1 piece used, tested side channel blower
air volume: 1050 m³/h
Ppmhj
Connection thread: G 4
Side channel blower, side channel blower, ring blower, vacuum pump, blower
-Manufacturer: Siemens, side channel blower, side channel blower type 2CH5 031
-Drive: 1.0 KW
-Speed: 2840 rpm
-Connection input: Ø 50 mm
-Connection output: Ø 50 mm
Bzwjymz
-Dimensions: 325/330 / H340 mm
-Weight: 20 kg
7
Side channel compressor 1-stage, 0,25 KW, stand foot, colour grey, weight 7 Kg, voltage 230-400V, 50HZ
Suqd9o
Gardner Denver G-BH1
2BH1430-7AH16
No. BN 10098519 002 / 0411
50 Hz, 0,85 kW
2840/min
incl. rolling board
Ecy8v8vem
3 pieces available
(ID: HV6137-1000)
Various side channel blowers and vacuum pumps from various manufacturers (see pictures)
More details by email
9cq2q0lc
There are 6 identical side channel compressors available, power: 6kW, volume flow: 9m³/h.
Bevxp8czmy
R4P
Power
Bk3mbe9h7y
1.5 HP (1.1 kW)
Max Flow (50 Hz) 110.0 cfm (187.0 m³/ h)
Max Flow (60 Hz) 127.0 cfm (216.0 m³ / h)
Max. Pressure (50 Hz) 47 in-H20 (117.0 - 125.0 mbar)
Max. Pressure (60 Hz) 65 in-H20 (162,0 mbar)
Max vacuum (50 Hz) 43.0 - 45.0 in-H20 (107.0 - 112.0 mbar abs)
Max vacuum (60 Hz) 60.0 in-H20 (149.0 mbar abs)
Weight 28 kg
Side channel blower, side channel blower, ring blower, vacuum pump, blower
-Manufacturer: Elektror, side channel blower side channel blower type SD-4N
Bwpvjbmfut
-Drive: 0.95 KW
-Speed: 2760 rpm
-Volume flow: 2.8 m3 / min
-Connection input: Ø 45 mm
-Connection output: Ø 50 mm
-Dimensions: 375/360 / H460 mm
-Weight: 20 kg
8
Side channel compressor 1-stage, 0,37 KW, with silencer and stand foot, volume flow 90 m3/h, overpressure +85 mbar, colour grey, weight 16 Kg, voltage 230-400V, 50HZ
Br0zjzxrdl
Sell these two side channel blowers the manufacturer Rietschle vacuum pump.
Bbdiq0rc
Refer to the technical data based on the type plates.
The devices are ready for use immediately.
Serial-No.: E 2097195, rotational speed: 2800/3300 min, suction capacity: 130/156 cm³/h, compression pressure: 135/125 mbar, volume: 130/158 m³/h, 135/125 mbar
Na9g9nqin
Fabr. Fuji
Type: VFC506AN
three-phase motor 345 - 415 Volt, 50 - 60 Hz, 1.3 -1.9 kw
Ebf7arj
Air output 2.4 -3 m³/min
3 pieces available
Side channel blower, ring blower, vacuum pump
Sfop09yvb
-Drive: 0.75 kW
-Feed rate: 130 m³/h
-Max. Compression pressure: 195 mbar
-Speed: 2800 rpm
-Number: 2x pumps available
-Price: per piece
-Dimensions: 320/280/H420 mm
-Weight: 16 kg/piece
7
Side channel compressor 1 stage, power 0,25 KW, 230V-400V, 50Hz, suction power -40mbar, colour grey, weight 7Kg
Corlzwx
6
Side channel compressor 1-stage, 0,37 KW, with silencer, with stand foot, voltage 230-400V, 50HZ
Eltezjyhi
Colour grey
Weight 16 Kg
5
Side channel compressor 2-stage,
4,0 KW,
suction pressure -400 / +410 mbar,
base,
Colour grey,
weight 52 kg,
voltage 230-400 V, 50 HZ,
Br0zmpsdxu
incl. 16 A plug
5
Side channel compressor 2-stage,
power 5.5 kW,
Brusam8k0u
230V-400 V, 50 Hz,
suction power -400 mbar,
colour grey,
weight 68 kg
for suction conveying system
4
Becker side channel compressor air cooled,
with stand,
3 kW
New, unused,
For pneumatic suction conveying systems,
air connection 2,5 inch,
Xfvhysct
internal thread,
Integrated vacuum safety valve,
Voltage 230-400 V, 50 HZ,
Colour grey aluminium,
Weight 52 kg
Compressor Metabo Ct750 / lt 270 used 2005
Mark:
Metabo
Model:
Ct750 / lt 270
Biugincfpo
Description:
Manufacturer Metabo
Model / machine type CT750 / LT 270
Year of production 2005
Category of machines Piston compressor
Location
Gorzów Wlkp.
Conditions of delivery
COLLECTIVE AND SHIPPING REFLECTIONS
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
COMPRESSOR CT 750/270 COMPRESSOR The compressors of the Italian company SHAMAL® are the highest quality devices and...
The Ibix 9 blasting machine is light-weight, compact and very suitable for mobile small blasting jobs. The machine is completely made of aluminium and comes with a standard 5-year warranty. Thanks to the lightweight construction, the Ibix 9 can be used anywhere and can even be transported on the back. The Ibix 9 blast machine is designed for professional intensive use. The Ibix 9 blast machine is often used for the following applications: Removal of paint and wax layers from wood and furniture M...
Compressor
Make Hydrovane
Type IP 54 56531-10 /G
height 400 mm
Pm2pr
width 660 mm
Depth 240 mm
Side channel blower, ring blower, vacuum pump, radial blower
-Drive: 1.5 kW
-Flow rate: 4.6 m³/h
-Max. Vacuum: 70 mbar
-Speed: 2880 rpm
-Dimensions: 500/H500 mm
Ql0j293a9
-Weight: 68 kg
power capacity 18,5 kW
feed pressure 40 bar
liter capacity 1100 l
total power requirement 18,5 kW
Bheloa30c2
weight of the machine ca. 1 t
dimensions of the machine ca. 2,2 x 1,2 x 1,4 m
in excellent condition,
without contactor control,
unknown operating hours - no counter included,
was only used for testing purposes,
LT Industries – Quantum 1200 Plus, model 20 channel multiplexer
• Real-Time Multi-Constituent Process Analyzers
• Multipoint, Fiber Optic Multiplexing Capability
• Shock and Vibration Free
The LT Industries Quantum 1200 Process Analyzer Series is comprised of the rugged, rapid scanning Quantum 2000 and 1200 Systems which were developed for both Pilot Plant and dedicated stand-alone installations in closed-loop-control of manufacturing processes. Using rugged, proven technology, LT Industries' sy...
used compressor
Year of manufacture: 2016
completely new serviced
Suction capacity 650 l/min
Ca2hqirhk
Filling capacity 520 l/min
Maximum pressure 10 bar
Tank capacity 2 x 100 l
Speed 950 rpm
Motor 4 kW
Weight 235 kg
with swinging elements
with safety stand pallet
with refrigeration dryer
with fine filter
with condensate conditioner for oil-water separation
with automatic condensate drain
Availability: short term
Storage location: Hocheim
Mycom / Mayekawa compressor for spiral freezer, bought new in 2017/18 and used until the factory closed in 2019. We recently removed the complete refrigeration system and spiral freezer. Very rare opportunity to buy nearly new refrigeration compressor.
Bytvic3lv8
power capacity --- kW
feed pressure --- bar
Pvosga
liter capacity --- l
operating pressure 11 bar
volume 1500 L
Flush compressor, flush connections
-Flush connections: 15
-Controls: 11
-Packed: in lattice box
S0q3k9
-Sale: only complete
-Weight: 312 kg
output 380 Volt/32AP
volume 50 L
Bfgpghtpsi
weight of the machine ca. 6,4 t
second hand
Make Kreher
Type KAF-0 550-0
Machine no. 002 85 043
Distance between centers approx. 900 mm
Btoilg72b7
Center height approx. 200 mm
Motor 1.1 kW
Right-left run
Space requirement approx. 1400 mm x 700 mm x 1500 mm
Total connected load 1.1 kW
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarantee and warranty
Drying channel Balcke-Dürr
with Nemo heat exchanger
working width 1300 mm
throughfeed height approx. 80 mm
length of the drying channel approx. 4000 mm
drying by warm air
for the connection to a hot water supply
material transport on transport rolls
control for temperature, infeed speed, blower on/off
Byv7s0y3uv
Renner RS 11
Leistung: 11 kW
Betriebsdruck: max 13 bar
including RENNERTronic
Fully functional and maintained
Clanhamg
Technical data:
Bcteqlby0l
-2 piece L 11-100 oil-injected screw compressors and
-Microprocessor control - operating pressure 10 bar
-Quantity 1.41 m ³/min
-Engine speed
-Drive 400 V / 11 kw - space each approx. B H 670 x 1050 X 630 mm
-Hours of operation each approx. 9500 h
-with:
-COMPAIR compressed air dryer
-Compressed air tank
-Öwamat
-Piping
Canal strut, canal strut, canal support, construction support, shoring strut
-Canal brace: for trench sheeting
-Length: 1.10-1.40 m
-Tube diameter: 42 mm
-Support plate: 70 x 70 mm
-Number: 208 struts available
-Price: per piece
Dionccmp
-Weight piece: 6 kg
-Dimensions:
-Weight: 460 kg complete with transport box
feed pressure 5 - 13 bar
liter capacity 0,25 - 1,1 m³/min
control Air Control 2
Receiver capacity 2 x 70 l
total power requirement 7,5 kW
weight of the machine ca. 0,3 t
dimensions of the machine ca. 1,2 x 0,8 x 1,7 m
2s0o73
Compressed air cooler is integrated
Compressor is practically unused
Field of application: Construction
Bjgin9vxxp
Empty weight: 1.725 kg
Make of engine: John Deere 4045HFC04
Compressor type: Screw compressors
Transport dimensions (LxWxH): 4.95x1.58x1.8
Type of fuel: Diesel
Year of construction: 1983
Dnfoowumc
Offer 20587
Technical data:
- Operating pressure 10 bar
Cmqesogw
- Delivery rate 1,48 m³/min
- Drive 400 V / 11 kW
- Space requirement approx. W 720 x H 1350 x D 650 mm
- Weight approx. 200 kg
- Operating hours [ read ] 6481 h
Canal strut, canal strut, canal support, construction support, shoring strut
-Canal brace for trench sheeting
-Length 1.40-1.65 m
-Pipe diameter 42 mm
- Support plate 70 x 70 mm
Lj3dcyo
-28 struts available
-Price piece
-Weight piece 6 kg
-Dimensions
-Weight 268 kg complete with transport box
ROTARY SCREW COMPRESSOR WITH REFRIGERANT DRYER
Air Control 3 control display
Variable Speed Drive for motor
capacity: 760 - 4240 L/min
pressure max: 13 Bar
motor: 30 Kw
Byqeipdnk0
power: 400V / 50 Hz / 3 F
compressed air connection 1 1/2'
dimensions approx. L x W x H = 1270 x 795 x 1170 mm
weight approx. 405 kg
Advise used machines:
• Technical data without obligation, mistake and intermediate sale reserve.
• Price is considered ex-location price
• All articles or machines are bought ...
used dental piston compressor medicom 400/90 K
with soundproof hood
with 90 liter compressed air tank
Byvbmxbw0c
Year: 2004
good condition
Technical specifications:
Motor power: 2.4 kW
Delivery rate 280 l / min
Pressure: 7 bar
L x D x H: 1180 mm x 520 mm x 980 mm
Field of application: Construction
Empty weight: 920 kg
Make of engine: Isuzu IRJ7N
Capacity: 5,1 m³/m
Technical condition: average
B3vou27c
Compressor type: Screw compressors
Transport dimensions (LxWxH): 2x1.1x1.22
Working pressure: 7 bar
Kaeser brand piston compressor with 250l tank.
Including sound insulation hood.
Tank last inspected 09/2018 (next strength test due 2023).
Ip39fbcl
Approx. 130 operating hours
Regularly maintained and hardly run.
Inspection book and maintenance certificates available.
New value approx. 3500€
OFFER 16207
Technical data:
- Version vertical
- max. operating pressure 10 bar
- Fully galvanized pressure vessel / boiler
- Pressure vessel capacity 270 l
- Suction volume 625 l/min
- Delivery volume 470 l/min
- Compressor speed 940 rpm
Ft3cxb2
- Cylinder stages 2 - 2
- Drive 400 V / 4,0 kW
- pressure gauge
- 3 swinging feet
- Boiler diameter approx. 600 mm
- space requirement approx. W 800 x H 1850 x D 800 mm
- Weight approx. 240 kg
Canal strut, canal strut, canal support, construction support, shoring strut
Xywikgpxc
-Canal brace: for trench sheeting
-Length: 1.40-1.65 m
-Pipe diameter: 70 mm
-Support plate: 140 x 100 mm
-Number: 36x struts available
-Price: per piece
-Weight piece: 20 kg
-Dimensions:
-Weight: 758 kg complete
High pressure air piston compressor KAESER type N 753-G
High pressure booster
Series. No. 1001 Item No.: 1.2301.40620 Year of manufacture 2012
Required delivery 6930 litres/min. at 7.5 bar (as inlet pressure)
Compressed to 37 bar 1386 litres/min.
Pressure capacity max. 37 bar
required inlet pressure 7,5 bar
Pressure capacity 37 bar
Compressor speed 720 rpm
Nominal motor speed 3000 rpm.
Motor power 33,5 kW
Mains connection 400 Volt, 50 Hz
- 3 cyl. piston compressor 1-stage + pre-pressure
- electr...
Used 5.5 kW screw compressor FirstAir
Year: 2016
Hours: 8504
Type: FAS6
Year of construction: 2016
Operating pressure: 10 bar (ue)
Delivery quantity at 10 bar (ue): 700 liters / min
Installed motor power: 5.5 kW
Protection class / insulation class drive motor: IP 55 F
Operating voltage: 400V ~ 50 Hz
Sound pressure level (EN ISO 2151): dB (A) 68
Byvbl0of79
Compressed air connection: G 1/2 "
Length: 660 mm
Width: 600 mm
Height: 890 mm
Weight: 240 kg
Drive: V-belt drive
Visit our shop.
We always ...
