Used Champagne Capsule for sale (114)

Condition: used, Option to purchase individual machines separately! Used KRONES carbonated beverage bottling line – capacity: approx. 7,000 bottles/hour • Bottle formats: 330, 500, 700, 750, 900, 1000 ml • The line has been used for cider, sparkling wine, and champagne. • Option for filling beer in returnable/non-returnable bottles. • Possibility to inspect and run the line before purchase. Available immediately. The line consists of: 1. Bottle depalletizer for returnable bottles Kettner 1989 (Kontipack E) 2. KRONES bottle washer for returnable bottles, 1988, Type 150/10-110 3. KRONES bottle capper 4. ADELSKI PP2010 bottle screw-capper, 2007 (Adelski) Fodpfx Acjqi Aw Ns Njfu 5. Manual cork capping press 6. Wirehood application machine (Nortan, Minerva 80-120, 1995) 7. Foil capsule applicator (Nortan, Prisma 80:s, 1994) 8. Labeller + tax strip applicator (Krones Taxomatic, KES-5, 1995) 9. Pressure-sensitive labeler (Krones, Prontomatic, 1994 – for both self-adhesive and glue-on tax strip labels) 10. Bottle dryer KRONES K745-D07, 2005 11. Packman Palletizer (60ASS30, 2002) 12. PABLO stretch wrapper, PL, OW-2 – O-C, 2017 13. Pasteurizer 14. MIXER – Krones 1989 15. Pasteurizer 16. Crate loader for 12-bottle cases 17. Conveyors 18. Control cabinets 19. Documentation

Condition: used, machine/vehicle number: LC596, Technical Specifications & Performance Data This used bottling line is configured for glass bottle handling with a comprehensive sequence from filtration to case packing and palletizing. It is a second hand solution engineered for industrial packaging and beverage production, integrating well-known European manufacturers. The configuration covers rinsing, filling, capping (flush cork and aluminum), capsule application (heat-shrink and polylaminate), adhesive labeling, and end-of-line packaging. Container type: Glass bottles Core monoblock: MBF Syncrofill 1200.25/1200.30LV/360.4SR/240.4AV/240 (rinsing–filling–capping) Fjdpfjyhbhqjx Ac Nefu Filtering: Seitz Orion plate filtration group Bottle preparation: SICK Blancamat 8 bottle washer (pre-labeling) Capsule application: Nortan Prisma 40 (heat-shrink), Robino & Galandrino Astra 6 (polylaminate) Labeling: Cavagnino & Gatti CG E8-4-2NPS (3 stations: front/back/neck), Pago PAG.876 carton labeler Conveying/accumulation: MBF accumulation table (conveyor) Case handling (option set 1): Bortolin & Kemo FOC 23 30 case erector, MA 88/1 divider inserter, IAM 2T AP case packer, MARA HM case sealer, PAC 2000 palletizer Case handling (option set 2): Mas Pack MAS 1200 case erector (400 Vac, 2 kW), Mas Pack Minipack 21/4 case packer (400 Vac, 6 kW), Mas Pack Seal 1200 case sealer, Mas Pack Exacta R Astride divider inserter Auxiliary equipment: PREO E0P051 4R2 hotmelt units, Ber PDC 30 carton scale Selected component years: 2011 (Mas Pack MAS 1200, Seal 1200), 2015 (Mas Pack Minipack 21/4, Exacta R Astride), 2001 (Ber PDC 30) Certifications: CE markings on Mas Pack modules Advanced Automation & Control Systems The line combines automated capsule application, adhesive labeling with multi-station control, and end-of-line carton forming, gluing, and packing. Modules feature integrated safety circuits and CE-compliant controls. Hotmelt application is handled by PREO melters for reliable carton sealing. Quick adjustments across labeling stations and format handling enable efficient changeovers within glass bottle families. Adhesive labeling with 3-station control for front/back/neck labels Automated heat-shrink and polylaminate capsule application Hotmelt application via PREO E0P051 4R2 units CE-compliant electrical panels on Mas Pack packaging modules Operator-friendly HMI/controls at packaging stations (per module) Production Line Integration Capabilities Designed for inline operation, the system integrates filtration, monoblock rinsing–filling–capping, labeling, and complete end-of-line packaging. The conveyorized accumulation table assists with buffer management for steady flow between wet and dry ends. The end-of-line can be configured with either Bortolin & Kemo or Mas Pack equipment to match site preferences and spare parts policy. Inline glass bottle processing from filtration to palletizing Format changeovers supported across labeling and capsule application Compatible with divider inserters for 6-bottle patterns Carto...

Condition: used, Year of construction: 2002, machine/vehicle number: LA14, Technical Specifications & Performance Data The Bottle Washer Dryer 5008 is a rotary carousel drying unit engineered for reliable bottle handling within a used bottling line or standalone drying station. Manufactured by Cimec, this second hand machine delivers consistent performance for beverage production and industrial packaging applications where efficient moisture removal is required before downstream labeling, capsule application, or case packing. Model: 5008 Ffedpfsyhbdlsx Ac Nsu Year of manufacture: 2002 Production speed: up to 3,500 bottles per hour Bottle formats (volumetric): Compatible with 0.5L and 0.75L bottle formats Bottle geometry: Cylindrical containers Bottle diameter range: 60 mm to 115 mm Drying technology: Rotary carousel (hot air) with anti-condensation features PLC installed: No Documentation: Paper manuals and electrical schematics available Advanced Automation & Control Systems The 5008 emphasizes robust mechanical design with straightforward operator control, ideal for facilities prioritizing simplicity and ease of maintenance. While no PLC is installed, the machine’s hot-air drying system integrates anti-condensation management to improve drying effectiveness and reduce residual moisture on the bottle surface. Safety guarding and interlocks are typically part of this class of equipment, supporting safe operation within production environments. Quick mechanical adjustments facilitate format changes across the stated diameter range, helping minimize downtime between production runs. Production Line Integration Capabilities This rotary bottle dryer can operate as a dedicated station or be integrated inline with rinsing, filling, capsuling, and labeling equipment. It is well suited for beverage production lines processing both PET and glass bottles in cylindrical formats. Its compact, carousel-based layout supports smooth infeed and discharge with standard conveyor systems. Format changes within 60–115 mm diameter allow flexibility across common bottle sizes, making it a practical fit for lines handling 0.5L and 0.75L formats. Machine Condition & Maintenance History The machine has undergone a partial refurbishment in 2025 and has been stopped for approximately one month. It is currently packed and covered, available for inspection. The presence of paper manuals and electrical documentation supports easier recommissioning and setup. Overall, the unit presents as a well-kept second hand component suitable for integration into a used bottling line or as a targeted retrofit in an existing beverage production facility. Operational Performance & Versatility The hot-air drying concept with anti-condensation control improves surface dryness prior to downstream operations such as label application or capsule fitting, thereby enhancing label adhesion and presentation. The rotary carousel design ensures consistent residence time and uniform air exposure around the container. Suitable for a broad range of cylindrical bottles, the 5008 supports both PET and glass handling and can complement production of wine and other beverages where high-quality presentation and dry surfaces are required. Ins...

Condition: ready for operation (used), Year of construction: 2007, A fully automatic Dollberg counting and filling machine for tablets and capsules is available. Tablet diameter and output: 5mm: 2000 pieces/min, 9mm: 1800 pieces/min, 10mm: 1600 pieces/min, 12mm: 1400 pieces/min, 15mm: 1000 pieces/min. Capsule size and output: size 5: 1200 pieces/min, size 4: 1100 pieces/min, size 3: 1000 pieces/min, size 2: 900 pieces/min, size 1: 800 pieces/min, size 0: 600 pieces/min. Container feed: 60 containers/min, counter dimensions X/Y/Z: approx. 900mm/550mm/500mm. Documentation available. On-site inspection is possible. Fsdpfx Acov Ubpqj Nsfu

Year of construction: 2006, condition: ready for operation (used), Counting capacity: tablets: 2600/h, capsules: 800/h, containers: 30/h, batch capacity: 10000 units, material: stainless steel. Machine dimensions X/Y/Z: approx. 900mm/700mm/660mm, weight: approx. 40kg. Documentation available. On-site inspection is possible. Ffsdjvzbhyjpfx Ac Nou

Condition: ready for operation (used), Year of construction: 2019, A complete can erecting, counting and seaming system including labeling and cartoning is available. 1) Can unscrambler IMA Swiftpack UN 800S, year of manufacture: 2007, unscrambling capacity: 60 cans/min, formats diameter/height: 45mm/51.5mm, 45mm/84mm, 45mm/96mm, 60mm/80mm, 60mm/122mm. 2) Counting machine Cremer CF 1220, year of construction: 2002, counting capacity: 1000 products/min, counting heads: 1, channels: 12, formats: Capsules (HGK & WGK) and tablets (round & oblong), including one cylinder for storage flaps as spare part. 3) 2x rotary plate Höflinger & Karg S1, plate diameter: 1000mm. 4) CBV Servo lid closing machine (screw capper), year of manufacture: 2019, closing capacity: 40 closing operations/min, lid diameter range: 23mm-100mm. 5) Rudolf Deckert AVM 738 can seamer (crimper), year of manufacture: 2003, seaming capacity: 50 cans/min, can diameter: 45mm/60mm, lid formats diameter/height: 42.4mm/17.15mm, 50mm/12mm. 6) Can and bottle labeler IMA Sensitive 350, year of construction: 2009, labeling capacity: 350 labels/min, can and bottle diameter range: 15mm-78mm, max. product height: 220mm, label length range: 15mm-220mm, label height range: 10mm-140mm, equipped with hot stamping Allen Coding Set S-Compact 50/30 and camera Keyence IV 500 CA. 7) Can and bottle cartoner Uhlmann C100, year of construction: 1988, cartoning capacity: 70 cans/min, max. Can/bottle diameter and height: 60mm/120mm, folding carton length range: 30mm-113mm, folding carton width range: 15mm-85mm, folding carton height range: 70mm-130mm, the machine was converted to cans and bottles in 2017 and equipped with a Mitsubishi D700-SC control system, including GUK Cartonac 91 folder, 3x code reader and luminescence control. 8) Wipotec TQS-HC-A coding and inspection device for serialization, temper evident and weighing, year of manufacture: 2017, inspection capacity: 300 products/min, including 2x Herma 400 label dispenser, dual print head (2 cartridges), camera for print inspection, load cell with weighing belt and hand scanner. 9) Christ FilmTeq 3030 banding machine, year of manufacture: 2011, infeed capacity: 50-200 folding boxes/min, outfeed capacity: 7-50 packs/min, folding box length range: 15mm-400mm, folding box width range: 15mm-90mm, folding box height range: 60mm-150mm, bundle length range: 60mm-400mm, bundle width range: 60mm-150mm, bundle height range: 30mm-230mm. Documentation available. On-site inspection is possible. Ffsdewa Tixopfx Ac Neu

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Fodjg Ailcjpfx Ac Njfu Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 2022, Overview  The GAI filler was manufactured in 2022 by the Italian company GAI. This machine is used to fill sparkling wine into cylindrical bottles from 0,2L until 1,5L. It is equipped with a rinser (air or water) 16 nozzles, 24 electropneumatic filling valves and 3 capping turrets (3 capping heads on each turret). Each capping turret has its own cap feeding and alimentation system. Dedusting unit for the corks is installed. Integrated overpressure roof with prefilters and absolute filters. This machine is sold with an automatic CIP and 2 pallets of microfiltration Win&tech. The machine is still in production and can be visited. The condition of the machine is like new, as it has only 200 working hours. Technical details  Working direction: left to right Capacity: 0,187ml - 4500bph 4°C & 15°C 0,375ml - 4500bph 4°C & 15°C 0,750ml - 4000bph 4°C &  2900bph 15°C 1500ml - 2000bph 4°C & 1500bph 15°C Currently set up for: Glass Bottles: 0,187ml 0,375ml 0,750ml 1500ml  Caps/Corks Cork (boucheuse liège) Screw cap Decorative Cap (Champagne style) Incl. CIP and wine filtration Fjdsv Aag Depfx Ac Njfu

Condition: used, Year of construction: 1997, Overview  This ZALKIN capsule feeder (type ECT) was produced in 1997 by the French manufacturer Zalkin. The machine was part of a bottling line with a capacity of 12,000 bottles per hour and was used to feed natural cork closures. The machine has been idle since production stopped in 2022 and is available immediately. Truck loading is included in the offer. Technical details  Output: 12,000 bottles per hour Application: Feeding of cork capsules, Ø 28 mm Bottle format: 750 ml cider bottles (glass) Fsdew Elvbopfx Ac Nsfu

Condition: used, Year of construction: 2000, Overview  This Selena CH Albagnac labeling machine was manufactured in 2000 and is designed for labeling wine and cava bottles. It can handle up to six different bottle models and has three labeling stations, including one for neck or medallion labels. The machine is being sold because the operator needs a new machine with additional functions, in particular another labeling station. Technical details  Bottle compatibility: adaptation for six different bottle models Labeling stations: 3 (including one for neck or medallion labels) Output: Cava: 500 bottles/hour (with neck/medallion label) Wine: 1,400 bottles/hour (depending on the capsule) Capsule dispenser: Customizable for different bottle types Cap types: Cava: standard and special bottles Wine: cork and screw cap Automation & programming Electronic control of the labeling heads Possibility to create individual labeling programs Fsdpfx Acov Eampj Njfu

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  Year of Manufacture: 2010–2014 Application: Water and other beverages Capacity: Approx. 2,000 bph (330 ml) Approx. 1,670 bph (500 ml) Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) Closure Type: 26 mm crown caps Configuration (Monobloc): 16 rinsing heads 16 filling heads 1 crowning head Scope of Delivery  Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts DE filter | Spadoni | - | 2011 | 80 hl/h Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules   Ffsdjyb Tkdspfx Ac Nju

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Ffsdpfx Acowhk Dvj Nju

Condition: used, Year of construction: 2000, Overview  This Auxiemba Gacela RSA 9-III-IZ is a self-adhesive labeling machine manufactured in 2000. It was used for labeling cava (champagne) bottles with a capacity of 6,000 bottles per hour and can be adapted for wine bottles (8,000-10,000 bottles per hour). The machine has already been dismantled and stored. All technical documentation is available. Technical details  Capacity: 6,000 bottles per hour for cava 8,000-10,000 bottles per hour for wine Labeling stations: 3 heads (front, back, neck label) Possibility of retrofitting a fourth head Label infeed: 3 double roll unwinding stations with splicing function Electrical specifications: Voltage: 3 x 380V Frequency: 50 Hz Power: 20 KVA Fedpfx Asv Aafmjc Njfu

Condition: used, Year of construction: 2022, Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data Application: Sparkling wine (glass bottles) Capacity: Up to 4,500 bph Formats & Speeds: 0.187 L: 4,500 bph (4°C & 15°C) 0.375 L: 4,500 bph (4°C & 15°C) 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) Operating hours: 2,100 Scope of Delivery  Depalletizer | DUETTI | M Automatic | 2022 | — Rinser–Filler–Capper Monoblock | GAI | 4033 (16 rinser valves / 24 filler valves / 3×3 capping heads) | 2022 | Isobaric Automatic CIP System | WIN&TECH | — | 2022 | — Microfiltration Pallets (x2) | WIN&TECH | — | 2022 | — Wirehooder | ROBINO & GALANDRINO | REKORD 6 | 2022 | — Level & Cap Inspector | CMP | — | 2022 | — Capsule Distributor & Monoblock | ROBINO & GALANDRINO | ZENITH F 3/18 | 2022 | — Adhesive Labeller | MAKRO | 4 Stations | 2022 | — Bottle Conveyors | — | — | 2022 | Included Ffodpeyb Tf Iofx Ac Nju

Condition: used, Year of construction: 2014, Overview This MONO-BLOCK bottle filling line was constructed by KOHEM (now CIMEC) in 2014. It operates perfectly and has been well-maintained. Currently, it is dismanteld and stored. The bottle-formats are 33 cl long neck, 75 cl ”champagne-style” and 375 cl champagne style. The capacity is 1000-1300 bph when doing 33 cl long necks. Equipped with pneumatic offloading solution. Machine list Labeling Machine (2014) Manufacturer: CDA Model: R1000 Filler Capper (2014) Manufacturer: Kohem (now Cimec) Model: RIS 8/1 - DPS Ffjdpfott Um Hsx Ac Neu

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Fjdpfx Acov S Eure Nefu Sold as seen

Condition: excellent (used), Complete contents of protein powder factory which was set up in 2015. All Machinery in lovely condition. machinery includes Winkworth mixers pot and bucket filling lines, capsule and tablet counters, sieves etc. Ffedpfxjw Nivle Ac Nsu

Condition: used, Year of construction: 2010, functionality: fully functional, MARCHESINI BLISTERING LINE composed of 1) MARCHESINI BLISTERING MACHINE, MODEL MB460 Continuous motion machine for PVC/ALU blisters (can also process different materials in polypropylene, PET, PVC+Aclar, COC). Thermoforms the blister packs and fills them with products of various shapes (capsules, tablets, oblongs and others), seals the cover and discharges the packaged blister packs onto the output belt. Design, construction and ergonomics are compliant with cGMP standards. Balcony technology for easy access, maintenance and cleaning. Built in 2010. PRODUCTION Production speed: up to 600 blisters/min Fjdpfoycxb Dox Ac Nefu Blister size: Width: 30 - 86 mm; Height: 3 - 12 mm; Length: 70 - 140 mm 2) MARCHESINI CARTONING MACHINE, MODEL MA352 Continuous motion horizontal cartoning machine, suitable for high-speed cartoning of bottles, vials, droppers, etc. Entirely with a balcony structure for maximum accessibility, extremely fast format changeover times and minimal maintenance. Built in 2010. PRODUCTION Mechanical speed: up to 400/minute Format range: A: 25 - 70 mm; B: 15 - 85 mm; H: 65 - 150 mm ENERGY CONSUMPTION Installed power: 7.5 kW; Compressed air consumption at 6 bar: 240 Nl/min 3) METTLER TOLEDO DATAMATRIX STATION Serialiser for pharmaceutical product packaging. Built in 2020. - 2 megapixel camera - full track and trace compliance - Output: 400 pcs/minute (max) 4) OCS CHECKWEIGHER, MODEL HC Built in 2009. PRODUCTION Number of weighings: 400 pcs/minute (max) Range: From 0.1 g to 750 g / 0.0d to 10 g Max. speed: 1.67 m/s CHARACTERISTICS Energy: 230 V 50 Hz

Condition: excellent (used), Easycount CD5 tablet counter Serial: 51002040 Stainless, easycount will make a precise inventory of all hard and soft gelatin capsules and most sizes and shapes of tablets, fill all kinds of containers exactly and automatically, check number of full containers at any time and identify how many pieces have been counted in the last and incomplete containers, 1Ph Ffodpfx Acsiy Nngs Neu

Condition: excellent (used), Manesty D3B tablet press Manesty 16 station tablet press, up to 500 tablets per min, max tablet diameter 25mm, max depth to fill 20mm, 3Ph Fodpfx Acjiy Nn Ij Nofu

Condition: used, Containers for powder and capsules. Total volume: 500 litres Useful volume: 300 litres according to manufacturer's plate Quantity : 12 Polished stainless steel 316 Pyramidal bottom Total opening Ffedpfx Aox Rz Tgec Nou Lid Drainage trapdoor 150 x 150 Overall dimensions 750 x 750 x 1350

Condition: used, Year of construction: 2000, Single-head capping machine Zalkin TM125 La cadence maximale de cet équipement est d’environ 3000 flacons / heure L’introduction des bouteilles se fait par accumulation. Sens gauche -> droite Current format: Plastic capsule: diameter 60.5 mm x 4.5 mm Aluminium capsule: diameter 62 mm x 4.5 mm Possibility of changing the capping head. Roue 16 alvéole : diamètre primitif 530 mm / diamètre alvéole 56 mm - Distributeur de capsule (Bol vibrant + goulotte de distribution prise à la volée) type ADV N°6430 et 6428. - Table tournante : alimentation flacons Inlet belt: 2000 mm / width 110 mm Inlet belt on the machine: 1500 mm Outlet belt: 500 mm Crimping head 104 Tension : 380 Volts 50 hz Ffodpfx Acjx Rz Hts Nou coffret électrique coté sorti. 1 cellule de contrôle présence flacon capsule plastique 1 cellule de contrôle présence flacon capsule aluminium. 1 cellule détection d'accumulation 1 cellule détection de bourrage

Condition: used, Manometer, test manometer, pressure gauge with Bourdon tube, pressure and temperature measurement technology -Manufacturer: Wika, capsule spring pressure gauge, unused original packaging -Type: 0 to 4 bar Ffedpfx Asirax Rjc Neu -Screw connection: see photos -Number: 9x manometer available -Price per piece -Dimension: 110/85/H110 mm -Weight: 0.8 kg/pcs

Condition: good (used), CNC control, control panel, control desk, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, printed circuit board, analog distribution card, distribution print card, valve amplifier, bus print, bus board, processor card, coupling card, temperature control card -Manufacturer: Siemens, control electronic modules from injection molding machine Demag D 100-275 NC -Power supply: Type E220 G5/15WRGD -Adapter capsule: Type 6ES5 491-0LB11 5 pieces -Interface modules: 6ES5 306-7LA11 Ffedpfen H Etfjx Ac Neu -Subrack: 6ES5 700-2LA11 -Individual components: see photos -Price/Sale: complete -Dimensions total: 485/220/H305 mm -Weight: 12.3 kg

Condition: excellent (used), Manometer, test manometer, Bourdon tube pressure gauge, pressure-temperature measurement technology -Manufacturer: Wika, capsule pressure gauge, unused OVP -Type: 612.20.100 0 mbar...250 mbar -Art. No.: 9071687 -Screw connection: G1/2 B bottom -Number: 2x pressure gauges available -Price: per piece -Carton dimensions: 140/110/H55 mm Ffsdpfx Aoggy S Tec Nou -Weight: 0.6 kg/piece