Used Chain Grinder for sale (3,567)

Condition: used, Graver grinder PARPAS type AU make no. 854/36 year of construction 1971 grinding wheel diameter 100 mm grinding spindle speed approx. 3500 rpm. Codpsdzp T Tefx Aa Eopw motor power approx. 0,55 kW Mains connection 380 Volt, 50 Hz - collet chuck (system DECKEL with S20x2) - collet chuck Ø 15,0 mm - Diamond grinding wheel dresser for grinding wheel end face Space requirement L x W x H 700 x 350 x 450 mm weight approx. 80 kg good condition

Condition: used, Drill grinding machine GÜHRING type SS 15 make no. 909 year of construction approx. 1977 drill diameter max. 40 mm grinding wheel diameter right 300 mm grinding wheel diameter left 250 mm grinding wheel width 40 mm grinding spindle speed approx. 2800 rpm motor power approx. 2,2 kW Mains connection 380 Volt, 50 Hz - center angle infinitely variable - Pointing device - gear motor for height oscillation in front of the cup wheel - diamond dressing holder - various drill bit holders - coolant device space requirement L x W x H 1200 x 950 x 1550 mm Cpsdpfx Aedzp Tboa Eow weight approx. 1150 kg

Condition: used, Year of construction: 2019, operating hours: 11,100 h, CAT 336 tracked excavator Codpfx Aajynrgqs Espw The machine has only 11,000 operating hours and is in good condition Operating weight approx. 36,800 kg Air conditioning

Condition: ready for operation (used), Grinding wheel diameter: 300 mm Grinding wheel width: 40 mm Grinding wheel speed: 1400 rpm Drive motor: 400 V, approx. 1.5 kW Weight: kg Cpjdpfex E Rx Ujx Aa Esw Required space: 700 x 400 x 1100 mm

Condition: ready for operation (used), Year of construction: 2019, Grinding wheel diameter: 200 mm Cpjdpsx E Rw Defx Aa Eow Grinding wheel width: 32 mm Grinding wheel speed: 2950 rpm Drive motor: 400 V, 0.9 kW Weight approx.: 34 kg Required space: 500 x 250 x 1150 mm

Condition: ready for operation (used), Year of construction: 2014, Grinding wheel diameter: 200 mm Grinding wheel width: 32 mm Grinding wheel speed: 2950 rpm Drive motor: 400 V, 0.9 kW Weight: 34 kg Cpsdpfxsx E Rxhs Aa Eew Required space: 500 x 250 x 1120 mm

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Csdpfoviwdmjx Aa Eopw Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, CNC tool grinding machine Walter Helitronic Power 400 - Year of manufacture: 2019 - Fanuc control with Toolstudio Cpsdpfsylx Ipex Aa Eow - 4-position wheel changer - Eco Loader Accessories: - Grinding wheel arbors

Condition: refurbished (used), Year of construction: 2005, Equipment of the retrofit machine can still be freely selected. Suitable for the production of profile plates, milling tools, dental tools, circular knives and blades, styluses (also CBN) and other tools / components Control: Siemens 840 D X-axis 540 mm Y-axis 300 mm Codpfxsilpwxo Aa Espw Z-axis 300 mm A-axis (dividing head) 360° C-axis (rotary table) 255° Grinding spindle: HSK50 Tool changer: 4-way Coolant system: Turbo Separator Extraction: LTA CO2 extinguishing system Other accessories: Available from the factory Automation: Available Software: Available to customer specifications Pre-acceptance at the manufacturer's factory Commissioning, training and final acceptance at the customer's site Financing possible!

Condition: refurbished (used), Year of construction: 2007, Completely overhauled Haas Multigrind HT grinding machine available from Q2 / 2026. Cpedpfx Aex Tr H Noa Eow Designed for resharpening hobbing cutters, worm wheel cutters, cutting rotors, notching cutters, industrial knives, circular knives, shaper wheels, skiving tools, deep hole drills, and other workpieces/components. Control: Siemens 840 D X-axis: 650 mm Y-axis: 400 mm Z-axis: 280 mm A-axis (indexing device): 360° SK50 C-axis (rotary table): 270° X3-axis electrically operated with tailstock Grinding spindle: HSK80 Dressing unit Tool changer: 10-position magazine disc Coolant system: Turbo Separator Extraction unit: LTA CO2 extinguishing system Additional accessories available ex works Custom software solutions available on request Pre-acceptance at factory and commissioning, training, and final acceptance at customer site Financing/leasing options available Modification requests possible

Condition: reconditioned (used), operating hours: 2,452 h, functionality: fully functional, center height: 175 mm, workpiece weight (max.): 80 kg, type of input current: three-phase, spindle speed (max.): 1,500 rpm, spindle speed (min.): 1 rpm, feed length X-axis: 285 mm, feed length Z-axis: 800 mm, overall weight: 4,000 kg, year of last overhaul: 2026, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 10 m/min, input voltage: 400 V, CNC Cylindrical grinder STUDER S33 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC 21i-TB Software installed: StuderGrind Centre distance: 650 [mm] Height of centers: 175 Stroke X axis: 285 [mm] Min. Stroke speed X axis: 0.001 [mm/min] Max. Stroke speed X axis: 5000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 800 [mm] Min. Stroke speed Z axis: 0.001 [mm/min] Max. Stroke speed Z axis: 10000 [mm/min] Resolution Z axis: 0.0001 [mm] B axis swivelling stroke: -15 [°] / +195 [°] B axis indexing precision: Hirth 1 [°] Workpiece spindle nose: MT5 Workpiece spindle min. speed: 1 [rpm] Workpiece spindle max. speed: 1500 [rpm] Max. part weight in part holder headstock between centres: 80 [Kg] Type of attachment tailstock: MT3 Tailstock quill stroke: 35 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: +/- 40 [mm] Working hours: 2452 [h] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 4000 [Kg] INCLUDED EQUIPMENT: x1 internal grinding spindle type 102560B – speed: 60,000 [rpm] x9 internal grinding wheel arbors x1 hydraulic swiveling dressing attachment x1 fixed dressing unit mounted on the table Cjdpfx Aaeylvqhj Espw x1 rotating wheel dressing unit (electrical) x1 4-jaw chuck Ø170 [mm] - MT5 x3 sets of hard jaws x11 full centres x4 half-centres x1 RÖHM blunt centre x1 2-point steady rest x62 internal grinding wheels x10 external grinding wheels x7 service keys x1 pneumatic tailstock lift x1 pneumatic upper-table lift x1 longitudinal slide with rotary table - swiveling up to 8.5 [°] x1 automatic B-axis turret wheelhead – Hirth gearing 1 [°] x1 C-axis for thread and form grinding x1 workpiece probe MOVOMATIC C25 x1 contact control device DITTEL SENSITRON 6 x1 semi-automatic wheel balancing device MPM type BMT100M x1 paper filtration unit ARO TECHNOLOGIES type 5491.246A01 x1 mist extraction unit AIR-FRESH SERVICE type FMN-V12 x1 foot pedal x1 electrical cabinet air conditioner x4 external grinding wheel flanges x1 set of lifting equipment x1 axis bracket (for transportation of the machine) x1 set of operating manuals (French, English, and German) Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Similar machine to Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm, Studer. Also see: surface grinders, lathes, machining centers, milling machines.

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, Semi-automatic drill sharpening machine, for sale due to model change! Cjdovirg Nopfx Aa Eopw Grinding range:3-40mm

Condition: ready for operation (used), Arm lifting capacity 125 kg, length 310 cm Chain hoist with remote control, lifting capacity 125 kg, year 2006 Suction cup, lifting capacity 250 kg, year 2009 Cedpfx Aasynitue Eopw Foot length 300 cm

Year of construction: 2007, condition: excellent (used), machine/vehicle number: WD700/10, Technical data: Cjdpfov Hv Edjx Aa Espw 1 Vetter / Demag pillar jib crane NL 500KG with Demag chain hoist Type AS5-4.0 Payload at full reach 500 KG / 0.5 tonne payload Height: approx. 3.75m UK boom: approx. 3.42m Reach: approx. 3.5m Hook height: approx. 2.85m Total weight approx. 800Kg including dowel plate 1050mm with Demag chain hoist 500Kg (older) Swivel range 270°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Condition: used, Year of construction: 1988, operating hours: 14,890 h, Equipment: all wheel drive, Manufacturer: EDER Hydraulikbagger GmbH, 8359 Eging Model: M 835 Year of manufacture: 1988 Chassis no.: 61588 Permissible total weight: 21,000 kg Front axle load capacity: 12,000 kg Rear axle load capacity: 12,000 kg Made in Germany Including grab, the machine runs well. Cpedeynfkpepfx Aa Eow

Condition: excellent (used), Carbide saw grinder VOLLMER model Finimat 3-600 Cjdpfx Asylc Ugea Espw

Condition: excellent (used), Carbide saw grinder VOLLMER model Finimat 3-800 Codpfxoylc T Nj Aa Ejpw

Condition: like new (used), Chain feed table, used for feeding and linear transportation of roll goods or log goods. Cpedpfetw Sm Nex Aa Esw Forward/reverse run (reversing circuit) integrated, end positions are queried via roller limit switches. Feeding length: 2200mm Feeding height: 950mm (adjustable) Drive power: 0.18kW (Getriebebau Nord) Condition: slight paint wear, otherwise as good as new

Condition: used, Year of construction: 2004, functionality: fully functional, Grinding program "Step drill 7" Touch probe program for automatic measurement of the probe and a warm-up program. Cpedoydaqiepfx Aa Ejw Dismantling and loading by the seller. Transport by the buyer. Sale only within the EU.

Condition: used, Year of construction: 2022, operating hours: 8 h, For sale is an almost new 315 crawler excavator (year of manufacture 12/2022). The machine has only 8 operating hours and was used exclusively as a display unit. The excavator is in like-new, virtually unused condition. Csdpfxeym I Eys Aa Ejpw

Condition: used, Year of construction: 2021, operating hours: 11,213 h, Internal vehicle no.: MK300022 German vehicle Csdpjym H R Iofx Aa Espw Available immediately at our yard in Kaufungen - Kassel For more information, contact: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) HITACHI ZX210LC-6 crawler excavator Year of manufacture: 2021 11,213 hours 23.1 tonnes Subject to errors and prior sale We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, total length: 1,059 mm, overall weight: 190 kg, total width: 915 mm, type of input current: three-phase, total height: 535 mm, input voltage: 400 V, DGUV certified until: 03/2027, NEW Loading Oven Schaubackofen NEW Salva kwik-co KX-5 The latest generation of modern oven series with COOL-Touch and LOW-E Easy control ECO Energy Saving System Rounded baking chamber For 5 trays, 600x400 mm DGUV V3 tested exclusively by us Connection: 400V, 16A-CEE plug Dimensions: 915 x 1059 x 535 mm (W x D x H) Brand new unit, SAB tested Cpedpfx Aasx Dypdo Eew with warranty Options: Water filter Baking trays Service package Maintenance contract Delivery service Training & commissioning

Condition: excellent (used), Catalogue number 7670 TECHNICAL DATA - Track width: 340 mm - Roller width: 400 mm - Max. blade diameter for multi-blade saw: 350 mm - Blade bore diameter: 80 mm - Max. cutting height for edger: 100 mm - Max. cutting height for multi-blade saw: 120 mm - Table width with clearance: 900 mm - Table length: 1780 mm Cpjdpfjyk E Hpjx Aa Ejw - From above: - Kickback fingers - Pressure roller, sliding, metal - Kickback fingers - Pressure roller, sliding - Saw shaft with blades - Pressure roller, sliding - Sliding pressure shaft, metal - From below: - Guide bar - Kickback fingers - Track - Central lubrication - Stepless feed speed adjustment - Electric lifting of saw shaft 0.75 kW + body 1.1 kW - Feed motor 1.5 kW - Main motor 22 kW - Floating saw movement 0.55 kW - Lasers (not working, require inspection) - Extraction port diameter: 210 mm - Overall dimensions (L/W/H): 2200 x 1450 x 2000 mm - Weight: 1925 kg ADVANTAGES – Made in Germany – Shaft with floating blade for edging – Additional sleeve for multi-blade saw included – Used multi-blade saw, in very good condition Net price: 58,900 PLN Net price: 14,030 EUR (based on exchange rate 4.2 EUR) (Prices may change with larger fluctuations)

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) Cpodpfx Aaexablxs Eew - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: good (used), Year of construction: 2011, Electric chain hoist, crane, overhead crane, assembly crane -Manufacturer: Yale, electric chain hoist Cedpjx E Sq Eefx Aa Eepw -Type CPE 75-1.6 Load capacity 7500 kg -Main stroke: 1.6 m/min -Chain length: 9 m -Transport dimensions: 1200/800/H520 mm -Weight: 235 kg