Edge banding machine

HEBROCK Top 2000

Condition: excellent (used), EXCELLENT CONDITION Hebrock edge banding machine Model: Top 2000 Machine description Features - Heating strip for chipboard - Glue container - Pressure roller - Front and rear saws Cjdpfx Ahezadx Aj Eerf - Top and bottom milling station, radius and straight milling - Machine length: 3100 mm - Weight: 600 kg

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife Crjdpfx Asyf I T Ujh Eef

Condition: good (used), Hebrock top 2000 edge bander glue application by roller pneumatic pre-cut guillotine pressure rollers trimming saw for finishing top and bottom milling unit R1-R2 max. workpiece height: 50 mm max. edge thickness in roll: 3 mm feed speed: 10 m/min machine length: 310 cm Crodpjy Rpicofx Ah Eef The machine is well-maintained and in good condition.

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Crsdpfx Aoxnlflsh Esf

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Crsdpfx Aoyg Nu Noh Esf

Condition: like new (used), Year of construction: 2024, For sale: Felder RL-160 clean air extraction unit with a maximum air volume flow of 3,200 m³/h. The extraction unit is currently in use as a demonstration model in our showroom and is therefore in as-new condition. Technical data: - Max. air volume flow: 3,200 m³/h Crsdpfx Asyh Ai Hjh Ejf - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust-tested - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Crodpfxowp Rgme Ah Ejf Technical data: - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 432.08.202.22, drilling depth: 70 mm, input voltage: 400 V, pressure: 8 bar, input frequency: 50 Hz, power: 1.5 kW (2.04 HP), The FD 921 is equipped with 21 drilling spindles set at a 32 mm pitch. Drill bits up to a diameter of 35 mm can be used for drilling dowel holes, line bore holes, and cup hinges. The large cast iron table, side stops, pneumatic workpiece clamps, and ergonomic controls make the FD 921 a premium dowel boring machine. Further technical data: Number of drill heads: 21 (11 right-hand, 10 left-hand rotation) Axis distance between drill heads: 32 mm Max. workpiece size: 850x3000 mm Max. workpiece height: 65 mm Required air pressure: 6-8 bar Accessories: - 11 tool holders with 5 mm right-hand dowel drill bits - 10 tool holders with 5 mm left-hand dowel drill bits - Positioning system for side stop with 8 stops - Additional pneumatic clamps Crjdoyf A N Djpfx Ah Eof - Mitre stop for FD 21 - Bracket for side stops and further accessories - Gauge for transferring the position of the cast stops - Coupling system for table extension

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Reference: R-A0117 Crjdoxxi T Uepfx Ah Eof