Used Chaining Routers for sale (2,512)

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm Gsdpfx Asphvl Tef Uebi dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Gbjdshwt H Ajpfx Af Usi Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Gbsdpfxeviwdms Af Uei Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: good (used), Code: 0309 Brand: COSMEC Model: KV 1000/C Copying Router Technical data: Clearance from upright to spindle center mm 1000 Spindle vertical run mm 115 Spindle speed : 12000/18000 rpm Gbodpsylpp Dsfx Af Usi Worktable dimensions mm 900 x 1000 Overall dimensions: mm 1850 x 1050 x 1800 h Weight kg 1000

Condition: used, Year of construction: 2019, operating hours: 11,100 h, CAT 336 tracked excavator Gbsdoynrgqepfx Af Usi The machine has only 11,000 operating hours and is in good condition Operating weight approx. 36,800 kg Air conditioning

Year of construction: 1984, condition: used, Copy router Rotox Type KF 257 Gjdpfoillylex Af Usbi

Condition: used, Year of construction: 2005, functionality: fully functional, operating hours: 6,650 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 290 mm, workpiece weight (max.): 500 kg, number of slots in tool magazine: 15, controller manufacturer: Bosh Rexroth, overall weight: 5,500 kg, table length: 4,000 mm, table width: 1,300 mm, spindle motor power: 10,000 W, nominal power (apparent): 25 kVA, number of spindles: 1, rapid traverse Z-axis: 20 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rotational speed (max.): 24,000 rpm, rotational speed (min.): 1,200 rpm, spindle nose: HSK63F, spindle speed (min.): 1,200 rpm, tool length: 240 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, ArtisX6 BRIEF DESCRIPTION. 1 10 kW working electrospindle; constant power in the range of 12,000 to. 24,000 1/min; working range: 1200–24,0001/min. Tool socket: HSK63F. Axis working ranges: X = 4600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis= 360° Axis approach speeds: in the X/Y plane = 85 m/min; Z = 20 m/min Gateway: 290 mm 1 automatic disc tool magazine, 15-position. Max. tool length: 240mm, max. tool weight: 6kg L-shaped drilling unit, power 2.2 kW, spindle speed 4500 1/min, spacing 32 mm Machine table: wooden (high-quality waterproof plywood). Dimensions: 4000 x 1300 mm 2 x 4 pneumatically extendable base pins (fi 25 mm, stroke 115 mm). Tool set: yes (including some never used) Table division into two stations for alternating work 1 vacuum pump with a capacity of 250 m3/h and a surge tank with a capacity of 500 l Machine safety (EU standard): BUMPER bumper system (without the use of mats, photocells, etc.) Bosch Rexroth PNC control, BTV 16 industrial PC computer, Pentium III processor, RAM 256 MB, HD 10 GB, network card Profibus SERCOS drive control system Data input: USB-Stick, local network Operating system: Windows2000. ProEmbSys Touch screen CAD/CAM software: Alpha/CAM Movable control panel with manual control panel Remote diagnostics Interpolation: 5 linear, 2 ½ D circular Connected power: approx. 25 kVA Central lubrication Weight: 5.5 t Gbjdpfx Afewh Aide Usi Machine in very good condition, 100% efficient. Storage location: northern Poland

Condition: ready for operation (used), Arm lifting capacity 125 kg, length 310 cm Chain hoist with remote control, lifting capacity 125 kg, year 2006 Suction cup, lifting capacity 250 kg, year 2009 Gbjdpfxeynitue Af Usi Foot length 300 cm

Condition: used, machine/vehicle number: 008016, X axis working area: 3300 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 10 KW Number of controlled axes: 5 axes Total number of drilling spindles: 35 Total number of tool changer positions: 14 Godpfxjw Idhms Af Ujbi

Year of construction: 2007, condition: excellent (used), machine/vehicle number: WD700/10, Technical data: Gedpfjv Hv Edsx Af Uobi 1 Vetter / Demag pillar jib crane NL 500KG with Demag chain hoist Type AS5-4.0 Payload at full reach 500 KG / 0.5 tonne payload Height: approx. 3.75m UK boom: approx. 3.42m Reach: approx. 3.5m Hook height: approx. 2.85m Total weight approx. 800Kg including dowel plate 1050mm with Demag chain hoist 500Kg (older) Swivel range 270°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: used, Year of construction: 1988, operating hours: 14,890 h, Equipment: all wheel drive, Manufacturer: EDER Hydraulikbagger GmbH, 8359 Eging Model: M 835 Year of manufacture: 1988 Chassis no.: 61588 Permissible total weight: 21,000 kg Front axle load capacity: 12,000 kg Rear axle load capacity: 12,000 kg Made in Germany Including grab, the machine runs well. Godpfx Afoynfkps Uebi

Condition: excellent (used), Catalogue number 7670 TECHNICAL DATA - Track width: 340 mm - Roller width: 400 mm - Max. blade diameter for multi-blade saw: 350 mm - Blade bore diameter: 80 mm - Max. cutting height for edger: 100 mm - Max. cutting height for multi-blade saw: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm - From above: - Kickback fingers - Pressure roller, sliding, metal - Kickback fingers - Pressure roller, sliding - Saw shaft with blades - Pressure roller, sliding - Sliding pressure shaft, metal - From below: - Guide bar - Kickback fingers - Track - Central lubrication - Stepless feed speed adjustment - Electric lifting of saw shaft 0.75 kW + body 1.1 kW - Feed motor 1.5 kW - Main motor 22 kW - Floating saw movement 0.55 kW - Lasers (not working, require inspection) Gsdpfsyk E Hpjx Af Ujbi - Extraction port diameter: 210 mm - Overall dimensions (L/W/H): 2200 x 1450 x 2000 mm - Weight: 1925 kg ADVANTAGES – Made in Germany – Shaft with floating blade for edging – Additional sleeve for multi-blade saw included – Used multi-blade saw, in very good condition Net price: 58,900 PLN Net price: 14,030 EUR (based on exchange rate 4.2 EUR) (Prices may change with larger fluctuations)

Year of construction: 1977, condition: good (used), swivel head, top-down adjustment of the table top, Gedpfeicld Tex Af Ujbi two types of speeds: 18,000 and 24,000, overall dimensions: height 1570mm, width 1170mm, length 1150mm,

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Gbedpfetw Sm Nox Af Uei Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Feeding length: 2200mm Feeding height: 950mm (adjustable) Drive power: 0.18kW (Getriebebau Nord) Condition: slight paint wear, otherwise as good as new

Condition: good (used), Year of construction: 2011, Electric chain hoist, crane, overhead crane, assembly crane -Manufacturer: Yale, electric chain hoist -Type CPE 75-1.6 Load capacity 7500 kg Gbjdpfox E Sq Ejx Af Uei -Main stroke: 1.6 m/min -Chain length: 9 m -Transport dimensions: 1200/800/H520 mm -Weight: 235 kg

Condition: used, machine/vehicle number: 008340, X axis working area: 4400 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 5 axes Gedpfx Afex A Tg Hj Ujbi Total number of drilling spindles: 36 Total number of tool changer positions: 30

Condition: used, Year of construction: 2022, operating hours: 8 h, For sale is an almost new 315 crawler excavator (year of manufacture 12/2022). The machine has only 8 operating hours and was used exclusively as a display unit. The excavator is in like-new, virtually unused condition. Gsdpfxjym I Eys Af Usbi

Condition: used, Year of construction: 2021, operating hours: 11,213 h, Internal vehicle no.: MK300022 German vehicle Available immediately at our yard in Kaufungen - Kassel Gjdpfx Aoym H R Isf Uobi For more information, contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HITACHI ZX210LC-6 crawler excavator Year of manufacture: 2021 11,213 hours 23.1 tonnes Subject to errors and prior sale We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, weight max. 250 kg stroke / mm Load: 250 kg Chain length: 2.5 m Weight: approx. 30 kg Gsdpoykvbqjfx Af Ujbi

Condition: like new (used), functionality: fully functional, Year of construction: 2023, lifting height: 11,000 mm, overall weight: 7,000 kg, lifting speed: 250 mm/s, power: 5.5 kW (7.48 HP), input voltage: 230 V, input frequency: 50 Hz, Two (2x) entire units, each with maximum 11m lift, procured directly from manufacturer, delivered in 2024 but never assembled or used. All components have been stored in dry conditions. Can be configured for less than maximum lift. All documentation available. Gedpfsymx Avjx Af Usbi Price is per unit. Open to counter-offers. Purchaser must collect.

Condition: excellent (used), functionality: fully functional, lifting height: 2,000 mm, load capacity: 15,000 kg, Offering a slewing jib crane with Demag chain hoist, column height is 286 cm, and jib length from the slewing pin is 320 cm. Godpfsymv T Ssx Af Usbi

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 7,500 h, * 7,500 operating hours * Dozer blade * Oilquick OQ60-5 quick coupler * Fully piped * Steel tracks with bolt-on pads * Operating weight 15,500 kg Gbedpfxjymmkno Af Uji

Condition: used, Used machine Gbjdpjyklfxofx Af Uoi

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: VM-WO-250-90-0-2-AAM00064R, total length: 1,600 mm, load capacity: 250 kg, throat depth: 650 mm, Schmalz plate vacuum lifter, original packaging, year of manufacture 2024, with two suction pads, maximum plate load of 250 kg. Boom arm swivels 180°, up to 3500 mm. Suction plate design: transverse orientation. Suction pad length: 550 mm, width: 200 mm, quantity: 2 pcs. Accessories: Spiral hose for compressed air supply: 2500 mm, compressed air supply length to crane: 12 m, number of hose connections: 2 pcs. Weight: 0.00178 kg. Customs tariff number: 84289090. Country of origin: Germany. Gbsdpeycva Refx Af Uoi

Condition: new, Year of construction: 2026, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 300 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: electric, total height: 2,275 mm, total length: 4,060 mm, total width: 3,315 mm, overall weight: 1,700 kg, Equipment: documentation/manual, The 2128 PANA ATC is a next-generation DANIBRUM CNC router, designed for modern workshops and manufacturing facilities seeking high productivity, consistent precision, and efficient automation in a single, fully integrated machine. Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine offers rapid tool changes and extended flexibility for processing a wide variety of materials: particle board, MDF, solid wood, plastics, Alucobond, and composites. The robust machine frame is supported by 25 mm linear guides, helical rack and pinion drives M1.25, and 750 W servo motors, ensuring fast, smooth movements and precise positioning across all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, allowing fine speed adjustment and stable performance under load. The result is a reliable, fast, and versatile CNC router, tailored to the current demands of furniture production and industrial processing. Gjdpfx Asymcncjf Uebi