.0 CNC-controlled flatbed dry plasma cutting machine for oxy-fuel and plasma cutting of individual metal sheets. The positive-fit double-sided longitudinal drives and precisely machined guide rails offer you: - High positioning and working speeds - Maximum positioning speed: 35,000 mm/min - Working speed: 5,000 mm/min - High cutting accuracy and contour fidelity - Accuracies according to DIN EN 28206 - Supply voltage: 400 V 50 Hz, TN-S system (3/PE/N) - Color scheme: main components in RAL 5002 blue - Ambient temperature: +5 °C to +45 °C - Relative humidity: max. 90%, non-condensing Rjdpfx Adjxyhnajajn Integrated extraction table - Table height: 1000 mm - Maximum table load: 800 kg/m2 Machine - Maximum sheet format: 1500x3000 mm - Overall width: 2300 mm - Overall length: 4215 mm For further information, please see the pictures!

Year of construction: 2006, condition: ready for operation (used), A CNC laser cutting system Bystronic is available. Laser power: 2200W, max. sheet dimensions X/Y: 3000mm/1500mm, travel path X/Y/Z: 1562mm/772mm/100mm, max. material thickness mild steel/stainless steel/aluminium: 8mm/6mm/4mm, positioning accuracy: +/-0.1mm, simultaneous speed: 140m/min, load capacity loading table/cutting table: 300kg/80kg. Machine dimensions X/Y/Z: approx. 6250mm/6000mm/2150mm, laser source dimensions X/Y/Z: approx. 1900mm/950mm/1250mm, weight: approx. 13500kg. Including combined cooling and filtration unit WKL 300-F. Dokumentation vorhanden. An on-site inspection is possible. Rjdpexx Ud Sjfx Adaen

Year of construction: 2010, condition: ready for operation (used), Laser power: 2000W, wavelength: 10.6µm, working dimensions X/Y/Z: 3000mm/1500mm/75mm, max. material thickness mild steel/stainless steel/aluminum: 15mm/6mm/5mm, max. table load: 550kg, travel speed: 60m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm. Machine dimensions X/Y/Z: approx. 7400mm/3300mm/2300mm, weight: approx. 8900kg. Documentation available. An on-site inspection is possible. Redpoxxzh Djfx Adaen

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 50 mm, table height: 1,750 mm, table length: 3,710 mm, working width: 1,500 mm, table width: 1,960 mm, We are selling a Swift-Cut 3000XP CNC plasma cutting center with a Hypertherm MAXPRO200, purchased mid-2023. The machine has seen very little use. According to the manufacturer, the maximum sheet thickness is 50 mm; we have cut sheets up to 40 mm thick. The cuts were clean and straight, with minimal slag. Piercing in the middle is possible up to 32 mm thickness. The machine offers online support from Swift Cut in both English and German. Solid Edge software is installed on the machine. Redexxighepfx Adasn The machine is immediately available. We are planning to invest in further production equipment. The unit is located at our subsidiary in the Czech Republic – Vrbno pod Pradědem.

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 20515021, table length: 6,000 mm, table width: 2,500 mm, Equipment and features: Power supply PRECISION PLASMARC 400 Cutting heads 2, of which the cutting head is manually reversible Rsdpsu Rnkwsfx Adaen Lower cutting table dimensions 2,5 x 6 m Equipment: - heat recovery and flue gas suction system included in the shop The machine is in good condition, current and can be inspected when running. The machine is located in Varkaus.

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 115331, working range: 6,000 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, overall weight: 4,000 kg, input voltage: 400 V, cutting height (max.): 200 mm, workpiece weight (max.): 3,800 kg, table length: 6,000 mm, table width: 2,000 mm, cutting current: 280 A, Plasma cutting machine with extraction, dimensions 6000 x 2000mm Voortman VACAM VCS Thermo Plasma cutting system Kjellberg HiFocus 280i Plasma gas control unit FlowControl 3 Cooling unit KWE 360 Cutting current 10 - 280A Smoke extraction system Teka Filtercube 4 H Year of manufacture 06/2013 Filter inserts 4 Rjdpsvld D Sofx Adaon integrated blower Motor power 7.5KW

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Redpfsxxa Ucsx Adaen

Year of construction: 2007, condition: ready for operation (used), A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible. Rsdoxwn Inspfx Adajn

Condition: used, Year of construction: 2017, Plasma cutting machine from 2017, little used, made in Turkey. Fully operational. Currently selected. Technical Parameters Table surface: 2 500x 12000 mm Plasma generator: AJAN PP 260 (Precision Plasma 260 A ) Machine bridges: 1 PCS Plasma burner: Ajan (1 pc.): Gas burner: AJAN (1 pc.) + with optical ignition CNC systems: CNC control, Linux Standart equipment Ventilated width of the work table: 2500 mm Ventilated length of the work table: 12000 mm Maximum size of the sheet: 2500 x 12000 mm Quantity of bridges: 1 unit. Plasma system: PP 260 Ajan Current: 30A, 80A, 130A, 260A Cutting Ability (low-carbon steel): 32 mm Cutting Capacity (stainless metals): 20 mm Maximum piercing of holes: 40 mm Max. Cutting ability (cut from edge): 100 mm Max. Cutting capacity of the gas head: 150 mm Maximum cutting speed (theoretical): ~ Almm/min (actual speed depends on the material, brand and thickness of the piece) Positioning max: 15 m/min Re- positioning max: +/-0.01 mm Taper angle in accordance with ISO 9013 standard "range 3′ Gases for cutting: 02, N2, F5, H35 Protection: compressed air Ventilation of the table: mechanical valve Filtering: JET filter AJF Functions - a bridge controlled by two 2-way servomotors of the AC type - automatic ignition of the gas burner - automatic gas control (for plasma and gas cutting) - automatic burner height control (plasma) THC - the function of "ohmic control" - function "ARC control" - function "Microjoint" - function marking with a plasma head Control - programmable possibilities with DIN/ISO codes - Ability to work with DXF, ESSI, and NC toolpath files - Ventilator and generator for remote start and remote control with CNC - AJAN-CAD - AJAN-i own control - AJANCAM V 7.0 - AJAN-i own software The start package Include: 20 electrodes, 20 nozzles, 20 nozzle covers, 2 gas rings, 2 nozzle rings and coolant required to start the machine. AJAN-i CNC LINUX NEW from 2017! AJAN CNC based on the LINUX operating system "Allinclusive" Control Panel Rjdpfjrf S Tbox Adaon - Free AJAN-CAD V 7.0 - Free software updates - Geometric Shape Catalog Automatic restart if stopped (power) - Possibility of programming DIN / ISO G codes - Ability to work in DXF, ESSI trajectories and NC files - Wide selection, tuning and recording of the program - Automatic selection of material and parameters (customize) AJANCAM v 7.0 AJANCamv7.0 was developed by its own software configuration, which has the following features: - Easy to use, fast and efficient - Automatic errors, provisioning - Ability to write a text - its own directory (libary) - Automatic or manual placement - Cutting sequential modelling - According to the automatic layout of DXF and G-codes ESSI making The total ared: 384 m2 Filtration elements: 16 Elements of Noise filter: 85 dBA Ventilation Fan power: 11kW Feature blow dry with compressed air If you have more questions, welcome.

Condition: used, Year of construction: 2018, 2018 plasma cutting machine, in good condition, lightly used. Sold together with metal racks or separately. Equipped with three cutting heads – one plasma and two gas cutting heads. The machine can operate either the plasma head or both gas heads simultaneously (up to 100 mm thickness, using different technologies). For thicker materials, only one gas head can be used due to gas console throughput. Plasma Year of manufacture: 2018 Plasma source: Kjellberg HiFocus 300A Working area (X x Y): 2500 x 13000 mm table (1m safety zone, two 6000mm sheets placed on the table) Rodpfoww Sy Djx Adaen Minimum/maximum cutting thickness: Mainly used within 20 – 70 mm range, virtually no minimum limit – plasma can cut from 2 mm, maximum with gas is 300 mm. Plasma is intended for quality cutting of mild steel up to 50 mm. Racks Manufacturer: OHRA GmbH (Germany) Year of manufacture: 2018 Shelf load capacity: 3T If you have further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2005, A Bystronic CNC laser cutting system is available. Laser type: ByLaser 4400, laser power: 4400W, wavelength: 10.7µm, working dimensions X/Y: 3000mm/1500mm, cutting dimensions X/Y/Z: 3000mm/1500mm/170mm, positioning speed: 80m/min, simultaneous positioning speed: 113m/min, acceleration: 4.5m/s², positioning accuracy: +/-0.1mm, repeatability: +/-0.05mm, max. workpiece weight: 890kg, max. sheet thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm. Machine dimensions X/Y/Z: approx. 12900mm/6100mm/2100mm, weight: approx. 13500kg, laser hours: 58157h, blower hours: 93930h, pump hours: 10398h. Includes water cooling unit, without extraction. The control was completely renewed in 2025. Documentation available. An on-site inspection is possible. Rjdoxv A E Espfx Adaen

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Rjdsgypclopfx Adasn Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration

Condition: good (used), Year of construction: 2012, Worktable: 3,000 x 1,500 mm Table height: 700 mm Load capacity: Max. 600 N/m² Material thickness: 0.5 – 6 mm Speed: Max. 36 m/min Control unit: Flat display, keyboard and mouse Power supply: 3x 400V, 50Hz + 1x 220V, 50Hz (approx. 10 kW) Pneumatics: 6.0 – 8.5 bar (approx. 300 l/min) Dimensions: 4,100 x 2,200 x 1,700 mm Weight: 1,400 kg The extraction unit is not included in the price. Redpfx Adjxugqvoaen However, upon request, we can provide a suitable extraction system for the machine.

Year of construction: 2023, condition: new, PLASMA PLOTTER MODEL MTX 2040 Construction: steel+aluminum Working field: 4000/2000/200 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear strips Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Linear guides: TBI IGUS guide Automatic material detection system Power supply: 240V Permissible load: 2000kg Total weight: 800kg net USB port for opening projects and transferring files using external pen-drives Sheet metal detection system THC cutting height control system TBI wire guides Double-sided gate drive: X-axis stepper motor and gear rails Y axis stepper motor and toothed rails Z axis stepper motor and ball screw Drives realized with TBI brand HGR 20 rails Table equipped with water grate- (Water table, giving cleaner cutting, material cooling and reducing gas emission during machining) INCLUDED: -water table -interchangeable grate -control software in Polish -Declaration of Conformity CE - DTR - warranty. -start-up and training included in the price The latest control system available in our plotters: Integrated THC height controller Anti-diving torch function Types of accepted files : DXF, PLT ( hpgl ), G-Codes (.tap) Integrated CAM module: MyMini CAM -. Automatic object recognition Ven. External. Path analysis in advance Cutting parameter database Correction of design angle to material Ability to cut from any point Possibility of cutting from the end Import of DXF,PLT or G-CODES Automatic generation of paths with offsets, entries and exits The program can be used with an external CAM program Separate speed for holes Parameter database Project correction to material angle Rjdpfx Aeiphrlsdaen Soft and Hardware limits THC anti-diving functions Game pad control capability Material detection by touch system, floating head WHY IT'S WORKING WE ARE A POLISH MANUFACTURER OF PLASMA BURNERS CLOSE COOPERATION WITH PROMA-ELECTRONIKA COMPANY (PRODUCER OF THC) PROFESSIONAL GUIDES OF THE RENOWNED COMPANY HIWIN, A FEATURE OF THESE GUIDES IS VERY LONG LIFE, HIGH QUALITY OF CUTTING NOT REQUIRING FURTHER PROCESSING COMPONENTS SUCH AS GEARS, MOUNTS, HANDLES, ETC. ARE MADE BY US USING CNC TECHNOLOGY, WHICH RESULTS IN HIGH QUALITY AND REPEATABILITY OUR STRENGTHS HIGH CLASS SHIELDED CABLES INDUCTIVE SENSORS ON ALL AXES, WHICH ARE NOT SUBJECT TO DUST JAMMING ADVANCED THC MY PLASM SMOOTH BURNER OPERATION CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) MOUNTED ON CUTTING MACHINES WE ASSEMBLE CUTTING MACHINES DELIVERED BY A CUSTOMER OR WE PURCHASE CUTTING MACHINES MEETING CUSTOMER'S REQUIREMENTS WE ASSIST IN ARRANGING LEASES It is possible to select the appropriate cutting machine to individual needs of the company. We offer other dimensions of tables.