Used Casting for sale (1,871)

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10380840, clearance between the columns: 640 mm, column diameter: 125 mm, ejector force: 150,000 N, ejector stroke: 145 mm, mold height (min.): 300 mm, type of input current: three-phase, input voltage: 400 V, clamping force: 4,200 kN, Horizontal die casting machine Iodoyngv Tjpfx Ap Hobb Make: Bühler, Model: Evolution B42D, Year: 2004, Serial number: 10380940 Mould height: 300 - 700 mm Mould opening stroke: 640 mm Max. surface pressure: 100 N/mm² Min. clamping plate dimensions: 500 x 500 mm Clear tie bar spacing: 640 x 640 mm Tie bar diameter: 125 mm Ejector stroke: 145 mm Ejector force: 150 kN Max. closing force: 4200 kN Cycle time: 30 s Casting piston speed: 5.0 m/s Incl. die spraying system Gerlieva GS 1200/1400Z Incl. holding furnace Westomat ProDos DPC 900kg Incl. extraction robot ABB IRB 4600 M2004

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Isdpfjza E Rmox Ap Hsbb

Condition: excellent (used), Year of construction: 2019, operating hours: 7,000 h, functionality: fully functional, MACHINE CONSTRUCTION: - Cast iron bed, spindle head, and saddle system developed through computer-aided design and analysis (CAD/CAE), ensuring high rigidity and vibration damping - Fully supported table guide in every working position - X-axis (table movement) on 2 precision cylindrical roller guides, supported by 6 runner blocks each - Y-axis with 2 precision cylindrical roller guides - Z-axis with hardened and ground guideways, with TURCITE-B coating - Guideway protection via metal telescopic covers - Hydraulic counterweight / balance system - CE conformity Axes: - Preloaded ballscrews with large pitch for long-lasting precision - Digitally controlled, liquid-cooled ballscrew on the X-axis - Gear-driven ballscrews, ballscrew nuts with centralized lubrication, and lifetime-lubricated bearings CONTROLLER & ELECTRONICS + CAPACITY: - High-speed CNC, 1 ms block processing time - Storage capacity: 120 GB SSD - Technology program memory: 100 GB SSD - Number of processor cores: 4 CNC operating system: Iodpfx Apjzzf Ruj Hobb - User interface operating system: Windows 10 - Technology program storage: WINDOWS file system - Total storage capacity (system program, PLC, parameters, technology program memory) on a single SSD - New user interface (40-00005216-00w) SCREEN: Color graphical LCD touchscreen COMMUNICATION: USB, Ethernet, EtherCAT MEASURING SYSTEM: - HEIDENHAIN absolute EnDat 2.2 - PROGRAMMING: ISO, myNCT TECHNICAL DATA: - X-travel: 2100 mm - Y-travel: 1500 mm - Z-travel: 1000 mm Distance from spindle nose to table surface: 200~1000 mm Distance between columns: 1650 mm Distance between table and gantry/crossrail: 1710 mm AXES: - Rapid traverse speed X / Y / Z axis: 20 / 20 / 15 m/min - Max. working speed: 10 m/min - Motor power: 4 kW ACCURACY (according to JIS6338): - Positioning accuracy: +/- 0.01 mm (In the entire working area!) - Repeatability: +/- 0.004 mm TOOLING: - Max. tool diameter / with adjacent tool omitted: 125 / 215 mm - Max. tool length: 400 mm - Max. tool weight: 20 kg - Optional tool taper: SK50 Accessories & Equipment: - Angle head (manual) - Chip conveyor - Coolant flush gun - 15 pcs of SK50 tool holders - Machine leveling feet - Manuals The machine is in good used condition and operates accurately.

Year of construction: 2019, condition: ready for operation (used), A complete Respecta epoxy resin metering and casting system is available. 1) Big bag station for supplying fillers, max. particle size: 0.7mm, max. bulk density: 0.5g/cm³. 2) Two IBC connections for liquid components A and B with diaphragm pumps. 3) Two buffer tanks for A and B, volume: approx. 230l. Including level sensors and automatic IBC filling. 4) Volumetric metering to the mixing screw with flow meter and pressure monitoring. 5) Degassing unit. 6) Continuous epoxy resin inline heater with process monitoring of the resin temperature and the epoxy hardener, viscosity range: approx. 350-450mPas, max. epoxy resin temperature: 20°C. 7) Semi-automatic flushing and cleaning unit for the casting unit, volume: approx. 50l. Overall system control: Siemens Simatic S7, additional controls: control cabinets/frequency converters/industrial PC, overall system casting capacity: approx. 30l/min. The system allows mechanical preparation for retrofitting up to 3 additional filler metering systems. It is recommended to renew the lines and the diaphragm pumps before commissioning. Documentation available. An on-site inspection is possible. Iedsyt N A Hepfx Ap Hjbb

Condition: good (used), Year of construction: 2007, Graule miter and crosscut circular saw Type: ZS 170 Isdpfx Aezzf Dzop Hebb with a maximum cutting height of 170 mm sturdy cast iron construction precise ball bearing guide of the tool carriage on hardened and ground steel shafts manual saw feed quick miter adjustment up to 65° horizontally adjustable fixed stops lower saw blade guard can be connected to a dust extraction system Model: ZS 170 Motor: 400 Volt - 2.0 kW Speed: 3500 rpm Cutting length: 410 mm at 90 degrees Saw blade diameter: 420 mm Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2017, workpiece weight max. 2000 g Ijdpfoy Diauox Ap Hobb used weightcontrol WC2000 for die casting machines up to a unit weight of 2000 grams. The device has been checked and repaired by the manufacturer

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Ibsdpfx Ajw Ighiop Hjb Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: used, Year of construction: 1998, functionality: fully functional, USED AUTOMATIC BAND SAW, ALSO FOR ROTATING THE ARC DEGREES, MACO BSS 360 AR. • Cast iron tape-holding arch ideal for vibration-free operation • Workpiece clamping with double vise (patented) • Clamp with programmable movable position • Arc rotation system with adjustable play (patented) SOFTWARE • 5” touch HMI, can store up to 200 programs • Programming up to five different pieces per bar (length, angles, scraps) • Automatic calculation of: mirrored piece, minimal scrap in piece change, advance for scrap in multiple-cut piece cycle • Pre-set cycle for cutting non-symmetrical sections TECHNICAL DATA • Cutting capacity 90° Ø 260 mm, 230x230 mm 45° right Ø170 mm, 150x150 mm - 45° left Ø230 mm, 230x230 mm 60° right Ø120 mm, 110x150 mm • Blade size 3150x27x0.9 mm • Blade motor 1.5-2.2 kW • Cutting speed 37/70 m/min • Single feed stroke: Hydraulic version 780 mm - Brushless 1350 mm • Dimensions (without guards) 2200x3100x1300 (h) mm • Weight 1450 Kg Iodpfx Aezhuk Dop Hobb

Condition: used, maximum load weight: 12,640 kg, overall weight: 16,000 kg, first registration: 01/2022, loading space length: 7,700 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 2,925 mm, Year of construction: 2022, Vehicle No. G0115750_1 – Manufacturer: Krone. Iodpfx Asz A Rpvep Hobb * Double-deck equipment * Simple corner castings * Side/rear contour markings * Load certificate Code-XL * Roll-up door (aluminum) * Internal keyhole system * Forklift accessible * Front wall niche * Fixed support legs * Rail loading device * Lashing points Double-deck equipment without double-deck load bars (available at extra cost!). Financing available upon request. Financing possible. Delivery time: IMMEDIATE. Newly painted. Technically operational condition, bodywork and support legs newly painted. Chassis (KTL) cleaned and coated with underbody protection. UVV (accident prevention regulation) valid. UVV documents available. Swap body has been newly painted in pure white (RAL 9010). NEW PAINT !!!. LOAD SECURING CODE XL !!!. Dimensions are approximate. Offer subject to prior sale; prices are net ex location D-59302 Oelde. Further details upon request by phone or email:

Condition: used, Year of construction: 1994, functionality: limited functionality, Used Oskar Frech DAW 125 with control cabinet and crucible Ibjdpewywn Eofx Ap Hob

Condition: refurbished (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 01 Crumbler, type of input current: three-phase, year of last overhaul: 2026, working width: 1,800 mm, roller length: 1,400 mm, CPM PELLET 855 CRUMBLER Model 855 DA Manufactured in 1988 Rated capacity of 20 tons per hour. Ibedsz Aryxopfx Ap Hsb Consisting of the following: 2 x 11 kW, 1800 RPM, 3-phase, 440V motors 8-inch diameter x 55-inch long chilled cast iron rolls.

Condition: excellent (used), HOFMANN TFS 107 table milling machine – used Tilts on both sides, Height adjustment is electric, Tilting is electric, Milled cast iron table, Extendable support, Finely adjustable fence, Quick-change tool holder for milling cutters, Right/left rotation, Socket for feed ----- Technical data ----- Tilting range: -45.5 to 45.5°, Table size: 2,000 x 815 mm, Working table height: 895 mm, Spindle diameter: 30 mm, Usable length of milling spindle: 120 mm, Max. milling cutter diameter: 240 mm, Max. diameter of recessed milling cutter: 240 mm, Ibedpfxjz A Upto Ap Hsb Height adjustment: 120 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Motor: 7.5 kW, Dust extraction port Ø: 120 mm, Dust extraction port Ø at the bottom: 120 mm, Dimensions (L x W x H): 2,000 x 1,300 x 1,300 mm, Weight: 820 kg Quality information: - Milling spindle newly fitted with bearings - Roundness accuracy of the milling spindle checked - Brake checked/replaced - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Cast iron 22 M 36 Isdpfjzza Nxjx Ap Hjbb AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Spindle guard

Condition: used, machine/vehicle number: 4038, functionality: fully functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, saw blade diameter: 330 mm, saw blade bore: 32 mm, actuation type: pneumatic, rotational speed (max.): 3,800 rpm, ELU Miter saw, model MGS 73 for aluminum and plastic profiles Saw blade 330 x 3.2 x 32 mm, Z = 96, negative tooth angle Cutting height approx. 80 mm, Ibsdpfx Aezbr Uzsp Heb Miter setting right/left +/- 45°, 2 pneumatic clamps, horizontal, 2 pneumatic clamps, vertical, Motor 2 kW (2.7 hp), 380 volts, 50 Hz, pneumatic feed with hydraulic feed brake, 2-hand operation: left: clamping and releasing, right: saw feed, cast table extension on the right with stop and measuring scale 0 - 3,000 mm without emergency stop switch!, without motor brake! as inspected, ex works Seevetal, Ex Works, without transport, subject to prior sale.

Condition: used, Year of construction: 2015, Base machine T65C Automatic, 1 unit General technical features: • Weight: 1600-2,200 kg, Martin composite stand • Table size: 860 mm x 1370 mm in gray cast iron; table extension is standard, designed as a lockable tool tray, 335 mm x 625 mm • Table height: 900 mm • Scoring table: Standard length 3000 mm, table length corresponds to cutting length; position-independent locking; guides are hardened, wear-resistant, self-cleaning; table lip is replaceable; design in anodized aluminum • Saw blade spindle: Ø 30 mm for main saw blade, two drive pins 8 mm • Saw blade change: Quick-change system "ProLock" • Saw blade diameter: Ø 250 - 550 mm; can be recessed under the table up to 400 mm; saw blades up to Ø 400 mm can be used with inserted scoring saw blades • Cutting width: 1,100 mm • Saw blade swivel: 0° to +46° • Cutting height: max. 204 mm / saw blade 550 mm / 0°, max. 135 mm / saw blade 550 mm / +45° • Cutting width (main saw): Saw blades with max. 6 mm cutting width at swivel angle 0° to +46°; special tools with max. 20 mm cutting width at swivel angle 0° • Motor power: 5.5 kW (7.5 hp), 3 ~ / 400 V - 50 Hz • Speeds: 2800 / 4000 / 5000 rpm; easy and convenient speed change from the front via the chip guard • Length stop: Design in anodized aluminum with continuous support, fine adjustment for both fence elements; dimension display via a scale with a magnifying glass; length compensation for angled cuts with electronic assistance; cutting length 95 - 2000 mm, extendable up to 3220 mm • Cross table: Design in zinc-coated steel; angled cuts according to the scale without repositioning the stop; integrated fixing positions for 0°, 22.5°, 30° and 45° cuts, one-hand clamping on the scoring table; support dimensions 1340 x 650 mm • Parallel stop: Electromotive positioning of the parallel stop; stop bar in anodized aluminum, foldable; complete integration of the parallel stop into the control system; guided by four grooved ball bearings, floating above the machine table, removable in any position; movement of the stop in the safety area (0 - 200 mm) in hold mode, display resolution: 0.1 mm; repeat accuracy ± 0.05 mm Ijdpfx Aez Alfusp Hebb • Extraction: Connection to protective hood Ø 100 mm, machine stand Ø 120 mm; minimum extraction air volume: 23 m³/min at 800 Pa at the main connection 120 mm • Protective hood: Protective hood with 2 blade sets (1x flat for 0° cuts, 1x with a one-sided belly for cuts 0° to 46°); passage dimension between saw blade axis and support column: approx. 900 mm, clearance when the hood is swiveled away between the saw blade and the protective hood arm: approx. 635 mm; releasing the locking from the working position • Standard accessories: 1 scoring shoe on the scoring table, 1 handle for pushing the wood, 1 ProLock combination wrench, 1 return handle, 4 shims (250/350, 350/450, 450/500, 500/550), 1 push stick • Control panel: Control panel at eye level, can be swiveled away • Electrical equipment (according to VDE/EN 60204): Electronic soft start/stop device for the main saw blade; contact for controlling the extraction; motor protection switch and winding protection, emergency stop button; required voltage supply: 3 ~ / 400 V - 50 Hz • Emission values, workplace emission: Noise values according to DIN EN ISO 11202, dust values according to DIN 33893. Please refer to the operating manual for the technical values. Performance features of the T65 control system: Performance features of the 5.7" (145 mm) touch screen control system with color L

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Bosello SRE MAX 70-120 Radioscopy and Digital Tomography System Complete, turnkey system, ready for immediate operation. Technical specifications X-ray source: 225 kV Detector: Integrated digital flat panel Bosello SRE MAX 70-120 Radioscopy and Digital Tomography System Ibodpfxoz Aimpe Ap Heb Complete, turnkey system, ready for immediate operation. Recently inspected and certified by Bosello (manufacturer). Technical specifications X-ray source: 225 kV Detector: Integrated digital flat panel Part manipulation: Motorized rotating table + XY stage Access: Front door Control software: Bosello IP EXTREME (integrated into the system) CT workstation: Dedicated computer with Volume Graphics VG Studio MAX Key features Complete 2D digital radioscopy and 3D computed tomography system in a single unit IP EXTREME: real-time imaging, advanced processing, measurement, and reporting VG Studio MAX license included and transferable – CT reconstruction, dimensional analysis, porosity assessment, and defect detection Rotating table + XY stage for precise and repeatable positioning Ergonomic front access for convenient loading and unloading of parts Recently inspected and certified by the manufacturer (Bosello, Zeiss group) – report available Software licenses: Both IP EXTREME and VG Studio MAX are fully transferred to the new owner. Applications: Casting inspection · Welding control · Dimensional CT · Quality in automotive and industry · Component integrity Year: 2015 Condition: Used – excellent condition. Complete and operational system.

Condition: used, functionality: fully functional, VIFESA KMV-1800 - Industrial Mixer/Dispenser Equipment in excellent condition, ready for operation! (see attached photos) Key features: Model: Vifesa KMV-1800 Nominal capacity of 1800 liters Large-volume yellow hopper in excellent condition Robust white metal frame with chain-operated lifting system Complete motor and mechanical system Original VIFESA electrical panel Ideal for mixing concrete, mortars, chemicals, additives, feed, or other bulk materials Ibedpfjzcwm Ssx Ap Hsb Condition: Used, but very well maintained. Fully functional. Shows normal signs of use (dirt and work marks), but with no cracks or structural defects.

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER Measuring and marking plate made of cast steel/grey cast iron, heavily ribbed High-precision measuring plate with quality surface finish Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Ijdpepwpxcefx Ap Hobb Thickness: 350 mm Plate thickness (top): 50 mm solid material with 300 mm ribs Working height: approx. 800 mm - with manually movable measuring arm, measuring range X=1490 mm, Y=1000 mm, Z=1250 mm - with 3-axis digital readout Grundig MZ 1030 - machined side surface at 90° angle to the table top, 2000 x 350 mm - 5 height-adjustable feet Required space (L x W x H): 2000 x 1500 x 2500 mm Weight: approx. 2600 kg In good condition

Condition: as good as new (ex-display), Year of construction: 2026, For sale is a new, automatic bandsaw BEHRINGER HBE321A Dynamic, manufactured in 2026. This machine is our demonstration unit – it has been assembled and connected in our facility. You can view the machine in person, test it, and perform trial cuts with various materials. The BEHRINGER HBE321A Dynamic is a modern, fully automatic bandsaw designed for precise and efficient metal cutting. The machine is suitable for cutting solid material, pipes, and various profiles, as well as harder-to-machine metals. Key Information Manufacturer: BEHRINGER Model: HBE321A Dynamic Year of Manufacture: 2026 Condition: New / Demonstration Machine Type: Automatic Horizontal Bandsaw Cutting Capabilities Round material 90°: Ø 320 mm Rectangular material 90°: 350 × 320 mm Minimum dimension of round material: Ø 10 mm Minimum dimension of rectangular material: 10 × 8 mm Automatic feed stroke: 650 mm Ibedpjz A R Ncofx Ap Hsb Minimum remaining material in automatic mode: 70 mm Technical Specifications Cutting blade speed: 15–110 m/min Cutting blade dimensions: 4440 × 34 × 1.1 mm Main motor power: 2.6 kW Total power: 3.7 kW Saw feed: servo drive with ball screw Material feed: ball screw Material clamping: hydraulic Blade cleaning: electrically powered chip brush Control and Automation The machine is equipped with the BEHRINGER BehrCtrl10 touch control system, which allows for convenient control of the automatic cutting process. The servo-controlled saw feed with cutting pressure control automatically reacts to the changing cross-section of the material. The automatic blade guide adjusts to different material dimensions, eliminating the need for manual adjustment when changing workpieces. Construction and Equipment BehrCtrl10 touch control Automatic material feed Servo-controlled saw feed Cutting pressure control Automatic blade guide Hydraulic material clamping Dual material clamping Electric blade cleaning brush Fully enclosed work area The robust cast iron saw frame reduces vibrations and helps ensure stable and accurate cutting. The manufacturer also states that the modern gear and hydraulic solutions used in the HBE Dynamic series reduce energy consumption compared to the previous generation model. Dimensions and Weight Length: 1850 mm Width: 2300 mm Height: 1880 mm Weight: approximately 1900 kg Material feed height: 800 mm If you have any further questions, please do not hesitate to ask.

Condition: used, Year of construction: 2026, New exhibition machine! General technical features: - Control system: 7.0" touchscreen ConnectTouch - Cutting height and cutting angle are electronically controlled, with digital input of cutting height and angle (controlled positioning of the motorized axes) as well as movement of the motorized axes in hold mode (movement of the axes via push button); Display resolution: 0.1 mm or 0.01°; Repeat accuracy ± 0.05 mm or ± 0.005° - Weight: approx. 1,600 - 2,200 kg - Table size: 860 mm x 1,270 mm in gray cast iron; Table extension as standard across the full table width - Table height: 900 mm - Stand: The machine stand is a stable, thick-walled composite construction, implemented in this form and perfection exclusively by MARTIN. The intelligent combination of the two materials, steel and concrete, creates a high-quality stand that is unsurpassed in terms of stability, damping capacity and torsional stiffness. - Tools: Diameter 250 - 450 mm, optionally up to 550 mm; Main saw blade ø 30 mm with auxiliary holes, Scoring saw blade ø 36 mm; Tool cutting width max. 20.0 mm for machines with single-sided tilt, 6 mm for machines with double-sided tilt; Saw blades up to 350 mm can be recessed under the table. Special tool diameter max. 400 mm, weight max. 12.0 kg - Tool change: Quick-change system ProLock - Tool swivel: 0° to +47°, optionally -46° to +46°; Swivel is only possible with saw blades up to 6 mm cutting width - Cutting height: 0°: max. 155 mm / Saw blade ø 450 mm; optionally: max. 205 mm / Saw blade ø 550 mm T7710/1: +45°: 106 mm / ø 450 mm; optionally 141 mm / ø 550 mm T7710/2: +45°: 104 mm / ø 450 mm; optionally 144 mm / ø 550 mm -45°: 88 mm / ø 450 mm; optionally 123 mm / ø 550 mm - Motor: State-of-the-art synchronous motor SynchroDrive with large power reserves in energy efficiency class IE4 - Motor power: 5.5 kW, optionally up to 11 kW; due to its design, the motor can be overloaded several times its rated power for a short time and therefore offers large power reserves - Speed: Continuously variable 1,000 - 5,000 rpm - Control panel: The control panel is at eye level and is pivotably mounted around its vertical axis. In addition, it can be swivelled to the right, so that even larger components can be easily processed - Rip fence: Standard length 3,000 mm, table length corresponds to cutting length; position-independent locking; guides hardened, wear-resistant, self-cleaning; table edge replaceable; made of anodized aluminum - Length stop: Made of anodized aluminum with continuous support, fine adjustment for both flap stops; Measurement display via scale with magnifying glass; Cutting length 95 - 2000 mm, extendable up to 3220 mm - Crosscut table: Made of steel with powder coating, workpiece support in anodized aluminum, two sliding struts to extend the support surface; Length stop can be placed in the front and rear position without lifting; One-hand clamping on the support surface 1340 x 650 mm - Surfaces: Stand: Stand with high-quality powder coating; Cast iron: Table surface finely milled; Aluminum: Aluminum components anodized - Protective cover / Extraction: Height-adjustable protective cover including interchangeable rear part for angular cuts; Protective cover for saw blades up to ø 450 mm (optional 550 mm); Extraction connection on the cover: Ø 80 mm, on the machine stand Ø 120 mm; Total extraction connection Ø 140 mm; Minimum air volume: Vmin 18.5 m3/min at 20 m/s, underpressure 1,400 Pa - Electrical equipment: Connection Ibjdpoz A Hh Ujfx Ap Heb

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) Iodpfx Aethuzpop Hjbb - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 10306675, type of input current: three-phase, input voltage: 400 V, clamping force: 8,400 kN, input frequency: 50 Hz, Horizontal die casting machine Manufacturer: Bühler, Model: SC D/84, Year: 1999 Serial number: 10306675 Max. locking force: 8,400 kN Cycle time: 30 s Iodpsynh Dlsfx Ap Hjbb Casting piston speed: 5.0 m/s Including Gerlieva GS 1200/1400Z mould spraying unit Including Westomat W900SLDG 900kg holding furnace Including ABB IRS5 45kg extraction robot

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-15, Technical Data: - Load capacity of the positioning table approx. 750 kg - Diameter of the chuck plate 500 mm - Max. workpiece diameter 1600 mm - Height of the rotary table in horizontal position approx. 750 mm - Rotary table with right-hand and left-hand rotation - Rotary axis of the rotary table, continuous rotation 360° - Rotation time per revolution 12.5 sec. - Swiveling to the left and right - Swivel axis, swivel angle 180° - Swivel time for 180° swivel angle 10 sec. - 2 x double-foot switches for rotary table and swivel arm - Hydraulic clamping bolt for clamping the workpiece in the center of the rotary table - Clamping stroke / clamping distance of the clamping bolt 32 mm - Clamping force, pressing / pulling 80 / 48.9 kN Ibsdpegu Dwpefx Ap Hob - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation: manual or via control unit - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg - Separate control cabinet with high-frequency unit for - High-frequency tools

Condition: good (used), Year of construction: 2009, Ref. -No.: 10662 Manufacturer: STARRAG HECKERT Type: HEC 1250 Athletic Year of construction: 2009 Type of control: CNC Control: Siemens 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 221XXX X-Travel: 2200 mm Y-Travel: 1600 mm Z-Travel: 1850 mm Spindle Diameter: 100 mm Max. Tool Weight: 35 kg Max. Tool Length: 800 mm Max. Tool Diameter: 250 mm Clamping Area: 1000 x 1250 mm Tool Piece Magazine With: 60 Pcs./pcs. Max. Torque: 25.000 Nm Turning Speed Range - Stepless: 40000 mm / min Rapid Traverse: 40 m / min Numbers Of Pallets: 2 Ibsdpsz Adt Refx Ap Hsb pallet change time: 47 s Weight Of The Machine Ca.: 26,5 t Position uncertainty P: 0,008 mm Position deviation Pa: 0,006 mm Positional dispersion Ps: 0,005 mm Maximum table rotation: 10 RPM Further information: - Design: Thermally symmetrical column design with optimal chip flow for machining castings. - Applications: Mechanical engineering, energy technology, and the machining of large gearboxes and engine components. - Powerful motor spindle (up to approx. 82 kW, depending on the model) for heavy-duty machining. - The Heckert HEC 1250 Athletic (built in 2009) is a high-performance, modular 4-axis large-scale machine for the precise complete machining of heavy workpieces. The machine can be viewed while powered on by prior arrangement.

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Force Presscylinder: 6000 KN Ibjdpfx Aexy Hbxsp Hjb Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately