A Complete Photo Book Production System
2 machines allowing you to make up to 320 photobooks or books per hour with just 2 operators!
Complete solution easy to use.
No Clean-ups
Zero setup time
Clean ecofriendly system
What can you produce on the Casemaker?
Image wrapped covers
Plains or buckram covers
Once you have your cover you simply add your pages and the BCC10 will glue you pages to the cover and form the spine.
Very low entry point to the photobook market for serious players.
Wide ...
Bucheinhängemaschine - Book Casing-In Machine Schmedt PräLeg HHS 18
Year 1986 - Serial-No. 185
Blockstärke / Block thickness approx. 2 - 80 mm
Blockbreite / Block width 110 - 450mm
Qepb8zr9
Blockhöhe / Block height 80 - 450mm
Elektr. Anschluss / Power supply 1 Phase 200 - 240 V
Pressluftanschluss / Air supply 6 bar
-Online-Video-Inspection by Skype-Video-
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately - Can be inspect-
-On Stock Emskirchen / Nürnberg...
CASING IN MACHINE MAGRAF UK-46
-semiautomatic casing in machine is used to casing in all kinds of hardcover of hardcover books.
-it is change the size very quickly.
Gox3tc9ji
-maximum width of gliuing; 350mm
DGR Casing-in Machine E01
Casing-in machine for diaries and books
• Paternoster wing casing-in system for increased machine speeds
• Integrated press rollers after casing in
• High casing-in precision due to follower-type pressing rollers and suction rails
• Low maintenance gluing system
• Suitable for hard and flexible cases
• Case straightening and temperature assisted centre strip forming
• Can be connected inline to the forming press joint forming machine F03
• Simple operation
• Very short...
Ref:10389 . 2015 Zechini X Case Casing-in Machine.
Semi automatic casing-in machine with press & joint forming for digital, book-on-demand production. Ideal for medium-sized production and for oversized books.
Comprising;
Manual feed of book block without settings
Vertical wing action
Twin PVA cold glue tanks with application rollers
Manual positioning of case with guides
Working in conjunction with: -
2015 Zechini Cimatic Pressing & Joint Forming Machine.
For pressing a variety of thin to thi...
Built in 1988
Size:
max 300 x 300 mm
min 105 x 105 mm
Product thickness:
max 20 mm
min 1 mm
Speed: max 3600 c/h
Equipment:
infeed with hand fed
• infeed inline
• cover magazin
• case pre stack belt
• casing-in station
• belt delivery
Bcu7ekowyl
• central lubrication
• 1 set of operating manuals
• 1 spare part catalogue
• 1 set of electrical diagrams
• 1 set of standard tools
• standard equipment
Art. No. : Pum 141
Item condition : new
Stock : 1
Available: immediately
Delivery volume: 45-90 m³/h
Delivery head: 55-50 m Ws
Revolutions: 1470 rpm
Motor
Make: Stork
Power: 30 KW
Voltage: 3 x 400 Volt
Revolutions: 1470
Required motor power:
2 pieces in stock
Price per piece
Ulbpud8r
we have for sale :
casing in machine :
Polygraph Wegra BE-22
Bnr7mx3gg0
good condition
size max : 575 x 360 mm
size min : 130 x 80 mm
speed max : 1320 cycl/min
available immediately
Location : Poland, Gdansk
Volute casing pumps
sound condition
Bfsw3p9y3s
Maximum size: 120mm x 170mm
Minimum size: 60mm x 90mm
Kolbus KE Diary Casing-in Machine.
Bg0vtwbcxi
For casing-in thin, small size books, passports, diaries
PRAKMA Brochure Inserting Machine / Casing-In Machine Type: „Broschürer A“
Year: 1964
Mach.No. 167564
Format max: 330 x 235 x 60 cm
• With automatic feeder
• With creasing and gluing station for cold and hot glue
• With press Station
• Documentation
Bdb3flie
for casing-in of book blocks
with cold glue
Tjl2zghjw
Art. No. : Pum 132
Item condition : unused new, with traces from storage
stock: 1
Available: immediately
Delivery volume: 80 m³/h
delivery head: 30 m
revolutions: 2900 rpm
Motor
Make:
Power:
Ri9jw0np
Voltage: 3 x 400 Volt
revolutions:
Motor power required: 9.1 KW
casing in machine with PLC controls
Bjk0ioatiz
35 cm working width
Volute casing pumps
Bgsw2gpxa
Book rounding and backing machine with pre-heating device
Gauzing & head banding stations,
Casing-in station and cover feeder,
Building-in machine with 9 pressing stations
Belt delivery.
Manuals and tools
Bqzqnhk2wf
casing-in press for album (cases with foam board)
Clvhcct3
pressing- and joint-nippping machine
- basic machine
- pressing station 1., 2. and 3.
- heated joint-nipping unit
- delivery
This machine has been used for 500 hours in total
Bwn80qbgr3
Type of shirring head : Hydrolic-Pneumatic Blade
Operation mode : Semi-Automatic
Shirring Speed : 3750 m/hr
Casings diameter range : 32mm – 125mm
Type of casings : Polyamide, Cellulose, (Can be adapted for Collagen casing as well)
Casing’s core inside diameter : Standard of 76.2mm, Canbe adapted for less or more diameters
Max. Diameter of casing roll : 650 mm
Length of sticks : 200mm...
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
• Safe payment methods with possibility to pay at delivery
2003 - Kleemann MR 130 | Used Cone Crusher with 12m^3 feeder, hydraulic walls folding, vibrator, scalper, over band magnet, manual central lubrication, remote control, and a Deutz engine.
CE marked: Yes
EPA marked: No
69 Inspection points
69 Approved
0 Imperfections
0 Issues
Contact us for mo...
Case Bender Tränklein BDAM
Year 1995 - Serial- No. 009
Working width max. 500mm
undercarriage
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
En9euf2ui
-On Stock Emsk
measurement range min. 10 Kg
measurement range max. 500 Kg
table surface area 1200 x 1200 mm
measuring system resolution capability Teilstrich = 200 Gramm
Gw2ivhm9s
weight of the machine ca. 0,25 t
dimensions of the machine ca. 1,5 x 1,3 x 1,4 m
gradiograph with multiple rotating pointer head,
scale range in each case 100 kg,
ISO 40 pick-up
Drive power approx. 3.4 / 4 HP
12 speeds 45 - 2800 rpm
Byq9gll2vg
feeds X/Y , approx. 26 stepless up to 1100 mm/min
table area, W x D approx. 1200 x 700 mm
table load approx. 1500 kg
feeds approx. :
X - longitudinal travel 1000 mm
Y - transverse travel 800 mm
Z 1 - vertical travel approx. 600 mm
Z 2 - head adjustment additional +/- 150 mm
distance table / lower edge milling head , max. approx. 770 mm
weight approx. 3,8 to
Voltage with subsequently integrated transformer 400 Volt
D...
General Location Bremen Condition used
Fru9dw3d
Container Volume 550 Liter Vacuum 1,0 bar Max. Max. overpressure 3,0 bar Max. permissible operating temperature 100 °C Type of construction Container Stand form Frame
Technical data / dimensions Diameter inside 940 mm Cylindrical height 490 mm Total height 1.250 mm Total width 990 mm Total length 1.180 mm
Equipment manhole / dome in the top (DN 400) Type plate outlet 20 mm Remarks Differences in design: Volume, operating pressure (1 x only 1.5 bar)...
Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter
-Inch thread: 3/8 "-1 1/4" inch
Tlvc3tjh
-in: transport case
-Dimensions: 670/185/H95 mm
-Weight: 10 kg
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
• Safe payment methods with possibility to pay at delivery
2008 - Hitachi ZX140W-3 | Used Wheeled Excavator with Verarchtert hydraulic quick coupler, 1300mm GP bucket, 4.3m mono boom, 2.2m stick, 4 hydraulic auxiliary lines, ROPS protection, rear camera, 3D pre equipment, manual central lubrication and ISUZU engine.
CE marked: Yes
EPA marked: No
51 In...
Case Maker Smyth Freccia CM
The Automatic Casemaker machine can produce covers with hard backlining (having the same thickness of the cover), or soft backlining, fed by roll, having thickness from 0.5 mm to 0.6 mm.
In addition, the machine can produce covers "HALF CLOTH", (using 2 different types of coating material).
The covers "HALF CLOTH" are manufactured, following 2 different processes:
1st manufacturing process: cover production, using the same backlining material
2nd manufacturing ...
Control system: 3D contouring control Andronic 3060
Technical data:
Travel:
X-axis: 550 mm
Y-axis: 400 mm
Z-axis: 400 mm
MAIN DRIVE
High frequency spindle Fischer (MFW 1224)
spindle speed range: 1-42000 rpm
spindle power: 15 KW
tool holder: HSK E40
Equipped with options:
-32-fold tool changer
- Graphite / MMS extraction system Keller (Ex-protected version for ignition source avoidance with explosive dusts)
with autom. NC STOP of the HSC milling machine in case of malfunct...
In this offer you acquire a welding machine "Woltersdorf Leopard L 5500" as good as new
Object of sale:
1 x Woltersdorf Leopard L 5500 with the following equipment:
Bl7zaio7qu
incl. DV case MIG 15W
incl. intermediate hose package 10m
Condition:
This offer is for a used device, which may show signs of use and wear.
(minor scratches or yellowing).
The device is tested for function
A functional test is shown in the photo
The device is off 10/2018
2 devices available!
...
Length: 1250 mm
Width: 1250 mm
table diameter: 1250 mm
weight of the machine ca.: ca.3,5 t
space requirements of the machine approx.: L:1,7 x B:1,5 x H:0,5 m
MAGNETIC - ROUND- TABLE
- It has been mounted on the lower case of a discus grinding machine.
- It can be equipped wit a manual or an NC control against extra chrages.
- Height of magnet plate= 200mm
S8vwdvxjr
Computer cabinet, server cabinet, control cabinet, network server cabinet, computer case
Dux0tw3x
-Housing made of: aluminum stainless steel
-with: monitor housing
-Dimensions: 790/655/H1475 mm
-Weight: 86 kg
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
Ced7knjc
• Safe payment methods with possibility to pay at delivery
2016 - Hamm H18iP H202 | Used Single Drum Roller with vibratory pad foot drum, rear camera, DPF, manual central lubrication, and a Deutz engine.
CE marked: Yes
EPA marked: Yes
40 Inspection points
35 Approved
5 Imperfections
0 Issues
Contact us for more information and a FULL INSPECT...
Case maker - Crease and Presser Horizon HCM-1/HCP-1
Year 2009 - HCM-1/HCP-1 Serial-No. 312002
Description HCM-1:
Book Block size min. 133.7x136.7mm, max. 297 x 215,9mm
Cover Material min. 169.7x322x4mm, max. 333x502.8mm
Front
Bi0ecnomql
Technical data on the cross wrapping line:
Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland
Type CDW 2200 LW 750-1-10
Year of construction 2015
Number of wrapped bales 796 pieces
Operating time only 3 days, exclusively by running-in process of the entire line during new installation
Wrapping time with 5 film layers approx. 60 seconds per bale
Bale dimensions (w x h x l) 1100 x 100 x 1400 - 1900 mm
Max. bale weight Bale weight 2,000 kg
Conveying and wrapping height of the system 1,200 mm
Max....
.: 9029
Equipment details:
Lifting capacity : 2500 kg
Lifting height : 115 mm
Mast type : None
Mast height : 690 mm
Length/width/roof height : 2400 / 525 / 1160 mm
Overall height : 1160 mm
Operating weight : 132 kg
**Other equipment information
2000mm tines
36 months factory warranty
Exchange service in case of warranty
European production
The GS series is the right solution for all manual transport applications. For the transport of delicate and fragile goods, such as glass or ceramics. The Pr...
General Location Bremen Condition Used Remarks The model Twister 5 with its 5 spiral duct pipes provides a heat output of 130 kW with cooling tower water, at an extraction temperature of 40°C it provides the output alone. Twister 5-5 spiral duct pipes for cooling tower water to 40°C by means of cooling tower water This heat exchanger system was also specially developed for pharmaceutical processes. Thus it meets all sterile technical requirements. Raised floors prevent contamination of the steri...
Thread cutting head with chaser jaws, thread cutting stock,
Tapping machine, pipe thread cutter
-Inch thread: 1/2 "-1 1/4" inch
-in: transport case
Bdfq2lzkuq
-Dimensions: 670/185/H95 mm
-Weight: 8.7 kg
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
• Safe payment methods with possibility to pay at delivery
2013 - Caterpillar 924K | Used Wheel Loader with 2500mm GP bucket, 4 auxiliary hydraulic lines, manual central lubrication, ROPS/FOPS cabin protection, DPF, rear camera, and a Caterpillar engine.
CE marked: Yes
EPA marked: Yes
49 Inspection points
45 Approved
4 Imperfections
0 Issues
Contac...
x-travel 1760 / 2 x 700 mm
y-travel 500 mm
z-travel 600 mm
control Siemens 840 D
tool taper SK 40 DIN69871A
tool changer for ... units 22
ball screw spindle, manufacturer Rexroth Star
measurement system Heidenhain
table surface area 2030 x 500 mm
Bjhirsl8dh
T-slots 5
spindle turning speed range 60 - 6000 U/min
working area height in Z 180 - 780 mm
power capacity 9 kW /100 % ED kW
total power requirement 28 kW
weight of the machine ca. 9 t
dimensions of the machine ca. 6700 x 2450 x 3000 mm...
Technical data of the bale opener line:
Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland
Type BO 4000
Year of manufacture 2015
Quantity of opened bales 674 pieces
Operating time only 3 days, exclusively by running in the entire line during new installation
Opening time approx. 45 seconds per bale
Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm
Max. Bale weight 2,000 kg
Conveying height of the system 1,400 mm
Max. Conveying width of the system 1,200 mm
Material to be opened RDF/MSW
...
.: 1010
Equipment details:
Lifting capacity : 2500 kg
Lifting height : 115 mm
Mast type : None
Mast height : 690 mm
Length/width/roof height : 1550 / 525 / 1160 mm
Overall height : 1160 mm
Operating weight : 65 kg
**Other equipment information:**
1150mm tines
36 months factory warranty
Exchange service in case of warranty
European production
The GS series is the right solution for all manual transport applications. For the transport of delicate and fragile goods, such as glass or ceramics. The ...
3D scanner EVATRONIX EVIXSCAN HEAVY DUTY QUADRO was manufactured in 2015 in Poland. The 3D scanner is used to measure the accuracy of made details. The scanner is offered with a rotary table and software for analyzing the accuracy of the workpiece (with a control computer), which is used instead of the CMM and measuring arm. It is a 3D scanner that is widely used. It can be used on production lines, in steel mills, foundries and even underground, etc. The scanner works perfectly with the EVERRIC...
Computer cabinet, server cabinet, control cabinet, network server cabinet, computer case
-Manufacturer: RITTAL
-Field of view
-Number: 1x cabinets available
-Price: per piece
Kjlwvtif
-Dimensions: 600/510/H630 mm
-Weight: 26 kg
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
• Money Back Guaranteed
• Safe payment methods with possibility to pay at delivery
2019 - Sany SY26U | Used Mini Excavator with 2.05m mono boom, 1.3m stick, ACB mechanical quick coupler; 1200mm ditching, 500mm GP, 300mm GP buckets by ACB; 2 hydraulic auxiliary lines, manual central lubrication, ROPS/FOPS cabin protection, and Yanmar engine.
CE marked: Yes
EPA marked: No
60 I...
Double sided pipe end brush deburring machine make SCHOELLER
Technical data:
pipe diameter 20 - 70 mm
smallest pipe length approx. 200 mm
largest pipe length approx. 2050 mm
brush pressure adjustable by hand wheel
brush height adjustable by hand wheel
Pipes are placed manually, after deburring process drop into a suitable container
suitable container
motorized adjustment of tube length (motor missing)
weight approx. 2000 kg
outer dimensions L x W x H 4500 x 1200 x 2200 mm
with
- control panel
- ...
Casemaker:
- board magazine
- centre strip infeed for the spine strip made of roll material
Bvv7q3luar
- cloth feeder for interval charging with pile magazine
- miss cloth control during the separation process
- glue application adjustment from outside of the machine
- viscosity control device
- pressing roller device for crease-free connection of the cover material with boards and spine strip
- device for producing padded cases
- automatic case counter
- single case request for contro...
.: 9028
Equipment details:
Lifting capacity : 2500 kg
Lifting height : 115 mm
Mast type : None
Mast height : 690 mm
Length/width/roof height : 1200 / 525 / 1160 mm
Overall height : 1160 mm
Operating weight : 57 kg
**Other equipment information
800mm tines
36 months factory warranty
Exchange service in case of warranty
European production
The GS series is the right solution for all manual transport applications. For the transport of delicate and fragile goods, such as glass or ceramics. The Prem...
Type: 90
Model: FAS 1550-1430
Material: S 235 JR according to EN 10025
Collection volume: 220 liters
MOT until July / 2022
Weight: 1450kg
Material: sheet steel
Dgmww7p
Special feature: self-closing in case of fire
Doors: full sheet metal wing doors
Capacity: 4 x 200 l barrel
Width: 1550mm
Height: 2315mm
Depth: 1430mm
Inside depth: 1275mm
Width inside: 1450mm
Inner height: 1761mm
Laser alignment device, leveling device, construction laser, cross laser, laser
-Laser with: accessories
Ihylnfrhe
-Number: 3x transport case
-Dimensions: 600/400/H190 mm 25 kg
-Dimensions: 400/320/H170 mm 8.7 kg
-Dimensions: 180/160/H135 mm 3.2 kg
-Weight: 36.9 kg
We are ACCEPTING OFFERS for this unit!Buying with Equippo is easy:
• Fully inspected machines
• Delivered to your jobsite
Bviwn9tvq3
• Money Back Guaranteed
• Safe payment methods with possibility to pay at delivery
2000 - O & K F106 | Used Motor Grader with MOBA GS-506 control system, front blade, center blade, ripper, manual central lubrication, and a Deutz engine.
CE marked: No
EPA marked: No
41 Inspection points
34 Approved
1 Imperfections
6 Issues
Contact us for more information and a FUL...
