Used Cnc Flame Cutting Machine Plasma for sale (65,913)

Condition: used, Year of construction: 2021, cutting range for steel to 50 mm capacity at 100% 130 A weight of the machine ca. 130 kg Nwjdpfev Da Udjx Ah Hob dimensions of the machine ca. 650 x 400 x 900 mm ORIGINAL PRICE: ~6,000 EURO Very good condition Very little use Features: - Burner A151/6 - Ground cable 25 mm² Adjustment range, continuously variable [A] 25 - 150 Duty cycle at Imax. (10 min) at 20°C [%] 60 Mains connection [V] 3 x 400 V Fuse protection (slow-blow) [A] 35 Protection class IP 23 Cutting capacity max. [kw] 21 Current/voltage at 100% IDl [A/V] 130/130 Power consumption max. 24.5 Power factor [cos phi] 0.97 Max. cutting quality with REHM power torch 40 mm Max. cutting capacity for manual cutting with S 235/S355 [mm] 50

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Furnishing: Cutting area 1,525 x 3,050mm Consisting of guiding machine, CNC control Nwjdpfx Aoiid Hwjh Heb Plasma torch holder incl. torch height control, incl. Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!

Condition: new, table width 3000 mm table length 1500 mm burner heads 1 Control CNC feed 20.000 mm/min total power requirement 15 kVA dimensions of the machine ca. 4,5 x 2,5 m * Heavy machine bed with precision guides for quiet movement machine Njdpopm U U Nefx Ah Howb * A ball bearing cross carriage for height adjustment with 400mm vertical Hub * Thermal separation of the drive and cutting areas ensures the highest precision * Automatic height finding and torch height control during cutting * Torch holder with collision protection and automatic shutdown in the event of a collision * Installation or implementation of the machine using the plug & play method with a forklift, Ant or crane possible * 3-sided accessibility to cutting area through boom design SATOTEC suction table: The SATOTEC table system is characterized by a stable table construction max. cutting thickness of 150 mm. For cutting a workpiece thickness of 150 mm, oxyfuel cutting technology is required. The workpiece support frame has interchangeable ones placed at a 45° angle and 3 mm thick flat iron slats. The distance between the slats is 50 mm. Power source Kjellberg Q1500: * Precise plasma cutting of all electrically conductive materials from 0.5 to 60 mm both dry and under water * Recommended cutting range from 0.5 to 40 mm * Maximum piercing thickness 30 mm, increase possible with ProPierce Technology * Marking, notching and punching, including coated metallic materials * Inverter power source with digitally controlled, fully electronic process flow * Integrated cooling with partially automated filling and emptying Gas control: Fully automatically controlled, processor-controlled plasma all-gas console Q- Gas for cutting all metals Lantek Expert Cut Inside: CAD/CAM module integrated in the machine control Extraction TEKA EcoCube 5.5 kW Medium to be filtered: dry, fat-free or oil-free dust/smoke Filter area: 100 m² (4 cartridges of 25 m²) Filter cartridge: BIA M, Type Nano Degree of separation: 99% (according to BGIA test certificate) Filter control: automatic filter cleaning, PLC Fan performance: 4500 m³/h Motor power: 5.5 kW Connection voltage: 400V/50 Hz or 480V 60Hz. Current consumption: 11.5 A Current type: 3Ph+N+PE Fan structure: on the system, including silencer duct bend, right side Motor control: frequency converter Noise level: 75dB(A) + max 10 dB(A) with cleaning pulse Intake port: NW 250 mm via intake duct, left side Exhaust: via silencer duct bend Dimensions (W x D): approx. 800 x 800 mm System color: - Fan housing: Light gray - Cartridge housing: RAL 5007 brilliant blue Special equipment: - Locking hooks and toggle locks - Compressed air connection and condensate drain each mounted with one Bulkhead fitting - Compressed air connection with hose nozzle d=8mm - Provide the system with grounding bolts - Cable in UL version - EATON frequency converter on the left in the attached control cabinet

Condition: good (used), Plasma cutting machine, plasma cutter, for plasma cutting system -Manufacturer: Hypertherm -Type: HySpeed HT2000LHF -Equipment: with hose package and cutting nozzle head Nwjdpfxowd Tg So Ah Hob -Max. cutting current: 200 A -Dimensions: 1100/720/H1040 mm -Weight: 459 kg

Condition: good (used), Plasma cutting machine, plasma cutter for plasma cutting system -Manufacturer: Hypertherm, gas console for plasma cutting machine -Type: 073239 from plasma cutting machine HT2000LHF Nwodpfowpg I Tox Ah Hob -Dimensions: 295/175/H370 mm -Weight: 9.9 kg

Year of construction: 2008, condition: ready for operation (used), A CNC laser cutting system Trumpf including RotoLas and Liftmaster is available. Laser source: TruFlow 5000, laser type: CO2 laser, laser power: 5000W, travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness structural steel/stainless steel/aluminium: 25mm/25mm/15mm, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm, max. axis speed: 200m/min, max. simultaneous speed: 300m/min. Machine dimensions X/Y/Z: approx. 11100mm/4600mm/2400mm, weight: approx. 12000kg, operating hours: 55462h, laser hours: 24430h, beam hours: 12742h. Hours status as of 01/2026. Documentation available. On-site inspection is possible. Expected to be available from January 2027. Nwedpfx Aox Tumxoh Hob

Condition: excellent (used), Year of construction: 2019, Type: Gammatec 2040 Cutting size: 4,000 x 2,000 mm Max. sheet thickness: 30 mm Number of torches: 1 Nodpfx Ahox Ttq Aj Hjwb Control system: Kjellberg Finsterwalde HiFocus 280i / PGV 3-440 / KWE 360 Connection: 2 kVA Dimensions: 5,000 x 2,400 x 1,000 mm Weight: approx. 4 t

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 339, type of input current: three-phase, sheet thickness (max.): 12 mm, working width: 1,500 mm, working length: 3,000 mm, color: red, Equipment: documentation/manual, lighting, For sale: An excellent plasma cutting machine from the renowned manufacturer STIGAL, model DYNAMIC SPEED with a power of 5500W. Manufactured in 2014, powered by 400V. Serial number 339. CUTTING MACHINE IN CONTINUOUS OPERATION, REGULARLY SERVICED Fully operational! Nwsdpfx Aex Tg Smoh Hob Technical parameters of the STIGAL DYNAMIC SPEED plasma cutter: Working area (L x W): 3000 x 1500 mm Positioning accuracy: +/- 0.05 mm Travelling speed: 22 m/min Maximum power consumption: 5500 W Inspection welcome

Condition: new, Year of construction: 2024, CNC plasma, oxygen-gas burner is a device designed for cutting out shapes from sheets (any shapes). This machine features simplicity and easy handling. Our CNC cutter ensures high accuracy and repeatability of cutting (0.1 mm), allowing for the burned shapes to be transferred directly to the next stage of manufacturing. Why is it profitable? Possibility of burning using plasma or gases 2 in 1 modest dimensions of the machine allow for placing it anywhere THC voltage height controller precise blowtorch setup a very accurate cut, without further additional machining necessary sheet detection system a handy control panel an intuitive machine handling possibility to cut and gouge steel a library of standard geometrical figures Features and equipment 1500×3000 working area Y-axis 140 mm (clearance) range Nsdpfei Apn Ujx Ah Hjwb Usage of rigid and stable construction Gases mixer Gas blowtorch Voltage height controller Blowtorch height regulation system Blowtorch height and stabilisation sensor FastCAM software along with a licence in English USB port as well as internal and external memory User–friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them. NESTING – an automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen * Illustrations are preview only, the device is sold without the table. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 245, type of input current: three-phase, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, working width: 2,000 mm, working length: 6,000 mm, color: red, Equipment: documentation/manual, lighting, For sale: an excellent plasma gas-oxygen cutting machine from a renowned brand with 8000W power. STIGAL DYNAMIC SPEED, Cebora 165. Manufactured in 2012, 400V supply voltage. Serial number 245. The cutting machine is in continuous operation and regularly serviced. Fully operational! Technical specifications of the STIGAL DYNAMIC SPEED plasma cutter: working area (L x W): 6000 x 2000 mm, positioning accuracy: +/- 0.05 mm, travel speed: 22 m/min, maximum power consumption: 8000 W. Viewing is welcome. Nwjdpfxsx S E Nzj Ah Hjb

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-2010-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 900.0 kg - Maximum load: 1120.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Nwsdpfxothi Ams Ah Hjb Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets Nedpfx Ahoh E Izfj Hswb The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma/gas cutting machine PCO-3020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1550.0 kg - Maximum load: 2800.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Nodpfx Ahjh E Izbe Hjwb Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-3015-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm - Height: 1500 mm - Total mass: 1100.0 kg - Maximum load: 1800.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Nodpfx Ash E Izish Hjwb Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-2512-d The machine was engineered and manufactured in Poland. Nwsdsh E Iy Eepfx Ah Heb Working parameters: - XY operating range (working area): 1270 x 2600mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3150 mm - Width: 2030 mm - Height: 1500 mm - Total mass: 950.0 kg - Maximum load: 1250.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-6020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2600.0 kg - Maximum load: 5000.0 kg - Adjustable support legs: 10 pcs Systems THC – Torch Height Controller – The integrated cutting height control system automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the programme information about the angle of the material in relation to the table. Assistance by a specialist We are committed to staying in continuous contact with our Customers; therefore, we meet this challenge by offering a package of hours to be used for the Otinus Professional Assistance within every machine purchased. Otinus Academy Nodpfx Aheh E Iyzs Howb This is a constantly growing e-learning platform created for Otinus brand Clients. By purchasing this machine you will gain a year access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Supplied with machine Installation of the machine and training in the use of the machine at our Clients' sites. - 1 day, up to 8 hours - installation of the machine and learning to use the controller. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets Nwsdpeh E Iytjfx Ah Hob The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCO-2512-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1270 x 2600mm Nwsdpfx Ahorp A Uko Hsb - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3150 mm - Width: 2030 mm - Height: 1500 mm - Total mass: 1050.0 kg - Maximum load: 1750.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-3020-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1450.0 kg - Maximum load: 2000.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Nodpfx Aerp Dcreh Hswb Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: new, Year of construction: 2024, Many of our machines are available from stock. Call and ask to find out more. CNC plasma/gas cutting machine PCV-3015-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1520 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2280 mm Nwsdpfx Ahsrp Dmbe Hjb - Height: 1500 mm - Total mass: 1200.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: excellent (used), Year of construction: 2016, Portal plasma cutting system KOIKE MOD. DELTATEX 4000. Useful vertical transversal cut: mm 3,000. Useful vertical longitudinal cut: mm 12,000. Length of runways: mm 14,000. Movement speed: mm/min 24,000. Nwedpfjv Sua Rjx Ah Heb Gantry guide system: X - Y axes, rack and pinion. Type of trolleys installed: 1x Trolley for KOIKE 3D Link plasma support. Numerical Control: KoiKe Katana. Source: KJELLBERG HF 280i. Recommended cutting capacity plasma KJELLBERG HF 280i.: Cooling unit KWE 360. -Vertical plasma: 35 mm (in production) CS/SS. -Maximum vertical plasma breakthrough: 40 mm CS/SS. Visible in operation, excellent condition.

Condition: excellent (used), Year of construction: 2008, Microstep plasma cutting machine cutting format 2000x6000MM power source Hypertherm 260 AMP year 2008 with nesting program on computer at the machine, incl. extraction and filter, many new wear parts Nwsdpfx Ajt Uz Upsh Hob

Condition: like new (used), Year of construction: 1991, machine/vehicle number: 176063, Plasma cutting machine CORTA PS 3100 Year of construction 1991/retrofit, machine number: 176063 Cutting area: 4000 x 2000 mm Alternating operation of 2 cutting processes: 1x plasma cutting unit Stak Pak ll, 105 Ampere 1x oxyfuel cutting torch MG 12 SE 30 CPS control unit DNC connection Graphic base version Trajectory: 6000 mm 1 torch suspension MG 200 K arc-dependent scanning 1 plasma interlock Portal carriage, cross carriage Torch suspension MG 200 K Nwsdpfxjvfmiwj Ah Hsb Cutting table 4200 x 2100 x 700 mm Modular, technically advanced Stak Pak II plasma cutting system, 105 amps 1 control module CM 6032 3 power modules PM 6042 1 PCM 35 torch, 15 m 1 PCM 140 torch, 15 m 1 cooling module ex works

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 Nodpfx Aou Dw I Eeh Hewb With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us.

Condition: refurbished (used), functionality: fully functional, type of cooling: air, welding current (min.): 30 A, welding current (max.): 60 A, Note: This is a Trade-in For sale Nsdpfxex Rgvms Ah Hewb Schweißring Plasmacut 65P 30-60 AMP 400 Volt Refurbished, serviced, and tested Including Plasma torch, earth work cable with clampo, and air hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.