Used Cnc Carousel for sale (8,716)

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,785 mm, travel distance Z-axis: 280 mm, overall weight: 5,500 kg, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 3 m/min, spindle motor power: 8,000 W, Equipment: documentation/manual, The machine worked until the end in Sweden at the moment it is undergoing a service inspection. It has two milling units Njdpfx Ahouzmyrsvswd

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: K35.0120.2201.01, TE 120, 12 pozi, CNC turret head K35.0120.2201.01, TE 120, 12 positions. Complete set of holders and drawings for holder production. Condition as shown in photos. Functional – removed from a machine that was in production until the last moment. On-site inspection possible. Year of manufacture 2017 – 4 years in storage. Nwodpfx Asxndmzjhvsd

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Nwodpfx Aeq U R Ruehvjd Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Nwedjq U Sa Sspfx Ahved Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: ready for operation (used), functionality: fully functional, CNC dividing head with stepper motor control, Nsdpowmd Irofx Ahvowd - Divisions from 1-999 possible - Odd divisions also possible - Ideal for face grinding, divisions – saws with high tooth pitch, or even slow cylindrical grinding of circular knives - Can be retrofitted to any tool grinding machine - Rotatable, pivotable in all directions, horizontally and vertically - Easy installation on the machine table using T-nuts - Can also be supplied with a small mounting angle - Center height 190 mm or 140 mm measured from the machine table. - CNC dividing head available with MT5 chuck or SK 40 chuck - Division is triggered via foot switch or optionally a simple contact/switch, etc. on the machine table can be triggered - The division process can be fully automated with the hydraulic machine table or linked via the CNC machine control system. New price: €12,800

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 Nsdpfx Ajq U R T Nshvjwd New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Nsdpfx Ahsxpqm Revjwd Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Front door: partial opening M0 / full opening

Year of construction: 1990, condition: like new (used), Well known 'EN' brand (Taïwan) 2-axis CNC spring generator. Low investment for CNC production of easy torsion springs up to 2,0 mm. Nwedpoiz Ddkefx Ahvsd

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request. Nwsdjwtpfpepfx Ahvjd

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Nwsdpfxop U Umks Ahved

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: Nedpfx Ahoua U Tzevewd - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,500 mm, turning diameter: 500 mm, spindle speed (max.): 3,000 rpm, quill stroke: 150 mm, controller model: Siemens 802 C, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Turning diameter: 500 mm Turning diameter over cross slide: 280 mm Turning length: 1,500 mm X-axis travel: 295 mm Z-axis travel: 1,435 mm Spindle bore: 82 mm Nsdeyuymfjpfx Ahvowd Spindle speed: 20 – 3,000 rpm Longitudinal feed: 5,000 mm/min Cross feed: 5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Quill stroke: 150 mm Bed width: 350 mm MACHINE DETAILS Control: Siemens 802 C Main motor: 7.5 kW Dimensions & Weight Footprint: approx. 3.23 x 1.47 x 1.73 m Machine weight: approx. 3 t

Condition: not inspected (used), functionality: unexamined, turning diameter over cross slide: 160 mm, turning length: 1,000 mm, turning diameter: 315 mm, spindle speed (max.): 3,300 rpm, bar passage: 52 mm, No reserve price – guaranteed sale to the highest bidder!\n\nTECHNICAL DETAILS\n\nTurning diameter: 315 mm\nTurning diameter over cross slide: 160 mm\n\nTurning length: 1,000 mm\n\nSpindle speed range: 30 – 3,300 rpm\n\nSpindle bore: 52 mm\n\nNumber of tool changer positions: 12\n\nMACHINE DETAILS\n\nControl model: Siemens Sinumerik 802 D\n\nMachine weight: approx. 6 t\n\nNote: The machine has been overhauled! Nwjdpfx Ajyv Aucshvod

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, spindle diameter: 130 mm, spindle speed (max.): 2,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 1,600 mm Travel Z-axis: 1,600 mm W-axis: 600 mm W-travel (quill extension): 900 mm Boring diameter: 800 mm Spindle diameter: 130 mm Spindle speed: 10 - 2,000 rpm Max. torque at boring spindle: 3,150 Nm Table load capacity: 8,000 kg Table size: 2,000 x 1,600 mm Clamping area: 1,800 x 2,000 mm T-slot width: 28 mm T-slot distance: 160 mm Rapid traverse X-axis: 2,500 mm/min Rapid traverse Z-axis: 2,500 mm/min Feed W-axis: 2,500 mm/min Feed Y-axis: 2,500 mm/min Rapid movement W-axis: 3,150 mm/min Rapid movement Y-axis: 5,000 mm/min Facing slide travel: 320 mm Max. torque at facing slide: 5,300 Nm Max. facing diameter: 1,400 mm MACHINE DETAILS Control: Heidenhain 430 Tool holder: ISO 50 Nwedpfsyvtrfsx Ahvjd Drive power – spindle motor: 15 - 30 kW Dimensions & Weight Dimensions (L x W x H): 6,000 x 4,000 x 4,000 mm Machine weight approx.: 40 t

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 380 mm, turning diameter: 165 mm, spindle speed (max.): 5,000 rpm, bar passage: 51 mm, controller model: Mitsubishi MELDAS, Machine in very good condition, fully functional both electrically and mechanically! TECHNICAL DETAILS Nedeyvfvbspfx Ahvowd Maximum bar capacity: 51 mm Maximum turning diameter: 165 mm Maximum turning length: 380 mm Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 5,000 rpm Tool turret Number of tool turrets: 2 Positions per turret: 12 Driven tools possible MACHINE DETAILS Control: Mitsubishi MELDAS Machine weight: 8,000 kg EQUIPMENT Y-axis Simultaneous machining possible High rigidity and process reliability Complete technical documentation available

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller model: Heidenhain TNC 426, rotational speed (max.): 8,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 800 mm Spindle speed: 30–8,000 rpm Spindle taper: ISO 40 Table size: 1,250 x 630 mm Workpiece weight: 1,000 kg Tool changer: 24 positions Nedpfjyv Ayfsx Ahvewd MACHINE DETAILS CNC control: Heidenhain TNC 426 Dimensions & Weight Space requirements: approx. 4.2 x 3.3 x 3.15 m Machine weight: approx. 7,500 kg

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 3,500 mm, working length: 8,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working length: 8,000 mm Working width: 3,500 mm MACHINE DETAILS Power: 300 A Plasma source: Nertajet EQUIPMENT 1 torch head 1 plasma head Nwsdpfx Ahsyv Awksvjd 1 oxy-fuel head

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 863 mm, turning diameter: 432 mm, rotational speed (max.): 3,400 rpm, swing diameter over bed slide: 762 mm, controller model: Haas CNC Control, TECHNICAL DETAILS Turning diameter: 432 mm Turning length: 863 mm Spindle speed: 3,400 rpm Spindle bore: 88 mm Tool turret: 12 stations Tool holder: VDI 40 Swing diameter over bed: 762 mm Swing diameter over cross slide: 432 mm Three-jaw chuck diameter: 254 mm Tailstock quill ISO: 290 Bar capacity: 76 mm Travel Z-axis: 864 mm Travel X-axis: 287 mm MACHINE DETAILS Control: Haas CNC Control Spindle motor power: 22 kW Dimensions & Weight Required space: 3.9 x 2.0 x 1.9 m Machine weight: 7.25 t EQUIPMENT Nodjywhfvjpfx Ahvjwd Technical documentation

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Nedpfx Aeywg Rdehvowd Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning length: 1,300 mm, turning diameter: 1,000 mm, controller model: Siemens Sinumerik 840 D, faceplate diameter: 1,250 mm, Equipment: chip conveyor, TECHNICAL DETAILS Turning diameter: 1,000 mm Swing diameter: 1,250 mm Turning length: 1,300 mm Swing diameter over bed: 1,250 mm Swing diameter over cross slide: 1,000 mm Maximum swing diameter in the gap: 1,250 mm Spindle diameter at front bearing: 500 mm Faceplate diameter: 1,250 mm Chuck diameter: 1,250 mm Maximum torque: 1,200 Nm Spindle speeds: - Speed range 1: 3.15 - 45 - 112 rpm - Speed range 2: 12.5 - 180 - 450 rpm Driven tools speed range: 50 - 1,000 - 2,000 rpm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load: 80 kW Machine weight: approx. 20 t EQUIPMENT Driven tools Various clamping jaws Njdpfxjywgrbo Ahvswd Tool measuring probe Chip conveyor Filtration system Technical documentation

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,291 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 750 mm, table length: 3,200 mm, table width: 1,400 mm, TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,400 mm Z-axis travel: 750 mm Nwsdpjyvub Ujfx Ahved Table size: 3,200 x 1,400 mm MACHINE DETAILS Control type: CNC Control system: Heidenhain Operating hours Spindle run time: 23,291 h Program run time: 27,807 h Control on time: 83,301 h Machine on time: 73,907 h

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Nedpfx Aoyvfvuohvswd Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint User-friendly CNC control High reliability and low maintenance Control: FANUC CNC

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 55,582 h, machine/vehicle number: A0110A0058, controller model: BOSCH PNC-P, laser power: 2,000 W, number of slots in tool magazine: 21, TECHNICAL DETAILS Laser Power: 2,000 W Laser Model: TCF1 Cutting Head Lens Size: 5" Maximum Part Size for Part Chute: 300 x 500 mm Number of Tool and Clamp Positions: 21 MACHINE DETAILS Control Model: BOSCH PNC-P Power-On Hours: 25,582 h EQUIPMENT - Robust C-frame - Coordinate guide with integrated linear scale - 2 clamps - Maintenance-free three-phase servo motors - Brush tables - HI-LAS high-pressure cutting - Rapid processing with SprintLas - Programmable scan feed - Quick-change cutting head device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact nesting table - Rotatable tool holder - Automatic repositioning device with hold-down - Automatic part chute - Sliding part container - Spray lubrication for punch - 2 lubricant containers - Punch slug extraction - Chip bin - Hydraulic quick shut-off - External control panel - 15" TFT color touchscreen - USB port - 3.5" floppy disk drive - Safety device - RJ45 network connection Nedpfxoyv Ddrs Ahvjwd - Network integration - Comprehensive operating manual - Remote diagnostics SPECIAL FEATURES - Thread forming function - Softpunch function - Height-adjustable clamp - Repositioning cylinder - Vibration-dampened installation - Sensor for part chute - Spray lubrication for die - Brush-assisted loading and unloading Note: The machine has already been dismantled (by a certified TRUMPF used machinery partner) and is ready for shipment.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device Nwodpfx Aheyr Uguovsd • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Njdpfstrd T Tjx Ahvowd Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR