Used Closure for sale (506)

Condition: good (used), Benzinger TNL NCS1J Lathe  Manufacturer's machine data, deviations possible.  centre height: 80 mm max. turning length 100 mm max. turning diameter over. bed 220 mm max. revolving diameter over. face slide 140 mm max path length in x 300 mm max path length in z 240 mm Mains connection: 380 V 50 Hz Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Dodjg Icb Espfx Aa Escd Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Dcjdjg Sxmfspfx Aa Ejd Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2007, machine/vehicle number: 1056795, functionality: fully functional, operating hours: 13,432 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, number of slots in tool magazine: 24, controller manufacturer: Haas, overall weight: 6,000 kg, controller model: Haas, coolant supply: 20 bar, feed rate X-axis: 21 m/min, spindle speed (max.): 12,000 rpm, Equipment: documentation/manual, Hello,\n\nDue to business closure, the entire company is being sold.\n\nMachines are in good condition, and tools can be negotiated. Dcsdpowccpasfx Aa Esd

Condition: good (used), Year of construction: 2016, Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for own use in the production process. Dcsdpfohufclsx Aa Esd The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNN 3-Phase Synchronous PM-Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used  Complete plant closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 1964, condition: good (used), Diskus Werke DSH 600/1000 Side Face Grinding Machine  This machine type is a machine with a motor-driven grinding spindle. Clamping and grinding of the workpieces is done with clamping devices adapted to the respective work. The devices are attached to the machine bed. The column saddle, on which the motor spindle is mounted, serves as a feed, dressing and pendulum slide. Manufacturer: Diskus Werke Model: DSH 600/1000 Serial number: 6299 Type: Side surface grinding machine Cooling lubricant: Isocool 1020 BF Coolant volume: 400 litres Concentration: 2.5% (x factor 1.6 ≙ 4%) Year of manufacture: 1964 Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. Dodpfehtyudox Aa Eocd High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2019, condition: excellent (used), Westphal Mechanik C7x Commutator Slotting Centre Machine No. M64127 Year of manufacture: 09/2019 The commutator slotting centre has four machining steps. The following components are approached in the steps: Contact slitting saw Insulating grooving saw Deburrer Brush The Stäubli TS 80 robot with SP1 control has two grippers that pass the commutator to the individual stations. Software data: Marking Builder2 (2D) Marking Builder2 (3D) Logo designer  Dedpfxog H Inzj Aa Eocd Power supply: 3/N/PE AC 400/230 V 50 Hz Control voltage: 24 VDC  More pictures via this link. Further technical data will follow shortly.  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2010, condition: excellent (used), Thumm SU100 P current UV dip impregnation system with exhaust air cleaning system Current UV impregnation is an innovative dip process for low-voltage round wire windings.  In this process, a low DC voltage is applied to the winding and the required process heat is generated very effectively by current flow.  When the heated winding is immersed, the impregnating agent becomes thin and can thus penetrate into the smallest cavities.  With continuous heating, the impregnating resin gels on the hot conductors of the winding, whereby the resin can flow off again after dipping on the cooler stack of sheets. The winding is heated and dried by means of electricity. UV lamps cure the light-sensitive resin on the stack of sheets. Dcsdpfxehuffce Aa Eed The elimination of conventional oven drying saves energy and time. Together with the use of a low-emission impregnating agent, the environmental balance is very positive. Thumm electric UV dip impregnation system Type: SU100 P Stators: max. 250 mm Ø  Connected load: 15 kVA Fuse: 32A Connection: 3 phase 400 Volt 50 Hz Power supplies 2 x 50V / 280 A Thumm aerosol separator 400 V 1.85 KVA Complete plant closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2026, condition: new, Machine provides fully automatic filling process for webbed Bag in Box bags. After inserting the first bag, machine removes the cap, fills the liquid and caps the bag. Then it releases the filled bag and takes another one for filling. This way the filling process is continuous and operator only needs to take the filled bag out of machine. To fill separate Bag in Box or Pouch bags, insert a package into the filler and press START button – machine automatically removes the tap, vacuums the bag, fills it with liquid and closes the bag. Capacity: ~2000 l/h -Perfect for filling various liquids: from juice, wine, milk to broth, oil, soap, etc. -Easy-to-use mechanism does all the work automatically. In addition to that, bags can be supplied to machine manually (separate bags or pouches) or automatically (bags in web). -Suitable for both hot and cold filling. -Machine fills Bag in Box bags in sizes 1–30 L, Stand up Pouch packages in sizes 0,75–5 L. Dsdpoq Nl A Rsfx Aa Escd -Machine fills packages with tap closure. It is also possible to fill packages with different closures on request. -Laser safety mechanism protects limbs by automatically stopping & cancelling the filling process in case of an accident. -Machine is made from stainless steel materials (AISI 304). -Touch-screen control panel and multi-language menu grant easier work. -The error of repeatability of volumes is only ± 0,3 %. -Additional filling table is possible, which slides beneath the main table for filling bags of bigger volume (from 20 to 30 L). -The filler is easy to clean after work with external and CIP cleaning. -Working surface of the table consists of conveyor rollers which are exceptionally easy to clean. -All parts have IP 65 water protection.

Year of construction: 2026, condition: new, Machine fills packages fully automatically by pressing one button. Just insert a package into the filler and press START button – machine automatically removes the tap, vacuums the bag, fills it with liquid and closes the bag. The full filling process of 3 L bag takes ~7 seconds. Capacity – 300 pcs. of 3 L bags per hour. - Bag in Box filler AUTOFLOW is extremely versatile. It is perfect for filling various liquids: from juice, wine, milk, broth, oil, to cream, coffee, ice cream, soap, motor oil, chemicals, etc. - Machine fills Bag in Box bags in sizes 1–30 L, Stand up Pouch packages in sizes 0,75–5 L. It is also possible to fill 220 L bags with a special filling gun. - Suitable for both hot and cold filling. - The filler can have optional interchangeable filling heads. This way with one filler you can fill bags with different closures, such as tap, milk tube, screw cap, simple cap, etc. - Laser safety mechanism protects limbs by automatically stopping & cancelling the filling process in case of an accident. Dedpfx Aaoflrkuo Eocd - High-quality automatic filling head provides stable and smooth filling process. - The filler can have an optional detachable buffer tank for hot filling. It is mounted conveniently on the side of the machine for better inspection and easier washing process. The buffer tank also reduces liquid foaming during hot filling process. - The buffer tank has an integrated liquid level control inside for regulation of overspill and level in the tank. Buffer tank also comes with a connection to our pasteurizer. - Error of volume repeatability is just ± 0,5 %. - Filler comes with a touchscreen panel and multi-language menu. - Easily adjustable filling table allows to easily fill different volumes of Bag in Box & Stand up Pouch packages. - The filler is easy to clean after work with external and CIP cleaning. - Our Bag in Box fillers work in perfect synergy with our Pasteurizers HEAT 1000. They have a special connection between them which prevents liquid from overflowing and ensures easy work.

Condition: good (used), overall weight: 400 kg, Skinetta ASK 450 Tension banding machine Purpose of the machine The tight banding machines in the SKINETTA series are used to band (wrap) individual products or several individual products tightly with polyethylene film. In contrast to shrinking machines, the wrapping film is pulled tightly around the pack before sealing. This tightening is the main advantage of the process. The result is up to 20% less film consumption. Dcsdpfxsp U T Ifj Aa Eed A particular advantage of the patented SKINETTA tightening system is the infinitely variable, fine dosage. The sealing (welding) of the film takes place in a very small space and a clean sealing seam with very small protrusions is created. By connecting a SKINETTAther or SKINETTAshrink heating hood downstream and using a correspondingly wide film, the excess film protruding beyond the container can be shrunk to the side. This process makes the pack even more stable and prevents individual products from falling out of the sides of a grouped pack. Full closure of the packs by sealing, sealing and side folding is possible with appropriate additional equipment. The range of SKINETTA stretch-banding machines comprises 6 basic types for film widths from 25 mm to 200, 290, 440, 590, 790 and 1250 mm. In addition to the single-track version, two to four-track systems are manufactured to increase output. - In the SK series (semi-automatic), the products are grouped on the machine table by an operator. The insertion into the film and the subsequent stretch-banding process is triggered either by a foot switch or a two-hand control, subsequent full automation is possible (except for type SK 200), - In the ASK series (fully automatic), the products are fed, grouped and then banded fully automatically using appropriate additional equipment. A modular system of feeding, grouping, forming and special equipment based on over 20 years of experience allows adaptation to the most diverse customer tasks with tried and tested standard elements. Technical data Machine dimensions (basic machine) Length: 1670 mm Width: 980 mm Height: 1700 mm Table height: 1700 mm Weight: 400 kg Power connection: 400 Power requirement: 6.1 kW Additional equipment: Bar chain conveyor Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 2009, Case packer from 1993 refurbished by the manufacturer in 2009. Automatic packing of boxes with cardboard group by rows and by stacking in a cardboard box with closure. Max. production: 20 to 30 cycles / minute Nordson Problue4 glue generator Label removal Delna DS 14 History, documentation and electrical diagrams available. Spare parts available. Product length 50 - 130 mm Product width 47 - 200 mm Product height 15 - 40 mm Carton length 70-250 mm Carton width 70-250 mm Carton height 40-120 mm Dsdpfx Aaoygnaqo Eocd

Condition: used, axle configuration: 3 axles, first registration: 10/2014, loading space length: 9,600 mm, loading space width: 2,450 mm, loading space height: 2,000 mm, loading space volume: 52 m³, Axles and Suspension, Wheels/Tires 3x9t CB disc brakes, air suspension with lifting and lowering function 2,140 mm wide-track chassis, 1,400 mm spring center distance, 1st axle liftable with valve on chassis, Equipped with 6x 385/65 R 22.5 tires approx. 50-60% tread remaining on Alcoa ALU rims DB 11.75x22.5 ET 120 Chassis Welded lightweight steel frame construction, fifth wheel plate with replaceable 2" kingpin, 2x mechanical Jost landing legs with swivel foot, single wheel mudguards, foldable underrun protection, 2 chocks with holders, Braking system 2-line brake system, EBS, 2 non-interchangeable coupling heads and EBS socket at the front, without connecting cables, Spring parking brake, all test connections accessible from the outside for convenient maintenance Electrics 24 volt, LED multi-chamber lights, side yellow LED marker lights, two non-interchangeable seven-pin sockets, no connecting cables, additionally at front 2x 7-pin socket and 1x 15-pin, 2 LED reversing lights Hydraulics Geoerg front press 250 bar with hydraulic hose and Edbro Type 1" screw coupling Body Rectangular aluminum body made of wear-resistant aluminum hollow profiles, slanted front wall with external hydraulic cylinder mount, Rear wall as combination door (swing and door), rubber gasket, suspended, with automatic hook locking and pre-locking pin, Dedsyi Rcmepfx Aa Eocd additional removable spindle locks for the tailgate, continuous 4 mm thick side wall, 8 mm thick continuous floor, Bulk material deflecting upper edge profile, catwalk with entry access on the left in driving direction, side roll tarp with tension strap closure left, one steel bow center/rear, toolbox at catwalk, holder for broom and shovel on the left, 2 grain chutes integrated into the tailgate, removable grain chute with sack, etc. Unladen weight: 6,180 kg Offer and images non-binding.

Condition: used, Year of construction: 2020, Becker BZ-2 - Packaging System - 2 identical, mirror-inverted packaging lines available - without cutting machine - Year of manufacture: 2020 The system first trims the front of the cardboard to remove any possible transport damage. After trimming, a minimum side trim of 30 mm is made on both sides. Additionally, if required, a corner is cut from the cardboard, depending on the Fefco type. Finally, the cardboard is scored along the folding lines and discharged from the machine. The resulting waste material is removed from the system via a waste conveyor located underneath the machine. At the machine's discharge, a conveyor belt transports the waste into a container. If the side trim sections are too long, they must be cut within the system to ensure they can be smoothly conveyed out of the line. The blanks and products are transported to the folding station, where the cartons are erected and filled. In the Box Closing Unit, the cartons are sealed, labeled, and conveyed out of the system. Machine components (see schematic): (1) Buffer Table | (2) Conveyor Pack System | (3) FT30 Folding Table | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) FT30 Folding Table | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor Technical Data: Packaging Dimensions (top closure): - min. carton dimensions LxWxH: 500 x 120 x 100 mm - max. carton dimensions LxWxH: 2250 x 420 x 320 mm - max. product weight: 50 kg Packaging Dimensions (side closure): - min. carton dimensions LxWxH: 300 x 150 x 120 mm - max. carton dimensions LxWxH: 1050 x 620 x 470 mm - max. product weight: 50 kg Installation: - Operating voltage: 400 V / 50 Hz - Rated current: 47 A - Pre-fuse: 63 A - Connected load: 32.5 kW - Control voltage: 24 V Dcedpfx Ajygipmsa Esd - Compressed air supply: 6 bar - Air consumption: 10 l/min - Sound pressure level: < 70 dB(A) - Machine dimensions WxHxD: 21,260 x 4,000 x 18,030 mm

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Dcjdpfx Asqakhuea Eod Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Condition: used, System: chamber filter press used Size of plate: 400x400 mm Chambers: 30 Filterplates: Polypropylene Filter cloths: as an option Outlet: open Filter surface: approx. 7,5 m² Volume of filtercake: approx. 90 dm³ Working length: approx. 1512 mm Filter pressure: 15 bar Closing pressure: Min. 380 bar, max. 410 bar Plate closure: electro hydraulic Plate transport: manual Dsdpfx Aeb E A Efea Eecd Pumps: as an option Special services: Refurbished service to customer optional. The system goes through a pre-delivery service check or a complete overhaul. Rent or Buy: Machine can be inspected at our factory You want to buy or rent this plant? Talk to us, we will gladly available to you. We can offer Spare Parts, Accessories and Service for your Chamber Filter Press - Rittershaus & Blecher, Netzsch and more Filter Press Brands.

Condition: used, System: Membrane filter press / chamber filter press, used Type: Andritz 800/75 membrane chamber filter press Application area: Sludge dewatering, sludge treatment Year of manufacture: 2008 Filter plate format: 800x800 mm Number of plates: approx. 75 Filter plates: PP Dodpfxowqygfe Aa Eocd Cake thickness: 30 mm Filter cloths: optionally available, tailored to the medium Press volume: approx. 1000 dm3 Filter pressure: approx. 15 bar Plate closure: electrohydraulic Control cabinet: optional Purchase or rental: Inspection of the system at our site by arrangement.

Condition: ready for operation (used), System: Netzsch 800 /80 sidebar Size of plate: 800 x 800 mm Chambers: 80 Filterplates: Polypropylene Filter cloths: as an option Outlet: open Filter surface: approx. 88,48 m² Volume of filtercake: approx. 1272 dm³ Working length: approx. 4656 mm Dcjdped E Dgkjfx Aa Ejd Filter pressure: 15 bar Closing pressure: Min. 380 bar, max. 410 bar Plate closure: electro hydraulic Plate transport: manual Dimensions: LxBxH approx. 5300 x0900 x 1040 mm Weight filterpress: approx. 4 t Underframe: available from stock as optional accessories Dimensions: LxBxH 8000 x 1050 x 2020 mm Weight: approx. 5 t Control cabinet: yes Pumps: as an option Accessories: mixing tank optionally available as a special accessory 3.00x1.50x2.20 m Special services: Refurbished service to customer optional. The system goes through a pre-delivery service check or a complete overhaul. Rent or Buy: Machine can be inspected at our factory We can offer Spare Parts, Accessories and Service for your Chamber Filter Press - Rittershaus & Blecher, Netzsch and more Filter Press Brands.

Condition: used, Due to the closure of our sawmill, we have various machines and accessories for sale (see pictures). If you are interested, please feel free to contact us. Dodjyi Erpjpfx Aa Ejcd

Condition: new, maximum load weight: 11,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 3,330 mm, Year of construction: 2025, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ KROLL Suction-Pressure Tank Trailer ADR (internal no. #518) Type K 14.0/36 PEAH --- Tank code L4BH Suitable for the collection and transport of liquids and sludges. Total capacity approx. 14,000 liters (air volume) Sludge chamber (behind piston) approx. 12,000 liters (air volume) Tank material: S355J2G3 Shell wall thickness: 7 mm Flange pair "LONG LIFE" Closure bottom can be opened by 2 hydraulic cylinders Closure bottom locking with tension claws, hammer head bolts and galvanized linkage Pneumatic lid locking Tank level indicator via internal float and external display scale Discharge apron made of aluminum Discharge by free flow and via piston Piping and fittings in DN100 Dedpfx Aoxc S Aaja Eecd Suction line DN100 Operator station rear right Chassis 9t BPW axles, air suspension with lift and lower valve for each axle Ball-bearing slewing ring and certified long drawbar Tires 4x 385/65R 22.5 Michelin Plastic mudguards Rear impact protection Side underrun protection 2 wheel chocks Dual-line air brake system with WABCO EBS, ABS, and TSS Hose lockers left and right on superstructure Toolbox LED work lights LED beacon lights 4x LED area lights Advertising panels left and right, 3000 x 650 mm For further details and/or pictures, please contact us directly. You will find a wide selection of other vehicles for SALE or RENT at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively in accordance with our terms and conditions and excludes any warranty.

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Dsdpfsxf Sn Ijx Aa Eecd Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Dodpfx Aeyiw T Eja Escd Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Kingpin 2" screwed into an 8 mm thick 'light' plate. Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding

Condition: used, axle configuration: 3 axles, first registration: 06/2013, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 46 m³, Chassis light version In aluminium (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width 1,600 mm Axles and Suspension Disc brakes 430 mm “off-road version” SAF-Intradisc light axle assemblies, 3 x 9 t with SAF air suspension, air bellows centrally mounted to chassis longitudinal member 3rd axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, lift-lower valve, BVA brake wear indicator Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 60-70%, with silver steel rims, 11.75x22.5 ET 120, UNI wheel bolts King pin 2" - bolted into an 8 mm thick plate Dedpfeyiw T Sex Aa Ejcd Landing gear Mechanical landing legs, 2 speeds, 2x20t support load, with swing foot for air suspension Brake system According to ECE regulations, dual-circuit Wabco system, spring-loaded parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard Infocenter, aluminium air tank system Electrical system According to StVZO guidelines with 2 five-chamber Aspöck type lights, 24V system with 2x7 and 1x15 pin socket, with side marker lights, 2 separate halogen reversing lights, all air and electrical lines neatly laid in plastic pipes Tipping body / Dump body “smooth construction” Fully welded inside Aluminium dump body, side walls with 30 mm thick plank profiles (2-3 mm) welded 600 mm wide, floor 6 mm thick, high wear-resistant alloy (5383H34/HB 110) with 45-degree bevel to side wall, front wall 4 mm reinforced, inclined design, rear wall designed as a universal door, straight design with 2 wing doors in 2/3–1/3 configuration and a grain chute, ALU round profile welded laterally and below to seal door gap on rear doors, rear doors partly clad with smooth aluminium. Universal door operated automatic-pneumatic, lockable with separate lever, aluminium rear brace pivotable, two hold-downs with rubber buffer on the dump body fixed to the frame at the front wall. Hydraulic system Tipping cylinder with "rotule" suspension (light) Hydraulic cylinder mounted on front wall with a working pressure of 150 bar, manufacturer Edbro, with approx. 2.5 m hydraulic hose and loose 1" half, tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap over the full vehicle width attached to underrun guard, no spare wheel holder, aluminium, foldable side underrun protection right side, large toolbox type 860, approx. 3 m aluminium ladder, 3 central aluminium swing bows raised approx. 150 mm, additionally a centrally mounted bow holder for positioning up to 2 bows to widen the loading width, roll tarpaulin with central light strip and separate reinforcements in wear areas, approx. 660 g/m² quality with roll tarp system, continuous rubber cord at the rear closure of the tarp with two tension hooks to be fixed on the rear swing bow, catwalk on the frame in chassis colour with access left and right, tarpaulin closure to the side with quick-release fastener, rear tarp closure with welded rubber cord to prevent water ingress, robust foldable underrun protection in aluminium, 2 "Clear-Pass" spray flaps on mudguard according to EU standard, aluminium grain hopper fixed to the side of the frame with plan bag, holders for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,960 kg Offer and images subject to change.

Condition: new, empty load weight: 6,400 kg, maximum load weight: 11,600 kg, overall weight: 18,000 kg, axle configuration: 1 axle, loading space length: 10,540 mm, loading space width: 2,490 mm, loading space height: 2,773 mm, loading space volume: 72 m³, tire size: 235/75 R17,5 (Doppelbereifung), color: white, Year of construction: 2025, Equipment: ABS, tail-lift, Unladen weight: 6,400 kg, permissible gross weight: 18,000 kg, cargo space (L W H): 10,540 mm x 2,490 mm x 2,773 mm. Tire size: 235/75 R17.5, cargo space volume: 72 m³, 1st axle: , standing aluminium tail lift Dhollandia 2,000 kg as rear closure, Electronic Braking System (EBS), forced steering, connection plugs 1x15 and 2x7-pin, battery box. Our entire vehicle portfolio can be found at . Financing required? With our Value Added Service, we offer you tailored financing options, full service, and telematics solutions. We will be happy to advise you. Dcsdpeyivhzefx Aa Esd

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 031223510029, Year of construction: 2024, operating hours: 573 h, total length: 650 mm, total height: 1,200 mm, total width: 610 mm, type of input current: AC, overall weight: 145 kg, input voltage: 230 V, input current: 8 A, For sale: A virtually unused SINTERIT Lisa X SLS 3D printer, operated for only 573 hours. The set includes: - Sinterit LISA X 3D Printer - Sinterit Studio Advanced ("slicer") - Flight Case for LISA X Technical Advantages: Exceptionally fast printing, with speeds of 10-14 mm/h, allowing a full bed with complex shapes to be printed in just 34 hours. Larger build volume with a bed size of 180 x 130 x 330 mm. Wide range of materials, from highly durable and flexible options to specialized materials like ESD powder. High print quality with fine details. Open environment with over 50 adjustable printing parameters, enabling flexible management and the use of external materials. Dedpfjwi Sivex Aa Ejcd We Offer: Option for personal handover in the Czech Republic or professional shipping internationally. 14-day money-back guarantee and the possibility of a test print. 500 EUR discount for quick closure within 7 days. Contact us for more details or to arrange a viewing!

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,783 kg, axle configuration: 3 axles, first registration: 01/2022, total length: 13,620 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2022, Equipment: full service history, power assisted steering, Technical specifications ROTOS SCB running gear. SCB axle 9 t, SP2040, FM1300,120 offset disc brakes 430 mm. EBS 2S/2M, with roll stability program. Light system 24V with multi-chamber light. Tyres 385/55R22.5. Plastic toolbox with cover holder, sleeves and drawer behind the unit. Pallet stop straight, on both sides on outer frame 19 mm high, 2,460 int. dim. Schmitz Cargobull floor sealed all around and in-between the floor stops. Row(s) alu support laths with connection profile. VARIOS sliding curtains 880g/m² with reinforcements for load securing. TIR cord with holder incl. bulkead cord for T1 transit. Tarpaulin quick tensioner, front. Curtain with anti-theft protection 1800mm high. Rear doors: Anodized. Steel corner posts: galvanized. Red reflective tape surrounding rear closure. Contour markings on side curtain, colour: reflective white. Dcsdsyf Er Ujpfx Aa Eod