Used Cleaned for sale (6,359)

Condition: good (used), Year of construction: 1996, operating hours: 9,000 h, fuel type: diesel, Case IH International 845 XL Plus 4WD Tractor 1996 Very Neat! Kledpfx Ajx Rhh Dsh Nol Video can be sent via WhatsApp. Ongoing stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, This listing is for a Microwave Laboratory Systems MLS Milestone traceClean Kljdpexzh E Uofx Ah Nel The traceCLEAN operates as a fully automated, self-contained acid steam cleaning system. Items to be cleaned are placed inside the unit, where freshly distilled acid vapors (typically nitric or hydrochloric acid) are generated and continuously refluxed within a sealed chamber. This process effectively leaches any metal contaminants from the surfaces of the items. After the cleaning cycle, the items are cooled, dried, and stored until needed

Year of construction: 2002, condition: used, This listing is for a WFI System with 2 Mueller Clean Steam Generators. The system was installed in 2002, is in working condition, and is ready for immediate use. ----- System Overview A complete Water For Injection (WFI) production, clean-steam generation, and storage system for pharmaceutical or biotech facilities. Produces ultra-high purity water and clean steam using dual Mueller steam generators, pressure columns, UV filtration, and automated control via a Pharma Tec panel. Kedpfsxv Aaiox Ah Nell ----- Main Components Mueller Clean Steam Generators ×2 – dual units producing clean / pure steam for WFI and sterilization duties. Four Pressure Columns – separation, purification, and holding of steam / condensate under controlled pressure. Fristam Pumps – sanitary main supply pumps providing feedwater or circulation through the system. Hanovia UV Filters – ultraviolet sterilizing filters to remove microbiological contamination from feedwater or WFI stream. Pharma Tec Control Panel – automation and control system with PLC, level, temperature, pressure, and conductivity monitoring; full alarm & data-logging. ----- Key Features Dual redundancy via two clean steam generators allows maintenance or alternating load without shutdown. Four pressure columns improve separation, holding and stability of steam / condensate under varying pressure loads. UV filtration ensures microbiological safety in line with regulatory requirements. Sanitary pumps (Fristam) for clean design, ease of clean-in-place, and high hygiene. Automated control panel (Pharma Tec) providing precise monitoring, control, and regulatory compliance. ----- Specifications Manufacturer: Mueller, Fristam, Hanovia / Pharma Tec Year Installed: 2002 System Type: Clean Steam + WFI generation & storage Steam Generators: 2 × Mueller Clean Steam Generators Prize Pumps: Fristam sanitary feed / supply pumps Filtration: Hanovia UV sterilisation units on feed / WFI lines Control: Pharma Tec PLC / automation panel with full instrumentation (pressure, temperature, level, conductivity) Operating Conditions: Designed for pharmaceutical WFI-grade water and clean steam (sterile / pyrogen-free)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 3141, Technical characteristics: Core Specifications Attribute Value Ultrasonic Technology High-frequency cavitation system Tank Capacity Approx. 230 liters Cleaning Stages Multi-stage (pre-wash, ultrasonic, rinse, dry) Heating System Integrated, adjustable up to 60–80°C Ultrasonic Frequency 25 kHz Construction Material Stainless steel AISI 304 or higher Control System Programmable with safety interlocks Automation Options Basket lift, agitation, filtration, oil separation Power Supply 400V / 50Hz Noise Level Approx. 70–75 dB(A) Features & Capabilities - Multi-phase cleaning: Includes vapor pre-treatment, ultrasonic washing, cold/hot rinsing, and hot-air drying. Kledpfxexx Swvs Ah Nel - Oil separation system: Utilizes skimming and decanting to maintain cleaner baths. - Modular design: Configurable with additional stations for drying, corrosion protection, or deionized rinsing. - Safety & Ergonomics: Enclosed chambers with polycarbonate windows and sensor-based safety systems. - Continuous-duty rated: Designed for high-throughput industrial applications. Machine status: WORKING

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Ksdpjt Tyqmjfx Ah Njll Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine machines for air volumes of up to 10,000 m³/h can be used. Manufactured according to the new EU standard EN 16770, they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 200 mm, Volume flow: 2,495 m³/h, Nominal volume flow: 2,262 m³/h, max. negative pressure: 2,000 Pa, Filter area: 14.5 m², Klodpfx Aju T Dv Eeh Nsl Residual dust content: < 0.1 mg/m², Number of bags: 3 pieces, Motor: 4.0 kW, Dimensions (LxWxH): 2,645 x 900 x 2,130 mm, Weight: 500 kg, Sound pressure level: 73 dB(A), Dust class: M incl.: an attached control cabinet

Condition: used, Gun cleaning device MARX PWA 900 -used- Housing parts made of stainless steel, timer, fresh spray nozzle ----- Technical data ----- Dimensions (LxWxH): 670 x 510 x 370 mm, Klodou R Tfajpfx Ah Njl Compressed air: 6 bar

Condition: new, Vacomats are mobile dust extractors that extract large quantities of dust and chips in the smallest of spaces. in the smallest of spaces. These clean air extraction systems (vacuum) for indoor installation can be installed indoors as single or multi-machine extraction systems for air volumes of up to 10,000 m³/h. can be used. Manufactured in accordance with the new EU standard EN 16770 they are particularly suitable for wood processing operations in which special safety requirements due to the risk of dust explosion. Materials of dust explosion class St1 are suitable. The Vacomaten XPe filters are cleaned purely electro/mechanical via an efficient vibration motor, which - as soon as all machines are switched off - starts starts automatically. It is controlled via the the woodworking machine by means of potential-free contacts. The control of the motorized jogging is included in the scope of delivery. Supplied without coils Motorized filter regeneration, mobile, Suction side on right or left, can be reassembled, Height reduction possible for transportation ----- Technical data ----- Extraction nozzle Ø: 180 mm, Volume flow: 2,610 m³/h, Nominal volume flow: 1,832 m³/h, max. negative pressure: 2,450 Pa, Filter area: 13.5 m², Residual dust content: < 0.1 mg/m², Number of bags: 2 pieces, Kjdpsu T Hriofx Ah Njll Motor: 3.0 kW, Dimensions (LxWxH): 2,085 x 900 x 2,130 mm, Weight: 414 kg, Sound pressure level: 76 dB(A), Dust class: M incl.: an attached control cabinet

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 Kledpfx Aju R Szyoh Nsl - new exhibition machine -

Condition: excellent (used), Objet Stratasys Model: Objet260 Connex 2 Stratasys Objet260 Connex 2 3D Printer + Cleaning Glovebox Computer, Monitor, Software: Objet Studio Ver. 9.2.11.6825 The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and allow you to combine two or three base resins in a single print run, allowing you to create prototypes from three materials, as well as simulate overmolding or populate build plates with selected models. Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces, and thin walls. Model Materials: Solid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray, and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525) Digital Materials: Digital ABS and Digital ABS2 Wide range of light transmission values Rubber compounds with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance Applications: Visual prototypes Functional prototypes Equipment and devices Architectural models Medical models Injection molds Concept models Technical specifications: Build volume: 255 × 252 × 200 mm Layer thickness: Horizontal layers of only 16 µm Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi Accuracy: 20 to 85 µm for components smaller than 50 mm; up to 200 µm for the full model size (only for solid materials, depending on geometry, design parameters, and model orientation) Size and weight: 870 × 735 × 1200 mm; 410 kg AC connection: 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase Condition: used Scope of delivery: (See image) Kedpov Rw Etofx Ah Nsll (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Vehicles (lift trucks - loading - cleaning etc) Kledpfxsx Imkrs Ah Njl Still EGV 12 - 1200 kg

Condition: new, Clean Air Filter Type: Power Unit 300 P Offer Type: New Machine Ksdpfxshfmpxj Ah Nsll Technical Specifications: Motor Power: 7.5 kW / 3-Phase / 400 V / 50 Hz Intake Port: NW 300 mm Nominal Flow Rate: 5,089 m³/h Max. Flow Rate: 6,000 m³/h Valve Pressure at Vnom: 2,434 Pa Filter Area: 30 m² Compressed Air Cleaning Incl. Integrated Pre-Separator Incl. Integrated Automatic Extinguishing System Chip Collection Volume: 3 x 250 l Sound Pressure Level: 71 dB(A) Incl. Dust Partition Dimensions L x W x H = 3,000 x 1,058 x 2,361 mm Weight: 838 kg

Year of construction: 2025, condition: new, A post-lease refurbished unit for regeneration of DPF, FAP, GPF, SCR, EURO5, EURO6, DOC and catalytic converters. The device after a comprehensive overhaul: -new hoses and seals -regenerated turbine and water pump - latest software version -manufacturer's warranty Kledjig H H Eopfx Ah Nol ASK ABOUT AVAILABLE MODELS AND PRICE!!!

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, mast type: simplex, Sweeper suction machine Mast type: Standard Technical condition: good Kodpfx Ajukrcpoh Njll Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear tire: 1 x bandage tire; Power steering; Front windshield; 2 x work lights / StVZO-like; Overall height: 2300 mm

Condition: used, Year of construction: 2014, operating hours: 8,498 h, functionality: fully functional, mast type: simplex, Sweeper-scrubber Mast type: Standard Technical condition: normal Transmission: Hydrostatic; Tires: 2 x drive wheels bandage power steering Overall height: 2300 mm Kedpeukrcijfx Ah Nsll

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled Klsdpfxs T D R De Ah Nsl - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Year of construction: 2019, condition: new, Tub cleaning systems with lifting devices are already used in the largest plants, where the quality of powder coating requires several washing zones. What is impossible or expensive for manual powder coating. The tank systems can also be combined with ultrasonic tanks. The basic system consists of a minimum of 2 tanks, one with the usual preheated chemical agent and the second for rinsing. Klsdpfx Ahocxfrke Nsl

Condition: used, engine: 1,3 kW mass: 37 kg working width: approx. 40 cm Kledot N Akbspfx Ah Nel The Nilco BA33-33E cleaning machine is a compact, powerful scrubber dryer for the thorough cleaning of hard floors.

Year of construction: 2025, condition: new, length 1500mm working width 560mm capacity up to 2000 kg/h basic version: gumming of inlet and outlet chassis frame with bogie and steering wheels Kedecx R D Hepfx Ah Nsll vertical adjustment frame (inlet height 1000-1200 mm / outlet height 630-830 mm) curled brush stainless steel construction spray-unit for fresh water Water consumption: 5l/min bei 5bar Power: 1,1kW Dimensions (LxWxH): 1550x1000x1750mm Weigt: approx. 120kg

Condition: good (used), Year of construction: 2003, Parts cleaning device, IBS, – used - : Price per unit: €350 (net) Manufacturer: IBS Scherer GmbH Model: Type F2 Year of manufacture: 2003 Serial number: 44675 Power connection: 1/N/PE 230V, 50Hz Rated power consumption: 18W, 0.2A Klsdpfxox El A Us Ah Nol Load capacity: 60 kg Width: 800 mm Net weight: 50 kg Drum size: 50-litre drum Frame material: sheet steel Height: 1125 mm Cleaning medium: special cleaner Cleaning tank width: 790 mm Cleaning tank depth: 540 mm Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 1998, condition: used, functionality: unexamined, machine/vehicle number: 970323, MTM Flood Chamber Cleaning System 2-tank (washing and rinsing) unit including bath treatment via distillation unit Batch size (incl. basket): 530x320x200h mm; Batch weight: max. 40 kg Alkali tank: approx. 330L Rinse tank: approx. 330L Destimat (distiller): approx. 140L Kledex Ncm Espfx Ah Nsl System dimensions: 3,290 x 2,503 (with extension table) x 2,700(h) mm Total connected load: 35 kVA, main fuse: 80A A chiller is additionally included The system is sold in untested condition without warranty or guarantee. Operating manual available.

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Kljdpfex D Uqijx Ah Nsl Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system - Badger Magnetics 8 kVA transformer (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Year of construction: 2011, condition: ready for operation (used), A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible. Kjdpfjx I Rrgsx Ah Nsll

Condition: good (used), Year of construction: 2015, functionality: fully functional, Available immediately! Function Klodpfxjx Izwmo Ah Njl Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray amount: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, IFP - KP50HYBRID Metal Degreasing and Cleaning System HYBRID Technology: Solvent-based and aqueous component cleaning in a single system. Demonstration unit, year of manufacture: 2024 Condition: As new Technical specifications: • Usable solvents/cleaners: modified alcohol (Alll) + water with detergent • Basket dimensions (L x W x H): 480 x 320 x 200 mm • Maximum basket weight: 50 kg • Throughput: 3 - 8 batches/hour • Connected load: 30 kW • Energy consumption: 15 kWh Kledpfox Ivtpsx Ah Nel • Compressed air: 6 bar • System dimensions (L x W x H): 3000 x 2000 x 3000 mm • System weight: 4,100 kg • System cooling: Air/water-cooled (customer-side chilled water supply required) System features: • Fully enclosed system design • Service doors • Rotating and swiveling device • Front loading with safety glass door • 2 buffer tanks for solvent • 2 buffer tanks for water • Ultrasonic cleaning equipment • Process filtration • Fine filtration • Intensive vacuum drying • 12'' touch panel • Sliding table with two basket stations • Preservation unit • Online access for remote maintenance