Used Chain Harrow for sale (2,665)

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. Itjdpotp S E Ejfx Aa Eji The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block. Iedjwd Tgfopfx Aa Ejti

Condition: used, Chain conveyor - IDL000773 Iedpfx Aeufib Rsa Esti - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw.

Condition: good (used), TECHNICAL DATA Conveyor I: SAFO TW-60 conveyor length 2 x 5000 mm Itsdpfx Aaezlpufs Esi conveyor width 600 mm Conveyor II conveyor length 4500 mm conveyor width 330 mm Conveyor I, SAFO TW-60, year 2011, net price: 15,000 Conveyor II, net price: 10,000 The price stated in the advertisement applies to both conveyors. Net price: 25,000 PLN Net price: 5,952 EUR, depending on the exchange rate of 4.20 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), functionality: fully functional, power: 138 kW (187.63 HP), fuel type: diesel, Year of construction: 2021, operating hours: 8,119 h, Equipment: gripper hydraulics, Kobelco SK260 NLC-10E/GPS Laser Topcon X-73X/Long Reach/Long Front • Manufacturer: Kobelco • Model: SK260 NLC-10E • Year of Manufacture: 2021 • Operating Hours: 8119 hours • Power: 138 kW / 187 hp • 4-cylinder diesel engine • Engine: Hino J 05 EA-J05E-VB • GPS System: Topcon X-73X • Long Front • Long Reach • High and Low Speed • Heated front and rear windows • Rubber pads • Max. reach: approx. 18.53 m • Digging depth: 14.73 m • Radio • Overload warning system • Swivel bucket • 360° camera system • Heater • Air conditioning • Central lubrication system • Grabber hydraulics • Rotating beacon • Transport length: 14.50 m • Transport width: 3 m • Transport height: 3.20 m • Total weight: 28400 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical errors not excluded. - Sale subject to our general terms and conditions. Iedpfxozlg Rks Aa Ejti

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: CR042, 1 Demag column-slewing crane NL 2000 KG Itodpfxozmp Nlj Aa Esi Load capacity at full outreach: 2000 KG / 2 tons Height: approx. 4.1 m, upper carriage outreach: approx. 3.6 m Outreach: approx. 5 m, hook height: approx. 2.8 m Total weight: approx. 1200 kg Includes 2000 kg Demag PK10 chain hoist with trolley and slewing drive (2 lifting speeds) Connection: 400 V, 16 A, slewing range: 360° Crane is disassembled and immediately available Item location: 75053 Gondelsheim Only the crane system shown in the pictures is being sold. Very good condition – see pictures. Shipping via freight forwarder or collection by appointment.

Condition: used, Year of construction: 2001, 1 unit of CLEMENS TK 150 disc harrow Iedpfx Aozlcybsa Ejti Weight: approximately 450 kg, serial number: 006013 Color: as shown in the pictures, see pictures and inspection Year of manufacture: 2001 Condition: used

Year of construction: 2026, condition: new, WISSMATEC scraper chain conveyor Overhead conveyor sturdy steel construction chain with scraper bars Isdpfx Aszmm Tzoa Esti drive with geared motor magnetic separator

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Isdpfx Aoyuty Sea Ejti Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 1994, Manufacturer FRAMAR – Italy Vertical machining: 0 - 180 mm Cross travel: 0 - 150 mm Itedpfsyxx A Iox Aa Eei Longitudinal stroke: 0 - 270 mm Table size: 540 / 110 mm Vertical table travel: 0 - 90 mm Work table tilt: 0 – 45 degrees Milling unit angle adjustment: 0 – 45 degrees Maximum door width: 950 mm Motor power: 1.5 kW Operating speed: 2800 rpm Location: in stock at 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Pneumatic tensioner Revolver stop Material support Pneumatic foot pedal Iodpfx Aevk Dqvoa Eoti Location: from stock 54634 Bitburg - immediately available -

Condition: used, functionality: unexamined, Year of construction: 2006, KITO 2-Ton Electric Chain Hoist with Beam Trolley – 2006 – Complete Crane Beam High-quality KITO electric chain hoist complete with an electric beam trolley, mounted on a steel crane beam. Manufactured in Japan, KITO hoists are known worldwide for their reliability, durability, and long service life. This complete set has been professionally dismantled from an industrial production facility and is available immediately from our warehouse in Rotterdam, the Netherlands. Suitable for workshops, warehouses, production facilities, and industrial lifting applications. Manufacturer KITO Corporation Country of Origin Japan Type Electric Chain Hoist with Electric Trolley Model TS020 Safe Working Load (SWL) 2,000 kg (2 Ton) Motor Power 1.8 / 0.6 kW Lifting Speed 4 / 8 m/min (50 Hz) Protection Class IP55 Voltage 220–230 / 380–400 Volt Frequency 50 / 60 Hz Control Pendant control included Manufacturing Year 2006 Condition Used Location Rotterdam, The Netherlands Iodpfxszmgqge Aa Ejti SURPLUS – Industrial Solutions From Surplus to 2nd Life

Condition: excellent (used), Manual chain hoist make Tralift Spur gear chain hoist lifting height 9 meters Year 2001, very little used Isdpfx Aoufpu Dja Ejti weight 140 kg Load chain 10 x 30 meters 2 pieces available

Condition: used, functionality: fully functional, power: 231 kW (314.07 HP), Year of construction: 2004, machine/vehicle number: KMTODO61E02076058, fully functional Itjdoylyp Ujpfx Aa Eoi

Condition: used, Equipment: soot filter, - Particle filter - Air conditioning - 3 buckets - Oilquick quick-coupler system Isdpfx Aaezl Nyzj Eoti - 11,850 operating hours

Condition: used, Year of construction: 1968, Unit can be swiveled. Unit can be moved left and right via handwheel. Maximum milling depth: 150 mm - 180 mm. Slot length: approx. 250 mm. Weight: approx. 320 kg. Storage location: Nattheim. Ijdpszkl T Usfx Aa Eeti

Condition: used, Year of construction: 2014, operating hours: 5,500 h, Liebherr R924 LC Compact Litronic/Hydraulic Excavator Operating Hours: 5500 h Weight: 26300 kg Ijdpfxszlw Ugo Aa Eeti Engine Manufacturer: Liebherr, short-tail swing Engine Power: 120 kW Air conditioning Engine Type: D934S TOP machine? * Sales Consultant Information * + * An appointment is required for a test drive or inspection. * + * Trade-in and financing options are available. * Errors in the description cannot be ruled out. * Please verify the equipment. Errors and prior sale are subject to change.

Condition: used, Year of construction: 2020, operating hours: 2,980 h, Equipment: all wheel drive, MAKE: DOOSAN TYPE: DX140LCR-5 YEAR: 2020 CE MARKED: YES OPERATING HOURS: 2980 HOURS TIRES/UNDERCARRIAGE: 70% POWER: 86KW ENGINE: PERKINS 1104F WEIGHT: 15400 KG OPTIONS: BLADE ROADLINER PADS HYDR. QUICK HITCH BUCKET HAMMER HYDRAULICS SORTING FUNCTION CENTRAL LUBRICATION SYSTEM AIR CONDITIONING CAMERA LIGHTING BLADE EXCELLENT CONDITION, LIKE NEW KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN Ijdpfx Ajzlv I Sea Ejti THE NETHERLANDS VAT ID: NL864089764B01

Condition: used, Year of construction: 2013, operating hours: 9,980 h, Equipment: all wheel drive, MAKE: KOMATSU TYPE: PC138US-10 YEAR: 2013 CE MARKED: YES OPERATING HOURS: 9940 HOURS TYRES/UNDERCARRIAGE: 80% POWER: 73KW ENGINE: KOMATSU SAA4D95LE-6 WEIGHT: 14420 KG OPTIONS: 14,420 KG OPERATING WEIGHT Iedpfx Aajzlv Nps Ejti HYDRAULIC QUICK HITCH BUCKET AIR CONDITIONING BLADE HAMMER HYDRAULIC LINES SORTING FUNCTION FULLY EQUIPPED KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN THE NETHERLANDS VAT ID: NL864089764B01

Condition: excellent (used), functionality: fully functional, power: 85 kW (115.57 HP), Year of construction: 2021, operating hours: 1,033 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, Schaeff TC125 / Adjustable Boom / 1,033 hrs / Power-Tilt Rotator • Manufacturer: Schaeff Terex • Model: TC 125 Isdpfxjywlhus Aa Ejti • Year: 2021 • Operating hours: 1,033 hrs • Power: 85 kW / 115 hp • Engine: Deutz TD 3.6 L4 • Dozer blade • High and low speed settings • Reversing camera • Power-Tilt • Air conditioning • Radio • Central lubrication system • Swing arm • Hydraulic lines for hammer, grab, and shear • Track undercarriage 90% • Digging bucket: Lenhoff universal bucket CB10M/SW08 • Total weight: 12,100 kg • Quick coupler • German machine • Immediately ready for use • Top condition, like new • This offer is non-binding and subject to prior sale. - Subject to prior sale, - Errors and/or typographical mistakes excepted. - Sale subject to our terms and conditions.

Condition: excellent (used), Year of construction: 1991, double spiral Make: Chain link fance machine WAFIOS Type: DF3 Constr. year: 1991 wire diameter: 1,5-2,8 mm mesh width: 20-70 mm working width: 2000 mm Iedszizahopfx Aa Eeti capacity – m²/hour: 170 Location: Europe

Condition: used, New spare parts for DEMAG DKUN5 - DKUN 5 (KMK71) Spare parts for the repair of a DEMAG crane, chain hoist Suitable for DEMAG chain hoist DKUN5 Scope of delivery: 1x Shaft-coupling-KMK set 1x Stand set KMK / P = 12600633 1x Runner set KM71 B2 = 12845833 1x Fan set KM71 = 12882233 1x Driving dog KM71 = 12876033 1x Thrust ring set KM71 = 12885233 1x Bearing shield set KMP 71 BS = 12861433 Itedozinw Topfx Aa Eei 1x Chain guide set LDKUN D5 = 83628033 1x Small parts set KMK 71 B2 = 12878533 Weight 11.5 kg G

Condition: excellent (used), Year of construction: 1982, machine/vehicle number: EM518, Technical specifications: 1 Vetter TYPE B Demag column-mounted slewing crane, capacity 2500 KG, with wire rope hoist Useful load at full outreach: 2500 KG / 2.5 tons Height: approx. 6.65 m Outreach of jib: approx. 5.2 m Outreach: approx. 11.5 m !!! Hook height: approx. 4.3 m Total weight: approx. 5000 kg Column diameter: approx. 100 cm! With steel wire rope hoist, capacity 2500 kg Slewing range: 360° Itjdjzk Tngspfx Aa Eei Crane is dismantled and available immediately Item location: 75053 Gondelsheim Other cranes are available, with load capacities of 80-5000 kg, please inquire. See images. Shipping via freight forwarder or collection by appointment only.

Condition: used, Year of construction: 1979, machine/vehicle number: Res BS, Demag PK2 Chain Hoist Crane Lifting Unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t rated load / lifting capacity – single fall – 500.- Itodjvzkyljpfx Aa Eoi 500kg / 0.5t rated load / lifting capacity – double fall – 600.- With 2 lifting speeds, lifting height approx. 3-4m Complete with pendant control and load hook Total weight approx. 40kg, 380V 50Hz connection Top condition, fully functional. Not a worn or used device! Connect and start operating. Comes from ongoing operations Item location: 75053 Gondelsheim See pictures

Condition: used, power: 140 kW (190.35 HP), color: yellow, overall weight: 30,700 kg, Year of construction: 2019, operating hours: 5,964 h, Equipment: additional headlights, adjustable boom, cabin, gripper hydraulics, Steel chains Itsdpjzk H Dbefx Aa Eei Quick-release mechanism 1 seat Errors and omissions excepted.