Used Chip Bonnet for sale (4,454)

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates -Engine: VEM K11R 160 MX2 -Engine power: 15 kW / 2920 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 160 mm -Connection output: 150 x 130 mm Gsdpfsvt R Akex Ankeub -Base plate: 580 x 520 mm -Dimensions total: 990/810/H1055 mm -Weight: 365 kg.

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h Gusdpfxob Ilw Tj Ankjb -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible Gsdpfx Ajb Iqf Nsnksub -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: Gujdpfx Aexwhw Ajnkjb The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, total length: 5,595 mm, total height: 2,031 mm, total width: 680 mm, delivery head: 1,550 mm, ejection height: 1,400 mm, type of input current: three-phase, conveying length: 2,750 mm, input voltage: 380 V, transport height: 450 mm, conveyor belt length: 5,595 mm, input current: 1 A, input frequency: 50 Hz, Deburring conveyor technology for dry operation Type: P-40 Design: Z-shape Chain pitch: 40 mm Conveyor width (standard): 680 mm Container width: 680 mm Loading length: 2,750 mm Gsdpfxowvgpko Ankjub Loading height: 240 mm Loading area: 2,750 mm Incline angle: 30° Discharge height: 1,550 mm Discharge height above floor: 1,400 mm Discharge length: 450.0 mm Total conveyor length: 6,157 mm Lifting eyes: Yes Inclined section covered: Yes Loading hopper: Yes Covers in loading area: Smooth sheet steel Discharge chute: Yes Discharge chute height: 150 mm Reach-in protection per EN618: Yes, conveyor CE-compliant Castors: Yes Adjustable feet: Yes Drive: Gear motor Drive position: Right side Brand: SEW Power consumption: 0.25 kW Overload protection via limit switch (slip ring)

Condition: excellent (used), Chip conveyor from the manufacturer MAYFRAN, model 40.6GS-HR/SP20, conveyor belt length 4200 mm, in very good technical and optical condition, labeling of the control buttons can be relabeled in German or English on request. Godpewk Igaefx Anksub

Condition: like new (used), Year of construction: 2016, operating hours: 1,000 h, functionality: fully functional, Drag chain conveyor systems (5 units) in excellent condition (used only for a few months) Gusdpfxjyc Nfge Ankeb

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Guedpfx Anoq Nmw Ijkjb

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Gsdpfxevvmvfs Ankeub

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower Guodpfjb Ig Ugox Ankeb -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Condition: new, Available from stock in various versions! Suitable, for example, for machines from Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. For installation on aluminium circular saws, ideally suited for double mitre saws and automatic sawing systems. Power output 2.2 or 3.0 kW, with or without remote start feature. 160 litre removable container. 2 extraction ports. Mobile, with 2 lockable rollers. Hoses, connectors, and reducers available to suit your requirements. Gedpfxjwczfao Ankeub

Condition: good (used), Chip extraction, filter extraction, bagging filter Gusdpfxob A E Uhs Ankjb -Drive: 0.96 kW -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Condition: new, Year of construction: 2026, The extractor has a time switch for automatic filter shaking, allowing for any setting of the work cycle! Our technology department has placed great emphasis on creating a motor shaking system, in which the entire filter cleaning cycle takes place automatically in a closed system. A safety lock prevents larger elements from entering the fan. Built-in, soundproof, RETURN OF WARM AIR Reinforced construction with special anti-corrosion coating Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season Advantages of DCV dust extractors have an additional pair of doors for easier bag replacement Durable, massive construction guaranteeing quiet and vibration-free operation of the dust collector the new TC series of extractors has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season A strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors A failure-free filter shaking system with the possibility of working in an automatic cycle A mobile system mobile, facilitating trouble-free movement of the extractors throughout the plant Waste containers designed to maintain 99.99% airtightness of the system, at the same time they have been equipped with a mobile mobile system Control cabinet for switching the device on/off polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters Supply voltage 400 V Power 18.5 kW (25 HP) Engine speed 3000 rpm Filter type Polyester Filter dimensions Φ160 x 920 mm Number of filters 117 pieces Inlet diameter 400 mm Guedpfx Aeudaqyonkob Outlet dimensions 595 x 345 mm x2 Efficiency 15000 m3/h Dimensions (width x length x height) 1500 x 3830 x 2410 mm (without upper elbow) Weight 980 kg

Year of construction: 2003, condition: used, wood chip sieve Gedsx Ta Nfopfx Ankeub

Condition: good (used), Filling quantity: 35 kg Gjdpfogl Auxsx Ankoub

Condition: good (used), Year of construction: 2005, functionality: fully functional, Computer renewed Software WIN 7 Gujdpfx Aox Sd Iconksb Feeder package: Single feeders: 30 pcs 8mm tape 20 pcs 12mm tape 6 pcs 16mm tape 5 pcs 24mm tape Block feeders: 3 pcs 10x8mm tape Tube feeders (via compressed air): 1 pc 20-position 3 pcs 10-position various spare parts

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Gjdpfx Ajin Ewlsnkeub Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: new, Ceramic and plastic vibratory grinding and polishing chips / porcelain chips balls, triangle, tristar, cylinder, elipse, pyramid, cone... Guodpsbdf Evsfx Ankjb sizes and prices on request

Condition: used, Ferwood Code: RU0011365 - Manufacturer Code: 0000506990B - Condition: Used - Compatible Machine: SQUADRABORDA SCM/STEFANI - If interested we offer an overhaul service, contact us. Godpfx Aneva Avcskjub

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1410x1130x1295 mm Weight 320 kg Guodpjvz Ei Ijfx Anksb Total power requirement 22 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 890x1081x830 mm Weight 268 kg Gjdpfxjvz Emaj Ankoub Total power requirement 15 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 740x630x1028 mm Gujdpfxsvz Ende Ankeb Weight 60 kg Total power requirement 3 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 910x1200x850 mm Weight 400 kg Total power requirement 18,5 kw Guodpfxovz Exvs Anksb

Year of construction: 2025, condition: new, Dimensions (L/W/H) 690x771x790 mm Weight 130 kg Guodsvz Enwjpfx Anksb Total power requirement 5,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x847x790 mm Weight 250 kg Total power requirement 7,5 kw Gedpfevz E Dlex Ankjub