Used Centerless Belt Grinder for sale (10,031)

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Nwodpfew D Ev Eex Ahvsc Ready to ship worldwide More pictures and videos available upon request

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 23146001, The machine was acquired in 2024 and has seen very little use. The original price was €132,000 net. The technical data is sourced from the manufacturer's website. The seller cannot guarantee its accuracy. TECHNICAL DETAILS Capacity up to: 150 m³/h Chipping disc: 1,450 mm (diameter) x 78 mm Disc speed: 700 rpm Number of cutting blades: 4 Number of counter blades: 4 Maximum chip length: 36 mm Feed speed: 0.7 m/s MACHINE DETAILS Control system: Greentec Control System 3.0 with touchscreen Three-point hitch: Standard Starting aid: Hydraulic Drive: PTO shaft 1000/1000E Required power: 200 – 450 HP Weight: 3,100 kg Speed: 1000 rpm Nwedpeyg D Svefx Ahvsc Note: This machine is a special version without a hopper.

Condition: used, length 5650 mm Nwsdpoynntyjfx Ahvoc height over floor 400 mm width 300 mm total power requirement 2,9 kW Reinhardt conveyor belt type DB300 A for the efficient transport of wood, firewood, chips, and workpieces in woodworking. The robust construction enables a reliable and continuous conveying process in production lines, firewood production, and workshops.

Condition: new, Year of construction: 2024, neu 2024 5546 prompt, Zwischenverkauf v Polen 1690 € 1 150 mm 2.000 x 150 mm 200 x 150 x 42 ø mm 605 mm 3000 1/min 3.5 kW 1025 mm 600 mm 1000 mm 100 kg Industrial belt grinder with following features: Nwsdpfx Ahjynmw Dsvjc - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Condition: new, Year of construction: 2024, neu 2024 5544 prompt, Zwischenverkauf v Polen 1340 € 1 75 mm 2.000 x 75 mm 200 x 75 x 42 ø mm 605 mm 3000 1/min 3 kW 1025 mm 500 mm Nwedpfx Aeynmwwshvsc 1000 mm 76 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Condition: good (used), Code: 0312 Brand: TAGLIABUE - COSTA LEVIGATRICI Njdpfx Aoynk Dnehvowc Model: TAG 11 - Norme CE Automatic calibrating sanding machine with 2 belts and movable head for furniture, carpentry, custom-made furnishings, panels, solid wood, tables, composite materials and various - CE Standard Steel enblock Conveyor plane provided with a thick rectified steel structure Sanding belt motors placed inside the base Rubber conveyor belts structured in 3 cloths and sectionated in rings for constant centering on the plane Base with thickness sheet up to 30 mm Movable head using big lifting columns Technical data: Working width 1350 mm Working thickness 3-130 mm Fixed working surface height 900 mm Feed speed from 5 to 30 mt/min Belt dimensions 1400 x 2620 mm Working thickness display Composition: 1° Group Steel Calibrating Roller diameter 280 2° Group Rubber Sanding Roller diameter 300 Cleaning brush - Motor 2 Hp - Suction inlet diameter 160 Total power 57 kW Compressed air 7-8 bar Overall dimensions mm 2100 x 2300 x 2400 h Weight kg 5500

Condition: used, Year of construction: 2001, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Nwjdpfjxzi S Nsx Ahvec Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Location: Supplier

Condition: used, Kündig Topiq-1100 Swiss quality product Constant table machine / automatic head adjustment Wide-belt calibrating and fine sanding machine Combination unit with contact roller and sanding pad unit featuring electronically controlled segmented sanding shoe Belt drive motor power approx. 11 kW Contact roller height steplessly adjustable according to grit scale Working width 1100 mm Feed speed 3 - 15 m/min, infinitely adjustable Automatic workpiece thickness adjustment ENORMATIC quick setup Nwedpfsyngxhex Ahvjc Program selection via SmartSelect control Machine is WORKSHOP-REFURBISHED and in VERY GOOD CONDITION Available ex-stock Lieboch

Condition: used, The BIESSE SAND REGAL 1350 is an industrial wide belt sander designed for calibration and fine sanding of flat components in the furniture and panel production industries. The REGAL series represents a robust production solution suitable for medium to high production volumes. Nsdpfx Ahjynb Rfovowc The machine features a modular design, allowing for a combination of calibration and finishing operations in a single pass, which significantly increases productivity.

Condition: used, Automatic Grinder Manufacturer: Seydelmann Model: AV 250 Completely made of stainless steel Two-speed working worm, three-speed feeding worm Standard cutting set Electric power: 80kW Voltage: 400V 50Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters Nwjdpfx Asukg Dnjhvsc

Condition: used, Viet Target 211 A Wide Belt Sander 1st unit: roller unit 2nd unit: sanding pad unit Working width: 1100 mm Working height: 4 – 160 mm 2 feed speeds Main motor: 11 kW Additional roller table at infeed and outfeed Year of manufacture: 1995 Machine is IN WORKING ORDER and in GOOD CONDITION Available ex-site Njdpfxoym T Igj Ahvewc

Condition: used, Coffee Grinder Manufacturer: Schärf MAZZER Model: xmill-Protect Precision grinder with conical solid grinding discs Slow rotation for optimal grinding quality Robust stainless steel housing Power supply: 220 – 230 V / 50 Hz / 900 W Nodpfoxzp Scjx Ahvswc (Operation via standard household power) Safety markings: GS and CE Weight: 25 kg Dimensions (W/H/D) approx.: 285 x 820 x 400 mm Ideal for professional use in the catering industry.

Condition: used, Year of construction: 1987, Wide belt sander Manufacturer: Samco Model: EG Nwodpfx Aexdnrgshvoc Year of manufacture: 1987 Sanding length: 3,000 mm Including spare belts ä24226

Condition: ready for operation (used), total width: 4,260 mm, total length: 9,850 mm, empty load weight: 62,000 kg, forward motion of grinding wheel: 2 hp - 1150 rpm rotational motion of wheel: 40 hp - 1450/575 rpm head: 15 hp - 300/1200 rpm transmotion: 3/5 hp - 300/1800 rpm Center distance: 4300 mm Max dia of the workpiece: 1140 mm Nodpsym Em Usfx Ahvswc Center height: 570 mm Motorpower: 40 hp

Condition: ready for operation (used), Cincinnati Grinder Ø 310 x 1250 mm Center distance: 1250 mm Max dia of the workpiece: Ø 310 mm Nwjdpfxoym Enfo Ahvjc

Condition: excellent (used), Year of construction: 2007, operating hours: 592 h, Calibration and fine sanding automatic machine, wide belt sander with electronic segmented sanding pad and lacquer sanding capability A video of the machine in operation can be provided upon request. Ideal sanding machine for interior finishing workshops, also suitable for intermediate lacquer sanding. Single-belt machine with combination unit and electronic segmented pressure beam; edge segments can be switched on and off. Segment width of the pressure beam: 35 mm Contact roller can be pneumatically adjusted, low wear thanks to grooved steel roller Abrasive grain compensation Drive motor 7.5 kW with automatic motor brake, infinitely variable belt speed, frequency controlled from 2 to 18 m/s Feed belt can be continuously adjusted via frequency inverter from 2.5 to 13 m/min Pneumatic, workpiece-controlled belt blow-off device Cleaning brush at the exit Constant working height of 900 mm by adjusting the machine upper section, allowing integration into sanding lines Feed belt still very grippy and in excellent condition Maximum sanding width approx. 1090 mm Workpiece height approx. 3 to 150 mm Common abrasive belt size: 1120 x 1900 mm 3 rubberized pressure rollers Infeed roller table and foldable outfeed table Prepared for vacuum blower. The conveyor is perforated and a plug for an optional blower is available. Alternatively, the conveyor can also be connected to the extraction system. Extraction connections: 1 x 180 mm, 1 x 140 mm, and 2 x 100 mm Nedpfoym Du Rjx Ahvewc Terminal control with 50 programmable sanding programs for automated machine operation. Parameters: belt speed, feed speed, workpiece height, pressure beam engagement points front and rear, edge segments, belt blast nozzle, optional vacuum blower, pneumatic setting of the calibration roller. CE mark Operating manual without the power cable shown Original paint, only partial touch-ups Approx. 592 operating hours, i.e., around 40 minutes per week. Dimensions approx. 1800 (with table 2600) x 1800 x 2150 mm (LxWxH). Weight approx. 2200 kg. The machine can be demonstrated on our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this supplier."

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 815, spindle speed (max.): 8,000 rpm, overall weight: 600 kg, workpiece length between centers: 336 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Universal indexing head center height: 170 mm Tailstock center height: 120 mm (with intermediate support: 170 mm) Maximum workpiece length between centers: 336 mm Workpiece diameter with cantilevered mounting: approx. 600 mm Maximum tip length: 950 mm Nwedpfjym Alhsx Ahvec Internal taper of the dividing spindle: Morse 4 / Unified 40 T-slots: 12 mm (machine base) T-slots: 8 mm (additional elements) Grinding stroke: 190 mm Transverse movement of tool holder: 100 mm Vertical movement of grinding head: 325 mm Tool holder movement range: 230 mm Indexing device on tool slide: 330 mm Grinding head mount rotation: 360° Tool holder rotation: 360° Grinding head rotation: 360° Universal attachment rotation: 360° Three-phase motor: 0.7 / 0.85 kW DC motor: 1.3 kW Spindle speed: 4,000 / 8,000 rpm Infinitely variable DC speed: 2,000–10,000 rpm MACHINE DETAILS Operating voltage: 380 V Frequency: 50–60 Hz Rated current: 14 A Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,900 mm Weight: 600 kg EQUIPMENT Two-axis digital display Extensive range of accessories suited to the machine External Reference: Segato

Condition: used, Year of construction: 2000, overall weight: 60 kg, terms of delivery: FCA Pegnitz delivery time: on request Nwodpex Iwc Ejfx Ahvoc terms of payment: 100% prior to delivery

Condition: excellent (used), Catalogue number 7861 TECHNICAL DATA - Workpiece length: 2500 mm - Workpiece width: 800 mm - Main motor approx. 4 kW - Grinding belt width: 170 mm - 2 speed settings - Extraction port diameter: 2x120 mm - Overall dimensions (L/W/H): 3640x1220x1500 mm - Weight approx. 800 kg ADVANTAGES – Manufactured in Poland – DTR documentation included – Used sander, in very good condition Net price: 6900 PLN Net price: 1640 EUR at an exchange rate of 4.2 PLN/EUR (Prices may vary with significant exchange rate fluctuations) Nwjdpex U Tnqsfx Ahvec

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Grinding belt width: 1370 mm Grinding belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed speed: 2.5 - 13 m/min (infinitely adjustable) Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Storage location: Nattheim Nwodpfx Ajymmxrshvjc

Condition: used, total height: 1,700 mm, total length: 1,540 mm, total width: 1,280 mm, Empty weight: 1.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs]: 3 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 320 - Table width [mm]: 760 - Table depth [mm]: 210 - Magnet width [mm]: 460 - Magnet depth [mm]: 250 - Max. grinding wheel diameter [mm]: 210 - Max. grinding wheel thickness [mm]: 30 - Options: Dresser - Transport dimensions: 1540mm x 1280mm x 1700mm (l x w x h) Nsdpfjyml Apsx Ahvowc - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Technical Main Data - Grinding width: 1,350 mm - Working height: 900 mm (constant) - Workpiece thickness: max. 150 mm - Abrasive belt width: 1,370 mm Nwsdpfx Aexmwn Ajhvec - Segment grinding shoe - Weight: approx. 3,000 kg Drives 1st unit: 15–18.5 kW, belt speed 18 m/s 2nd unit: 11–15 kW, belt speed 18 m/s Contact roller diameter: 140 mm (combi unit) Feed: - Feed belt system: length 3,400 mm, width 1,350 mm - Feed drive: 0.7/0.9 kW (2 speeds) - Feed speed: infinitely variable, 2.5–13 m/min Extraction - Air velocity: min. 20 m/s - Machine resistance: approx. 800 Pa Compressed Air: - Operating pressure: 6–8 bar - Air consumption: approx. 28 l/min

Condition: good (used), V-belt pulley, belt pulley, double wheel pulley, variable pitch roller, V-belt pulley with variable pitch -V-belt pulley: Roller V-belt pulley with variable pitch -Adjustment range: 17 - 35 mm -Hole: Ø 28 mm -Dimensions: Ø153 x 72 mm -Weight: 5.1 kg Nedpfx Ahjymb Emjvswc

Condition: ready for operation (used), empty load weight: 3,300 kg, additional equipment features: Diamant tools, + afzuiging Nwodpfexp Skdjx Ahvsc + koelmelk groep Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Dimensions magnetic table: 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Cooling system: yes

Condition: used, Year of construction: 2013, operating hours: 26,721 h, Center height: 155 mm Max. tool diameter: 200 mm Max. tool length: 270 mm Travels X / Y / Z: 530 / 400 / 320 mm Feed rates: 0 – 15 m/min Table size: 245 x 140 mm B-axis: Swivel range: 240° Swivel speed: 180°/s Grinding wheel interface: HSK-E50 Grinding spindle: Speed: 2,000 – 12,000 rpm Power: 16 kW Liquid-cooled A-axis: Swivel range: ± 15 minutes Max. speed: 600 rpm Njdpfxjyma I Hj Ahvswc Spindle bore: 32 mm Axis drives: X / Y: 2 kW Z: 3 kW B: 2 kW A: 3 kW Grinding wheel changer: 4 positions Three stations on the table (max. diameter 125 mm) One station on the tool carrier (max. diameter 175 mm) CNC control: NUM AXIUM POWER with PC and software for: - Milling cutters - Form milling cutters - Clamping systems - Drills and step drills - Roundness control - 3D collision control - Zero-point compensation Voltage: 400 V / 50 Hz Operating hours: 23,904 h Spindle hours: 9,846 h Scope of delivery: - RENISHAW 3D measuring probe mounted on grinding head - Dressing unit - Various tools and tool clamping accessories - Coolant and filtering unit GS Industrietechnik RBAFWT113 ND - Coolant filter unit GS Industrietechnik RBAFWT113 ND, year 2013 - Coolant filter unit BÜCHELE 511006