Used International 5100 for sale (9,930)

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools Prjdpfx Adeif Ek Rjnsd • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), load capacity: 6,000 kg, table load: 6,000 kg, Welding turntable with 6 ton load capacity Speed steplessly adjustable from approx. 0.01 to 1.1 rpm Diameter 2.15 m New electrics With hand and foot remote control Prodpfx Aowz Rfyjdnjd

Condition: excellent (used), IM Very good condition. Psdpfx Adjw Ebwuonord

Condition: new, New device MASS International Angle Conveyor Belt NDS L Conveyor belt/assembly line Available at short notice Angle conveyor belt with adjustable angles Incl. paddle separator and side catch plates at the feed section Example as shown: Feed section: 600 mm Upright section: 1300 mm Discharge section: 800 mm Usable width: 350 mm Outer width: 405 mm (without motor) Height-adjustable, discharge height 700 - 1000 mm Adjustable angles for feed and discharge sections Adjustable inclination Preder A D S Espfx Adnsd PU belt, super grip Belt speed: 3 m/min Mobile on swivel lockable castors Side catch plates at the feed section Paddle separator is individually controllable and height-adjustable

Year of construction: 1985, condition: good (used), Met International Used Hydraulic press Podsn Awfyopfx Adnerd Forming press 40ton Bed size 600mm X 600mm Four poster hydraulic press. H frame / C frame also available. Many other used presses for sale with cushion, different daylight and stroke. New hydraulic power presses available built to your specification. Cheap hydraulic presses. Large and small bed sizes available. Delivery and installation can be arranged.

Condition: excellent (used), functionality: fully functional, Evaporative Condenser Baltimore Aircoil International VXC-250 Manufacturer: Baltimore Aircoil International Model: VXC-250 Serial Number: H160220703 Dimensions: 3600 × 3530 × 5000 mm Pjdpfxjxpxiae Adnjrd The BAC VXC-250 evaporative condenser is a high-performance unit designed for industrial cooling and HVAC systems. It operates based on the principle of evaporative cooling, which provides low energy consumption and efficient heat dissipation even under heavy loads. Robust construction and optimized fan efficiency ensure reliable operation and long service life. The VXC-250 model is adapted for operation in demanding industrial environments, offering high performance in a compact size.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes Prjdpsfnlkwofx Adnjd • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), functionality: fully functional, operation weight: 4,700 kg, Year of construction: 2018, Description Hoeflon C10 compact crane This compact crane is ideal for work in hard-to-reach places. The Hoeflon C10 is renowned for its maneuverability and power. Contact us for more information and a viewing. Technical specifications: Hour meter readings: - contact: 616 - diesel engine: 150 - electric motor: 102 Predpfx Aoxnxq Isdnsd Year of manufacture: 2018 Color: Hoeflon original The crane will be delivered with maintenance service and inspection by Hoeflon Nederland.

Condition: ready for operation (used), Apple International mobile depositor, model: WD, serial number: 1601710, year of construction: 2016, 240 Vac, 1 Ph, 16 A, 8 heads, inside dimensions: Ø 500 mm x 405 mm, total dimensions: 1900 mm x 850 mm x 1550 mm. Prodpfou D Hxaex Adned

Condition: new, New device MASS International Z-conveyor NDZ Angled conveyor / conveyor belt Available at short notice Example as shown: Height-adjustable angled conveyor belt with adjustable angles Infeed section 600 mm Incline section 1300 mm Discharge section 500 mm Usable width 250 mm External width 305 mm (without motor) Height-adjustable discharge height 700 - 1000 mm Adjustable angles for infeed and discharge sections Adjustable incline PU belt Color: black L cleats Cleat spacing 500 mm Cleat height 30 mm Pedeiz S Htepfx Adnsrd Belt speed 3 m/min Standard control with emergency stop / stop button Mobile on steerable locking rollers Three-piece hopper trays for infeed section

Year of construction: 2018, condition: ready for operation (used), Various machines for sole assembly, heating, activation, pressing, and cooling of soles for the shoe manufacturing industry are available. 1) Cooling tunnel Elettrotecnica 491 PS, year of manufacture: 2017, temperature range: 0°C-10°C, belt width: 400mm, machine dimensions X/Y/Z: approx. 1150mm/800mm/1600mm, weight: approx. 250kg. 2) 3x sole activation units Elettrotecnica 0133 OP, year of manufacture: 2004, activation temperature range: 50°C-120°C, working area X/Y: 300mm/400mm, machine dimensions X/Y/Z: approx. 600mm/700mm/1300mm, weight: approx. 150kg. 3) 3x sole presses Elettrotecnica 160, years of manufacture: 2013/2014, pressing force: approx. 800kg, pressing time: 30s, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 320kg. 4) Heat-Setter Mollina & Bianci CS 90 TS, year of manufacture: 2013, temperature range: 50°C-150°C, max. belt speed: 5m/s, machine dimensions X/Y/Z: approx. 1300mm/900mm/1500mm, weight: approx. 350kg. 5) Cooling tunnel Elettrotecnica 488 PS, year of manufacture: 2014, min. temperature: 5°C, machine dimensions X/Y/Z: approx. 1100mm/800mm/1600mm, weight: approx. 250kg. 6) Heat-Setter International 5840, year of manufacture: 2015, temperature range: 60°C-180°C, machine dimensions X/Y/Z: approx. 1350mm/950mm/1550mm, weight: approx. 350kg. An on-site inspection is possible. Prjdpfx Adoxnp Rxenjd

Condition: excellent (used), REF: MM6222 1 X  J&E Hall Fusion 40ft Chiller/Freezer Container. The J&E Hall Fusion 40ft Container is a high-specification, industrial-grade refrigerated unit designed for flexible, large-volume cold storage and transportation. As a versatile solution, it operates as both a chiller and a freezer, offering exceptional reliability, precise temperature control, and superior energy efficiency. Prsdsxiw A Sopfx Adnod This 40ft unit is built into a standard ISO shipping container frame, making it robust, stackable, and easily transportable globally. It is an ideal asset for logistics, food processing, pharmaceuticals, and any business requiring high-capacity, critical temperature management. Key Features and Benefits Dual Functionality: Operates efficiently as both a chiller (for fresh produce, dairy, etc.) and a deep freezer (for frozen goods) -25 degrees, offering maximum versatility. Fusion Technology: The cooling system is engineered for reliable, uniform air distribution and temperature stability, which is crucial for maintaining product integrity across the entire 40ft length. Robust Construction: Built on an ISO standard frame, ensuring structural integrity and suitability for harsh outdoor conditions and intermodal transport (sea, rail, road). High Capacity: The 40-foot length provides significant volume, making it perfect for bulk storage or large-scale temporary temperature control requirements. Hygienic Interior: Features smooth, non-corrosive internal finishes that facilitate easy cleaning and compliance with food safety standards.

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade Prsdpfx Adewgc I Rjnjd • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: G-233F | G-203, Used Triotech G-203 Bubble Tester/Leak Detector Set/System Manufacturer: Trio-Tech International G203 Predjxiwb Uopfx Adned Model: Trio-Tech G-233F Filtration system, Trio-Tech G-203 System with several tools, filtration system, stainless steel control unit, several baskets, air pump. Power: 220 volt. Table not included

Condition: used, Year of construction: 2012, High-speed polyethylene extrusion line, used for single-side polyethylene coating on paper cups and other paper containers. This is an industrial extrusion coating line designed for laminating polyethylene onto paper substrates. The machine produces PE-laminated paper, commonly used in the manufacturing of food packaging (paper cups, trays, boxes, etc.). It is a specialized piece of equipment for the paper packaging industry, providing barrier properties against liquids and grease. Main technical specifications Melt slot length: 1200 mm Finished product width: 500–1150 mm Operating speed: 100–150 m/min Extruded film thickness: 0.01–0.08 mm Maximum roll diameter: 1200 mm Maximum extrusion capacity: 120 kg/h Installed power: 97 kW Psdpfx Aexdimfjdnsrd Dimensions: 7500 × 7800 × 3200 mm Weight: 14 tons

Condition: new, New device MASS International Model NS1 Pjdpfx Adouip Ilonord Angle conveyor / L-conveyor / conveyor belt Available at short notice Adjustable angle conveyor NS1 with collecting plates in the feed section Example as shown: Feed section: 600 mm Incline section: 1300 mm Usable width: 250 mm External width: 305 mm (without motor) Height adjustable discharge height: 750 - 1050 mm Adjustable angle between feed and incline section Tilt angle variably adjustable Cleat height: 30 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on lockable swivel castors Three-piece hopper plates for feed section Other angle conveyors available in different dimensions, see list image 4. Custom dimensions are no problem.

Condition: good (used), Used Thetford International T3 waste compactor. Podshvi Ahjpfx Adnjrd

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Prsdpfx Adehg Rcxenjd Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: used, Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head with angle cutting function 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Predpefhgvwsfx Adned Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 70 kW (95.17 HP), type of input current: three-phase, overall weight: 750 kg, total length: 2,200 mm, total height: 2,300 mm, power: 70 kW (95.17 HP), Air-cooled Hitema chiller – 70 kW cooling capacity Pedpow Ufnhofx Adnsrd Also available for rental R410A

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Podpfx Aewty Etednerd

Condition: new, New device MASS International NS3 Speciale Angled conveyor belt with separator Available at short notice Example as shown: L-shaped conveyor with double roller separator Infeed section: 600 mm Predpfx Ajd Tidxednjd Inclined section: 1300 mm Usable width: 450 mm External width: 505 mm (without motor) Height-adjustable discharge height: 750 - 1050 mm Adjustable angles for the infeed section and incline Black PU belt with cleats Cleat height: 20 mm Cleat spacing: 500 mm Belt speed: 3 m/min Mobile on swivel castors with brakes Side collecting plates in the infeed section Also available as an angled conveyor with supergrip belt and separator (see last two photos) Double roller separator with covered belt drive Covered with super grip Adjustable discharge chute

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-078, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system) 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut Prodjwrn Iyopfx Adnod 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: new, New device MASS International Angle Conveyor / Belt Conveyor L-shaped conveyor belt with fixed 35° angle Available at short notice MASS International Angle Conveyor NC1 Conveyor belt with fixed angle and collecting plates in the infeed section Example as illustrated: NC 1 Infeed section 600 mm Inclined section 1300 mm Usable width 250 mm External width 305 mm (without motor) Height-adjustable discharge height 750 - 1050 mm Fixed angle between infeed and inclined section Inclination variably adjustable Cleat height 30 mm Cleat spacing 500 mm Prjdshm Axgopfx Adnod Belt speed 3 m/min Mobile on swivel castors with brakes Optional: Dimensions to customer specification FDA-compliant belt Modified belt speed etc.

Condition: new, New machine MASS International Color Mixer / Batch Mixer Pjdpfsu Ti Tvox Adnerd Mixer for plastic granulates Available for prompt delivery from stock Example: Mixer MV 2 Steel construction Capacity: 200 liters / 120 kg granulate Length: 700 mm Width: 700 mm Height: 1050 mm (including control panel 1250 mm) Mobile on lockable swivel castors Dual extraction ports for suction lance, Additional discharge opening at the bottom, Safety switches on inlet cover and discharge opening, Height adjustable in 25 mm increments, Inspection window for fill level monitoring Control via control panel Interval and continuous mixing modes adjustable Description: MV batch mixer for thorough blending of the entire plastic granulate batch. Ideal for incorporating additional components such as color masterbatch, additives, fillers, etc. Due to the forced guidance by the screw sleeve, the entire plastic granulate is continuously moved inside the mixer and becomes quickly and completely blended with the added components. There are no "dead" corners that remain unmixed, as is often the case with conventional screw mixers or agitators.