Used Clip for sale (266)

Condition: used, Year of construction: 1991, Technical details: operating pressure: 160 bar distance between columns: 2000 mm throat: 1000 mm operating pressure: pneum. min/max 6/8 bar Blodpou Icxdofx Amron operating pressure: hydr. min/max 160/210 bar voltage: 380/50 V /Hz table surface area: 1900x1000 mm height over floor: 1000 mm tool clamping area: 1600x350 mm quantity of oil : 400 l total power requirement: 25,0 kW weight of the machine ca.: 7,1 t dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool) On the table are mounted the material intake and the sliding unit for the cut and hole punching. equipment: - light curtain - hydraulic pack - electric cabinet - control panel - workpiece counter - manual- and automatic operation possible - emergency stop On sale as is. i.D. *

Condition: new, Technical data for the shelf racking: Racking system: META Type: CLIP Technical data for the installation: Number of racking rows: 01 unit Rack length: 2,150 mm Number of bays per racking row: 02 units Number of mesh shelf panels: 05 units per bay Scope of delivery includes: 03x upright frames, new Material color: Sendzimir galvanized Frame profile dimension: 50 x 40 x 1 mm Adjustment grid: 25|25 mm incl. base plates, end caps, and strut Uprights are pre-assembled 2,000 mm high 835 mm deep 10x mesh shelf panels, new Material color: Sendzimir galvanized Overall width: approx. 1,000 mm Overall depth: approx. 800 mm Frame profile dimension: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Support beams (03 pieces): 750 x 18 mm Weight/unit: approx. 5.14 kg Max. load per panel: 200 kg, with evenly distributed load 06x leveling plates, new Dim.: 76 x 58 x 2 mm Weight/unit: 0.064 kg Bodpoxdwxijfx Amroln Material color: Sendzimir galvanized 40x shelf supports, new Weight/unit: approx. 0.014 kg Material color: Sendzimir galvanized 01x cross brace, new Material color: Sendzimir galvanized 01x load capacity sign with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should you require transport or shipment beyond this, additional costs will apply, which can be inquired individually depending on the delivery location and scope of delivery.

Condition: new, functionality: fully functional, NEW GOODS Price plus VAT. The goods are also available in other quantities and versions. This package includes: 3 x uprights, each 220 cm high x 40 cm deep 12 x shelves, each 130 cm x 40 cm 48 x shelf supports 2 x diagonal braces with tensioners This results in a single row with 2 bays and 6 levels per bay, total length approx. 2.65 m 400m available immediately! Manufacturer: META Clip Type: Shelving rack Condition: New Bljdeyh Drcspfx Amrjn Height: 220 cm Length: approx. 1 x 266 cm Frame depth: 40 cm Assembly: Boltless system Shelf load: 150 kg per shelf Accessories such as: Floor fixing kit Connectors Load capacity warning signs Collision protectors Guard rails Wire mesh shelves Rear mesh panels Depth beams Separating rails ...and much more. Just ask us!

Condition: like new (used), Vacuum filler Type: Vemag Robot HP 25 E Hopper capacity: 350 liters, single-piece Filling mechanism: bushing double screw Steplessly adjustable filling speed: 0–100% Production capacity: up to 25,000 kg/h, depending on product and fill type Control: PC graphic Portion weight: 5 to 60,000 grams Compatible for use with clipping machine Compatible with Vemag grinder 982 Vacuum pump: 40 m3/h Loading device for standard bins Machine dimensions in mm: Width: 1400.0 Length: 2400.0 Height: 2180.0 Rated power: 31.0 kW Voltage: 380 V, 50 Hz Machine weight: 1450 kg Blsdpey Hhi Hjfx Amrjn

Condition: new, Technical data for the shelving rack: Shelving system: META Type: CLIP Technical data for the installation: Number of rack rows: 01 pcs. Rack length: 2,150 mm Number of bays per rack row: 02 pcs. Number of mesh shelves: 05 pcs. per bay Scope of delivery includes: 03x upright frames, new Material color: Sendzimir galvanized Frame profile dimensions: 50 x 40 x 1 mm Adjustment pitch: 25|25 mm Incl. base plates, end caps, and cross-brace The uprights are pre-assembled Height: 2,000 mm Depth: 535 mm 10x mesh wire shelves, new Material color: Sendzimir galvanized Total width: approx. 1,000 mm Bledpfexdmb Hjx Amron Total depth: approx. 500 mm Frame profile dimensions: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Cross bars (03 pcs.): 450 x 18 mm Weight/pc.: approx. 3.88 kg Max. load per shelf: 200 kg with evenly distributed load 06x leveling plates, new Dimensions: 76 x 58 x 2 mm Weight/pc.: 0.064 kg Material color: Sendzimir galvanized 40x shelf supports, new Weight/pc.: approx. 0.014 kg Material color: Sendzimir galvanized 02x cross braces, new Material color: Sendzimir galvanized 01x load sign With information on bay and shelf loads, manufacturer, and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for pickup. Any requested transport or shipping of this item is subject to additional costs, which can be quoted separately depending on the place of delivery and scope of delivery.

Condition: good (used), Duplo Docucutter DC-645 Creaser, cutter The machine is fully operational, ready for production. Description: The DC-645 has been designed for the growing needs of fast execution of such orders as: business cards, invitations, postcards, leaflets, covers, folders. Docucutter DC-645 cuts lengthwise and crosswise as well as creases, perforates in one pass, ensures continuity of production with minimal operator input. All machine settings can be adjusted automatically – from the settings of the cutting knives, creasing beams to the setting of the creasing depth. When cutting out the work, clippings are created, which, thanks to appropriate control, go directly to the basket located in the lower part of the device’s housing. With the DC-645 device, we will perform such works as: Postcards Bedpfx Asztn E Ejmrsln Cut and creased business cards Flyers Brochures Book covers CD/DVD covers Menu Mailing materials Automatic discharge of clippings into the basket Automatic adjustment of creasing depth paper size: 370×650 mm Min. paper size: 210×210 mm Minimum output format: 48×85 mm Paper weight: 110-350 g/m2 Machine weight: 360kg

Condition: new, Year of construction: 2025, Sliding clip formers are used to produce fixation sliding clips for double standing seam roofing panels. Before installation roofing panels have to be made using roll former roofing machines. After finishing of panels production and preparing roofing works panels can be installed on roofing place with special fixation clips. Those clips, depending on design, could be fixed or sliding ones. Fixed clip has simple and cheap design so it can be good for small roofs that doesn’t have long length panels. Sliding clip are good for big roofs with different designs and long-length panels. Sliding clips can move and self-find perfect position so not be damaged and safe for roof while temperature expansions. We offer punching presses for making both fixed and sliding clips. We make sliding clip formers for 25, 27 or 39mm clip highs For sliding expansion clips productions there have three presses to be used. First sliding clip bottom part press is used for punching bottom part of sliding clip with fixation round holes and connection oval hole. At the same time this press cuts metal strip with necessary length. Blank for clip production is easy to get using manual guillotine or cut-to-length slitting machine. Second sliding clip bottom part bender is used for bending of sliding clip bottom part to 90 degrees angle. So, after this operation bottom part is ready. Third clip former makes top part of sliding clip at the same time forming and bending it. Bjdpoqxalxjfx Amreln After producing bottom and top part of sliding clip you can easily connect it to one working sliding clip. So using sliding clip formers that we offer you can easily make expansion clip and use it while double standing seam roofing installation without any unnecessary deformations. Maximum metal thickness you can work with -1mm. To get more information about sliding clip former we produce please contact our sales department.

Condition: new, Technical specifications for the shelf rack: Racking system: META Type: CLIP Technical details of installation: Number of rack rows: 01 pcs. Rack length: 1,400 mm Number of bays per rack row: 01 pcs. Number of mesh shelves: 05 pcs. per bay Scope of delivery includes: 02x Rack uprights, new Material color: Sendzimir galvanized Frame profile dimensions: 50 x 40 x 1 mm Adjustment grid: 25|25 mm Incl. base plates, end caps and shottsteg Uprights are pre-assembled 2,000 mm high 835 mm deep 05x Mesh shelves, new Material color: Sendzimir galvanized Total width: approx. 1,300 mm Total depth: approx. 800 mm Frame profile dimensions: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Support bars (03 pcs.): 750 x 18 mm Weight per piece: approx. 6.62 kg Max. load per shelf: 200 kg, with evenly distributed load 04x Levelling plates, new Dimensions: 76 x 58 x 2 mm Weight per piece: 0.064 kg Material color: Sendzimir galvanized 20x Shelf supports, new Weight per piece: approx. 0.014 kg Material color: Sendzimir galvanized 01x Cross brace, new Material color: Sendzimir galvanized 01x Load identification sign Displaying bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Bledpfxjxd A R Ds Amrjn General information about the item: This item is only offered for collection. Any requested transport or shipping of this item involves additional costs, which can be individually requested from us depending on the delivery location and scope.

Condition: new, Technical Data for Shelf Racking System: Racking System: META Type: CLIP Assembly Technical Data: Number of Rack Rows: 01 unit Rack Length: 1,100 mm Number of Bays per Rack Row: 01 unit Number of Mesh Grating Shelves: 05 units Scope of Delivery: 02x Uprights, new Material finish: Sendzimir galvanized Frame profile dimensions: 50 x 40 x 1 mm Adjustable pitch: 25|25 mm Incl. base plates, end caps, and reinforcing bar Uprights are pre-assembled 2,000 mm high 535 mm deep 05x Mesh Grating Shelf, new Material finish: Sendzimir galvanized Bedpfx Ajxdkhqsmrsln Total width: approx. 1,000 mm Total depth: approx. 500 mm Frame profile dimensions: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Support bars (03 pieces): 450 x 18 mm Weight per piece: approx. 3.88 kg Max. load per shelf: 200 kg with evenly distributed load 04x Levelling Plates, new Dimensions: 76 x 58 x 2 mm Weight per piece: 0.064 kg Material finish: Sendzimir galvanized 20x Shelf Supports, new Weight per piece: approx. 0.014 kg Material finish: Sendzimir galvanized 01x Cross Brace, new Material finish: Sendzimir galvanized 01x Load Sign Indicating bay and shelf load, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your Contacts in our Company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General Information about the Item: This item is offered for collection only. Any transport or shipment of this item beyond collection will incur additional costs, which can be requested separately depending on the delivery location and delivery scope.

Condition: new, Technical data for the shelf rack: Shelving system: META Type: CLIP Specification for configuration: Number of rack rows: 01 pcs. Rack length: 2,750 mm Number of bays per rack row: 02 pcs. Number of wire mesh shelves: 05 pcs. per bay Included in delivery: 03x Upright frames, new Material color: Sendzimir galvanized Frame profile dimensions: 50 x 40 x 1 mm Adjustment pitch: 25|25 mm incl. base plates, end caps and gutter bridge The frames are pre-assembled 2,000 mm high 835 mm deep 10x Wire mesh shelves, new Material color: Sendzimir galvanized Total width: approx. 1,300 mm Total depth: approx. 800 mm Frame profile dimensions: 40 x 25 x 1 mm Mesh size: 95 x 50 mm Crossbars (03 pcs.): 750 x 18 mm Weight per piece: approx. 6.62 kg Max. load per shelf: 200 kg, with evenly distributed load 06x Level shims, new Dimensions: 76 x 58 x 2 mm Weight per piece: 0.064 kg Material color: Sendzimir galvanized 40x Shelf supports, new Weight per piece: approx. 0.014 kg Material color: Sendzimir galvanized 02x Cross braces, new Material color: Sendzimir galvanized Bedpfx Asxd Rzqemrjln 01x Load sign with information on bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for pickup only. Any transport or shipping of this item requested beyond that will incur additional costs, which can be individually inquired according to the place of delivery and scope of delivery.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 981, overall weight: 600 kg, total length: 1,800 mm, total height: 1,900 mm, total width: 1,060 mm, warranty duration: 6 months, Equipment: type plate available, EC 101 IS GHD Hartmann Bread Bag Clipping Machine (Clipsealer) One of the most reliable devices to significantly increase work efficiency and positively impact production processes is the advanced EC 101 I clipping machine, designed by GHD HARTMANN. The machine features an independent impulse drive, allowing seamless integration with both horizontal and vertical packaging machines. The device also operates with an intermittent cycle, eliminating the need for synchronization with an upstream packaging machine. Bledey N Tlfopfx Amrsn Technical data: - Output: approximately 60 packs per minute (depending on the specific product) - Dimensions: length approx. 1800 mm, width approx. 1060 mm, height approx. 1900 mm, conveyor height approx. 950 mm - Weight: 600 kg - Product dimensions: length up to 400 mm, width up to 220 mm, height up to 120 mm - Capacity: up to 3,600 packs/hour - Packaging material: pre-made film or paper bags (paper only with clip closure) - Operating side: right 6-month warranty.

Condition: good (used), Tipper Tie RS4202 automatic clipper for sausage / salami / ham / pet food production. Looks to be in lovely condition. We can supply a Handtmann VF612 or VF628 vacuum filler to suit if required. Bedpfx Aelfff Temrsln

Condition: used, This listing is for the Gilson PIPETMAN L P20L 2-20uL Single Channel Pipette Light Yellow The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Bodexv Drmspfx Amrsln Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Year of construction: 2010, condition: ready for operation (used), number of axes: 3, This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine. Additional equipment • Joystick box • Tailstock Bodpfex D D Abjx Amrjln • Spring-loaded tailstock • Clamping lugs: 35–37, 39–41, 55–57 • Clamping profile strip with end-face connection • Clamping profile strip without end-face connection • Connector with connection slots • MAG1 mounting • Spring clip 15° (short) • Spring clip 15° (long) • Threaded clamping holder • 30 mm cylindrical pin • 40/10 mm guide comb with longitudinal groove only • 120° prism with spring clip • The maximum length measurement deviation in the XY plane is 2.5 + 0.006 µm • Measuring range (X/Y/Z): 200 x 250 x 100 mm • Resolution: 0.5 µm (0.0005 mm) • Accuracy XY: (2.5 + 0.006 µm) • Accuracy Z: (5 + 0.006 µm)

Condition: ready for operation (used), Year of construction: 1996, Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025. Blsdpfeu Rc R Ssx Amrsn

Condition: used, This listing is for the PIPETMAN L P1000L 100-1000uL Colour-code BLUE The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Blodsxv Draepfx Amrsn Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, This listing is for the PIPETMAN L P10mL 1-10mL Colour-code Light Blue The unit is in full working condition and is ready for immediate use Bedexv Dq Nopfx Amrsln Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: used, plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm blade length 200 mm angle adjustable from - to 30 - 120 Grad no. of strokes 60 Hub/min oil volume 60.0 ltr. table: 1000 x 800 mm total power requirement 2.62 kW weight 800 kg range L-W-H 1000 x 1500 x 1440 mm Furnishing: - robust hydraulic notching machine, with adjustable angle Bodpfxoxab N Rs Amrsln - Adjustment range 30 - 120 degrees * Adjustment with the 2x front handwheels - hydraulic clamping and locking - Infinitely adjustable cutting depth, with digital display - 2x locking accuracy stop, with stop bars - Stripper for sheet metal cutting - Collecting container for clippings - Freely movable foot pedal for triggering the stroke

Condition: used, plate thickness 4.0 mm ST plate thickness 3.0 mm VA table-size 1200 x 780 mm blade length 200 x 200 mm Bsdsxaavpspfx Amreln strokes per minute ca. 60 min angle adjustable from - to 15 - 150 Grad engine output 4.0 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1700 x 1000 x 1500 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface * to avoid 'tilting' or 'slipping' of the metal sheet - 2x staking stops * with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual * Machine link : ?machineno=1008-9397092

Condition: used, This listing is for the Gilson PIPETMAN P2 0.2-2uL Colour code Red Bjdpfexv Dqvjx Amrjln The unit is in full working condition and is ready for immediate use Patented volume locking system preventing accidental changing of volume setting Adjustable tip ejector button to adapt to both right- and left-handed users Clip mechanism allows easy and safe removal of tip ejector Lowest pipetting forces on the market give increased comfort even when pipetting for long periods GLP features include 2-D bar code for traceability

Condition: excellent (used), functionality: fully functional, Strödter Vacuum Lifter on Rail System – New Price Includes 2x Strödter Zybomat ZP 60 adjustable vacuum lifters on Rollyx rail system. Manually movable. Bedpfxexwwh Re Amrjln Line 01: 14,300 mm length Line 02: 7,370 mm length Both lines have a width of 6,000 mm Lifting capacity is adjustable depending on the setting. “Old price We have a total of 2x of these vacuum lines for sale at €35,000 each. (The lines have already been dismantled and are ready for transport). There are also 2x separate vacuum lifters for sale at €6,800 each.” “Old price One deal for all 2 lines and 2 extra vacuum lifters: €75,000 best price, available only for the complete set of the 2 lines and 2 extra vacuum lifters.” —- Please note: new price for all: €50,000 excl. VAT. —- Prices are excl. VAT, excl. loading with forklift (€250 per loading), and excl. transport. The YouTube clips: These are example videos, not exactly the same but the same brand.

Condition: new, Year of construction: 2025, Fixed clip former CF-25 was designed by our company for fixed cleat production of standing seam roofing panels with a seam high of 25mm. Following clip is the main fixation element that ready roofing panel fastens to the roof base. A fixed clip has many advantages, such as simple design, low production cost, easy installation. We make clip formers for 25, 27 or 39mm clip highs. As blank, you can use metal in strips of the required width with up to 0.8 mm thickness. You can make product clip in one easy step -just need to put blank metal into the press and activate the press with manual handle system. Clip former makes clip bending and necessary holes cut in one-step operation. Thus, with our clip production press customer has opportunity to produce a fixed clamp in numbers, using it for his own needs or to sell it for other roofing installation companies. Fixed clip former is lightweight one, which allows taking device to working places and transport it easily. Bledpfx Amoqxadborsn For productive work, clip former must be securely fastened to a flat surface. Fixed clip former press CF-5 made by our company will save your time and money from looking for standing seam fixation elements suppliers, will help you effectively organize your product production and will make roofing works more convenient. We also manufacture sliding clip formers. As an option we can make fixed clamp former for standing seam panels of 25, 27mm or 39mm lock high, those panels you can make with following machines: Standing seam roofing machine F3; Roof panel standing seam roll forming machine F3-27 with clip relief; Standing seam roll former F3-39;

Condition: used, functionality: unexamined, Batch of pallet racking with beams and boards. Assembled length approx. 35 linear meters. Construction height 400 cm. Uprights: 14 pcs | width 100 cm, height 400 cm Beams: 71 pcs | width 270 cm Bodpfjw Hyzuox Amrjln Wooden boards for use in beams: 31 pcs Includes fixing clips. Only sold as a complete lot.

Condition: new, 60.06 m shelving, 60 cm deep , Workshop shelving , Storage shelving , Manual storage , Push-in shelving , Small parts storage Data : - Height : approx. 200 cm - Depth : approx. 60 cm - Length : approx. 60.06 running meters Shelf offer 60.06 running meters consisting of: - 0061 x upright approx. 200 x 60 cm, disassembled (incl. 2 x base & 2 x cover cap). - 0300 x shelf approx. 100 x 60 cm. - 1200 x shelf holder. - 0061 x Diagonal 1176 mm ( for crossing ). - 0061 x turnbuckle ( for intersection ). - Manufacturer: META CLIP. - Load: 150 kg per shelf, with evenly distributed load. - Levels: 5 x storage levels. - Surface: sendzimir galvanized. - New from stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of 2€/net per piece. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 8000,00 € net Bledpfx Aez H Nhxjmrjn plus legally valid VAT. You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: good (used), Year of construction: 2011, Approx. 84 bays of industrial shelving, Meta, shelves 1.25m wide, 0.60m deep, frame height 2.50m - used: Price ex works: €6,500 (net), disassembled, packed and loaded. Manufacturer: Meta Type: Slot-in system Year of manufacture: 2011 Approx. 4 shelves per bay Dimensions per shelf: approx. 1,250mm x 600mm Frame height approx.: 2.50m Bedezpf D Djpfx Amroln Load capacity per shelf: 230kg Bay load capacity: 1,030kg Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area Note: The photo shows more shelves per bay than are actually available!