Used Citycat 5000 for sale (2,215)

Condition: used, Year of construction: 2021, operating hours: 2,774 h, mileage: 13,117 km, overall weight: 4,800 kg, fuel type: electric, operation weight: 4,800 kg, maximum load weight: 1 kg, empty load weight: 3,100 kg, tire size: 215/75 R16, total length: 5,280 mm, tire condition: 85 %, front tire size: 215/75 R16 | 85%, rear tire size: 215/75 R16 | 85%, maximum speed: 50 km/h, Tires (front): 215/75 R16, Tires (rear): 215/75 R16, Operating hours: 2774, Battery: Li-ion 63 kWh, Width: 1300, First registered: November 2, 2021, Charger: Integrated 22 kW, self-propelled_____Basic equipment of the fully electric CityCat V20e: Cab: Comfortable, suspended, soundproofed aluminum cab. Windshield made of heat-insulating, curved, low-reflection safety glass. Two sliding windows in each door. Multi-stage heater fan, sun visors, windshield wiper with washer. Individually adjustable, suspended driver's seat with headrest and 3-point safety belt. Angle- and height-adjustable steering column. Chassis: Two-part ladder frame chassis with "C" profile construction. Independent wheel suspension via shock absorbers and coil springs on the front axle and leaf spring suspension with shock absorbers on the rear axle. Axles and steering: Electrically driven front axle with self-locking differential (Torsen differential). Articulated steering with load-sensing steering hydraulics. Working hydraulics: Electrically driven hydraulic unit with low-noise gear pumps for steering, auxiliary functions, and front and side brush drive. Brakes: Hydraulic servo dual-circuit braking system with disc brakes on the front and rear axles. Parking brake (spring-loaded brake) acting on the front axle. Drive system: Working speed 0-15 km/h Travel speed 0-50 km/h* Gradeability up to 30% Electric drive output 88 kW Electric fan 8.5 kW Electro-hydraulic unit 12 kW HV battery: Battery type Li-ion Battery capacity 63 kWh Nominal voltage 335 volts Operating time up to 10 hours Charging system: Integrated charger 22 kW Type 2 charging plug Charging time 2 to 3 hours Steering: Hydrostatic articulated steering (right-hand drive), with load-sensing control Hydraulics: Hydraulic unit with low-noise gear pumps for fan, steering, auxiliary functions, and front and side brush drive On-board voltage: 12 V electrics, 95 Ah battery Hydraulic servo dual-circuit braking system with disc brakes on the front axle and disc brakes on the rear axle, spring-loaded brake (parking brake) and handbrake valve acting on the front axle. Tires: 4 wheels with 215/75 R16C M+S. Dimensions: Length 4200 mm Width 1300 mm Height 1999 mm Wheelbase 1900 mm Track width 1090 mm Sweeping width 2100 mm Sweeping width with 3rd brush 2700 mm Special equipment: - Lithium-Ion NMC battery, 63kWh, 335V - RAL 9016 white - Suction hose, 4m long (incl. suction pipe), diameter 120mm, with Storz couplings, with hydraulic closing flap - Third front disc brush - Brush diameter. 800mm, with front arm, swivels left and right with hydraulic tilt adjustment - Hydraulic tilt adjustment of both side brushes - Side adjustment of both side brushes, stepless hydraulic adjustment of both brushes individually - Easy clean quick cleaning system for cleaning the KGB side walls, recuperation and leaf grille - Hydraulic side brush pressure regulation of both side brushes with side brush individual lifting, combined - Radio DAB+ with CD MP3, Bluetooth, microphone - Heated exterior mirrors - Broom sp Csdpfx Aboiwwghebjgn

Condition: used, Year of construction: 2017, operating hours: 900 h, functionality: fully functional, machine/vehicle number: 2575, Model/Type: RUF 18.5/5000/80 Machine No.: 2575 Year of Construction: 2017 Drive Motor: 18.5 kW Throughput Capacity up to max.: 550 kg/h (depending on material) Pressing Pressure: approx. 5000 kg/cm² Briquette Format: 80 mm Running Hours: approx. 900 h Warranty: 12 months after delivery Availability: approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 Cgodpfxet Sfxms Abbjn + 600 x 1,000 mm hopper + Electrical emulsion pump + Spraying device + Extractable screw + Speed-controlled pump

Condition: used, Year of construction: 2011, functionality: fully functional, Duplo 5000pro Booklet maker, fully loaded with: DBM-500 Serial: 110100011 DBM-500T Serial: 110100042 DC-10/60 Pro Serial: 101100045 SCC Serial: DSF-2000 Serial:110900859 LDR Serial LUL-HM Serial: 101100070 Machine count: 2862517 Top Spec configuration, Can use digital feeder and run collator for litho. Pervious customer brought from new! Paid over £80K In Very nice condition and full working order. Equipment has been on a Duplo maintenance contract. Comes with all manuals, and available accessories. Installed with Hohnor Stitching heads. Video in production on request. Collection from my warehouse in Tadley Near Reading. Machines can be put on pallets for shipping if requested. Buyer to arrange collection/Shipping. Max Production Speed (Booklets) Up to 5,000 books per hour (A5 size) Max Collating Speed (Sets) Up to 9,000 sets per hour (A4 LEF) Max Number of Bins Up to 60 (with six DC-10/60 Pro towers) Stitch Positions Saddle, corner, side, fold only Programmable Memory 12 job memory positions Control Interface LCD touch panel Duplo DC-10/60 Pro Collator Number of Bins: 10 per tower. Bin Capacity: 65 mm. Paper Size (Min/Max): 120 x 148 mm to 356 x 508 mm. Paper Weight: 52 to 300 gsm. Feeding System: Suction feeding with Air Management System (AMS). Error Detection: Double feed, skipped sheet, missing paper, paper jam. Duplo DBM-500 Pro Booklet Maker Cjdpfjx H Ai Ijx Abbsgn Max Sheets (Booklet Making): Up to 25 sheets (80 gsm). Stitching Capacity (Side/Corner): Up to 30 sheets (80 gsm). Paper Size (Min/Max): 120 x 170 mm to 356 x 508 mm. Staple Thickness: Up to 5 mm. Duplo DBM-500T Pro Face Trimmer Trim Margin: 1 to 25 mm. Untrimmed Book Size (Min/Max): 85 x 120 mm to 254 x 356 mm. Trimmed Book Size (Min/Max): 75 x 120 mm to 253 x 356 mm.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 18,000 rpm, rotational speed (max.): 18,000 rpm, overall weight: 11,000 kg, spindle speed (min.): 18,000 rpm, Equipment: chip conveyor, Machine designation: Machining Centre Manufacturer: Mazak Model: HCN 5000-II Year: 2008 Technical details: X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Controller manufacturer: Mazatrol Controller model: Matrix Nexus Max. workpiece weight: 700 kg Overall height: 2,813 mm Overall length: 5,985 mm Overall width: 3,056 mm Table width: 500 mm Table length: 500 mm Total weight: 11,000 kg Max. spindle speed: 18,000 rpm Csdpfx Asyargbsbbjgn Mazak HC Nexus 5000-II CNC horizontal machining centre Mazatrol Matrix CNC control Pallet table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg X-Y-Z axes travel: 730 x 730 x 740 mm Table indexing: 0.001° Spindle taper: DIN 69871A-40 Spindle speed: 18,000 rpm Spindle motor: 35-26 kW Tool magazine capacity: 80 For any questions regarding the machine or to arrange a viewing appointment, please contact us by phone or email.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 5,214 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller model: SINUMERIK 840 D sl/operate, spindle speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 730 mm Travel Y-axis: 730 mm Travel Z-axis: 880 mm Max. main spindle speed: 20,000 rpm Max. torque: 250/104 Nm Cedpfx Aoyapvasbbegn Tool holder: HSK-A63 Distance spindle center to table: 80 - 810 mm Distance spindle nose to table center: 70 - 950 mm Number of pallets: 2 Pallet size: 500 mm x 500 mm Max. workpiece weight: 500 kg Pallet change time: 9.0 s Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Number of tool stations: 40 Tool change time (tool to tool): 2.5 s Tool change time (chip to chip): 4.4 - 10.0 s Max. tool diameter: 70 mm Max. tool length: 550 mm Max. tool weight: 12 kg Rapid traverse speed: 60,000 mm/min MACHINE DETAILS Control: SINUMERIK 840 D sl/operate High-pressure coolant: 70 bar Dimensions & Weight Floor space required: 6,000 mm x 4,000 mm x 2,700 mm Machine weight: 12.0 t Operating hours: 5,214 h EQUIPMENT Pallet changer Coolant tank Tool breakage monitoring

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 11,000 h, controller model: Sinumerik 840D, laser power: 2,700 W, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, working length: 6,500 mm, TruLaser Tube 5000 with Special Equipment: Laser TruFlow 2700 & SeamLine Tube! TECHNICAL DETAILS Laser Power: 2,700 W Maximum Sheet Thickness (Steel): 6 mm Maximum Sheet Thickness (Aluminum): 4 mm Working Area: 6,500 mm MACHINE DETAILS Laser Type: TruFlow 2700 Control System: Sinumerik 840D Laser Operating Hours: 11,000 h EQUIPMENT Cgsdpfxsyanr To Abbon - Documentation / Manual - Safety light curtain - Sturdy machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency excited, with cooling unit - Maintenance-free three-phase servo motors - NitroLine high-pressure cutting - SprintLine for rapid processing - Programmable cutting gas pressure control - Laser cutting head with 5 lenses - Quick-change device for the cutting head - Laser power control - Laser logbook function - Automatic shutdown - Workspace illumination - Multi-beam light curtains - Fully enclosed and ventilated beam guidance - Compact dust extractor - Protective enclosure - PRS 3001 discharge station with brush table - Set of clamping jaws D 20–85 mm and D 85–150 mm - 1 set of V-shaped form shells and guide rollers for round tubes - 1 set of U-shaped form shells and guide rollers for a circumscribed diameter of 120 mm - SeamLine Tube

Condition: good (used), Year of construction: 2014, x-travel 730 mm y-travel 730 mm z-travel 880 mm size of pallet 2 x: 500 x 500 mm spindle speed: 12000 tool taper SK 40 distance spindle center to table 80 - 810 mm milling spindle drive 30 kW max. torque max. 102 Nm max. workpiece weight 500 kg max. workpiece diameter on pallets 800 mm max. workpiece height H = 1100 mm change time of pallets 9,5 sec Max. speed ot the feeder 60000 mm/min rapid traverse 60 m/min tool changer number of tools 40 max. tool diameter 110 mm max. tool-dia with free toolbox 320 mm max. tool weight 30 kg change-time chip to chip 4,4 - 10 sec change-time tool to tool 1,95 sec Number of working hours 15894 h total power requirement 46 KVA weight of the machine ca. 15 t required space 5,5 x 3 x 2,8 m Cgedpfx Aov Htitsbbon Well-preserved horizontal machining center DMG-Mori, Mod. NHX 5000, built in 2014 with Siemens 840D CNC control with two pallets and 40-way tool changer. Read operating hours 23262, spindle hours 15894 Other data: Distance spindle nose - table center 70 - 950 mm Pallet indexing time 1.3 sec Indexing of the B axis (table) 360 x 1 degree Jog feed rate 0 - 5000 mm/min Machine dealer with own stock of 1600 m².

Condition: used, cooking length 4.000 mm belt width 600 mm all stainless steel with electrical hoist steam heated (steam generator not included) temperature distribution in 2 zones dimensions (l x w x h) : ± 5.000 x 1.550 x 2.200 mm Cjdex Sxvhopfx Abbogn adjustable speed

Condition: used, Year of construction: 2013, The Duplo Bookletmaker System 5000/4000 is a sophisticated and highly efficient finishing solution, designed to streamline booklet production with precision and reliability. Manufactured in 2013 and currently operational in a German printshop, this system is built to handle sheets up to 350 x 500 mm, making it ideal for a wide range of booklet and brochure formats. The system is comprised of two Collorator towers, each featuring 10 compartments (DBM 4000), ensuring smooth and organized sheet collation. It also includes a delivery/offset stacker (DBM 4000) for neat output stacking, and a stitching and folding unit (DBM 5000) for professional booklet assembly. A dedicated pressing plant (DBM 5000) guarantees crisp, flat results, while the integrated trimmer (DBM 5000)???equipped with new blades and updated controls???delivers clean, precise cuts every time. Enhancing operational flexibility, the system features an adjustable kicker/display for customizable interval settings. The DBM 4000 components were built in 2007, while the DBM 5000 units were added in 2013. With each tower boasting 4 million cycles and the trimmer at 2.5 million, this system has proven its durability and performance. Regular maintenance by FKS Hamburg ensures the machine remains in top working condition, ready to meet the demands of high-volume production environments. Format: 350 x 500 mm Equipment: 2 Collorator towers with 10 compartments DBM 4000 1 piece delivery/offset delivery Stacker DBM 4000 1 piece stitching and folding unit DBM 5000 Duplo 1 piece pressing plant DBM 5000 Duplo 1 x Trimmer DBM 5000 Duplo (New blades/new control) 1 piece Kicker/display adjustable the interwalle D System DBM 4000 built in 2007, System 5000 built i Towers 4 million each, trimmers 2.5 million Cjdpsxphybsfx Abbsgn Maintenance by FKS Hamburg

Condition: excellent (used), Year of construction: 2012, Ref:11053 . 2012 Duplo 5000 System Quick make-ready vertical sheet collator for any digital print operation. With in-line booklet maker. Comprising: DC60/10 PRO – 2 x 10 bin tower collators with touch screen for auto make-ready. Suction feeding system with mis & double sheet detection. Rear jogger tray delivery unit. Booklet maker comprising:- Cjdjx Sq Tlepfx Abbsgn DBM 500 twin head wire stitching unit, programmable 2 x Hohner 48/5 S stitching heads Single fold unit DBM 500T Single knife foredge trim unit Shingle belt delivery unit.

Condition: used, total height: 2,400 mm, total width: 650 mm, total length: 2,350 mm, - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 3 - Filter length [mm]: 1250 - Filter diameter [mm]: 500 Cedpfx Aboxrtk Debjgn - Filter surface area [m²]: 1 - Connection diameter [mm]: 220 - Main fan [pcs]: 1 - Voltage [V]: 400 - Power [kW]: 3.7 - Transport dimensions: 2350mm x 650mm x 2400mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Year of construction: 2021, functionality: fully functional, saw blade diameter: 500 mm, The saw is still in operation and can be tested at any time by arrangement. Data available on the nameplate. Cedpfoyaangox Abbogn

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 760 mm, area performance: 4,000 m²/h, warranty duration: 24 months, tank capacity: 120 l, total height: 1,258 mm, total width: 834 mm, total length: 1,458 mm, water tank capacity: 130 l, operating speed: 8 mm/s, We offer for sale a new Ride-On Scrubber Dryer IXSA X9 with seat Device warranty – 24 months Battery warranty – 60 months Cjdpoyaaflofx Abbogn Technical Data: • Working width: 760 mm • Machine performance: 4000 m²/h • Brush diameter (quantity): 380 mm (2) • Squeegee width: 1020 mm • Recovery tank capacity: 130 l • Solution tank capacity: 120 l • Rated power: 2100 W • Maximum gradient: 10% • Vacuum motor power: 24 V / 550 W • Brush motor power: 24 V / 2 x 550 W • Maximum speed: 8 km/h • Brush pressure: 3.5 MPa • Brush speed: 180 rpm • Pad width: 13" • Vacuum: 188 mbar • Noise level (EN 60704): 65 dB(A) • Machine dimensions (L/W/H): 1458 x 834 x 1258 mm • Machine weight (without battery): 248 kg • Lifepo4 Batteries: 25.6V 200Ah – operating time approx. 5 h • Lifepo4 Batteries: 25.6V 300Ah – operating time approx. 7 h • Possibility of opportunity charging Standard equipment for the scrubber dryers offered includes: • Neodymium disc brushes – magnet-mounted • Pad holder • LifePro extended-cycle batteries for longer run time compared to standard gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – minimal electronics ensure extended trouble-free operation ✅ 5-year warranty on lithium-ion batteries – an industry-leading guarantee of durability and reliability ✅ Greater number of charge cycles compared to gel batteries (700 vs. 5000 cycles) and longer operating life – IXSA batteries offer greater efficiency and reduced long-term replacement costs ✅ Magnet-mounted brushes – easy installation and removal ✅ Long battery runtime with short charging time ✅ Highest quality American LINATEX squeegee blades ✅ Double vacuum system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – modern technology for better results and extended brush life ✅ High surface area performance – saves time and labour costs ✅ Robust construction and low operating costs – ideal for intensive, professional use ✅ Ergonomic and intuitive operation – user comfort and easy handling

Condition: new, Year of construction: 2026, functionality: fully functional, working width: 650 mm, area performance: 3,300 m²/h, warranty duration: 24 months, tank capacity: 85 l, total height: 1,170 mm, total width: 660 mm, total length: 1,300 mm, water tank capacity: 95 l, empty load weight: 229 kg, We offer for sale a brand new IXSA X8 Ride-On Scrubber Dryer. Device warranty: 24 months Battery warranty: 60 months Technical Specifications: • Working width: 650 mm • Productivity: 3,300 m²/h • Brush diameter (quantity): 330 mm (2) • Squeegee width: 1,020 mm • Recovery tank: 95 l • Solution tank: 85 l Cgjdpfx Abex U T E Nebon • Rated power: 1,350 W • Maximum slope: 10% • Vacuum motor power: 24V / 500W • Brush motor power: 24V / 2x300 W • Maximum speed: 8 km/h • Brush pressure: 2.8 MPa • Brush speed: 180 rpm • Pad diameter: 13'' • Vacuum: 188 mbar • Noise level (EN 60704): 63 dB(A) • Dimensions (L x W x H): 1,300 x 660 x 1,170 mm • Weight (without battery): 229 kg • Lifepo4 batteries: 24V 200Ah. Working time: approx. 7 h • Batteries can be opportunity-charged Standard equipment for the scrubber dryers offered includes: • Neodymium disc brushes – magnetically mounted • Pad holder • LifePro batteries with extended cycle life and longer runtime compared to standard gel batteries • Charger • Squeegee blades made from Linatex material Why choose IXSA? ✅ Durability – minimal electronic components for increased reliability and long service life ✅ 5-year lithium-ion battery warranty – exceptional in the industry, confirming top durability and reliability ✅ Significantly higher charge cycle count vs. gel batteries (700 vs. 5,000 cycles) and longer runtime – IXSA batteries offer more efficient operation and lower replacement costs in the long term ✅ Magnet-mounted brushes – quick and easy installation/removal ✅ Long battery runtime with short charging times ✅ Premium quality American LINATEX squeegee blades ✅ Dual suction system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – state-of-the-art technology for better cleaning performance and longer service life ✅ High surface efficiency – saving time and reducing operating costs ✅ Robust construction, low operating costs – built for intensive, professional use ✅ Ergonomic, intuitive operation – user-friendly design and controls

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 530 mm, area performance: 3,000 m²/h, warranty duration: 24 months, tank capacity: 60 l, total height: 1,090 mm, total width: 550 mm, total length: 1,270 mm, water tank capacity: 65 l, empty load weight: 154 kg, We offer for sale a New Scrubber-Dryer with traction – IXSA Model X7T Device warranty – 24 months Battery warranty – 60 months Technical specifications: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 × W550 × H1090 mm • Solution / recovery tank capacity: 60/65 L • Vacuum motor: 370 W • Brush motor: 500 W • Cleaning capacity: 3000 m²/h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time – approx. 4h (2h to 80%) • Battery operating time – approx. 4h • Battery lifespan – 5000 cycles • Option for opportunity charging Standard equipment included with the listed scrubber-dryer: • Neodymium disc brushes – magnetic mounting • Pad holder • LifePro batteries offering extended cycle life and longer runtime compared to standard Gel batteries • Charger • Linatex squeegee blades Why choose IXSA? ✅ Durability – minimal electronics used in the device ensures extended reliability and reduced risk of failure Cgedpfx Absx U Ty Hsbsn ✅ 5-year warranty on lithium-ion batteries – unmatched in the industry, confirming highest durability and reliability ✅ Greater number of charge cycles compared to gel batteries (700 vs. 5000 cycles) and longer operating time – IXSA batteries allow for more efficient use and lower long-term replacement costs ✅ Magnetically mounted brush – easy installation and removal ✅ Long operating time with short charging cycles ✅ Highest quality American LINATEX squeegee blades ✅ Dual vacuum system – perfectly dry floors immediately after cleaning ✅ Neodymium brushes – advanced technology for superior cleaning results and longer lifespan ✅ High surface productivity – saves time and reduces operational costs ✅ Robust construction, low maintenance costs – equipment designed for intensive, professional use ✅ Ergonomic and intuitive operation – user comfort and straightforward controls

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 530 mm, area performance: 2,500 m²/h, warranty duration: 24 months, tank capacity: 52 l, total height: 1,090 mm, total width: 550 mm, total length: 1,270 mm, water tank capacity: 48 l, empty load weight: 154 kg, We offer for sale a New IXSA X6 Scrubber-Dryer. Warranty on the machine – 24 months Warranty on batteries – 60 months Technical data: • Scrubbing width: 530 mm (20 inches) • Squeegee width: 790 mm • Dimensions: L1270 x W550 x H1090 mm • Solution / recovery tank capacity: 48 / 52 L • Vacuum motor: 370 W • Brush motor: 500 W • Productivity: 2,500 m²/h • Net weight: 154 kg • Working speed: 0–5 km/h • Semi-automatic drive • Battery charging time – approx. 4 h (80% charge in 2 h) • Battery runtime – approx. 4 h • Battery life – 5,000 cycles • Battery can be recharged at any cycle Standard equipment included with the scrubber-dryer: • Neodymium disc brushes – magnet-mounted • Pad holder • LifePro batteries featuring increased cycle count and longer runtime compared to standard Gel batteries • Charger • Squeegee blades made of Linatex material Why choose IXSA? ✅ Durability – minimal electronic components for extended trouble-free operation ✅ 5-year warranty on lithium-ion batteries – unique in the industry, confirming highest durability and reliability ✅ Significantly higher charging cycles compared to gel batteries (5,000 vs. 700 cycles) and longer operating times – IXSA batteries provide more efficient use and lower long-term replacement costs ✅ Magnetic brush mounting – easy to install and remove Cgedpfx Aex U Tvusbbjn ✅ Long battery runtime with short charging times ✅ Top-quality American LINATEX squeegee blades ✅ Dual suction system – leaves floors perfectly dry immediately after cleaning ✅ Neodymium brushes – modern technology for superior cleaning results and longer lifetime ✅ High productivity – save time and reduce operating costs ✅ Sturdy construction, low operating costs – suitable for intensive, professional applications ✅ Ergonomic and intuitive operation – user comfort with simple controls

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Middle frquency welding unit consist of: 1 pce. Welding controller BIHLER B 5000 Codpfxjx I R Hqe Abbsgn 1 pcs. Welding transformer 130 kVA Welding capacity: 130 kVA Power voltage: 400 V, 50 Hz.

Condition: used, Year of construction: 2024, operating hours: 1,004 h, power: 118 kW (160.44 HP), color: orange, empty load weight: 10,500 kg, Operating hours: 1004, First registration: 18.06.2024 Basic equipment: Steering: Hydrostatic four-wheel steering with hydraulic power assistance Axles: Rear axle as a driven steering axle with differential; Front axle as a non-driven axle with coil springs and shock absorbers Hydraulics: The latest electronic control concept enables consumption- and noise-optimized control of the diesel engine for a hydrostatic drive across the entire speed range without power loss. Diesel consumption and emissions are significantly reduced thanks to the electronic control system and the Euro 6d diesel engine. Valuable resources and the entire vehicle system are preserved. Comparative tests have shown diesel savings of 30% and a noise reduction of 20% during relocation operations. These positive effects also translate into lower operating costs. Brakes: Hydraulic dual-circuit braking system with hydraulic power assistance. Disc brakes front and rear. Hydraulic spring-loaded parking brake on the rear axle. Four brake calipers at the front and two at the rear. Csdpfx Absw Hlvkebogn Cabin: Comfortable, sound-insulated cab, suspended on hydraulic mounts. Windscreen of heat-insulated, curved, low-reflection safety glass. Two sliding windows in every door. Multi-stage heater fan. Sun visor. Windshield wiper with washer. Air-suspended driver’s seat and spring-suspended passenger seat, both individually adjustable. Steering column adjustable in angle and height. Clearly laid out and ergonomically arranged control and monitoring instruments with a 7'' color display. Visual and audible warning system for temperature and fluid level monitoring. Visual diagnostic system with intuitive design. Sweeping debris intake: Suction intake principle, with trailing, stainless-steel suction mouth in front of axle; together with side brooms, laterally hydraulically adjustable up to 400 mm. Continuously variable high-performance suction fan. Debris container: Hydraulically tiltable and closable container with a volume of 5.6 m³. Tipping height 930 mm. High-tip height 1550 mm. Dump width 1700 mm. Dump angle 51°. Water system: Water tank approx. 880 liters. One water pump for nozzles. Brooms: Two sweeping brooms left and right, Ø 900 mm, speed continuously adjustable from 0-150 rpm, collision protection. Three front brooms for sweeping width up to max. 3768 mm and for sweeping corners and ramps, usable on left, right and second level. Special equipment: - RAL 2011 orange - Hydraulic suction pipe flap for closing the feed pipe - Leaf grid lifting device for raising and lowering the leaf grid in the debris container via hydraulic hand pump - Easyclean quick cleaning system for cleaning the container side walls, fan, recuperation, and leaf grid - 1 wild weed broom incl. special separating apron / 2x without broom bristles supplied loose - 3rd front broom in reinforced version (SL only) Front broom in reinforced design (standard bristles), with linear adjustment, tilt adjustment in both directions, downforce regulation, greater reach, larger sweeping area - Leaf suction hose mounted on the side – length 3.5 m, Ø 160 mm; can be mounted on both sides - Fully integrated, CFC-free air conditioning system

Condition: used, Year of construction: 1990, cutting diameter 500 mm cutting length 5000 mm saw blade diameter 420 - 500 mm dimensions ca.6400 x 1500 x 1600 mm weight ca. 1600 kg Cedpfxev U Dlue Abbjgn feed stufenlos Motorized length adjustment with digital display manual and spare part list included

Condition: used, Year of construction: 1987, Manufacture : Goavec SA Year : 1987 Previous application: Cream tank (fluid/thick) Volume : 5000 Litres Material : 304 stainless steel (Thickness : 25/10) Jacket + insulation Pressure inside tank: + 0.1 bar Jacket pressure: 3.5 bar (water) / 2 bar (steam) Cedpfxex R Dkbo Abbegn Agitation : 1.8 KW - 41 rpm 1 fixed paddle: counter-stirring Wash balls: 2 units Inspection hatch: manhole Removable guardrail Drawing available (digital version)    

Condition: like new (used), 24000 kg length 5000 mm width 2500 mm loading area height 700 mm Cjdsxcuyuspfx Abbsgn

Condition: good (used), Year of construction: 2003, Control unit, control element, interface, contactor -Manufacturer: Jungheinrich, Contactor control unit from order picking forklift type: ECE 20 -Type: 5000 7894 -Voltage: 24 V -Dimensions: 150/100/H100 mm -Weight: 1.4 kg Cedpfx Aeiy R Uasbbsgn

Condition: good (used), Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 53.5/64.9 kW -Fan: Ziehl-Abegg -Operating pressure: max 16 bar Quantity: 1 piece available Csdpfx Abeu N Sibebsgn -Dimensions: 800/390/H880 mm -Weight: 49 kg

Condition: used, Year of construction: 2023, Movable lifting frame, manual trolley, rolling trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Lifting capacity: approx. 5,000 kg -Condition: unused, without control -Year of construction: approx. 2023 -Track gauge chassis: 4025 mm -Distance between lifting arms: 3590 mm -Lifting arm projection: approx. 800 mm -vertical travel: approx. 1330 mm -Lifting drive: by gear/rack -Drive chassis: 2x SEW gear motor KA67 DRN80MK4/BE1/TF -Speed: 16 rpm -Power: 0.55 kW -Hollow shaft diameter: Ø 40 mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Wheels for rail system: made of steel, 90 mm wide, with adjustable guide -Drive hoist: 1x SEW gear motor KA87 DRN100L4/BE5/TF -Speed: 13 rpm -Power: 3 kW -Hollow shaft diameter: Ø mm -Design: Hollow shaft angle Cjdpfx Aboucaimjbogn -Protection class: IP 54 -Brake -Overall dimensions: 4725 / 2000 / H2420 mm -Total weight: 2000 kg

Condition: good (used), Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 5 t -Rope groove: Ø up to 22 mm / see photos Csdpew Tincjfx Abbjgn -Dimensions: 630/297/130 mm -Own weight: 32.6 kg