Used Circular Knives Grinder for sale (4,274)

Condition: used, Technical details: voltage: 220 V / Hz Blodpfou Ngx Dsx Acysp revolution per minute: nicht bekannt U/min weight: 59 kg dimensions L x W x H: ca. 0,38 x 0,44 x 1,2 m Double sanding bench, mounted table unit currently clamped sanding discs: right Ø 180 x 6mm and left Ø 120 x 25mm with sanding supports, right and left, adjustable by 50mm Grinding guard on both sides Grinding block mounted on stand, foot mounting possible *

Condition: excellent (used), PERTICI UNIVER 50 SEMI-AUTOMATIC MITRE SAW This machine is primarily designed for cutting aluminium and PVC profiles. Both mechanical and electrical safety features of the guards have been given special attention. Bledpfx Acsxp Rx Toysp During upward cutting, the operator is protected by the top cover as well as by the machined profile. The cutting angle can be manually set from 0 to 67.5 degrees, both left and right, by rotating the turntable. Seven fixed stops (67.5 - 60 - 45 - 0 - 45 - 60 - 67.5) enable cutting without adjustment. Other positions are set using a graduated rule. Motor: 5.5 HP Three-phase supply Blade diameter: 500 mm Cutting capacity at 90°: diameter 178 mm or 160 x 160 mm 1 carbide blade, diameter 500 mm 2 vertical pneumatic clamps 2 horizontal pneumatic clamps Blade lubrication.

Condition: excellent (used), Year of construction: 2009, Swiveling panel saw T74 from Martin with 3-axis scoring unit, 3m sliding table, and electro-motorized rip fence From vocational school Control panel at eye level with color touchscreen control Sliding table length: 3000mm Saw blade tilting from 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Reinforced drive motor 7.5kW with automatic motor brake Blsdpfxexp Rmdj Acysp Saw blade diameter up to 500mm Saw spindle with Pro-Lock quick-change system Max. cutting height: 170mm Cutting width up to 1100mm electrically adjustable, positionable, and manually movable Tilting angle and height adjustment electrically adjustable Crosscut fence with 2-point stop up to approx. 3350mm Parallelogram cross table with digital angle display Rip fence foldable Extraction ports 120 + 100mm Sliding carriage lockable in any position Handle 1 set plastic saw blade with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scorer unit, fully electric adjustment while running 2 safety hoods Tool compartment Emergency stop switch Operating manual CE mark Machine has minor signs of use on the anodized sliding table. Small cuts on the sliding table repaired. Original paint, only spot touch-up. Excellent condition from vocational school as shown in the original photos. Dimensions approx. 3150 x 3600 x 1700mm (LxWxH). Weight approx. 1950kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see 'More offers from this supplier.'

Condition: excellent (used), CATALOG NO. 6985 TECHNICAL DATA - Max workpiece width: 300 mm - Max workpiece height: 200 mm - Unit: grooved rubber roller + pad + metal roller - Working table: 1230x440 mm Blsdpjlvtm Sefx Acyop - Belt: 300x1900 mm From above: - Rubber slip roller - Unit approx. 7.5 kW - Rubber slip roller From below: - Traction belt - Pneumatic oscillation - 2 feed speeds - Feed motor 0.85 kW - Extraction port diameter: 110 mm - Dimensions (L/W/H): 1250/1000/1950 mm - Weight: 530 kg - Not painted - Used sander - Very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of greater exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2011, Carriage length: 3000 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 154 mm Scoring unit: yes Saw blade height adjustment: electric / position controlled Saw blade tilt adjustment: electric / position controlled Rip fence adjustment: electric / position controlled Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut scale display: scale Crosscut fence with mitre function: yes Saw blade diameter: 450 mm Speeds: variable Blsdpfx Acjxp Radeysp Motor power: 5.5 kW Main motor operating hours: 957 Extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 1200 kg

Condition: used, Technical details: grinding length: 450 mm centre height over plate: 120 mm grinding width: 200 mm grinding spindle - swivable: 350 ° grinding head adjustable: 15° re/li ° grinding head adjustable: vertical: 250 mm adjustment of spindle-head: quer/transversal 230 mm spindle revolutions per minute : 2200/3500/5200 U/min work table:: B x L: 120 x 950 mm table movement: quer: 220 mm table movement: längs/longitudinal=500mm mm table adjustment: 5° / 45° rechts / links ° dimensions of grinding wheel: Ø 120x15 mm dimensions of hydaulic: 0,6x0,5x0,9 mm total power requirement: 1,8 kW weight of the machine ca.: 1,2 t dimension machine xH: 1,6 x 1,2 x 1,6 m dimensions of hydaulic: 600 x 550 x 820 mm The tool grinding machine is currently re-equipped as a surface grinding machine. with Orsta hydraulic power unit Blsdpfxju Ng Ifs Acyjp with dust extraction and various accessories i.D. *

Condition: excellent (used), CATALOG NUMBER 7541 Technical Specifications: - Maximum diameter of main saw blade (without scorer): 400mm - Maximum diameter of main saw blade (with scorer): 350mm - Blade bore diameter: 30mm - Maximum cutting height for 400mm blade: at 90 degrees – 120mm, at 45 degrees – 85mm - Maximum cutting height for 350mm blade: at 90 degrees – 95mm, at 45 degrees – 67mm - Main blade adjustable vertically and for angle - Blade guard - Equipped with side sliding table - Cutting length on sliding table: 1700mm - Cutting width on sliding table: 1400mm - Cutting width at fence: 1350mm - Main motor power: 6kW - Table dimensions: 1190x990mm - With table extension: 1880mm - With table enlargement: 1890mm - With scorer unit - Maximum scorer blade diameter: 120mm Bsdpfxsvwczye Acyolp - Scorer spindle diameter: 20mm - Scorer motor power: 0.75kW - Three spindle speeds: 3500, 4500, 6000 rpm - Brake - Extraction port diameter: 80, 120mm - Machine dimensions (LxWxH): 3050x2200x1600mm - Weight: 800kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Blade guard – Equipped with scorer unit – With table extension and enlargement – Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant rate fluctuations)

Year of construction: 2004, condition: used, Technical details: Saw blade diameter: 450 mm cutting diameter: 150 mm hole of sawblade: 50 mm saw blade diameter: 400 - 450 mm saw blade rpm: 6 / 12 / 24 / 45 U/min cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: round: 150 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm table-size: Ø 700 mm table rotating: 360 Grad clamping capacity: 30 bar electrics - voltage/frequency: 400 / 50 V/Hz total power requirement: 3,6 kW weight of the machine approx.: 1600 kg dimensions of machine: 1,5 x 1,0 x 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE - UNDERFLOOR SAW for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Circular saw with hydraulic material clamping (clamping pressure adjustable) miter +30° to - 90° Equipped with electro-hydraulic control Bodpfxsu Nit Rj Acyjlp Hydraulic pump 2.2 kW; 23 l/min. Coolant system integrated in the machine base Piece counter *

Condition: used, Technical details: max. dia. of grinding wheel: 175 mm revolution per minute: 2750 m/sec. boring diameter: 20 mm number of stations: 2 Stück total power requirement: 0,4 kW weight: 15,4 kg space requirements of the machine approx.: L:380xB:252xH:270 mm technical data: - 4 holes Dm= 10mm are available at the base for mounting on the worktable. - VEM CS 175 motor with 220/380V-50Hz; (1,9&1,1A) Protection class P33, - connector plug CEE 16 Equipment: - with grinding surface and grinding protection on both sides On sale as is!, without test run! * Bsdpfx Aju Ngtbscyjlp

Condition: used, Year of construction: 1977, Technical details: grinding wheel diameter: 200 mm revolution per minute: 3000 U/min with handrail: verschiebbar 30mm current type: 220V / 380V total power requirement: 900 Watt weight: 149 kg dimensions L x W x H: 0,4 x 0,5 x 1,2 m Bedpsu Nguxofx Acyelp Double grinding block Main switch - On/off switch Connection for dust extraction Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm *

Condition: used, Technical details: max. dia. of grinding wheel: 150 mm boring diameter: 20 mm revolution per minute: 3000 U/min number of stations: 2 Stück total power requirement: 250 Watt weight: 30 kg space requirements of the machine approx.: L:0,56xB:0,46xH:1,15 m techn. details: - motor AEG 150/250A-50Hz, 220/380V, connection plug CEE 16 equipment: Bedpfx Aeu Ngtnocyelp - with under table *

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 Blodsu Ngu Sepfx Acysp *

Condition: used, Year of construction: 1986, Technical details: grinding wheel diameter: 200 mm voltage: 380 / 50 V / Hz revolution per minute: 3000 U/min height over floor: 1000 mm current type: 380 V total power requirement: 0,9 (900 Watt) kW weight: 52 kg dimensions L x W x H: ca. 0,4 x 0,56 x 1,2 m Double sanding block mounted on stand currently clamped grinding wheels 2x, Ø 80x x 30mm right and Ø 160 x 30mm left Handrail, movable Grinding guard Holder for cooling water tank Blodpfx Aou Ngxqjcyjp *

Year of construction: 2011, condition: used, Technical details: Bledpfju Niuhjx Acyop saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump *

Condition: used, Year of construction: 2004, Technical details: table diameter: 400 mm Blodpfx Asu Nkxhscyjp table turning speeds: stufenlos U/min tilting range table plate: 90 ° voltage: 230 V / Hz V connected load: 11,8 kVA machine weight approx.: 220 + 173 kg POSITIONER - ROTARY TABLE with welding source Messer Griesheim Application: for circumferential seam welding Welding device: Welding rectifier Messer Griesheim Variomatic 40 for MIG-MAG, direct current; protection class IP 23; cooling type F with remote control Stepless current/drain feed, 4.0 meter hose package Torch head Ground clamp/ground cable Size: L: 1.1 x W: 0.5 x H: 1.3 Weight approx. 279kg Welding turntable MB Milano, TGA 75: swiveling welding turntable up to 90° allows horizontal and vertical welding (direction of rotation left and right) Infinitely variable speed; operation via control panel and/or foot control stands on transport trolley Size: L: 0.8 x W: 0.6 x H: 1.3 Weight approx. 173kg Wire feeder type Eurotrac SLV, feed rate 1.2 - 18 m/min *

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm table movement: Obertisch schräg: recht/links 45° mm Blsdpju Ng Npefx Acyjp table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Technical details: grinding wheel diameter: 200 mm revolution per minute: 2750 U/min total power requirement: 700 Watt current: 220 / 380 A weight: 70 kg dimensions L x W x H: 0,4 x 0,46 x 1,22 m Double sanding block, table-top unit mounted on stand with handrail on both sides, adjustable/swiveling Sanding guard on both sides Use max. sanding discs Ø 200mm max. sanding disc thickness 30mm sanding disc currently clamped on sanding block: left=Ø 160 x 30mm and right=Ø 160 x 22.5mm Connections for dust extraction on both sides Ø 35mm Bljdpfxou Ngvij Acyjp *

Condition: used, Technical details: grinding wheel diameter: 600 mm voltage: 380 V / Hz revolution per minute: 950 U/min total power requirement: 4,8 kW weight: 770 kg dimensions L x W x H: 0,8 x 1,5 x 1,36 m Double grinding block with sanding supports/handrail, adjustable Sanding discs currently clamped left = Ø 340 x 60 mm and right = Ø 540 x 60 mm Bledpou Ngwyefx Acyjp Dust extraction Ø 122mm on both sides *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Blsdpfju Niuzsx Acyop Saw blade feed speed adjustable Without coolant system *

Condition: used, Technical details: cutting capacity: 1 mm round blank diameter max.: 1000 mm cutting capacity: 1 mm round blank diameter max.: 1000 mm Weight approx.: 0,2 t dimension machine xH: 2,0 x 0,5 x 1,4 m Application: manual cutting of round steel sheet parts Bljdpfju Icqyex Acyep upper blade Ø 69mm x 11mm; adjustment vertical 25mm with hand toggle lower blade Ø 74 x 15mm; adjustment NO = fixed Centering fixture with die The material is clamped manually with handle vertival 15mm. Displacement horizontal 500mm manual. *

Year of construction: 2007, condition: used, Technical details: Blodpfx Aeu Nimqecyjp saw blade diameter: Ø 400 - 450 mm hole of sawblade: Ø 50 mm revolution per minute: Spindel: 6 / 12 / 24 / 48 (2 step) U/min revolution per minute: Motor: 1400 / 2800 U/min cutting range 90 degrees: round: Ø 150 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400x30 / 345x70 / 300x95 mm table-size: Ø 700 mm table rotating: 360 ° air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1900 kg dimensions of machine: T:1,5 x B:1,0 x H:2,35 m CIRCULAR SAW SEMI-AUTOMATIC - PROFILE CIRCULAR SAW MACHINE - UNDERFLOOR SAW Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre: 30° - 45° - 90° Operating pressure/clamping pressure: 50bar / 30bar adjustable Hydraulic pump 2.2 kW power output Coolant system with pump Operation via control panel / two-hand operation *

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220-380 - 50 V / Hz Bodeu Ngwmspfx Acyelp revolution per minute: 2750 U/min total power requirement: 900 Watt weight: 87 kg dimensions L x W x H: 0,32 x 0,56 x 1,0 m Double sanding block with handrail, adjustable no grinding protection guard Use max. sanding discs Ø 200mm max. sanding disc thickness 32mm Grinding wheels currently clamped: left = Ø 180 x 24mm and right = Ø 150 x 31mm *

Condition: used, Technical details: max. dia. of grinding wheel: 160 mm Bedou Ngtzepfx Acyelp max. width of wheel: 25 mm capacity: 740 W with handrail: ja / Yes / Sí / Sim Tested, functional. i.D. *

Condition: used, Technical details: saw blade diameter: 250 mm grinding wheel hole diameter: Ø 25 feed - manual: per Hand mm Cutting height: max. 70 mm current: 8,5A / 50Hz / 220V A/Hz/V Blodpfx Aju Nif Tjcysp table-size: L:520 x B:500 mm dimension machine xH: 0,6 x 0,6 x 0,9 m Sale at sales price as spare parts dispenser, non-functional no UVV conformity (accident prevention regulations) *

Condition: used, Technical details: Saw blade diameter: 350 mm cutting range 90 degrees: round: 110 mm cutting range 90 degrees: square: 85 x 85 mm cutting range 90 degrees: flat: 180 x 85 mm cutting range 45 degrees: round: links/rechts: 105 / 110 mm cutting range 45 degrees: square: links/rechts: 85 x 85 / 85x85 mm cutting range 45 degrees: flat: links/rechts: 130x85 / 130x85 mm hole of sawblade: 40 mm range of revolutions per minute - continous: 9 / 18 / 36 / 74 / 4step U/min rotary table: Ø 400 mm/min table swivelabel +/-: 60° rechts und 45° links ° air-pressure connection: 7 bar total power requirement: ca. 2,2 kW weight of the machine approx.: 430 kg dimensions of machine: B: 0,7 x T: 1,01 x H: 2,1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw with which miter cuts of up to 45° inwards or 60° to the right can be made on profiles and solid materials. Vertival circular saw Solid, heavy cast construction max. opening of the vice 180mm cutting counter vertical travel of the saw head: 200mm Vice opening width max. 180mm (jaw size W:220 x H:70mm) Operation via control panel * Blsdpfxeu Nilye Acyop