Used Castotig 2000 for sale (6,848)

Condition: new, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Bdodpfxewgbuie Aa Deb Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Bdedjy Enc Dspfx Aa Dsb Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 600 h, functionality: fully functional, machine/vehicle number: DB 5044Q01A, conveying length: 2,000 mm, working width: 1,300 mm, Powered roller conveyor with UV lamps for preheating, approximately 600 operating hours, in excellent condition. Bedpfey Emldox Aa Dodb

Year of construction: 2000, operating hours: 1 h, condition: used, Transmission: Automatic Power: 1 kW (1 HP) Empty weight: 2.500 kg Bodpeyuvfdefx Aa Dsdb Please contact Emal Jaweed for more information

Condition: good (used), Round bending machine with hand crank operation, max. working width 2 m, old, stable and heavy cast iron machine. Bedpfx Asyf Uahea Djdb

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine Bodpfeydi A Iox Aa Dedb -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Year of construction: 2013, condition: ready for operation (used), travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, controller manufacturer: HEIDENHAIN, overall weight: 6,000 kg, total width: 600 mm, total height: 2,000 mm, spindle motor power: 35,000 W, product length (max.): 1,400 mm, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis Eumach LBM-2000 was manufactured in 2013. It features a generous table dimension of 2100 x 1600 mm and impressive axes strokes of 2200 x 1750 x 650 mm. The machine is equipped with a HEIDENHAIN controller and offers a maximum rotation speed of 18000 rpm. If you are looking to get high-quality milling capabilities, consider the Eumach LBM-2000 bed type milling machine we have for sale. Contact us for further details. Bsdpfoy Amngex Aa Djdb • Table Dimensions (X/Y): 2100 x 1600 mm • Forward Speed: 10000 mm/min

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, Technical Data Clamping Unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Minimum mold height: 400 mm Maximum daylight: 900 mm Opening stroke: 500 mm Rotary table diameter: 2000 mm Bjdpfx Aaey Ak Nuj Dedb Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical Data Injection Unit Screw diameter: 50 mm Shot volume: 392 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 880 Nm Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions LxWxH: 4.11 m x 2.65 m x 4.81 m Total weight: 22,000 kg Equipment Display text German Display text English CEE socket 16A Hydraulic core pull 4x Air valve 1x Machine with water battery Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: new, Year of construction: 2026, The PS12E-2000 format saw is a professional carpentry tool that stands out for its versatility and advanced features. This circular saw has been designed for a wide variety of woodworking tasks, offering both precision cutting of narrow and thin boards and handling thick wood tops with a maximum thickness of up to 100mm. The main features of the saw, the PS12E-2000 wood panel saw: Two cutting discs: the saw is equipped with two cutting discs - a main disc and an undercutting disc, providing versatile cutting capabilities for different types of wood materials. MDF undercutter: An additional undercutter has been fitted to the machine, allowing precise cutting of MDF and other wood materials with a similar structure. Bjdpfx Asvuf Tmea Djdb Blade height adjustment: offers infinitely variable height adjustment of the cutting saw up to 100 mm, allowing it to be adapted to different material thicknesses. Disc inclination: The cutting disc can be tilted from 90° to 45° Solid guideways: The machine has solid guideways with scales, both longitudinal (steel) and angular Additional format table: the large bearing-mounted format table with support is one of the main advantages of this saw. This makes it possible to process large format boards and materials with a large surface area. Sawdust discharge system: The woodworking machine is equipped with a sawdust discharge pipe system, which helps keep the work area clean. Easy disc change: The replacement process is quick and efficient, allowing you to work efficiently. Side guide with graduation: fitted with a side guide with accurate graduation, which facilitates serial cuts of the same length. Saw blade guard: the saw has a saw blade guard that can additionally be connected to the extraction system, which guarantees safety and cleanliness in the working area. Technical data: Length of the format table [mm] 2000 Cutting width right side [mm] 1260 Swing of saw blade [°] 45 Cutting height at 45° [mm] 80 Cutting height when using circular saw blade 315 90° [mm] 100 Cutting height with saw blade set to 300 90° [mm] 95 Maximum dimension of saw blade [mm] 315 x 30 Maximum dimension of undercut [mm] 100 x 20 RPM of main saw [U/min] 4500 Bowl speed [U/min] 5800 Motor power S1/S6 3.8 kW / 6.1 hp Power supply 3 phases, 400 V Weight [kg] 275 Warranty [months] 12

Condition: used, tire size: 13.6-28 / 8mm, total width: 25,500 mm, front tire size: 13.6-28 / 8mm,

Condition: excellent (used), mileage: 58,000 km, power: 170 kW (231.14 HP), first registration: 06/1998, fuel type: diesel, axle configuration: 4x2, fuel: diesel, gearing type: automatic, emission class: euro3, suspension: air, total length: 9,100 mm, total width: 2,500 mm, total height: 3,400 mm, Year of construction: 1998, Equipment: ABS, electric window regulation, power assisted steering, = Additional Options and Accessories = - 2-pedal control - Air suspension - Radio/cassette player - Rotating beacon - Hose assemblies - Central lubrication = Remarks = 4x2 Bronto Skylift F 32 MDT F2000 (32 m) 4-point stabilizers Year of manufacture: 1998 Only 2,181 operating hours! 630 rpm Rotatable work basket Max. 270 kg / 3 persons Bdsdpfxsy Efwro Aa Dsb Only 58,000 km In very good condition! Ready for immediate use. = Further Information = Front axle: Steered; Suspension: Air suspension Unladen weight: 16,510 kg Payload: 1,490 kg Gross vehicle weight: 18,000 kg CE marking: yes Technical condition: very good Visual condition: very good

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, We are selling this lathe. It is connected and can be tested under power. The machine comes with accessories. Turning diameter: 2,000 mm. Turning length: 10,000 mm. Maximum workpiece weight: 60,000 kg. Machining diameter: 2,000 mm. A video of the machine can be sent via WhatsApp. Bedpexwmbmsfx Aa Dodb

Condition: excellent (used), Year of construction: 1999, Technical specifications: • Manufacturer: Hebrock GmbH (Made in Germany) • Model: EURO 2000 • Year of manufacture: 1999 • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Bdjdpfx Aaey Ahtwe Deb Working range: • Workpiece thickness: approx. 10 – 50 mm • Edge thickness: approx. 0.5 – 3 mm • Minimum workpiece length: approx. 250 mm • Minimum workpiece width: approx. 70 mm • Feed rate: approx. 10 m/min • Compressed air connection required (approx. 6–7 bar) Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1988, functionality: unexamined, CLEARANCE SALE Complete Printing Screen Engraving equipment : LASER ENGRAVING FOR ROTARRY PRINTING SCREENS Laser Engraver Make : Stork Type : Laser Engraver STK 2000 YoC : 1988 Major overhauled 2006, after used of only few years, then preserved and stored for future use Screen dia : 64 cm Length : 310 cm Lacquer Coater Make : Stork Type : RSE 3100 / Q4B1/2000 With end ring glueing unit Bdodpfxey D Tgxe Aa Dob Make : Stork Type : SCR-85 With 2 screen drying units, screen washing Professionally marked and dismantled, must be moved immediately

Condition: excellent (used), Year of construction: 2004, Sepamatic Sepa 2000 Separator SEPA 2000 separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Manufacturer: Sepamatic Model: Sepa 2000  Year: 2004 Drum Size: 1,3 mm Power: 7,5kW / 50Hz / 400V Capacity: Up to 4.000 kg/h (depending on product) Machine Dimensions LxWxH: 1.300×1.300×1.700 mm Bdsdpfxjy D H U As Aa Deb Machine Weight: 1.400 kg.

Condition: new, Year of construction: 2024, machine/vehicle number: TRV 2000 Ø700R, High-Speed Optimization in Sawmills: TRV 2000 Makes It Possible! Bdodpfx Asv Ip U Ija Djb Discover TRV 2000, the perfect optimizer for both planed and unplaned boards, designed to deliver high precision, large cutting capacity, and incredible speed. A perfect combination of performance that will revolutionize your sawmill's workflow! Advanced Technology for Outstanding Results The TRV 2000 is equipped with the tried-and-tested CURSAL software, the technological core powering other optimizer series as well. This software is the ideal solution to speed up the production process, optimizing logs by recovering the lateral part, which traditional machines cannot efficiently utilize. It synchronizes perfectly with the multi-blade system to complete the cycle efficiently. With a feed speed of 150 m/min (auto-limited), thanks to the Brushless motor, TRV 2000 eliminates the risk of accumulations, maintaining a continuous flow that integrates seamlessly with the fastest log saws. Uncompromising Precision TRV 2000’s precision is so high that re-sawing after passing through the multi-blade system is unnecessary. Thanks to its innovative technology, it is ideal for optimizing medium-sized, precious woods, making it the perfect choice for those seeking flawless results. Superb Design and Functionality The machine body is equipped with a reliable feed system, enabling movement from right to left through 8 toothed rollers. Pneumatic pressure wheels are specifically designed for unplaned boards, and the in-line optimization capability within the monoblock of the cutting machine allows it to work on curved and twisted boards. Explore Incredible Performance Watch the video on the side and see how TRV 2000 can optimize your production with extraordinary performance. Ideal Applications: Semi-finished wood products for furniture Packaging industry Recovery of boards from the sides of the log Windows, construction, and flooring Laminated, planks, structures TRV 2000: The Ultimate Solution for Modern Sawmills.

Condition: like new (used), Year of construction: 2008, operating hours: 6,200 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 75 mm, Krauss-Maffei KM 420-2000 CX Krauss-Maffei injection molding machine, 420 tons of clamping force. Only 6,000 hours of automatic operation. Year of manufacture 2008. MC5 control. Screw diameter 75 mm. Extras: 8 hot runner zones. 2 cores on fixed platen, 2 cores on moving platen. 1 pneumatic valve on moving platen. The injection molding machine is delivered reconditioned by UK Transitus' expert technical team. We can offer commissioning at our clients' facilities, ensuring operation upon completion of the installation. Technical Details 75mm screw Injection pressure: 1635 bar Bodewq D Efopfx Aa Djdb Shot volume: 1237 cm3 Shot weight: 1126 g Maximum distance between plates: 1400 mm Minimum mold thickness: 380 mm Opening stroke: 1020 mm Distance between columns: 900 x 800 mm Plate dimensions: 1270 x 1230 mm 75mm screw Clamping force: 4200 kN Year of manufacture: 2008 Working hours: 6282

Condition: ready for operation (used), Year of construction: 2007, operating hours: 37,292 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 10,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,500 g, number of axes: 3, This 3-axis HEDELIUS C60 - 2000 vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 620 mm, and Z-axis travel of 520 mm. The machine is equipped with a powerful 18.5 kW spindle and a tool magazine capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the HEDELIUS C60 - 2000 machine we have for sale. Contact us for further details. • Pendulum operation area: 2 × 775 × 620 mm • Main spindle torque: 165 Nm (optional 198 Nm) • Tool holder: HSK A63 • Max tool length: 330 mm Bedpfx Ajyz Sptea Djdb • Max tool diameter: 80 mm • Tool change time: approx. 3.0 s • Chip-to-chip time: approx. 6.0 s • Table: cast iron machine table with 5 T-slots DIN 650-18 • Coolant system: central coolant through spindle • Coolant tank capacity: 780 liters • Filter grade: 25 µm • Filter capacity: 130 l/min • Pump A: 20 bar / 30 l/min • Pump B: 2.5 bar / 150 l/min • Electrical connection: 3 × 400 V, 50 Hz • Total connected load: 20 kVA • Compressed air requirement: minimum 7 bar • Weight: 10500 kg • Machine enclosure: full enclosure with electric roller door • Positioning system: glass scales on X/Y/Z axes • Drive system: digital AC servo motors with ball screws • Programming: Heidenhain plain text and DIN/ISO Additional equipment • Chip conveyor: scraper belt type, discharge height approx. 1150 mm • Extraction system: MultiAir exhaust filter, 1200 m³/h • 3D probe: Renishaw RMP 60 • Repeatability: ±2 µm • Probe stylus length: 50 mm • Probe ball diameter: 6 mm • Vises (optional)

Year of construction: 2023, condition: like new (used), functionality: fully functional, Worktable AT 2000 with beechwood top and drawers Mobile baker's table Beechwood worktop with rear gallery Drawer unit on the left Two storage shelves on the right Stainless steel construction Bdjdpfxexvkxyj Aa Dsb Approximate dimensions: 2000 x 800 x 980 mm (W x D x H) Used machine, cleaned Options: Delivery service New castors/wheels

Condition: excellent (used), Year of construction: 2007, pulling force - max. 9 t max. ram stroke 2000 mm max. workpiece diameter 900 mm Bdjdpsycxlcofx Aa Dsb total power requirement 25 kW weight of the machine ca. 4,2 t

Condition: used, Year of construction: 2006, operating hours: 60,000 h, clamping force: 200 kN, displacement volume: 154 cm³, injection pressure: 2,500 bar, overall weight: 9,500 kg, screw conveyor diameter: 35 mm, terms of delivery: FCA Pegnitz Bodpfx Aaeyzt R So Dodb delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, operating hours: 50,472 h, machine/vehicle number: 12332, Magnetic clamping plate approx. 1,200x600 mm, spindle speed: 8,000 rpm, travel paths X/Y/Z: 2 mm, control: HEIDENHAIN iTNC530, chip conveyor, operator terminal, coolant/lubricant belt filtration system, weight: 10,500 kg, without the hydraulic vise shown, without machining tools. Operating materials are included in the auction scope and must be taken or properly disposed of by the buyer. Bdedpjyztgyjfx Aa Dob

Year of construction: 2007, condition: ready for operation (used), This 3-axis WEINIG / DIMTER Unirex 2000 SPB was manufactured in 2007. It features a total power of 45 kW and operates at a nominal current of 110 A. The machine is part of a comprehensive wood production line, including a drilling and milling center, tenon cutting machine, and longitudinal profiling machine. If you are looking to get high-quality wood processing capabilities, consider the WEINIG / DIMTER Unirex 2000 SPB machine we have for sale. Contact us for further details. • Operating voltage: 3 × 400 V • Frequency: 50 Hz • Control voltage: 230 V • Control circuit voltage: 24 V • Nominal current: 110 A • Main fuse: 125 A • Total power: 45 kW • Electrical diagram: FM 1492 • Production line type: UC-Matic / Hama Bdodpfx Aaoyzqywo Djb • Included machines: • Unirex 2000 SPB drilling and milling center • Unitec 15 tenon cutting machine • Univar 12 longitudinal profiling machine Additional equipment • Cross conveyors and side handling systems (as shown in the pictures)

Condition: used, Year of construction: 1991, functionality: fully functional, travel distance X-axis: 1,830 mm, travel distance Y-axis: 940 mm, travel distance Z-axis: 1,000 mm, We offer this used WAGNER WM 2000 milling machine, year of manufacture 1991. Model: WM 2000 Bdsdpfx Asyub Scsa Dsb Machine serial no.: 9109330 Year of manufacture: 1991 If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), A Happel layer palletizer is available. Products: bags/cartons/bundles/containers/drums, package rotation: 90°/180°/270°, pallet format: 800mm/1200mm, max. pallet height: 1500mm, min. product dimensions X/Y/Z: 150mm/150mm/40mm, max. layer weight: 150kg, max. palletizing capacity: approx. 2500pieces/h. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2500mm, weight: approx. 2500kg. An on-site inspection is possible. Bjdpfx Aasy Dup Ie Djdb