Used Chamber Filter Press for sale (20,790)

Condition: used, Year of construction: 2005, Used 3.6-meter CNC press brake by Ermaksan Hsdezh Icyspfx Aahep Type: AP 3600 x 200 Capacity: 3600 x 200 tons Elgo NC control system 1 set of tooling Year of manufacture: 2005

Condition: used, Year of construction: 2017, Used 3-meter press brake from Safan Type: E Brake 100 3100 Hsdjzh Ibvspfx Aahep Capacity: 3100 x 100 tons Y1, Y2, X, Xdelta, R, Z1, and Z2 are CNC-controlled E Control Hydraulic WILA top clamping system 1 set of complete tooling Year of manufacture: 2017

Condition: ready for operation (used), Year of construction: 1969, Spindle bore diameter: 80 mm Hedpfx Aajzh Ibpjhep Bore: 15 mm Stroke: approx. 550 mm Overhang: 250 mm Table size: 300 x 370 mm Table cut-out: 85 mm Space requirement: 1000 x 800 x 2000 mm

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Hsdpfx Ajzh Huheahop Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR Hjdpfezh Ht Rox Aahjp This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Hodpfx Aaozh Htwshjp Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), TIRA Type: TCC 7120 Temperature range: -75°C / +180°C Air-cooled condenser Temperature stability (over time and in the center of the usable space): ±0.1°C ... ±0.3°C Maximum temperature change rate: Heating: 4°C/min Cooling: 3°C/min Humidity range: 10% to 98% relative humidity Humidity stability over time: ±1% to ±3% Dew point range during long-term tests: +2 / +94 °C Dew point range during short-term tests: -20 / +2 °C External dimensions (L x W x H): 1320 x 2235 x 2137 mm Test chamber dimensions (L x W x H): 1000 x 1130 x 1020 mm Test chamber volume: approx. 1152 liters Max. load per shelf: 50 kg Maximum floor load of the test chamber: 100 kg Refrigerant: R404A and R23 Power supply: 400V + 6%/-10% / 50Hz / 3P+N+PE Rated power: 10.2 max. 17.5 kW Rated current: 19.5 max. 32.0 A Noise level: approx. 80 dB(A) Weight: 1180 kg For your security as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components Hsdpszh Htqjfx Aahjp 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: ready for operation (used), Konica Minolta Accurio Press C 4070 with 1.8 million copies, fully equipped, in good condition, tested, and ready to print. Equipment: - DF 713 - UK 112 - PF 707m - HT 506 - FS 532 m - RU 518 m - HT 511 - Fiery IC 609 As an experienced retailer of used copiers, we have developed genuine expertise in packing and pallet/container shipping to guarantee that our customers receive machines in perfect condition. Hjdpfx Aaezh Hqpehsp Our company offers the largest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: ready for operation (used), Konica Minolta Bizhub 6120p with 5.9 million copies, fully equipped and in good condition, tested and ready to print. Hedpfxezh Hn Ij Aahop Equipment: - PF 710 - RU 510 - FS 532 As an experienced retailer of used copiers, we have developed considerable expertise in packing and pallet/container shipping to guarantee that our customers receive machines in perfect condition. Our company offers the widest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: ready for operation (used), Konica Minolta Accurio Press C 4070, with 1.3 million copies, fully equipped, in good condition, tested, and ready to print. Equipment: - DF 713 Hedszh Hnbjpfx Aahep - UK 112 - PF 707 m - HT 506 - FS 532 m - RU 518m - Fiery IC 409 - VI 515 As an experienced retailer of used copiers, we have developed a genuine expertise in packing and pallet/container shipping to guarantee that our customers receive machines in perfect condition. Our company offers the largest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: used, Heißfolienprägemaschine mit 25000kgs Druckleistung / Hot Foil Stamping machine with Pressure 25.000Kg Heißfolienprägemaschine / Hot Foil Stamping GEBA BAIER 49/25 Baujahr / Year 1972 - Serial-No. 72425 Druckleistung / Pressure max. 25.000Kg Prägefläche / Embossing size max. 300 x 430mm Höhenverstellung / Height adjustment ca. 190mm In einem guten Zustand / In good condition Hedpfx Aezh Hawsahep Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 008382, Max width workable: 800 mm Hedpfeywadwex Aahep Max length workable: 2800 mm Max height workable: 1320 mm Max feed speed: 40 m/min

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Hjdpfx Aajzh D S Rshsp Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Hodpfx Aaozh D Ryshjp Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Climate chambers Type: EXCAL 1413-HA Air-cooled climate chamber EXCAL is equipped with a 15-inch capacitive multi-touch panel PC, SSD storage, Windows 7, and 2 USB ports. This makes it state-of-the-art. Technical data: Test chamber dimensions: Width 550 mm x Depth 500 mm x Height 500 mm Housing dimensions: Width 820 mm x Depth 1375 mm x Height 1730 mm Window 350 x 380 Volume: 138 liters Feedthrough installed as standard R1: 80 mm ∅ L1: 80 mm ∅ Data for temperature tests: Temperature range: -40°C to +180°C Temperature deviation over time ± 0.1 to ± 0.3 K Temperature homogeneity spatially ± 0.5 to ± 1.8 K Temperature change rate Heating: 15 K/min Cooling: 10 K/min Data for climate tests: Temperature range +10 to +90 °C Humidity range 10 to 98 % RH Data for operation: 3/N/Ph+T 400V ±10% 50 Hz Rated power 9.8 kVA Refrigerant R-404A / R-23 Weight: 430 kg For your peace of mind as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate Hedpfozh D Rtox Aahop 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive of the swivel nozzle Hodpfx Aaezh D Rmshjp Adjustable swivel angle Replaceable swivel nozzles Nozzle holder swivels and is replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for the test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without... approx. 1820 mm, with... approx. 1850 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Hedpfx Aajzh D N Ajhjp Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), CTS Hjdpfxszh D E Rs Aahjp Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: not inspected (used), functionality: limited functionality, Promecam Press Brake 100 t / 2,000 mm – Uninspected Hsdozhx E Sepfx Aahsp For sale is a used Promecam press brake with a pressing force of 100 tons and a working length of 2,000 mm. The machine is sold as is, without inspection, commissioning, or any guarantees regarding its current condition. Technical Data Manufacturer: Promecam Pressing force: 100 t Working length: 2,000 mm Operating voltage: 400 V Hydraulic drive MB control Manual and automatic operating modes X, Y, and R axes Condition The machine is in used condition, with normal signs of wear and tear consistent with its age. The following functions have been verified: Control starts Hydraulic pump runs X-axis moves Known defects: Y-axis is currently not functioning R-axis is currently not functioning Further functional testing or adjustment has not been performed. Scope of supply Machine as shown in the picture No tools included

Condition: used, Year of construction: 2007, machine/vehicle number: 1593, functionality: fully functional, pressing force: 400 t, stroke length: 300 mm, table width: 1,200 mm, table length: 800 mm, ram plate width: 1,150 mm, ram plate length: 600 mm, overall weight: 44,000 kg, DMS 40 Mechanical Press 400 kN 25 strokes per minute Max capacity 9500 kg Max die dimensions 1150x500 mm Hsdpfezhuk Rex Aahjp

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 6411, clamping force: 8,000 kN, "IMV Presse HPF-AZ80 Hydraulic Injection Molding Press 800ton with overhead hydraulic tank and robot loading system. Hjdezhugxepfx Aahop

Condition: used, Year of construction: 2001, functionality: fully functional, The Schaal SEP 80 is a 80-ton eccentric press designed for precision stamping and forming. Its Unidor electronic control system ensures repeatable stroke accuracy and fast setup, while the integrated tool safety device protects dies from damage caused by misfeeds or incorrect part positioning — reducing downtime and tooling costs. The machine features a rigid double-column O-frame in vibration-damping cast iron, 6-point play-free roller ram guidance, and a flywheel drive with pneumatic clutch/brake combination. It comes equipped with a gripper feeding device SZV 302 feed unit for automated strip feeding. Pressing force: 800 kN (80 tons) Strokes per minute: 60 – 320 min⁻¹ Ram stroke (adjustable): 8 – 80 mm Ram adjustment: 80 mm Ram surface: 700 × 500 mm Table size (clamping plate): 830 × 700 mm Clamping plate thickness: 80 mm Table opening: 500 × 200 mm Hedpfxezhw Huo Aahjp Strip feed clearance: 120 ± 40 mm Feed unit: Schaal SZV 3 Strip width: 10 - 270 mm Thickness: 0 – 4 mm Drive power: 21.5 kW Weight: 8,000 kg Footprint: 1,500 × 2,000 mm, height: 2,885 mm

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Year of Manufacture: 10/2022 Hodpfx Aaey U I Tujhep Technical Data: Maximum Press Force: 800 kN Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: excellent (used), functionality: fully functional, Stromab STA 2500 pneumatic assembly press Hjdpfxjzhv Tys Aahep Working length: 2500 mm Working width: 1200 mm Clamping force at 8 bar: 2600 kg 2x side clamping Pneumatic control CE certified

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg Hjdozhvaajpfx Aahjp ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)