Used Cleaning And Disinfection Machine for sale (70,740)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. Bodpfx Aovvuzceb Iewk After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-009, Rotary spray cleaning machine YM-850 The YM-850 rotary spray cleaning machine is designed for efficient cleaning of industrial parts with hot pressurized water and biodegradable cleaning agents. This machine has very low running costs and low consumption. The machine frame and body are made of high quality corrosion-free stainless steel. This machine is the right choice for cleaning oil, grease and production residues on the surface of workpieces as well as for corrosion protection applications. The YM machine has stainless steel pump, spray nozzles, heating elements and motorized basket design as standard. - Spray cleaning system for small to medium batch sizes, - for workshop, maintenance or intermediate cleaning - Cleaning with hot water - Spray cabin as a top loader Technical details: Basket diameter: 700 mm Bwodpjtwmxyofx Ab Iek Loading height: 380 mm Tank capacity: 120 liters Pump pressure: 8 bar Heating: 7.5 kW maximum loading weight: 120 kg Connection: 220-380 volts - 3 phases Timer: 0-30 mins Thermostat: 0-60 C° Stainless steel body: 430 AISI Filter cups: 2 pieces - 2-3 mm perforation Internal filter: 100µ

Year of construction: 1993, condition: excellent (used), 1 x parts washing machine Armleder W 25 Year of manufacture: 1969 Technical data: Drum dimensions: 330 x 350 mm Bodpfjnl Ekrox Ab Iowk Installation dimensions: l: 0.8 x w: 1 x h: 1.1 m The machine can be viewed at our warehouse under power at any time.

Condition: used, Year of construction: 2011, operating hours: 762 h, functionality: fully functional, fuel type: electric, drive type: Elektro, sweeping width: 1,100 mm, Sweeper-scrubber machine Condition: Refurbished without warranty Technical condition: Very good Battery voltage: 24V Battery capacity: 240Ah Bodpfx Aoxl H Uvjb Iswk Battery type: Gel Battery condition: 60 - 80% Description: The machine has been workshop tested, passed new UVV inspection, all sweeping rollers and brushes are new, with warning beacon.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 2879, We offer this used Colussi Ermes SRL L001-027 steam-powered trolley cleaning machine (smoking/cooking) made of stainless steel, year of manufacture 2016. If you have any questions or need more information, please do not hesitate to send us a message or call us. Bjdpsydn Shsfx Ab Iowk

Condition: new, Year of construction: 2026, functionality: fully functional, CONVEYOR BELT TUNNEL WASHING MACHINE - The components to be clean are carried on a continuos moving stainless steel belt conveyor or a stop and go pallet conveyor. The design transfer time/speed and the tunnel dimensions are design in accordance to customer’s cycle time and production need. The synergy between chemical, thermal and mechanicals actions, enable to create an accurate and high efficient washing removing all contaminants from the components with excellent cleaning results. Bodewdfnzjpfx Ab Iowk The tunnel can be easily inspected thanks to doors installed along the tunnel in correspondence with each active station, the pumping system and filtering devices through stainless steel spray manifolds achieve maximum treatment accuracy and efficiency with stainless steel nozzles of suitable capacity. The spray pressure is controlled by pressure gauges and in regulated by ball valves.

Condition: like new (used), Year of construction: 2018, Danube Industrial Laundry Dryer Powerful dryer with condesator Bwodpfx Ajc Utidsb Ijk for hotels, pensions and large families We also have a suitable washing machine 32 Ah connection TOP CONDITION CAN BE TAKEN IMMEDIATELY IN OPERATION WITH QUESTIONS PLEASE ANNOUNCE VIELLENDAN IN ADVANCE

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 6000 CNC KÖŞE TEMİZLEME MAKİNASI, - Conforms to CE standards - It is a semi-automatic CNC machine designed to clean the burrs formed after welding of PVC windows, sashes, door frames and other profiles welded at 90 angles. - The process of cleaning the bottom, top, and outer surface of the profile independent of each other7 Bwjdpfxsrbf R Te Ab Iok - Touch screen panel - Easy memorization process - Comfortable user-adjustable processing speeds - Ease of writing the program of the profile to be cleaned thanks to the special program in the machine - NC control system with PLC unit - User y-z axes on a joystick wristwatch - Easy program creation and fine-tuning - Average processing time of the machine in one corner is 5-8 seconds - 400 - 500 frames can be cleaned in 8 hours of average operation - Unlimited program installation memory - Daily monthly production report dashboard - The machine has 2 servo and 1 Hertz motor - Ø200 mm Diamond tooth saw - All PVC profiles can make angles and radii and have circular interpolation motion - Providing comfort during movement by preventing scratching of profiles thanks to the front brush stand system

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 601 PVC Köşe temizleme makinesi ( 3 Bıçak), - Complies with CE standards. - Cleaning the corners of PVC profiles after welding Bodpfx Aborbid Is Iewk - Cleaning the upper and lower surfaces of the corners - Possibility to separate surface and corner cleaning for acrylic profiles - Fully automatic operation with PLC - 3 different blade attachment possibilities - Automatic case wing profile separation feature - Ability to automatically center and square the profile

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 6000 S PVC FULL CNC KÖŞE TEMİZLEME MAKİNESİ, • Automatically cleans the burrs formed on the inner-outer corners and upper-lower surfaces due to melting during the corner welding process of PVC profile frames, with high precision and speed • CNC control system (2 axes) • Automatic profile recognition feature • Remote installation and support • Can be connected to four-head welding machines without requiring revision • Operates with G Code • Processing capacity of 160-200 frames per 8-hour shift • Equipped with a total of 10 cleaning tools Bwsdpfx Absrbg Euo Isk • Cleaning of upper and lower surfaces for both white and colored profiles • Cleaning of upper and lower surfaces for coated profiles • Cleaning of inner and outer gasket grooves • Cleaning of both square and radius surfaces • Unlimited memory capacity and easy operation thanks to the 10" LCD HMI control panel • Long service life with automatic lubrication system (activated after every 60 frames) • Linear guide system • Unique software allows very simple operation and programming • Brushed support table system for easy rotation of profiles • Easy profile programming (handwheel) • Adjustable working speeds to desired levels

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. Bwodpfjd Hbp Aox Ab Isk - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. - Top opening gas spring assisted machine lid Bwjdpot Rrkefx Ab Iek - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. Bwjdped Hbp Esfx Ab Isk - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Year of construction: 2025, condition: new, A post-lease refurbished unit for regeneration of DPF, FAP, GPF, SCR, EURO5, EURO6, DOC and catalytic converters. The device after a comprehensive overhaul: Bwodpfxjig H H Ee Ab Iek -new hoses and seals -regenerated turbine and water pump - latest software version -manufacturer's warranty ASK ABOUT AVAILABLE MODELS AND PRICE!!!

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets Bjdpfs T D R Dsx Ab Iowk - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, functionality: fully functional, total length: 1,200 mm, total height: 2,100 mm, total width: 2,500 mm, empty load weight: 750 kg, input voltage: 400 V, water tank capacity: 400 l, warranty duration: 12 months, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS This set of devices allows for maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of the DPF DUO Premium: -> A separate dryer doubles work efficiency -> We are the only ones to offer a large-diameter hose that connects to the DPF. A larger diameter = more water = more effective cleaning -> Our filter mounting system is free of elements placed inside the DPF filter tube that could block the water flow. This allows the full performance of the water and air pump to be utilized, shortening regeneration time. -> The large cabin provides the freedom to mount the cleaned filter. The operator, based on their experience, can choose the position in which the filter will be washed. -> Protection against excessive pressure in the filter during cleaning -> Protection against lack of airflow through the filter during drying Bwsdexm Szqjpfx Ab Ijk -> Possibility to individually set the cleaning program according to the filter capacity -> Stable securing of the filter during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Training at the customer's site can be provided The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting the filter structure, restoring up to 99% of the nominal flow rate. Our technicians have dedicated significant effort to ensure that both the cleaning procedures and the detergents used are safe for the environment and machine operators. The operator checks the filter for mechanical damage using an endoscopic camera. If signs of melting, ceramic core cracks, or other apparent mechanical damage interfering with the DPF are detected, regeneration will not be possible. The regeneration process takes place in a closed chamber equipped with filters preventing harmful contaminants from escaping into the environment. Water with cleaning fluid circulates in a closed loop and is filtered throughout the process, significantly extending bath life. The DPF DUO Premium cleans filters using water, chemistry, and air. A precisely selected, computer-controlled sequence of water and detergent dosing, combined with air and impulses generated by compressed air, ensures high regeneration efficiency. After the cleaning process is complete, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be taken before cleaning, allowing subsequent comparison of backpressure values before and after the process. The device is equipped with a printer that allows generating a measurement report. The washing time for filters from passenger cars or light commercial vehicles is 20–40 minutes, which enables regeneration of up to a dozen filters in 8 hours. High efficiency combined with low operating costs guarantees a rapid return on investment.

Condition: used, More technical data on request Bodpfx Aol Iir Sjb Ijwk

Condition: used, More technical data on request Bjdpfx Abjl Iir Ij Ijwk

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, - Laser slag cleaner for laser cutting machines - 1.1 kW motor Bwjdpfx Abjx E Srce Iek - Video demonstrating working principle available

Condition: excellent (used), Year of construction: 2011, The 2-axis WP CNC-T cleaning machine is an excellent example of a device that combines a machine built on the basis of the most modern components with high efficiency and the most favorable price. This machine operates on the basis of linear motor technology (magnetic cushion), allowing for long-term operation of the device. The set of tools with which the machine is equipped allows for cleaning the most common PVC profiles on the market. The basic machine is a strong, stable frame made of structural steel. The control panel is equipped with a PC computer. Basic equipment: Working arm: The working arm is driven by a linear motor (no clutches, gears, racks, lead screws). The linear motor moves at a set distance from the magnetic strip - no friction!! Linear motors (for the "X" and "Y" axes) are numerically controlled. Air cushion the working arm weighing several dozen kilos during the movement in the "Y" axis is supported by a pneumatic actuator - it constantly supplies pressure of a fixed value, which balances the weight of the arm. This solution allows for the use of short working times without the need to expose the machine components to the risk of rapid destruction. Control panel Independent control panel with a PC computer The operator menu is described by function keys - ease of use in production conditions. from the control panel, you can easily make corrections to the outline of the profiles (it takes the operator about 1 to 2 minutes to make the correction) Other data: Automatic system for cleaning the working surface Automatic clamping and centering of the material Minimum and maximum height of the processed profile: 40 - 150 mm Minimum and maximum width of the processed profile: 40 - 130 mm Minimum size of elements: external 340x400 mm VP - transport packaging BASIC SET OF UPPER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove Bodpfxswhu Hhj Ab Iswk working unit for cleaning the surface of the glazing bead groove drilling unit for the gasket BASIC SET OF LOWER AGGREGATES: working unit for tools for cleaning flat surfaces with a groove working unit for cleaning the surface of the glazing bevel drilling unit under the seal ADDITIONAL SET OF LOWER AND UPPER AGGREGATES: working unit with a knife for cleaning flat surfaces without a groove working unit with a knife for cleaning flat surfaces without a groove

Condition: excellent (used), Year of construction: 2005, CNC corner cleaner with modern drive using linear motors Corner centering from the outside of the window Profile programming is based on a graphical interface after entering profile drawings in graphic format Tool movements with NC curves facilitate the creation and editing of programs possibility of installing up to 19 tools disc milling machine unit freely programmable operator panel with 17-inch TFT monitor and keyboard Windows operating system Positioning via linear motors profile height 45-130mm (optionally 180mm) profile width 50-130mm min. size of window opening outwards 320x320 Bwjdewh R Tkopfx Ab Ijk

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp. Bodpfowrpxtjx Ab Ijwk

Condition: excellent (used), Year of construction: 2006, Urban SV 530 + WT 530 Bwodenzh Abopfx Ab Isk The machine has undergone a professional mechanical service. Ready for work.I will send a video of the machine working on whatsapp.

Year of construction: 2023, operating hours: 50 h, condition: excellent (used), functionality: fully functional, number of tool turrets: 1, Note: This offer concerns the assignment of a leasing agreement. Pulsed cleaning laser Narran ROD 500W, equipped with an IPG Photonics source. The machine is in very good condition, with approximately 50 operating hours, used mainly for demonstrations. Technical data: - Average power: 500 W - Peak power: 2.5 MW - Wavelength: 1064–1070 nm - Frequency: 2–50 kHz - Fiber optic cable length: 10 m - Head weight: 1.5 kg - Dimensions: 1.4 x 0.6 x 1.1 m - Device weight: 195 kg - Rated power: 3.5 kW - Power supply: 220/230 V (16A) The following accessories are also included: - TBH LN 265 filter – high-performance extraction system with a compact and mobile design; - Extraction fan with hose and nozzles; - 6 pairs of special protective goggles for laser operation; Bwodjx Ezw Ujpfx Ab Iek - Interchangeable lenses for the working head; - 3M mask/face shield; - Protective partitions/separators to enclose the workspace; - Manuals in Polish and English, technical documentation (DTR) in Polish, and site-specific instructions; - Domain, website, and e-mail address. The listed price is the sum of the net principal leasing instalments, excluding additional costs, and is for informational purposes only. Offer does not include any transfer fee.

Condition: excellent (used), Year of construction: 2006, Year: 2006 - technically efficient, ready to work – after full service - 2 pneumatic motors (top + bottom) - disc cutter: 250 mm - 2 CNC axes - working height: 140 mm - profile recognition system - 2 burr removal knives (top + bottom) - infeed/Outfeed table Bodpjxz Ayyjfx Ab Iowk