Dosing and Casting System

Respecta Epoxidharz

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Gujdeycuuyspfx Ankeb Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Gusdeyhd Dbjpfx Ankeb Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm Gsdpfx Aox Dip Tsnksub L/D: 40D Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Gedpfswcwbqox Ankoub

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240l Filter cleaning: motorized motor power: 3 kW Noise level: 78dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Gsdpjhpmawefx Ankjub Weight: 178 kg

Condition: excellent (used), Year of construction: 1998, A stainless steel filter system with compressed air cleaning in very good condition. Filter area 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan drive power 22kW; volume flow: 6700m³/h; pressure: 8000Pa Compressed air valves: ASCO 24Volt Number of filter pockets: 48 Filter medium: no longer available Insulation: Yes Guodpsfg Iphsfx Anksb with differential pressure measurement Size L/W/H: 3000mm/ 1700mm/ 2100mm (up to outlet) The filter consists of 2 modules that are divided in the middle. Also available stainless steel cooling screw Ø400mm; length 4100mm

Condition: like new (used), Year of construction: 2022, Immediately available, 12-month warranty, excellent condition Recirculating oven for solvent-based materials according to DIN EN 1539, available with 4 loading trolleys - Max. temperature 150°C (can be increased upon request) - Usable volume: 1,875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Loading tracks, recesses for feeding the oven with a loading trolley - Maximum permitted quantity of flammable substances at 150°C: 83.9 g Gusdpjxbtvfsfx Ankjb - Minimum exhaust air flow at 20°C: 360 m³/h - KS Regler 40-1 controller for simple temperature regulation with pre-set ramp or hold times (1 program, 4 segments) - Controller features self-optimization and up to 3 process outputs - Additionally, a simple timer is integrated, operable via front buttons - Electrical connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating capacity: 36 kW - Net weight: 820 kg - Only available with 4 loading trolleys, each with 12 trays and 24 stainless steel shelf levels - Documentation, CE declaration - Electrically tested and supplied with the latest DGUV test protocol Inspection possible at our warehouse by appointment. Oven, ovens, drying oven, kiln, heat oven, heat cabinet, industrial oven, solvent oven, tempering oven, preheating oven, temperature oven, drying cabinet, chamber oven, curing oven, recirculating drying cabinet, recirculating oven, paint dryer

Year of construction: 2002, operating hours: 1,378 h, condition: excellent (used), Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Guodpfsyf Itnjx Ankeb Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Year of construction: 2010, condition: refurbished (used), Revised Multicracker MC370 Gusdpfx Aned Nxnkjkjb

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, volume flow: 7,880 m³/h, filter area: 39 m², total height: 2,816 mm, total length: 3,999 mm, total width: 1,367 mm, overall weight: 1,550 kg, compressed air connection: 5 bar, * Mobile dust extractor – High-quality extraction technology for flexible applications • Mobile, robust dust extraction system Suitable for indoor and outdoor use – ideal for workshops, construction sites, and temporary production areas. • Particularly stable and high-quality construction Larger dimensions than standard devices – designed for long-lasting, professional continuous use. • Unique selling point: Mechanical-pneumatic filter cleaning ✓ Most efficient cleaning method on the market ✓ Low-maintenance, compressed air-operated without electronics Guedpowku Iqefx Anksb ✓ Lowest energy consumption compared to conventional systems • Compact, sophisticated design Allows easy connection to: o Briquetting presses o Decoupling locks o Containers or conveyor systems • Plug-and-play delivery No installation required – ready for immediate use • Suitable for various materials Wood, plastic, mixed dusts, and much more